Hi all,
Following the Emil suggestions to increase the chances of this getting reviewed
I added a per-patch changelog and I explicitly Cc (in the commit message) the
people who commented. I will also cut down the people from the to/cc list. If
someone is really interested to be there just ping me.
This patch set to introduces the anx7814 slimport transmitter driver. These
new series will replace the old series that can be found here [1]. The reason
why I introduce these new series is because the driver changed significantly.
The old approach used a polled state machine ans was not really well using the
kernel mode setting API. With this new driver I tried to use better the drm API
and use an interrupt driven model.
Wating for your new comments...
Changes since previous version:
- Add Acked-by: Rob Herring <[email protected]> for patch 0001
- Dan Carpenter:
- Fix missing error code
- Use meaningful names for goto exit paths
- Rob Herring:
- Rename cable-det-gpios for hpd-gpios as is more standard
- Fix HDMI output for HDMI input
- Use hpd instead cable_det as is the more standard name.
- Daniel Kurtz:
- Use regmap_bulk in aux_transfer
- Fix gpio reset polarity.
- Turn off v10 last so we mirror poweron sequence
- Fix some error paths.
- Remove mutex in anx78xx_detect
- kbuild:
- WARNING: PTR_ERR_OR_ZERO can be used
[1] https://lwn.net/Articles/666885/
Enric Balletbo i Serra (3):
of: Add vendor prefix for Analogix Semiconductor
devicetree: Add ANX7814 SlimPort transmitter binding.
drm: bridge: anx78xx: Add anx78xx driver support.
.../devicetree/bindings/vendor-prefixes.txt | 1 +
.../devicetree/bindings/video/bridge/anx7814.txt | 41 +
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/anx78xx.c | 1411 ++++++++++++++++++++
drivers/gpu/drm/bridge/anx78xx.h | 719 ++++++++++
6 files changed, 2181 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt
create mode 100644 drivers/gpu/drm/bridge/anx78xx.c
create mode 100644 drivers/gpu/drm/bridge/anx78xx.h
--
2.1.0
Analogix Semiconductor Inc. develops analog and mixed-signal devices for
digital media and communications interconnect applications.
Cc: Rob Herring <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
Acked-by: Rob Herring <[email protected]>
---
Changes since v1:
- Add Acked-by: Rob Herring <[email protected]>
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 86740d4..683320a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -22,6 +22,7 @@ amlogic Amlogic, Inc.
ampire Ampire Co., Ltd.
ams AMS AG
amstaos AMS-Taos Inc.
+analogix Analogix Semiconductor, Inc.
apm Applied Micro Circuits Corporation (APM)
aptina Aptina Imaging
arasan Arasan Chip Systems
--
2.1.0
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices.
Cc: Rob Herring <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
Changes since v1:
- Rob Herring:
- Rename cable-det-gpios for hpd-gpios as is more standard
- Fix HDMI output for HDMI input
.../devicetree/bindings/video/bridge/anx7814.txt | 41 ++++++++++++++++++++++
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/anx7814.txt b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
new file mode 100644
index 0000000..0ce4978
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/bridge/anx7814.txt
@@ -0,0 +1,41 @@
+Analogix ANX7814 SlimPort (Full-HD Transmitter)
+-----------------------------------------------
+
+The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
+designed for portable devices.
+
+Required properties:
+
+ - compatible : "analogix,anx7814"
+ - reg : I2C address of the device
+ - interrupt-parent : Should be the phandle of the interrupt controller
+ that services interrupts for this device
+ - interrupts : Should contain the INTP interrupt
+ - hpd-gpios : Which GPIO to use for hpd
+ - pd-gpios : Which GPIO to use for power down
+ - reset-gpios : Which GPIO to use for reset
+
+Optional properties:
+
+ - v10-gpios : Which GPIO to use for V10 control.
+ - Video port for HDMI input, using the DT bindings defined in [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+ anx7814: anx7814@38 {
+ compatible = "analogix,anx7814";
+ reg = <0x38>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
+ hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
+ pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
+ v10-gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
+ port {
+ anx7814_in: endpoint {
+ remote-endpoint = <&hdmi0_out>;
+ };
+ };
+ };
--
2.1.0
Although there are other chips from the same family that can reuse this
driver, at the moment we only tested ANX7814 chip.
The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
designed for portable devices. This driver adds initial support for HDMI
to DP pass-through mode.
Cc: Emil Velikov <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Dan Carpenter <[email protected]>
Cc: Daniel Kurtz <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
Changes since v1:
- Dan Carpenter:
- Fix missing error code
- Use meaningful names for goto exit paths
- Rob Herring:
- Use hpd instead cable_det as is the more standard name.
- Daniel Kurtz:
- Use regmap_bulk in aux_transfer
- Fix gpio reset polarity.
- Turn off v10 last so we mirror poweron sequence
- Fix some error paths.
- Remove mutex in anx78xx_detect
- kbuild:
- WARNING: PTR_ERR_OR_ZERO can be used
free any cached EDID on any plug event.
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/anx78xx.c | 1411 ++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/bridge/anx78xx.h | 719 +++++++++++++++++++
4 files changed, 2139 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/anx78xx.c
create mode 100644 drivers/gpu/drm/bridge/anx78xx.h
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 27e2022..0f595ae 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -40,4 +40,12 @@ config DRM_PARADE_PS8622
---help---
Parade eDP-LVDS bridge chip driver.
+config DRM_ANX78XX
+ tristate "Analogix ANX78XX bridge"
+ select DRM_KMS_HELPER
+ select REGMAP_I2C
+ ---help---
+ ANX78XX is a HD video transmitter chip over micro-USB connector
+ for smartphone device.
+
endmenu
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index f13c33d..8f0d69e 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
+obj-$(CONFIG_DRM_ANX78XX) += anx78xx.o
diff --git a/drivers/gpu/drm/bridge/anx78xx.c b/drivers/gpu/drm/bridge/anx78xx.c
new file mode 100644
index 0000000..995a2a7
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx.c
@@ -0,0 +1,1411 @@
+/*
+ * Copyright(c) 2016, Analogix Semiconductor.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Based on anx7808 driver obtained from chromeos with copyright:
+ * Copyright(c) 2013, Google Inc.
+ *
+ */
+#include <linux/async.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_edid.h>
+
+#include "anx78xx.h"
+
+#define I2C_NUM_ADDRESSES 5
+#define I2C_IDX_TX_P0 0
+#define I2C_IDX_TX_P1 1
+#define I2C_IDX_TX_P2 2
+#define I2C_IDX_RX_P0 3
+#define I2C_IDX_RX_P1 4
+
+#define XTAL_CLK 270 /* 27M */
+#define AUX_CH_BUFFER_SIZE 16
+#define AUX_WAIT_TIMEOUT_MS 15
+#define AUX_WAIT_INTERVAL_MS 1
+
+/*
+ * _wait_for - magic (register) wait macro
+ *
+ * Does the right thing for modeset paths when run under kdgb or similar atomic
+ * contexts. Note that it's important that we check the condition again after
+ * having timed out, since the timeout could be due to preemption or similar and
+ * we've never had a chance to check the condition before the timeout.
+ */
+#define _wait_for(COND, TO_MS, INTVL_MS) ({ \
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(TO_MS) + 1;\
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ if (!(COND)) \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ if (drm_can_sleep()) { \
+ usleep_range(INTVL_MS * 1000, \
+ (INTVL_MS + 1) * 1000); \
+ } else { \
+ cpu_relax(); \
+ } \
+ } \
+ ret__; \
+})
+
+#define wait_for(COND, TO_MS, INTVL_MS) _wait_for(COND, TO_MS, INTVL_MS)
+
+static const u8 anx78xx_i2c_addresses[] = {
+ [I2C_IDX_TX_P0] = TX_P0,
+ [I2C_IDX_TX_P1] = TX_P1,
+ [I2C_IDX_TX_P2] = TX_P2,
+ [I2C_IDX_RX_P0] = RX_P0,
+ [I2C_IDX_RX_P1] = RX_P1,
+};
+
+struct anx78xx_platform_data {
+ struct gpio_desc *gpiod_hpd;
+ struct gpio_desc *gpiod_pd;
+ struct gpio_desc *gpiod_reset;
+ struct gpio_desc *gpiod_v10;
+
+ int hpd_irq;
+ int intp_irq;
+};
+
+struct anx78xx {
+ struct drm_dp_aux aux;
+ struct drm_bridge bridge;
+ struct i2c_client *client;
+ struct edid *edid;
+ struct drm_connector connector;
+ struct drm_dp_link link;
+ struct anx78xx_platform_data pdata;
+ struct mutex lock;
+
+ /*
+ * I2C Slave addresses of ANX7814 are mapped as TX_P0, TX_P1, TX_P2,
+ * RX_P0 and RX_P1.
