From: Ching<[email protected]>
Rewrite interrupt service routine relate function to fix command timeout on controller very heavy loading.
Signed-off-by: Ching<[email protected]>
---
diff -uprN a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
--- a/drivers/scsi/arcmsr/arcmsr.h 2014-02-06 17:47:43.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr.h 2014-04-28 16:02:46.000000000 +0800
@@ -51,7 +51,7 @@ struct device_attribute;
#else
#define ARCMSR_MAX_FREECCB_NUM 320
#endif
-#define ARCMSR_DRIVER_VERSION "Driver Version 1.20.00.15 2010/08/05"
+#define ARCMSR_DRIVER_VERSION "v1.30.00.04-20140428"
#define ARCMSR_SCSI_INITIATOR_ID 255
#define ARCMSR_MAX_XFER_SECTORS 512
#define ARCMSR_MAX_XFER_SECTORS_B 4096
diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
--- a/drivers/scsi/arcmsr/arcmsr_hba.c 2014-04-03 17:29:03.000000000 +0800
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2014-04-28 15:58:34.000000000 +0800
@@ -1441,14 +1441,15 @@ static void arcmsr_hba_doorbell_isr(stru
uint32_t outbound_doorbell;
struct MessageUnit_A __iomem *reg = acb->pmuA;
outbound_doorbell = readl(®->outbound_doorbell);
- writel(outbound_doorbell, ®->outbound_doorbell);
- if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK) {
- arcmsr_iop2drv_data_wrote_handle(acb);
- }
-
- if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK) {
- arcmsr_iop2drv_data_read_handle(acb);
- }
+ do {
+ writel(outbound_doorbell, ®->outbound_doorbell);
+ if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK)
+ arcmsr_iop2drv_data_wrote_handle(acb);
+ if (outbound_doorbell & ARCMSR_OUTBOUND_IOP331_DATA_READ_OK)
+ arcmsr_iop2drv_data_read_handle(acb);
+ outbound_doorbell = readl(®->outbound_doorbell);
+ } while (outbound_doorbell & (ARCMSR_OUTBOUND_IOP331_DATA_WRITE_OK
+ | ARCMSR_OUTBOUND_IOP331_DATA_READ_OK));
}
static void arcmsr_hbc_doorbell_isr(struct AdapterControlBlock *pACB)
{
@@ -1462,17 +1463,19 @@ static void arcmsr_hbc_doorbell_isr(stru
*******************************************************************
*/
outbound_doorbell = readl(®->outbound_doorbell);
- writel(outbound_doorbell, ®->outbound_doorbell_clear);/*clear interrupt*/
- if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK) {
- arcmsr_iop2drv_data_wrote_handle(pACB);
- }
- if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK) {
- arcmsr_iop2drv_data_read_handle(pACB);
- }
- if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE) {
- arcmsr_hbc_message_isr(pACB); /* messenger of "driver to iop commands" */
- }
- return;
+ do {
+ writel(outbound_doorbell, ®->outbound_doorbell_clear);
+ readl(®->outbound_doorbell_clear);
+ if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK)
+ arcmsr_iop2drv_data_wrote_handle(pACB);
+ if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK)
+ arcmsr_iop2drv_data_read_handle(pACB);
+ if (outbound_doorbell & ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE)
+ arcmsr_hbc_message_isr(pACB);
+ outbound_doorbell = readl(®->outbound_doorbell);
+ } while (outbound_doorbell & (ARCMSR_HBCMU_IOP2DRV_DATA_WRITE_OK
+ | ARCMSR_HBCMU_IOP2DRV_DATA_READ_OK
+ | ARCMSR_HBCMU_IOP2DRV_MESSAGE_CMD_DONE));
}
static void arcmsr_hba_postqueue_isr(struct AdapterControlBlock *acb)
{
@@ -1521,21 +1524,22 @@ static void arcmsr_hbc_postqueue_isr(str
/* areca cdb command done */
/* Use correct offset and size for syncing */
- while (readl(&phbcmu->host_int_status) &
- ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR){
- /* check if command done with no error*/
- flag_ccb = readl(&phbcmu->outbound_queueport_low);
- ccb_cdb_phy = (flag_ccb & 0xFFFFFFF0);/*frame must be 32 bytes aligned*/
- arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset + ccb_cdb_phy);
