From: Wonjoon Lee <[email protected]>
The MAX98091 CODEC is the same as MAX98090 CODEC, but with an extra
microphone. Existing driver for MAX98090 CODEC already has support
for MAX98091 CODEC. Adding proper compatible string so that MAX98091
CODEC can be specified from device tree.
Signed-off-by: Wonjoon Lee <[email protected]>
Signed-off-by: Doug Anderson <[email protected]>
Signed-off-by: Tushar Behera <[email protected]>
---
Picked from https://chromium-review.googlesource.com/#/c/184091/
.../devicetree/bindings/sound/max98090.txt | 2 +-
sound/soc/codecs/max98090.c | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index a5e63fa..c454e67 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -4,7 +4,7 @@ This device supports I2C only.
Required properties:
-- compatible : "maxim,max98090".
+- compatible : "maxim,max98090" or "maxim,max98091".
- reg : The I2C address of the device.
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index f5fccc7..4f5534d 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -2460,12 +2460,14 @@ static const struct dev_pm_ops max98090_pm = {
static const struct i2c_device_id max98090_i2c_id[] = {
{ "max98090", MAX98090 },
+ { "max98091", MAX98091 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max98090_i2c_id);
static const struct of_device_id max98090_of_match[] = {
{ .compatible = "maxim,max98090", },
+ { .compatible = "maxim,max98091", },
{ }
};
MODULE_DEVICE_TABLE(of, max98090_of_match);
--
1.7.9.5
Peach-pi board has MAX98091 CODEC. Extend snow machine driver to support
this board.
Signed-off-by: Tushar Behera <[email protected]>
---
Documentation/devicetree/bindings/sound/snow.txt | 1 +
sound/soc/samsung/snow.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt
index 678b191..e0b7a82 100644
--- a/Documentation/devicetree/bindings/sound/snow.txt
+++ b/Documentation/devicetree/bindings/sound/snow.txt
@@ -3,6 +3,7 @@ Audio Binding for Snow boards
Required properties:
- compatible : Can be one of the following,
"google,snow-audio-max98090" or
+ "google,snow-audio-max98091" or
"google,snow-audio-max98095"
- samsung,i2s-controller: The phandle of the Samsung I2S controller
- samsung,audio-codec: The phandle of the audio codec
diff --git a/sound/soc/samsung/snow.c b/sound/soc/samsung/snow.c
index 014c177..8bbd348 100644
--- a/sound/soc/samsung/snow.c
+++ b/sound/soc/samsung/snow.c
@@ -103,6 +103,7 @@ static int snow_probe(struct platform_device *pdev)
static const struct of_device_id snow_of_match[] = {
{ .compatible = "google,snow-audio-max98090", },
+ { .compatible = "google,snow-audio-max98091", },
{ .compatible = "google,snow-audio-max98095", },
{},
};
--
1.7.9.5
Tushar,
On Fri, Jun 20, 2014 at 1:03 AM, Tushar Behera <[email protected]> wrote:
> Peach-pi board has MAX98091 CODEC. Extend snow machine driver to support
> this board.
>
> Signed-off-by: Tushar Behera <[email protected]>
> ---
> Documentation/devicetree/bindings/sound/snow.txt | 1 +
> sound/soc/samsung/snow.c | 1 +
> 2 files changed, 2 insertions(+)
Reviewed-by: Doug Anderson <[email protected]>
Tushar,
On Fri, Jun 20, 2014 at 1:03 AM, Tushar Behera <[email protected]> wrote:
> From: Wonjoon Lee <[email protected]>
>
> The MAX98091 CODEC is the same as MAX98090 CODEC, but with an extra
> microphone. Existing driver for MAX98090 CODEC already has support
> for MAX98091 CODEC. Adding proper compatible string so that MAX98091
> CODEC can be specified from device tree.