+ */
+ struct i2c_client *i2c_dummy[I2C_NUM_ADDRESSES];
+ struct regmap *map[I2C_NUM_ADDRESSES];
+
+ u16 chipid;
+ u8 dpcd[DP_RECEIVER_CAP_SIZE];
+
+ bool powered;
+};
+
+static int anx78xx_set_bits(struct regmap *map, u8 reg, u8 mask)
+{
+ return regmap_update_bits(map, reg, mask, mask);
+}
+
+static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
+{
+ return regmap_update_bits(map, reg, mask, 0);
+}
+
+static int anx78xx_aux_op_finished(struct anx78xx *anx78xx)
+{
+ int err;
+ unsigned int aux_ctrl;
+
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+ &aux_ctrl);
+ if (err)
+ return err;
+
+ if (aux_ctrl & SP_AUX_EN)
+ return -EAGAIN;
+
+ return 0;
+}
+
+static int anx78xx_aux_wait(struct anx78xx *anx78xx)
+{
+ int err;
+ unsigned int status;
+
+ err = wait_for(!anx78xx_aux_op_finished(anx78xx), AUX_WAIT_TIMEOUT_MS,
+ AUX_WAIT_INTERVAL_MS);
+ if (err) {
+ DRM_ERROR("Timed out waiting AUX to finish\n");
+ return -ETIMEDOUT;
+ }
+
+ /* Read the AUX channel access status */
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG,
+ &status);
+ if (err)
+ return err;
+
+ if (status & SP_AUX_STATUS) {
+ DRM_ERROR("Failed to read AUX channel: 0x%02x\n", status);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr)
+{
+ int err = 0;
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG,
+ addr & 0xff);
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG,
+ (addr & 0xff00) >> 8);
+
+ /*
+ * DP AUX CH Address Register #2, only update bits[3:0]
+ * [7:4] RESERVED
+ * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
+ */
+ err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_AUX_ADDR_19_16_REG,
+ SP_AUX_ADDR_19_16_MASK,
+ (addr & 0xf0000) >> 16);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
+ struct drm_dp_aux_msg *msg)
+{
+ int err = 0;
+ struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
+ u8 ctrl1 = msg->request;
+ u8 ctrl2 = SP_AUX_EN;
+ u8 *buffer = msg->buffer;
+
+ /* The DP AUX transmit and receive buffer has 16 bytes. */
+ if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
+ return -E2BIG;
+
+ /* Zero-sized messages specify address-only transactions. */
+ if (msg->size < 1)
+ ctrl2 |= SP_ADDR_ONLY;
+ else /* For non-zero-sized set the length field. */
+ ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
+
+ if ((msg->request & DP_AUX_I2C_READ) == 0) {
+ /* When WRITE | MOT write values to data buffer */
+ err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_BUF_DATA0_REG, buffer,
+ msg->size);
+ if (err)
+ return -EIO;
+ }
+
+ /* Write address and request */
+ err |= anx78xx_aux_address(anx78xx, msg->address);
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG,
+ ctrl1);
+ if (err)
+ return -EIO;
+
+ /* Start transaction */
+ err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY |
+ SP_AUX_EN, ctrl2);
+ if (err)
+ return -EIO;
+
+ err = anx78xx_aux_wait(anx78xx);
+
+ msg->reply = err ? DP_AUX_I2C_REPLY_NACK : DP_AUX_I2C_REPLY_ACK;
+
+ if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
+ /* Read values from data buffer */
+ err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_BUF_DATA0_REG, buffer,
+ msg->size);
+ if (err)
+ return -EIO;
+ }
+
+ err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
+ if (err)
+ return -EIO;
+
+ return msg->size;
+}
+
+static int anx78xx_set_hpd(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+ SP_HPD_OUT);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static int anx78xx_clear_hpd(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
+ SP_HPD_OUT);
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static const struct reg_sequence tmds_phy_initialization[] = {
+ { SP_TMDS_CTRL_BASE + 1, 0x90 },
+ { SP_TMDS_CTRL_BASE + 2, 0xa9 },
+ { SP_TMDS_CTRL_BASE + 6, 0x92 },
+ { SP_TMDS_CTRL_BASE + 7, 0x80 },
+ { SP_TMDS_CTRL_BASE + 20, 0xf2 },
+ { SP_TMDS_CTRL_BASE + 22, 0xc4 },
+ { SP_TMDS_CTRL_BASE + 23, 0x18 },
+};
+
+static int anx78xx_rx_initialization(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+ SP_AUD_MUTE | SP_VID_MUTE);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_CHIP_CTRL_REG,
+ SP_MAN_HDMI5V_DET | SP_PLLLOCK_CKDT_EN |
+ SP_DIGITAL_CKDT_EN);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+ SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
+ SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
+
+ /* Sync detect change, GP set mute */
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_AUD_EXCEPTION_ENABLE_BASE + 1, BIT(5) |
+ BIT(6));
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_AUD_EXCEPTION_ENABLE_BASE + 3,
+ SP_AEC_EN21);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_AUDVID_CTRL_REG,
+ SP_AVC_EN | SP_AAC_OE | SP_AAC_EN);
+
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_SYSTEM_POWER_DOWN1_REG, SP_PWDN_CTRL);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
+ SP_VID_DATA_RANGE_CTRL_REG, SP_R2Y_INPUT_LIMIT);
+
+ /* Enable DDC stretch */
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_EXTRA_I2C_DEV_ADDR_REG, SP_I2C_EXTRA_ADDR);
+
+ /* TMDS phy initialization */
+ err |= regmap_multi_reg_write(anx78xx->map[I2C_IDX_RX_P0],
+ tmds_phy_initialization,
+ ARRAY_SIZE(tmds_phy_initialization));
+
+ err |= anx78xx_clear_hpd(anx78xx);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static const u8 dp_tx_output_precise_tune_bits[20] = {
+ 0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f,
+ 0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00,
+ 0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e,
+};
+
+static int anx78xx_link_phy_initialization(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ /*
+ * REVISIT : It is writing to a RESERVED bits in Analog Control 0
+ * register.
+ */
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_ANALOG_CTRL0_REG,
+ 0x02);
+
+ /*
+ * Write DP TX output emphasis precise tune bits.
+ */
+ err |= regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P1],
+ SP_DP_TX_LT_CTRL0_REG,
+ dp_tx_output_precise_tune_bits,
+ ARRAY_SIZE(dp_tx_output_precise_tune_bits));
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static int anx78xx_xtal_clk_sel(struct anx78xx *anx78xx)
+{
+ int err = 0;
+ unsigned int regval;
+
+ err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P2],
+ SP_ANALOG_DEBUG2_REG,
+ SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS,
+ SP_XTAL_FRQ_27M);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL3_REG,
+ XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL4_REG,
+ ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10));
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_I2C_GEN_10US_TIMER0_REG, XTAL_CLK & 0xff);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_I2C_GEN_10US_TIMER1_REG,
+ (XTAL_CLK & 0xff00) >> 8);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_MISC_CTRL_REG,
+ XTAL_CLK / 10 - 1);
+
+ err |= regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+ SP_HDMI_US_TIMER_CTRL_REG,
+ ®val);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0],
+ SP_HDMI_US_TIMER_CTRL_REG,
+ (regval & SP_MS_TIMER_MARGIN_10_8_MASK) |
+ ((((XTAL_CLK / 10) >> 1) - 2) << 3));
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static const struct reg_sequence otp_key_protect[] = {
+ { SP_OTP_KEY_PROTECT1_REG, SP_OTP_PSW1 },
+ { SP_OTP_KEY_PROTECT2_REG, SP_OTP_PSW2 },
+ { SP_OTP_KEY_PROTECT3_REG, SP_OTP_PSW3 },
+};
+
+static int anx78xx_tx_initialization(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ /* Set terminal resistor to 50 ohm */
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
+ 0x30);
+
+ /* Enable aux double diff output */
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_AUX_CH_CTRL2_REG, 0x08);
+
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_HDCP_CTRL_REG, SP_AUTO_EN |
+ SP_AUTO_START);
+
+ err |= regmap_multi_reg_write(anx78xx->map[I2C_IDX_TX_P0],
+ otp_key_protect,
+ ARRAY_SIZE(otp_key_protect));
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_HDCP_KEY_COMMAND_REG, SP_DISABLE_SYNC_HDCP);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL8_REG,
+ SP_VID_VRES_TH);
+
+ /*
+ * DP HDCP auto authentication wait timer (when downstream starts to
+ * auth, DP side will wait for this period then do auth automatically)
+ */
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_HDCP_AUTO_TIMER_REG,
+ 0x00);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_LINK_DEBUG_CTRL_REG, SP_M_VID_DEBUG);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2],
+ SP_ANALOG_DEBUG2_REG, SP_POWERON_TIME_1P5MS);
+
+ err |= anx78xx_xtal_clk_sel(anx78xx);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_DEFER_CTRL_REG,
+ SP_DEFER_CTRL_EN | 0x0c);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_POLLING_CTRL_REG,
+ SP_AUTO_POLLING_DISABLE);
+
+ /*
+ * Short the link integrity check timer to speed up bstatus
+ * polling for HDCP CTS item 1A-07
+ */
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_MISC_CTRL_REG, SP_EQ_TRAINING_LOOP);
+
+ /* Power down the main link by default */
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+
+ err |= anx78xx_link_phy_initialization(anx78xx);
+
+ /* Gen m_clk with downspreading */
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_M_CALCULATION_CTRL_REG, SP_M_GEN_CLK_SEL);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static int anx78xx_enable_interrupts(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ /*
+ * BIT0: INT pin assertion polarity: 1 = assert high
+ * BIT1: INT pin output type: 0 = push/pull
+ */
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_INT_CTRL_REG, 0x01);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+ SP_COMMON_INT_MASK4_REG, SP_HPD_LOST | SP_HPD_PLUG);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_MASK1_REG,
+ SP_TRAINING_FINISH);
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_MASK1_REG,
+ SP_CKDT_CHG | SP_SCDT_CHG);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static void anx78xx_poweron(struct anx78xx *anx78xx)
+{
+ struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+
+ if (WARN_ON(anx78xx->powered))
+ return;
+
+ if (pdata->gpiod_v10) {
+ gpiod_set_value_cansleep(pdata->gpiod_v10, 1);
+ usleep_range(1000, 2000);
+ }
+
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+ usleep_range(1000, 2000);
+
+ gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
+ usleep_range(1000, 2000);
+
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
+
+ /* Power on registers module */
+ anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+ SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+ anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+ SP_REGISTER_PD | SP_TOTAL_PD);
+
+ anx78xx->powered = true;
+}
+
+static void anx78xx_poweroff(struct anx78xx *anx78xx)
+{
+ struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+
+ if (WARN_ON(!anx78xx->powered))
+ return;
+
+ gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
+ usleep_range(1000, 2000);
+
+ gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
+ usleep_range(1000, 2000);
+
+ if (pdata->gpiod_v10) {
+ gpiod_set_value_cansleep(pdata->gpiod_v10, 0);
+ usleep_range(1000, 2000);
+ }
+
+ anx78xx->powered = false;
+}
+
+static int anx78xx_start(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ /* Power on all modules */
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+ SP_POWERDOWN_CTRL_REG,
+ SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD |
+ SP_LINK_PD);
+
+ err |= anx78xx_enable_interrupts(anx78xx);
+ err |= anx78xx_rx_initialization(anx78xx);
+ err |= anx78xx_tx_initialization(anx78xx);
+
+ if (err) {
+ DRM_ERROR("Failed SlimPort transmitter initialization\n");
+ anx78xx_poweroff(anx78xx);
+ return -EIO;
+ }
+
+ /*
+ * This delay seems to help keep the hardware in a good state. Without
+ * it, there are times where it fails silently.