- ccb = container_of(arcmsr_cdb, struct CommandControlBlock, arcmsr_cdb);
- error = (flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR_MODE1) ? true : false;
- /* check if command done with no error */
- arcmsr_drain_donequeue(acb, ccb, error);
- if (throttling == ARCMSR_HBC_ISR_THROTTLING_LEVEL) {
- writel(ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING, &phbcmu->inbound_doorbell);
- break;
- }
- throttling++;
+ while ((flag_ccb = readl(&phbcmu->outbound_queueport_low)) != 0xFFFFFFFF) {
+ ccb_cdb_phy = (flag_ccb & 0xFFFFFFF0);
+ arcmsr_cdb = (struct ARCMSR_CDB *)(acb->vir2phy_offset
+ + ccb_cdb_phy);
+ ccb = container_of(arcmsr_cdb, struct CommandControlBlock,
+ arcmsr_cdb);
+ error = (flag_ccb & ARCMSR_CCBREPLY_FLAG_ERROR_MODE1)
+ ? true : false;
+ /* check if command done with no error */
+ arcmsr_drain_donequeue(acb, ccb, error);
+ throttling++;
+ if (throttling == ARCMSR_HBC_ISR_THROTTLING_LEVEL) {
+ writel(ARCMSR_HBCMU_DRV2IOP_POSTQUEUE_THROTTLING,
+ &phbcmu->inbound_doorbell);
+ throttling = 0;
+ }
}
}
/*
@@ -1584,21 +1588,22 @@ static int arcmsr_handle_hba_isr(struct
struct MessageUnit_A __iomem *reg = acb->pmuA;
outbound_intstatus = readl(®->outbound_intstatus) &
acb->outbound_int_enable;
- if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT)) {
- return 1;
- }
- writel(outbound_intstatus, ®->outbound_intstatus);
- if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT) {
- arcmsr_hba_doorbell_isr(acb);
- }
- if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT) {
- arcmsr_hba_postqueue_isr(acb);
- }
- if(outbound_intstatus & ARCMSR_MU_OUTBOUND_MESSAGE0_INT) {
- /* messenger of "driver to iop commands" */
- arcmsr_hba_message_isr(acb);
- }
- return 0;
+ if (!(outbound_intstatus & ARCMSR_MU_OUTBOUND_HANDLE_INT))
+ return IRQ_NONE;
+ do {
+ writel(outbound_intstatus, ®->outbound_intstatus);
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_DOORBELL_INT)
+ arcmsr_hba_doorbell_isr(acb);
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_POSTQUEUE_INT)
+ arcmsr_hba_postqueue_isr(acb);
+ if (outbound_intstatus & ARCMSR_MU_OUTBOUND_MESSAGE0_INT)
+ arcmsr_hba_message_isr(acb);
+ outbound_intstatus = readl(®->outbound_intstatus) &
+ acb->outbound_int_enable;
+ } while (outbound_intstatus & (ARCMSR_MU_OUTBOUND_DOORBELL_INT
+ | ARCMSR_MU_OUTBOUND_POSTQUEUE_INT
+ | ARCMSR_MU_OUTBOUND_MESSAGE0_INT));
+ return IRQ_HANDLED;
}
static int arcmsr_handle_hbb_isr(struct AdapterControlBlock *acb)
@@ -1608,27 +1613,25 @@ static int arcmsr_handle_hbb_isr(struct
outbound_doorbell = readl(reg->iop2drv_doorbell) &
acb->outbound_int_enable;
if (!outbound_doorbell)
- return 1;
-
- writel(~outbound_doorbell, reg->iop2drv_doorbell);
- /*in case the last action of doorbell interrupt clearance is cached,
- this action can push HW to write down the clear bit*/
- readl(reg->iop2drv_doorbell);
- writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
- if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK) {
- arcmsr_iop2drv_data_wrote_handle(acb);
- }
- if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_READ_OK) {
- arcmsr_iop2drv_data_read_handle(acb);
- }
- if (outbound_doorbell & ARCMSR_IOP2DRV_CDB_DONE) {
- arcmsr_hbb_postqueue_isr(acb);
- }
- if(outbound_doorbell & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE) {
- /* messenger of "driver to iop commands" */
- arcmsr_hbb_message_isr(acb);
- }
- return 0;
+ return IRQ_NONE;
+ do {
+ writel(~outbound_doorbell, reg->iop2drv_doorbell);
+ writel(ARCMSR_DRV2IOP_END_OF_INTERRUPT, reg->drv2iop_doorbell);
+ if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_WRITE_OK)
+ arcmsr_iop2drv_data_wrote_handle(acb);