>
> Signed-off-by: Wonjoon Lee <[email protected]>
> Signed-off-by: Doug Anderson <[email protected]>
> Signed-off-by: Tushar Behera <[email protected]>
> ---
>
> Picked from https://chromium-review.googlesource.com/#/c/184091/
>
> .../devicetree/bindings/sound/max98090.txt | 2 +-
> sound/soc/codecs/max98090.c | 2 ++
> 2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
> index a5e63fa..c454e67 100644
> --- a/Documentation/devicetree/bindings/sound/max98090.txt
> +++ b/Documentation/devicetree/bindings/sound/max98090.txt
> @@ -4,7 +4,7 @@ This device supports I2C only.
>
> Required properties:
>
> -- compatible : "maxim,max98090".
> +- compatible : "maxim,max98090" or "maxim,max98091".
>
> - reg : The I2C address of the device.
>
> diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
> index f5fccc7..4f5534d 100644
> --- a/sound/soc/codecs/max98090.c
> +++ b/sound/soc/codecs/max98090.c
> @@ -2460,12 +2460,14 @@ static const struct dev_pm_ops max98090_pm = {
>
> static const struct i2c_device_id max98090_i2c_id[] = {
> { "max98090", MAX98090 },
> + { "max98091", MAX98091 },
optional: This would allow you to add some extra error checking in
max98090_probe() to make sure that the device-tree specified device
matched the device that was detected. That could be in a future
patch, though.
Reviewed-by: Doug Anderson <[email protected]>
On 06/21/2014 02:02 AM, Doug Anderson wrote:
> Tushar,
>
> On Fri, Jun 20, 2014 at 1:03 AM, Tushar Behera <[email protected]> wrote:
>> From: Wonjoon Lee <[email protected]>
>>
>> The MAX98091 CODEC is the same as MAX98090 CODEC, but with an extra
>> microphone. Existing driver for MAX98090 CODEC already has support
>> for MAX98091 CODEC. Adding proper compatible string so that MAX98091
>> CODEC can be specified from device tree.
>>
>> Signed-off-by: Wonjoon Lee <[email protected]>
>> Signed-off-by: Doug Anderson <[email protected]>
>> Signed-off-by: Tushar Behera <[email protected]>
>> ---
>>
>> Picked from https://chromium-review.googlesource.com/#/c/184091/
>>
>> .../devicetree/bindings/sound/max98090.txt | 2 +-
>> sound/soc/codecs/max98090.c | 2 ++
>> 2 files changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
>> index a5e63fa..c454e67 100644
>> --- a/Documentation/devicetree/bindings/sound/max98090.txt
>> +++ b/Documentation/devicetree/bindings/sound/max98090.txt
>> @@ -4,7 +4,7 @@ This device supports I2C only.
>>
>> Required properties:
>>
>> -- compatible : "maxim,max98090".
>> +- compatible : "maxim,max98090" or "maxim,max98091".
>>
>> - reg : The I2C address of the device.
>>
>> diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
>> index f5fccc7..4f5534d 100644
>> --- a/sound/soc/codecs/max98090.c
>> +++ b/sound/soc/codecs/max98090.c
>> @@ -2460,12 +2460,14 @@ static const struct dev_pm_ops max98090_pm = {
>>
>> static const struct i2c_device_id max98090_i2c_id[] = {
>> { "max98090", MAX98090 },
>> + { "max98091", MAX98091 },
>
> optional: This would allow you to add some extra error checking in
> max98090_probe() to make sure that the device-tree specified device
> matched the device that was detected. That could be in a future
> patch, though.
>
> Reviewed-by: Doug Anderson <[email protected]>
>
Okay. I will add that in a follow-up patch.
Thanks for reviewing.
--
Tushar Behera
On Fri, Jun 20, 2014 at 01:33:15PM +0530, Tushar Behera wrote:
> From: Wonjoon Lee <[email protected]>
>
> The MAX98091 CODEC is the same as MAX98090 CODEC, but with an extra
> microphone. Existing driver for MAX98090 CODEC already has support
> for MAX98091 CODEC. Adding proper compatible string so that MAX98091
> CODEC can be specified from device tree.
Applied, thanks.
On Fri, Jun 20, 2014 at 01:33:16PM +0530, Tushar Behera wrote:
> Peach-pi board has MAX98091 CODEC. Extend snow machine driver to support
> this board.
Applied, thanks.