+ */
+ usleep_range(10000, 15000);
+
+ return 0;
+}
+
+static int anx78xx_init_gpio(struct anx78xx *anx78xx)
+{
+ struct device *dev = &anx78xx->client->dev;
+ struct anx78xx_platform_data *pdata = &anx78xx->pdata;
+
+ /* GPIO for hpd */
+ pdata->gpiod_hpd = devm_gpiod_get(dev, "hpd", GPIOD_IN);
+ if (IS_ERR(pdata->gpiod_hpd))
+ return PTR_ERR(pdata->gpiod_hpd);
+
+ /* GPIO for chip power down */
+ pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
+ if (IS_ERR(pdata->gpiod_pd))
+ return PTR_ERR(pdata->gpiod_pd);
+
+ /* GPIO for chip reset */
+ pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(pdata->gpiod_reset))
+ return PTR_ERR(pdata->gpiod_reset);
+
+ /* GPIO for V10 power control */
+ pdata->gpiod_v10 = devm_gpiod_get_optional(dev, "v10", GPIOD_OUT_LOW);
+
+ return PTR_ERR_OR_ZERO(pdata->gpiod_v10);
+}
+
+static int anx78xx_dp_link_training(struct anx78xx *anx78xx)
+{
+ int err = 0;
+ u8 dp_bw, regval;
+
+ err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
+ 0x0);
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+ SP_POWERDOWN_CTRL_REG,
+ SP_TOTAL_PD);
+ if (err)
+ return -EIO;
+
+ err = drm_dp_dpcd_readb(&anx78xx->aux, DP_MAX_LINK_RATE, &dp_bw);
+ if (err < 0)
+ return err;
+
+ switch (dp_bw) {
+ case DP_LINK_BW_1_62:
+ case DP_LINK_BW_2_7:
+ case DP_LINK_BW_5_4:
+ break;
+ default:
+ DRM_DEBUG_KMS("Waiting to read DP bandwidth.\n");
+ return -EAGAIN;
+ }
+
+ err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+ SP_VIDEO_MUTE);
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
+ SP_VID_CTRL1_REG, SP_VIDEO_EN);
+ if (err)
+ return -EIO;
+
+ /* Get dpcd info */
+ err = drm_dp_dpcd_read(&anx78xx->aux, DP_DPCD_REV,
+ &anx78xx->dpcd, DP_RECEIVER_CAP_SIZE);
+ if (err < 0) {
+ DRM_ERROR("Failed to read DPCD\n");
+ return err;
+ }
+
+ /* Clear channel x SERDES power down */
+ err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
+ if (err)
+ return -EIO;
+
+ /* Check link capabilities */
+ err = drm_dp_link_probe(&anx78xx->aux, &anx78xx->link);
+ if (err < 0) {
+ DRM_ERROR("Failed to probe link capabilities\n");
+ return err;
+ }
+
+ /* Power up the sink */
+ err = drm_dp_link_power_up(&anx78xx->aux, &anx78xx->link);
+ if (err < 0) {
+ DRM_ERROR("Failed to power up DisplayPort link\n");
+ return err;
+ }
+
+ /* Possibly enable downspread on the sink */
+ err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_DOWNSPREAD_CTRL1_REG, 0);
+ if (err)
+ return -EIO;
+
+ if (anx78xx->dpcd[3] & 0x1) {
+ DRM_DEBUG("Enable downspread on the sink\n");
+ /* 4000PPM */
+ err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_DOWNSPREAD_CTRL1_REG, 8);
+ if (err)
+ return -EIO;
+
+ err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL,
+ DP_SPREAD_AMP_0_5);
+ if (err < 0)
+ return err;
+ } else {
+ err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, 0);
+ if (err < 0)
+ return err;
+ }
+
+ /* Set the lane count and the link rate on the sink */
+ if (drm_dp_enhanced_frame_cap(anx78xx->dpcd))
+ err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_SYSTEM_CTRL_BASE + 4,
+ SP_ENHANCED_MODE);
+ else
+ err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_SYSTEM_CTRL_BASE + 4,
+ SP_ENHANCED_MODE);
+ if (err)
+ return -EIO;
+
+ regval = drm_dp_link_rate_to_bw_code(anx78xx->link.rate);
+ err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
+ SP_DP_MAIN_LINK_BW_SET_REG, regval);
+ if (err)
+ return -EIO;
+
+ err = drm_dp_link_configure(&anx78xx->aux, &anx78xx->link);
+ if (err < 0) {
+ DRM_ERROR("Failed to configure DisplayPort link\n");
+ return err;
+ }
+
+ /* Start training on the source */
+ err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_LT_CTRL_REG,
+ SP_LT_EN);
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static int anx78xx_config_dp_output(struct anx78xx *anx78xx)
+{
+ int err = 0;
+
+ err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+ SP_VIDEO_MUTE);
+ /* Enable DP output */
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
+ SP_VIDEO_EN);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static int anx78xx_send_video_infoframe(struct anx78xx *anx78xx,
+ struct hdmi_avi_infoframe *frame)
+{
+ int err;
+ u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
+
+ err = hdmi_avi_infoframe_pack(frame, buffer, sizeof(buffer));
+ if (err < 0) {
+ DRM_ERROR("Failed to pack AVI infoframe: %d\n", err);
+ return err;
+ }
+
+ err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+
+ err |= regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P2],
+ SP_INFOFRAME_AVI_DB1_REG, buffer,
+ frame->length);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_UD);
+
+ err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
+ SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
+
+ if (err)
+ return -EIO;
+
+ return 0;
+}
+
+static inline struct anx78xx *
+ connector_to_anx78xx(struct drm_connector *connector)
+{
+ return container_of(connector, struct anx78xx, connector);
+}
+
+static int anx78xx_get_downstream_info(struct anx78xx *anx78xx)
+{
+ int err;
+ u8 regval;
+
+ err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SINK_COUNT, ®val);
+ if (err < 0) {
+ DRM_ERROR("Get sink count failed %d\n", err);
+ return err;
+ }
+
+ if (!DP_GET_SINK_COUNT(regval)) {
+ DRM_ERROR("Downstream disconnected\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int anx78xx_get_modes(struct drm_connector *connector)
+{
+ int err, num_modes = 0;
+ struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+ if (WARN_ON(!anx78xx->powered))
+ return 0;
+
+ if (anx78xx->edid)
+ return drm_add_edid_modes(connector, anx78xx->edid);
+
+ mutex_lock(&anx78xx->lock);
+
+ err = anx78xx_get_downstream_info(anx78xx);
+ if (err) {
+ DRM_ERROR("Failed to get downstream info: %d\n", err);
+ goto unlock;
+ }
+
+ anx78xx->edid = drm_get_edid(connector, &anx78xx->aux.ddc);
+ if (!anx78xx->edid) {
+ DRM_ERROR("Failed to read edid\n");
+ goto unlock;
+ }
+
+ err = drm_mode_connector_update_edid_property(connector,
+ anx78xx->edid);
+ if (err) {
+ DRM_ERROR("Failed to update edid property\n");
+ goto unlock;
+ }
+
+ num_modes = drm_add_edid_modes(connector, anx78xx->edid);
+ /* Store the ELD */
+ drm_edid_to_eld(connector, anx78xx->edid);
+
+unlock:
+ mutex_unlock(&anx78xx->lock);
+
+ return num_modes;
+}
+
+static struct drm_encoder *anx78xx_best_encoder(struct drm_connector *connector)
+{
+ struct anx78xx *anx78xx = connector_to_anx78xx(connector);
+
+ return anx78xx->bridge.encoder;
+}
+
+static const struct drm_connector_helper_funcs
+ anx78xx_connector_helper_funcs = {
+ .get_modes = anx78xx_get_modes,
+ .best_encoder = anx78xx_best_encoder,
+};
+
+static enum drm_connector_status anx78xx_detect(struct drm_connector *connector,
+ bool force)
+{
+ struct anx78xx *anx78xx = container_of(connector, struct anx78xx,
+ connector);
+
+ DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
+ connector->name);
+
+ if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd)) {
+ DRM_DEBUG_KMS("CONNECTOR STATUS DISCONNECTED\n");
+ return connector_status_disconnected;
+ }
+
+ return connector_status_connected;
+}
+