+ if (outbound_doorbell & ARCMSR_IOP2DRV_DATA_READ_OK)
+ arcmsr_iop2drv_data_read_handle(acb);
+ if (outbound_doorbell & ARCMSR_IOP2DRV_CDB_DONE)
+ arcmsr_hbb_postqueue_isr(acb);
+ if (outbound_doorbell & ARCMSR_IOP2DRV_MESSAGE_CMD_DONE)
+ arcmsr_hbb_message_isr(acb);
+ outbound_doorbell = readl(reg->iop2drv_doorbell) &
+ acb->outbound_int_enable;
+ } while (outbound_doorbell & (ARCMSR_IOP2DRV_DATA_WRITE_OK
+ | ARCMSR_IOP2DRV_DATA_READ_OK
+ | ARCMSR_IOP2DRV_CDB_DONE
+ | ARCMSR_IOP2DRV_MESSAGE_CMD_DONE));
+ return IRQ_HANDLED;
}
static int arcmsr_handle_hbc_isr(struct AdapterControlBlock *pACB)
@@ -1640,44 +1643,37 @@ static int arcmsr_handle_hbc_isr(struct
** check outbound intstatus
*********************************************
*/
- host_interrupt_status = readl(&phbcmu->host_int_status);
- if (!host_interrupt_status) {
- /*it must be share irq*/
- return 1;
- }
- /* MU ioctl transfer doorbell interrupts*/
- if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR) {
- arcmsr_hbc_doorbell_isr(pACB); /* messenger of "ioctl message read write" */
- }
- /* MU post queue interrupts*/
- if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR) {
- arcmsr_hbc_postqueue_isr(pACB); /* messenger of "scsi commands" */
- }
- return 0;
+ host_interrupt_status = readl(&phbcmu->host_int_status) &
+ (ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR |
+ ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR);
+ if (!host_interrupt_status)
+ return IRQ_NONE;
+ do {
+ if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR)
+ arcmsr_hbc_doorbell_isr(pACB);
+ /* MU post queue interrupts*/
+ if (host_interrupt_status & ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR)
+ arcmsr_hbc_postqueue_isr(pACB);
+ host_interrupt_status = readl(&phbcmu->host_int_status);
+ } while (host_interrupt_status & (ARCMSR_HBCMU_OUTBOUND_POSTQUEUE_ISR |
+ ARCMSR_HBCMU_OUTBOUND_DOORBELL_ISR));
+ return IRQ_HANDLED;
}
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb)
{
switch (acb->adapter_type) {
- case ACB_ADAPTER_TYPE_A: {
- if (arcmsr_handle_hba_isr(acb)) {
- return IRQ_NONE;
- }
- }
+ case ACB_ADAPTER_TYPE_A:
+ return arcmsr_handle_hba_isr(acb);
break;
-
- case ACB_ADAPTER_TYPE_B: {
- if (arcmsr_handle_hbb_isr(acb)) {
- return IRQ_NONE;
- }
- }
+ case ACB_ADAPTER_TYPE_B:
+ return arcmsr_handle_hbb_isr(acb);
break;
- case ACB_ADAPTER_TYPE_C: {
- if (arcmsr_handle_hbc_isr(acb)) {
- return IRQ_NONE;
- }
- }
+ case ACB_ADAPTER_TYPE_C:
+ return arcmsr_handle_hbc_isr(acb);
+ break;
+ default:
+ return IRQ_NONE;
}
- return IRQ_HANDLED;
}
static void arcmsr_iop_parking(struct AdapterControlBlock *acb)
On Wed, 2014-04-30 at 17:40 +0800, ching wrote:
> From: Ching<[email protected]>
>
> Rewrite interrupt service routine relate function to fix command
> timeout on controller very heavy loading.
OK, so I think you've confused us a bit. This looks to be an update of
your previous v1.4 patch set, yet it's now called v1.0?
Could you please include a cover letter as patch 0/x like you see
everyone else doing on the list? In this cover letter can you tell us
what the disposition of the previous feedback is and what other changes
have you done? You didn't reply to any of the comments, have have you
fixed them? It's very dispiriting to review 11 patches, give feedback
and not hear anything ... and then have to review an even longer set of
patches just to see if anything was done about your previous comments.
The less interactive you are with reviews, the less chance there is that
people will review updates ... without external reviewers, you go on a
very long backlog of things I have to review before the patches get in.
James