+static void anx78xx_connector_destroy(struct drm_connector *connector)
+{
+ drm_connector_cleanup(connector);
+}
+
+static const struct drm_connector_funcs anx78xx_connector_funcs = {
+ .dpms = drm_atomic_helper_connector_dpms,
+ .fill_modes = drm_helper_probe_single_connector_modes,
+ .detect = anx78xx_detect,
+ .destroy = anx78xx_connector_destroy,
+ .reset = drm_atomic_helper_connector_reset,
+ .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+ .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct anx78xx, bridge);
+}
+
+static int anx78xx_bridge_attach(struct drm_bridge *bridge)
+{
+ struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+ int err;
+
+ if (!bridge->encoder) {
+ DRM_ERROR("Parent encoder object not found");
+ return -ENODEV;
+ }
+
+ /* Register aux channel */
+ anx78xx->aux.name = "DP-AUX";
+ anx78xx->aux.dev = &anx78xx->client->dev;
+ anx78xx->aux.transfer = anx78xx_aux_transfer;
+
+ err = drm_dp_aux_register(&anx78xx->aux);
+ if (err < 0) {
+ DRM_ERROR("Failed to register aux channel: %d\n", err);
+ return err;
+ }
+
+ err = drm_connector_init(bridge->dev, &anx78xx->connector,
+ &anx78xx_connector_funcs,
+ DRM_MODE_CONNECTOR_DisplayPort);
+ if (err) {
+ DRM_ERROR("Failed to initialize connector: %d\n", err);
+ return err;
+ }
+
+ drm_connector_helper_add(&anx78xx->connector,
+ &anx78xx_connector_helper_funcs);
+
+ err = drm_connector_register(&anx78xx->connector);
+ if (err) {
+ DRM_ERROR("Failed to register connector: %d\n", err);
+ return err;
+ }
+
+ anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+ err = drm_mode_connector_attach_encoder(&anx78xx->connector,
+ bridge->encoder);
+ if (err) {
+ DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ return false;
+
+ /* Max 1200p at 5.4 Ghz, one lane */
+ if (mode->clock > 154000)
+ return false;
+
+ return true;
+}
+
+static void anx78xx_bridge_disable(struct drm_bridge *bridge) {
+ struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+ mutex_lock(&anx78xx->lock);
+
+ /* Power off all modules except configuration registers access */
+ anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
+ SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
+
+ mutex_unlock(&anx78xx->lock);
+}
+
+static void anx78xx_bridge_mode_set(struct drm_bridge *bridge,
+ struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ int err;
+ struct hdmi_avi_infoframe frame;
+ struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+ if (WARN_ON(!anx78xx->powered))
+ return;
+
+ mutex_lock(&anx78xx->lock);
+
+ mode = adjusted_mode;
+
+ err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
+ if (err) {
+ DRM_ERROR("Failed to setup AVI infoframe: %d\n", err);
+ goto unlock;
+ }
+
+ err = anx78xx_send_video_infoframe(anx78xx, &frame);
+ if (err)
+ DRM_ERROR("Failed to send AVI infoframe: %d\n", err);
+
+unlock:
+ mutex_unlock(&anx78xx->lock);
+}
+
+static void anx78xx_bridge_enable(struct drm_bridge *bridge) {
+ int err;
+ struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
+
+ mutex_lock(&anx78xx->lock);
+
+ err = anx78xx_start(anx78xx);
+ if (err)
+ DRM_ERROR("Failed to initialize: %d\n", err);
+
+ err = anx78xx_set_hpd(anx78xx);
+ if (err)
+ DRM_ERROR("Failed to set HPD: %d\n", err);
+
+ mutex_unlock(&anx78xx->lock);
+}
+
+static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
+ .attach = anx78xx_bridge_attach,
+ .mode_fixup = anx78xx_bridge_mode_fixup,
+ .disable = anx78xx_bridge_disable,
+ .mode_set = anx78xx_bridge_mode_set,
+ .enable = anx78xx_bridge_enable,
+};
+
+static irqreturn_t anx78xx_hpd_threaded_handler(int unused, void *data)
+{
+ int err;
+ struct anx78xx *anx78xx = data;
+
+ if (anx78xx->powered)
+ return IRQ_HANDLED;
+
+ mutex_lock(&anx78xx->lock);
+
+ /* Cable is pulled, power on the chip */
+ anx78xx_poweron(anx78xx);
+
+ err = anx78xx_enable_interrupts(anx78xx);
+ if (err)
+ DRM_ERROR("Failed to enable interrupts: %d\n", err);
+
+ mutex_unlock(&anx78xx->lock);
+
+ return IRQ_HANDLED;
+}
+
+static int anx78xx_handle_dp_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+ int err;
+
+ DRM_DEBUG_KMS("Handle DP interrupt 1: %02x\n", irq);
+
+ err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+ irq);
+ if (err)
+ return err;
+
+ if (irq & SP_TRAINING_FINISH) {
+ DRM_DEBUG_KMS("IRQ: hardware link training finished\n");
+ err = anx78xx_config_dp_output(anx78xx);
+ }
+
+ return err;
+}
+
+static bool anx78xx_handle_common_int_4(struct anx78xx *anx78xx, u8 irq)
+{
+ int err;
+ bool event = false;
+
+ DRM_DEBUG_KMS("Handle common interrupt 4: %02x\n", irq);
+
+ err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
+ SP_COMMON_INT_STATUS4_REG, irq);
+ if (err) {
+ DRM_ERROR("Failed to write SP_COMMON_INT_STATUS4 %d\n", err);
+ return event;
+ }
+
+ if (irq & SP_HPD_LOST) {
+ DRM_DEBUG_KMS("IRQ: Hot plug detect - cable is pulled out\n");
+ event = true;
+ anx78xx_poweroff(anx78xx);
+ } else if (irq & SP_HPD_PLUG) {
+ DRM_DEBUG_KMS("IRQ: Hot plug detect - cable plug\n");
+ event = true;
+ /* Free previous cached EDID if any */
+ kfree(anx78xx->edid);
+ anx78xx->edid = NULL;
+ }
+
+ return event;
+}
+
+static void anx78xx_handle_hdmi_int_1(struct anx78xx *anx78xx, u8 irq)
+{
+ int err;
+ unsigned int regval;
+
+ DRM_DEBUG_KMS("Handle HDMI interrupt 1: %02x\n", irq);
+
+ err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+ irq);
+ if (err) {
+ DRM_ERROR("Write hdmi int 1 failed %d\n", err);
+ return;
+ }
+
+ if ((irq & SP_CKDT_CHG) || (irq & SP_SCDT_CHG)) {
+ DRM_DEBUG_KMS("IRQ: HDMI input detected\n");
+ err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
+ SP_SYSTEM_STATUS_REG, ®val);
+ if (err) {
+ DRM_ERROR("Read system status reg failed %d\n", err);
+ return;
+ }
+
+ if (!(regval & SP_TMDS_CLOCK_DET)) {
+ DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI clock ***\n");
+ return;
+ }
+ if (!(regval & SP_TMDS_DE_DET)) {
+ DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI signal ***\n");
+ return;
+ }
+
+ err = anx78xx_dp_link_training(anx78xx);
+ if (err)
+ DRM_ERROR("Failed to start link training: %d\n", err);
+ }
+}
+
+static irqreturn_t anx78xx_intp_threaded_handler(int unused, void *data)
+{
+ struct anx78xx *anx78xx = data;
+ int err;
+ unsigned int irq;
+ bool event = false;
+
+ mutex_lock(&anx78xx->lock);
+
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
+ &irq);
+ if (err) {
+ DRM_ERROR("Failed to read dp int 1 status %d\n", err);
+ goto unlock;
+ } else if (irq) {
+ anx78xx_handle_dp_int_1(anx78xx, irq);
+ }
+
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P2],
+ SP_COMMON_INT_STATUS4_REG, &irq);
+ if (err) {
+ DRM_ERROR("Failed to read common int 4 status %d\n", err);
+ goto unlock;
+ } else if (irq) {
+ event = anx78xx_handle_common_int_4(anx78xx, irq);
+ }
+
+ /* Make sure we are still powered after handle HPD events */
+ if (!anx78xx->powered)
+ goto unlock;
+
+ err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
+ &irq);
+ if (err)
+ DRM_ERROR("Failed to read hdmi int 1 status %d\n", err);
+ else if (irq)
+ anx78xx_handle_hdmi_int_1(anx78xx, irq);
+
+unlock:
+ mutex_unlock(&anx78xx->lock);
+
+ if (event)
+ drm_helper_hpd_irq_event(anx78xx->connector.dev);
+
+ return IRQ_HANDLED;
+}
+
+static void unregister_i2c_dummy_clients(struct anx78xx *anx78xx)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(anx78xx->i2c_dummy); i++)
+ if (anx78xx->i2c_dummy[i])
+ i2c_unregister_device(anx78xx->i2c_dummy[i]);
+}
+
+static const struct regmap_config anx78xx_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const u16 anx78xx_chipid_list[] = {
+ 0x7812,
+ 0x7814,
+ 0x7818,
+};
+
+static int anx78xx_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct anx78xx *anx78xx;
+ struct anx78xx_platform_data *pdata;
+ int err, i;
+ unsigned int idl, idh, version;
+ bool found = false;
+
+ anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL);
+ if (!anx78xx)
+ return -ENOMEM;
+
+ pdata = &anx78xx->pdata;
+
+ mutex_init(&anx78xx->lock);
+
+#if IS_ENABLED(CONFIG_OF)
+ anx78xx->bridge.of_node = client->dev.of_node;
+#endif
+
+ anx78xx->client = client;
+ i2c_set_clientdata(client, anx78xx);
+
+ err = anx78xx_init_gpio(anx78xx);
+ if (err) {
+ DRM_ERROR("Failed to initialize gpios\n");
+ return err;
+ }
+
+ pdata->hpd_irq = gpiod_to_irq(pdata->gpiod_hpd);
+ if (pdata->hpd_irq < 0) {
+ DRM_ERROR("Failed to get hpd irq %d\n",
+ pdata->hpd_irq);
+ return -ENODEV;
+ }
+
+ pdata->intp_irq = client->irq;
+ if (!pdata->intp_irq) {
+ DRM_ERROR("Failed to get CABLE_DET and INTP irq\n");
+ return -ENODEV;
+ }
+
+ /* Map slave addresses of ANX7814 */
+ for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
+ anx78xx->i2c_dummy[i] = i2c_new_dummy(client->adapter,
+ anx78xx_i2c_addresses[i] >> 1);
+ if (!anx78xx->i2c_dummy[i]) {
+ err = -ENOMEM;
+ DRM_ERROR("Failed to reserve i2c bus %02x.\n",
+ anx78xx_i2c_addresses[i]);
+ goto err_unregister_i2c;
+ }
+
+ anx78xx->map[i] = devm_regmap_init_i2c(anx78xx->i2c_dummy[i],
+ &anx78xx_regmap_config);
+ if (IS_ERR(anx78xx->map[i])) {
+ err = PTR_ERR(anx78xx->map[i]);
+ DRM_ERROR("Failed regmap initialization %02x.\n",
+ anx78xx_i2c_addresses[i]);
+ goto err_unregister_i2c;
+ }
+ }
+
+ /* Look for supported chip id */
+ anx78xx_poweron(anx78xx);
+
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDL_REG,
+ &idl);
+ if (err)
+ goto err_poweroff;
+
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDH_REG,
+ &idh);
+ if (err)
+ goto err_poweroff;
+
+ anx78xx->chipid = (u8)idl | ((u8)idh << 8);
+
+ err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_VERSION_REG,
+ &version);
+ if (err)
+ goto err_poweroff;
+
+ for (i = 0; i < ARRAY_SIZE(anx78xx_chipid_list); i++) {
+ if (anx78xx->chipid == anx78xx_chipid_list[i]) {
+ DRM_INFO("Found ANX%x (ver. %d) SlimPort Transmitter\n",
+ anx78xx->chipid, version);
+ found = true;
+ break;
+ }
+ }
+
+ if (!found) {
+ DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
+ anx78xx->chipid, version);
+ err = -ENODEV;
+ goto err_poweroff;
+ }
+
+ err = devm_request_threaded_irq(&client->dev, pdata->hpd_irq,
+ NULL,
+ anx78xx_hpd_threaded_handler,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "anx78xx-hpd", anx78xx);
+ if (err) {
+ DRM_ERROR("Failed to request CABLE_DET threaded irq\n");
+ goto err_poweroff;
+ }
+
+ err = devm_request_threaded_irq(&client->dev, pdata->intp_irq, NULL,
+ anx78xx_intp_threaded_handler,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "anx78xx-intp", anx78xx);
+ if (err) {
+ DRM_ERROR("Failed to request INTP threaded irq\n");
+ goto err_poweroff;
+ }
+
+ anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
+ err = drm_bridge_add(&anx78xx->bridge);
+ if (err < 0) {
+ DRM_ERROR("Failed to add drm bridge\n");
+ goto err_poweroff;
+ }
+
+ /* If cable is pulled out, just poweroff and wait for hpd event */
+ if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
+ anx78xx_poweroff(anx78xx);
+
+ return 0;
+
+err_poweroff:
+ anx78xx_poweroff(anx78xx);
+
+err_unregister_i2c:
+ unregister_i2c_dummy_clients(anx78xx);
+ return err;
+}
+
+static int anx78xx_i2c_remove(struct i2c_client *client)
+{
+ struct anx78xx *anx78xx = i2c_get_clientdata(client);
+
+ drm_bridge_remove(&anx78xx->bridge);
+
+ unregister_i2c_dummy_clients(anx78xx);
+
+ kfree(anx78xx->edid);
+ anx78xx->edid = NULL;
+
+ return 0;
+}
+
+static const struct i2c_device_id anx78xx_id[] = {
+ {"anx7814", 0},
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(i2c, anx78xx_id);
+
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id anx78xx_match_table[] = {
+ {.compatible = "analogix,anx7814",},
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, anx78xx_match_table);
+#endif
+
+static struct i2c_driver anx78xx_driver = {
+ .driver = {
+ .name = "anx7814",
+ .of_match_table = of_match_ptr(anx78xx_match_table),
+ },
+ .probe = anx78xx_i2c_probe,
+ .remove = anx78xx_i2c_remove,
+ .id_table = anx78xx_id,
+};
+
+module_i2c_driver(anx78xx_driver);
+
+MODULE_DESCRIPTION("ANX78xx SlimPort Transmitter driver");
+MODULE_AUTHOR("Enric Balletbo i Serra <[email protected]>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/bridge/anx78xx.h b/drivers/gpu/drm/bridge/anx78xx.h
new file mode 100644
index 0000000..38753c8
--- /dev/null
+++ b/drivers/gpu/drm/bridge/anx78xx.h
@@ -0,0 +1,719 @@
+/*
+ * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ANX78xx_H
+#define __ANX78xx_H
+
+#define TX_P0 0x70
+#define TX_P1 0x7a
+#define TX_P2 0x72
+
+#define RX_P0 0x7e
+#define RX_P1 0x80
+
+/***************************************************************/
+/* Register definition of device address 0x7e */
+/***************************************************************/
+
+/*
+ * System Control and Status
+ */
+
+/* Software Reset Register 1 */
+#define SP_SOFTWARE_RESET1_REG 0x11
+#define SP_VIDEO_RST BIT(4)
+#define SP_HDCP_MAN_RST BIT(2)
+#define SP_TMDS_RST BIT(1)
+#define SP_SW_MAN_RST BIT(0)
+
+/* System Status Register */
+#define SP_SYSTEM_STATUS_REG 0x14
+#define SP_TMDS_CLOCK_DET BIT(1)
+#define SP_TMDS_DE_DET BIT(0)
+
+/* HDMI Status Register */
+#define SP_HDMI_STATUS_REG 0x15
+#define SP_HDMI_AUD_LAYOUT BIT(3)
+#define SP_HDMI_DET BIT(0)
+# define SP_DVI_MODE 0
+# define SP_HDMI_MODE 1
+
+/* HDMI Mute Control Register */
+#define SP_HDMI_MUTE_CTRL_REG 0x16
+#define SP_AUD_MUTE BIT(1)
+#define SP_VID_MUTE BIT(0)
+
+/* System Power Down Register 1 */
+#define SP_SYSTEM_POWER_DOWN1_REG 0x18
+#define SP_PWDN_CTRL BIT(0)
+
+/*
+ * Audio and Video Auto Control
+ */
+
+/* Auto Audio and Video Control register */
+#define SP_AUDVID_CTRL_REG 0x20
+#define SP_AVC_OE BIT(7)
+#define SP_AAC_OE BIT(6)
+#define SP_AVC_EN BIT(1)
+#define SP_AAC_EN BIT(0)
+
+/* Audio Exception Enable Registers */
+#define SP_AUD_EXCEPTION_ENABLE_BASE (0x24 - 1)
+/* Bits for Audio Exception Enable Register 3 */
+#define SP_AEC_EN21 BIT(5)
+
+/*
+ * Interrupt
+ */
+
+/* Interrupt Status Register 1 */
+#define SP_INT_STATUS1_REG 0x31
+/* Bits for Interrupt Status Register 1 */
+#define SP_HDMI_DVI BIT(7)
+#define SP_CKDT_CHG BIT(6)
+#define SP_SCDT_CHG BIT(5)
+#define SP_PCLK_CHG BIT(4)
+#define SP_PLL_UNLOCK BIT(3)
+#define SP_CABLE_PLUG_CHG BIT(2)
+#define SP_SET_MUTE BIT(1)
+#define SP_SW_INTR BIT(0)
+/* Bits for Interrupt Status Register 2 */
+#define SP_HDCP_ERR BIT(5)
+#define SP_AUDIO_SAMPLE_CHG BIT(0) /* undocumented */
+/* Bits for Interrupt Status Register 3 */
+#define SP_AUD_MODE_CHG BIT(0)
+/* Bits for Interrupt Status Register 5 */
+#define SP_AUDIO_RCV BIT(0)
+/* Bits for Interrupt Status Register 6 */
+#define SP_INT_STATUS6_REG 0x36
+#define SP_CTS_RCV BIT(7)
+#define SP_NEW_AUD_PKT BIT(4)
+#define SP_NEW_AVI_PKT BIT(1)
+#define SP_NEW_CP_PKT BIT(0)
+/* Bits for Interrupt Status Register 7 */
+#define SP_NO_VSI BIT(7)
+#define SP_NEW_VS BIT(4)
+
+/* Interrupt Mask 1 Status Registers */
+#define SP_INT_MASK1_REG 0x41
+
+/* HDMI US TIMER Control Register */
+#define SP_HDMI_US_TIMER_CTRL_REG 0x49
+#define SP_MS_TIMER_MARGIN_10_8_MASK 0x07
+
+/*
+ * TMDS Control
+ */
+
+/* TMDS Control Registers */
+#define SP_TMDS_CTRL_BASE (0x50 - 1)
+/* Bits for TMDS Control Register 7 */
+#define SP_PD_RT BIT(0)
+
+/*
+ * Video Control
+ */
+
+/* Video Status Register */
+#define SP_VIDEO_STATUS_REG 0x70
+#define SP_COLOR_DEPTH_MASK 0xf0
+#define SP_COLOR_DEPTH_SHIFT 4
+# define SP_COLOR_DEPTH_MODE_LEGACY 0x00
+# define SP_COLOR_DEPTH_MODE_24BIT 0x04
+# define SP_COLOR_DEPTH_MODE_30BIT 0x05
+# define SP_COLOR_DEPTH_MODE_36BIT 0x06
+# define SP_COLOR_DEPTH_MODE_48BIT 0x07
+
+/* Video Data Range Control Register */
+#define SP_VID_DATA_RANGE_CTRL_REG 0x83
+#define SP_R2Y_INPUT_LIMIT BIT(1)
+
+/* Pixel Clock High Resolution Counter Registers */
+#define SP_PCLK_HIGHRES_CNT_BASE (0x8c - 1)
+
+/*
+ * Audio Control
+ */
+
+/* Number of Audio Channels Status Registers */
+#define SP_AUD_CH_STATUS_REG_NUM 6
+
+/* Audio IN S/PDIF Channel Status Registers */
+#define SP_AUD_SPDIF_CH_STATUS_BASE 0xc7
+
+/* Audio IN S/PDIF Channel Status Register 4 */
+#define SP_FS_FREQ_MASK 0x0f
+# define SP_FS_FREQ_44100HZ 0x00
+# define SP_FS_FREQ_48000HZ 0x02
+# define SP_FS_FREQ_32000HZ 0x03
+# define SP_FS_FREQ_88200HZ 0x08
+# define SP_FS_FREQ_96000HZ 0x0a
+# define SP_FS_FREQ_176400HZ 0x0c
+# define SP_FS_FREQ_192000HZ 0x0e
+
+/*
+ * Micellaneous Control Block
+ */
+
+/* CHIP Control Register */
+#define SP_CHIP_CTRL_REG 0xe3
+#define SP_MAN_HDMI5V_DET BIT(3)
+#define SP_PLLLOCK_CKDT_EN BIT(2)
+#define SP_ANALOG_CKDT_EN BIT(1)
+#define SP_DIGITAL_CKDT_EN BIT(0)
+
+/* Packet Receiving Status Register */
+#define SP_PACKET_RECEIVING_STATUS_REG 0xf3
+#define SP_AVI_RCVD BIT(5)
+#define SP_VSI_RCVD BIT(1)
+
+/***************************************************************/
+/* Register definition of device address 0x80 */
+/***************************************************************/
+
+/* HDCP BCAPS Shadow Register */
+#define SP_HDCP_BCAPS_SHADOW_REG 0x2a
+#define SP_BCAPS_REPEATER BIT(5)
+
+/* HDCP Status Register */
+#define SP_RX_HDCP_STATUS_REG 0x3f
+#define SP_AUTH_EN BIT(4)
+
+/*
+ * InfoFrame and Control Packet Registers
+ */
+
+/* AVI InfoFrame packet checksum */
+#define SP_AVI_INFOFRAME_CHECKSUM 0xa3
+
+/* AVI InfoFrame Registers */
+#define SP_AVI_INFOFRAME_DATA_BASE 0xa4
+
+#define SP_AVI_COLOR_F_MASK 0x60
+#define SP_AVI_COLOR_F_SHIFT 5
+
+/* Audio InfoFrame Registers */
+#define SP_AUD_INFOFRAME_DATA_BASE 0xc4
+#define SP_AUD_INFOFRAME_LAYOUT_MASK 0x0f
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
+#define SP_MPEG_VS_INFOFRAME_TYPE_REG 0xe0
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
+#define SP_MPEG_VS_INFOFRAME_LEN_REG 0xe2
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
+#define SP_MPEG_VS_INFOFRAME_VER_REG 0xe1
+
+/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
+#define SP_MPEG_VS_INFOFRAME_DATA_BASE 0xe4
+
+/* General Control Packet Register */
+#define SP_GENERAL_CTRL_PACKET_REG 0x9f
+#define SP_CLEAR_AVMUTE BIT(4)
+#define SP_SET_AVMUTE BIT(0)
+
+/***************************************************************/
+/* Register definition of device address 0x70 */
+/***************************************************************/
+
+/* HDCP Status Register */
+#define SP_TX_HDCP_STATUS_REG 0x00
+#define SP_AUTH_FAIL BIT(5)
+#define SP_AUTHEN_PASS BIT(1)
+
+/* HDCP Control Register 0 */
+#define SP_HDCP_CTRL0_REG 0x01
+#define SP_RX_REPEATER BIT(6)
+#define SP_RE_AUTH BIT(5)
+#define SP_SW_AUTH_OK BIT(4)
+#define SP_HARD_AUTH_EN BIT(3)
+#define SP_HDCP_ENC_EN BIT(2)
+#define SP_BKSV_SRM_PASS BIT(1)
+#define SP_KSVLIST_VLD BIT(0)
+/* HDCP Function Enabled */
+#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* HDCP Receiver BSTATUS Register 0 */
+#define SP_HDCP_RX_BSTATUS0_REG 0x1b
+/* HDCP Receiver BSTATUS Register 1 */
+#define SP_HDCP_RX_BSTATUS1_REG 0x1c
+
+/* HDCP Embedded "Blue Screen" Content Registers */
+#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c
+#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d
+#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e
+
+/* HDCP Wait R0 Timing Register */
+#define SP_HDCP_WAIT_R0_TIME_REG 0x40
+
+/* HDCP Link Integrity Check Timer Register */
+#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41
+
+/* HDCP Repeater Ready Wait Timer Register */
+#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42
+
+/* HDCP Auto Timer Register */
+#define SP_HDCP_AUTO_TIMER_REG 0x51
+
+/* HDCP Key Status Register */
+#define SP_HDCP_KEY_STATUS_REG 0x5e
+
+/* HDCP Key Command Register */
+#define SP_HDCP_KEY_COMMAND_REG 0x5f
+#define SP_DISABLE_SYNC_HDCP BIT(2)
+
+/* OTP Memory Key Protection Registers */
+#define SP_OTP_KEY_PROTECT1_REG 0x60
+#define SP_OTP_KEY_PROTECT2_REG 0x61
+#define SP_OTP_KEY_PROTECT3_REG 0x62
+#define SP_OTP_PSW1 0xa2
+#define SP_OTP_PSW2 0x7e
+#define SP_OTP_PSW3 0xc6
+
+/* DP System Control Registers */
+#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1)
+/* Bits for DP System Control Register 2 */
+#define SP_CHA_STA BIT(2)
+/* Bits for DP System Control Register 3 */
+#define SP_HPD_STATUS BIT(6)
+#define SP_STRM_VALID BIT(2)
+/* Bits for DP System Control Register 4 */
+#define SP_ENHANCED_MODE BIT(3)
+
+/* DP Video Control Register */
+#define SP_DP_VIDEO_CTRL_REG 0x84
+#define SP_COLOR_F_MASK 0x06
+#define SP_COLOR_F_SHIFT 1
+#define SP_BPC_MASK 0xe0
+#define SP_BPC_SHIFT 5
+# define SP_BPC_6BITS 0x00
+# define SP_BPC_8BITS 0x01
+# define SP_BPC_10BITS 0x02
+# define SP_BPC_12BITS 0x03
+
+/* DP Audio Control Register */
+#define SP_DP_AUDIO_CTRL_REG 0x87
+#define SP_AUD_EN BIT(0)
+
+/* 10us Pulse Generate Timer Registers */
+#define SP_I2C_GEN_10US_TIMER0_REG 0x88
+#define SP_I2C_GEN_10US_TIMER1_REG 0x89
+
+/* Packet Send Control Register */
+#define SP_PACKET_SEND_CTRL_REG 0x90
+#define SP_AUD_IF_UP BIT(7)
+#define SP_AVI_IF_UD BIT(6)
+#define SP_MPEG_IF_UD BIT(5)
+#define SP_SPD_IF_UD BIT(4)
+#define SP_AUD_IF_EN BIT(3)
+#define SP_AVI_IF_EN BIT(2)
+#define SP_MPEG_IF_EN BIT(1)
+#define SP_SPD_IF_EN BIT(0)
+
+/* DP HDCP Control Register */
+#define SP_DP_HDCP_CTRL_REG 0x92
+#define SP_AUTO_EN BIT(7)
+#define SP_AUTO_START BIT(5)
+#define SP_LINK_POLLING BIT(1)
+
+/* DP Main Link Bandwidth Setting Register */
+#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0
+#define SP_LINK_BW_SET_MASK 0x1f
+#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
+
+/* DP Training Pattern Set Register */
+#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
+
+/* DP Lane 0 Link Training Control Register */
+#define SP_DP_LANE0_LT_CTRL_REG 0xa3
+#define SP_TX_SW_SET_MASK 0x1b
+#define SP_MAX_PRE_REACH BIT(5)
+#define SP_MAX_DRIVE_REACH BIT(4)
+#define SP_PRE_EMP_LEVEL1 BIT(3)
+#define SP_DRVIE_CURRENT_LEVEL1 BIT(0)
+
+/* DP Link Training Control Register */
+#define SP_DP_LT_CTRL_REG 0xa8
+#define SP_LT_ERROR_TYPE_MASK 0x70
+# define SP_LT_NO_ERROR 0x00
+# define SP_LT_AUX_WRITE_ERROR 0x01
+# define SP_LT_MAX_DRIVE_REACHED 0x02
+# define SP_LT_WRONG_LANE_COUNT_SET 0x03
+# define SP_LT_LOOP_SAME_5_TIME 0x04
+# define SP_LT_CR_FAIL_IN_EQ 0x05
+# define SP_LT_EQ_LOOP_5_TIME 0x06
+#define SP_LT_EN BIT(0)
+
+/* DP CEP Training Control Registers */
+#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9
+#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa
+
+/* DP Debug Register 1 */
+#define SP_DP_DEBUG1_REG 0xb0
+#define SP_DEBUG_PLL_LOCK BIT(4)
+#define SP_POLLING_EN BIT(1)
+
+/* DP Polling Control Register */
+#define SP_DP_POLLING_CTRL_REG 0xb4
+#define SP_AUTO_POLLING_DISABLE BIT(0)
+
+/* DP Link Debug Control Register */
+#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8
+#define SP_M_VID_DEBUG BIT(5)
+#define SP_NEW_PRBS7 BIT(4)
+#define SP_INSERT_ER BIT(1)
+#define SP_PRBS31_EN BIT(0)
+
+/* AUX Misc control Register */
+#define SP_AUX_MISC_CTRL_REG 0xbf
+
+/* DP PLL control Register */
+#define SP_DP_PLL_CTRL_REG 0xc7
+#define SP_PLL_RST BIT(6)
+
+/* DP Analog Power Down Register */
+#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8
+#define SP_CH0_PD BIT(0)
+
+/* DP Misc Control Register */
+#define SP_DP_MISC_CTRL_REG 0xcd
+#define SP_EQ_TRAINING_LOOP BIT(6)
+
+/* DP Extra I2C Device Address Register */
+#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce
+#define SP_I2C_STRETCH_DISABLE BIT(7)
+
+#define SP_I2C_EXTRA_ADDR 0x50
+
+/* DP Downspread Control Register 1 */
+#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0
+
+/* DP M Value Calculation Control Register */
+#define SP_DP_M_CALCULATION_CTRL_REG 0xd9
+#define SP_M_GEN_CLK_SEL BIT(0)
+
+/* AUX Channel Access Status Register */
+#define SP_AUX_CH_STATUS_REG 0xe0
+#define SP_AUX_STATUS 0x0f
+
+/* AUX Channel DEFER Control Register */
+#define SP_AUX_DEFER_CTRL_REG 0xe2
+#define SP_DEFER_CTRL_EN BIT(7)
+
+/* DP Buffer Data Count Register */
+#define SP_BUF_DATA_COUNT_REG 0xe4
+#define SP_BUF_DATA_COUNT_MASK 0x1f
+#define SP_BUF_CLR BIT(7)
+
+/* DP AUX Channel Control Register 1 */
+#define SP_DP_AUX_CH_CTRL1_REG 0xe5
+#define SP_AUX_TX_COMM_MASK 0x0f
+#define SP_AUX_LENGTH_MASK 0xf0
+#define SP_AUX_LENGTH_SHIFT 4
+
+/* DP AUX CH Address Register 0 */
+#define SP_AUX_ADDR_7_0_REG 0xe6
+
+/* DP AUX CH Address Register 1 */
+#define SP_AUX_ADDR_15_8_REG 0xe7
+
+/* DP AUX CH Address Register 2 */
+#define SP_AUX_ADDR_19_16_REG 0xe8
+#define SP_AUX_ADDR_19_16_MASK 0x0f
+
+/* DP AUX Channel Control Register 2 */
+#define SP_DP_AUX_CH_CTRL2_REG 0xe9
+#define SP_AUX_SEL_RXCM BIT(6)
+#define SP_AUX_CHSEL BIT(3)
+#define SP_AUX_PN_INV BIT(2)
+#define SP_ADDR_ONLY BIT(1)
+#define SP_AUX_EN BIT(0)
+
+/* DP Video Stream Control InfoFrame Register */
+#define SP_DP_3D_VSC_CTRL_REG 0xea
+#define SP_INFO_FRAME_VSC_EN BIT(0)
+
+/* DP Video Stream Data Byte 1 Register */
+#define SP_DP_VSC_DB1_REG 0xeb
+
+/* DP AUX Channel Control Register 3 */
+#define SP_DP_AUX_CH_CTRL3_REG 0xec
+#define SP_WAIT_COUNTER_7_0_MASK 0xff
+
+/* DP AUX Channel Control Register 4 */
+#define SP_DP_AUX_CH_CTRL4_REG 0xed
+
+/* DP AUX Buffer Data Registers */
+#define SP_DP_BUF_DATA0_REG 0xf0
+
+/***************************************************************/
+/* Register definition of device address 0x72 */
+/***************************************************************/
+
+/*
+ * Core Register Definitions
+ */
+
+/* Device ID Low Byte Register */
+#define SP_DEVICE_IDL_REG 0x02
+
+/* Device ID High Byte Register */
+#define SP_DEVICE_IDH_REG 0x03
+
+/* Device version register */
+#define SP_DEVICE_VERSION_REG 0x04
+
+/* Power Down Control Register */
+#define SP_POWERDOWN_CTRL_REG 0x05
+#define SP_REGISTER_PD BIT(7)
+#define SP_HDCP_PD BIT(5)
+#define SP_AUDIO_PD BIT(4)
+#define SP_VIDEO_PD BIT(3)
+#define SP_LINK_PD BIT(2)
+#define SP_TOTAL_PD BIT(1)
+
+/* Reset Control Register 1 */
+#define SP_RESET_CTRL1_REG 0x06
+#define SP_MISC_RST BIT(7)
+#define SP_VIDCAP_RST BIT(6)
+#define SP_VIDFIF_RST BIT(5)
+#define SP_AUDFIF_RST BIT(4)
+#define SP_AUDCAP_RST BIT(3)
+#define SP_HDCP_RST BIT(2)
+#define SP_SW_RST BIT(1)
+#define SP_HW_RST BIT(0)
+
+/* Reset Control Register 2 */
+#define SP_RESET_CTRL2_REG 0x07
+#define SP_AUX_RST BIT(2)
+#define SP_SERDES_FIFO_RST BIT(1)
+#define SP_I2C_REG_RST BIT(0)
+
+/* Video Control Register 1 */
+#define SP_VID_CTRL1_REG 0x08
+#define SP_VIDEO_EN BIT(7)
+#define SP_VIDEO_MUTE BIT(2)
+#define SP_DE_GEN BIT(1)
+#define SP_DEMUX BIT(0)
+
+/* Video Control Register 2 */
+#define SP_VID_CTRL2_REG 0x09
+#define SP_IN_COLOR_F_MASK 0x03
+#define SP_IN_YC_BIT_SEL BIT(2)
+#define SP_IN_BPC_MASK 0x70
+#define SP_IN_BPC_SHIFT 4
+# define SP_IN_BPC_12BIT 0x03
+# define SP_IN_BPC_10BIT 0x02
+# define SP_IN_BPC_8BIT 0x01
+# define SP_IN_BPC_6BIT 0x00
+#define SP_IN_D_RANGE BIT(7)
+
+/* Video Control Register 3 */
+#define SP_VID_CTRL3_REG 0x0a
+#define SP_HPD_OUT BIT(6)
+
+/* Video Control Register 5 */
+#define SP_VID_CTRL5_REG 0x0c
+#define SP_CSC_STD_SEL BIT(7)
+#define SP_XVYCC_RNG_LMT BIT(6)
+#define SP_RANGE_Y2R BIT(5)
+#define SP_CSPACE_Y2R BIT(4)
+#define SP_RGB_RNG_LMT BIT(3)
+#define SP_Y_RNG_LMT BIT(2)
+#define SP_RANGE_R2Y BIT(1)
+#define SP_CSPACE_R2Y BIT(0)
+
+/* Video Control Register 6 */
+#define SP_VID_CTRL6_REG 0x0d
+#define SP_TEST_PATTERN_EN BIT(7)
+#define SP_VIDEO_PROCESS_EN BIT(6)
+#define SP_VID_US_MODE BIT(3)
+#define SP_VID_DS_MODE BIT(2)
+#define SP_UP_SAMPLE BIT(1)
+#define SP_DOWN_SAMPLE BIT(0)
+
+/* Video Control Register 8 */
+#define SP_VID_CTRL8_REG 0x0f
+#define SP_VID_VRES_TH BIT(0)
+
+/* Total Line Status Low Byte Register */
+#define SP_TOTAL_LINE_STAL_REG 0x24
+
+/* Total Line Status High Byte Register */
+#define SP_TOTAL_LINE_STAH_REG 0x25
+
+/* Active Line Status Low Byte Register */
+#define SP_ACT_LINE_STAL_REG 0x26
+
+/* Active Line Status High Byte Register */
+#define SP_ACT_LINE_STAH_REG 0x27
+
+/* Vertical Front Porch Status Register */
+#define SP_V_F_PORCH_STA_REG 0x28
+
+/* Vertical SYNC Width Status Register */
+#define SP_V_SYNC_STA_REG 0x29
+
+/* Vertical Back Porch Status Register */
+#define SP_V_B_PORCH_STA_REG 0x2a
+
+/* Total Pixel Status Low Byte Register */
+#define SP_TOTAL_PIXEL_STAL_REG 0x2b
+
+/* Total Pixel Status High Byte Register */
+#define SP_TOTAL_PIXEL_STAH_REG 0x2c
+
+/* Active Pixel Status Low Byte Register */
+#define SP_ACT_PIXEL_STAL_REG 0x2d
+
+/* Active Pixel Status High Byte Register */
+#define SP_ACT_PIXEL_STAH_REG 0x2e
+
+/* Horizontal Front Porch Status Low Byte Register */
+#define SP_H_F_PORCH_STAL_REG 0x2f
+
+/* Horizontal Front Porch Statys High Byte Register */
+#define SP_H_F_PORCH_STAH_REG 0x30
+
+/* Horizontal SYNC Width Status Low Byte Register */
+#define SP_H_SYNC_STAL_REG 0x31
+
+/* Horizontal SYNC Width Status High Byte Register */
+#define SP_H_SYNC_STAH_REG 0x32
+
+/* Horizontal Back Porch Status Low Byte Register */
+#define SP_H_B_PORCH_STAL_REG 0x33
+
+/* Horizontal Back Porch Status High Byte Register */
+#define SP_H_B_PORCH_STAH_REG 0x34
+
+/* InfoFrame AVI Packet DB1 Register */
+#define SP_INFOFRAME_AVI_DB1_REG 0x70
+
+/* Bit Control Specific Register */
+#define SP_BIT_CTRL_SPECIFIC_REG 0x80
+#define SP_BIT_CTRL_SELECT_SHIFT 1
+#define SP_ENABLE_BIT_CTRL BIT(0)
+
+/* InfoFrame Audio Packet DB1 Register */
+#define SP_INFOFRAME_AUD_DB1_REG 0x83
+
+/* InfoFrame MPEG Packet DB1 Register */
+#define SP_INFOFRAME_MPEG_DB1_REG 0xb0
+
+/* Audio Channel Status Registers */
+#define SP_AUD_CH_STATUS_BASE 0xd0
+
+/* Audio Channel Num Register 5 */
+#define SP_I2S_CHANNEL_NUM_MASK 0xe0
+# define SP_I2S_CH_NUM_1 (0x00 << 5)
+# define SP_I2S_CH_NUM_2 (0x01 << 5)
+# define SP_I2S_CH_NUM_3 (0x02 << 5)
+# define SP_I2S_CH_NUM_4 (0x03 << 5)
+# define SP_I2S_CH_NUM_5 (0x04 << 5)
+# define SP_I2S_CH_NUM_6 (0x05 << 5)
+# define SP_I2S_CH_NUM_7 (0x06 << 5)
+# define SP_I2S_CH_NUM_8 (0x07 << 5)
+#define SP_EXT_VUCP BIT(2)
+#define SP_VBIT BIT(1)
+#define SP_AUDIO_LAYOUT BIT(0)
+
+/* Analog Debug Register 2 */
+#define SP_ANALOG_DEBUG2_REG 0xdd
+#define SP_FORCE_SW_OFF_BYPASS 0x20
+#define SP_XTAL_FRQ 0x1c
+# define SP_XTAL_FRQ_19M2 (0x00 << 2)
+# define SP_XTAL_FRQ_24M (0x01 << 2)
+# define SP_XTAL_FRQ_25M (0x02 << 2)
+# define SP_XTAL_FRQ_26M (0x03 << 2)
+# define SP_XTAL_FRQ_27M (0x04 << 2)
+# define SP_XTAL_FRQ_38M4 (0x05 << 2)
+# define SP_XTAL_FRQ_52M (0x06 << 2)
+#define SP_POWERON_TIME_1P5MS 0x03
+
+/* Analog Control 0 Register */
+#define SP_ANALOG_CTRL0_REG 0xe1
+
+/* Common Interrupt Status Register 1 */
+#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1)
+#define SP_PLL_LOCK_CHG 0x40
+
+/* Common Interrupt Status Register 2 */
+#define SP_COMMON_INT_STATUS2 0xf2
+#define SP_HDCP_AUTH_CHG BIT(1)
+#define SP_HDCP_AUTH_DONE BIT(0)
+
+#define SP_HDCP_LINK_CHECK_FAIL BIT(0)
+
+/* Common Interrupt Status Register 4 */
+#define SP_COMMON_INT_STATUS4_REG 0xf4
+#define SP_HPD_IRQ BIT(6)
+#define SP_HPD_ESYNC_ERR BIT(4)
+#define SP_HPD_CHG BIT(2)
+#define SP_HPD_LOST BIT(1)
+#define SP_HPD_PLUG BIT(0)
+
+/* DP Interrupt Status Register */
+#define SP_DP_INT_STATUS1_REG 0xf7
+#define SP_TRAINING_FINISH BIT(5)
+#define SP_POLLING_ERR BIT(4)
+
+/* Common Interrupt Mask Register */
+#define SP_COMMON_INT_MASK_BASE (0xf8 - 1)
+
+#define SP_COMMON_INT_MASK4_REG 0xfb
+
+/* DP Interrupts Mask Register */
+#define SP_DP_INT_MASK1_REG 0xfe
+
+/* Interrupt Control Register */
+#define SP_INT_CTRL_REG 0xff
+
+/***************************************************************/
+/* Register definition of device address 0x7a */
+/***************************************************************/
+
+/* DP TX Link Training Control Register */
+#define SP_DP_TX_LT_CTRL0_REG 0x30
+
+/* PD 1.2 Lint Training 80bit Pattern Register */
+#define SP_DP_LT_80BIT_PATTERN0_REG 0x80
+#define SP_DP_LT_80BIT_PATTERN_REG_NUM 10
+
+/* Audio Interface Control Register 0 */
+#define SP_AUD_INTERFACE_CTRL0_REG 0x5f
+#define SP_AUD_INTERFACE_DISABLE 0x80
+
+/* Audio Interface Control Register 2 */
+#define SP_AUD_INTERFACE_CTRL2_REG 0x60
+#define SP_M_AUD_ADJUST_ST 0x04
+
+/* Audio Interface Control Register 3 */
+#define SP_AUD_INTERFACE_CTRL3_REG 0x62
+
+/* Audio Interface Control Register 4 */
+#define SP_AUD_INTERFACE_CTRL4_REG 0x67
+
+/* Audio Interface Control Register 5 */
+#define SP_AUD_INTERFACE_CTRL5_REG 0x68
+
+/* Audio Interface Control Register 6 */
+#define SP_AUD_INTERFACE_CTRL6_REG 0x69
+
+/* Firmware Version Register */
+#define SP_FW_VER_REG 0xb7
+
+#endif
--
2.1.0
On Wed, Mar 30, 2016 at 06:22:23PM +0200, Enric Balletbo i Serra wrote:
> The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> designed for portable devices.
>
> Cc: Rob Herring <[email protected]>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
>
> Changes since v1:
> - Rob Herring:
> - Rename cable-det-gpios for hpd-gpios as is more standard
> - Fix HDMI output for HDMI input
>
> .../devicetree/bindings/video/bridge/anx7814.txt | 41 ++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/bridge/anx7814.txt
Acked-by: Rob Herring <[email protected]>
On Wed, Mar 30, 2016 at 06:22:24PM +0200, Enric Balletbo i Serra wrote:
> Although there are other chips from the same family that can reuse this
> driver, at the moment we only tested ANX7814 chip.
>
> The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> designed for portable devices. This driver adds initial support for HDMI
> to DP pass-through mode.
>
> Cc: Emil Velikov <[email protected]>
> Cc: Rob Herring <[email protected]>
> Cc: Dan Carpenter <[email protected]>
> Cc: Daniel Kurtz <[email protected]>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
Some minor nits below, otherwise:
Tested-by: Nicolas Boichat <[email protected]>
Reviewed-by: Nicolas Boichat <[email protected]>
> ---
>
> Changes since v1:
> - Dan Carpenter:
> - Fix missing error code
> - Use meaningful names for goto exit paths
> - Rob Herring:
> - Use hpd instead cable_det as is the more standard name.
> - Daniel Kurtz:
> - Use regmap_bulk in aux_transfer
> - Fix gpio reset polarity.
> - Turn off v10 last so we mirror poweron sequence
> - Fix some error paths.
> - Remove mutex in anx78xx_detect
> - kbuild:
> - WARNING: PTR_ERR_OR_ZERO can be used
>
> free any cached EDID on any plug event.
> drivers/gpu/drm/bridge/Kconfig | 8 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/anx78xx.c | 1411 ++++++++++++++++++++++++++++++++++++++
> drivers/gpu/drm/bridge/anx78xx.h | 719 +++++++++++++++++++
> 4 files changed, 2139 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/anx78xx.c
> create mode 100644 drivers/gpu/drm/bridge/anx78xx.h
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 27e2022..0f595ae 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -40,4 +40,12 @@ config DRM_PARADE_PS8622
> ---help---
> Parade eDP-LVDS bridge chip driver.
>
> +config DRM_ANX78XX
> + tristate "Analogix ANX78XX bridge"
> + select DRM_KMS_HELPER
> + select REGMAP_I2C
> + ---help---
> + ANX78XX is a HD video transmitter chip over micro-USB connector
> + for smartphone device.
> +
> endmenu
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index f13c33d..8f0d69e 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o
> obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o
> obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o
> obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
> +obj-$(CONFIG_DRM_ANX78XX) += anx78xx.o
> diff --git a/drivers/gpu/drm/bridge/anx78xx.c b/drivers/gpu/drm/bridge/anx78xx.c
> new file mode 100644
> index 0000000..995a2a7
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx.c
> @@ -0,0 +1,1411 @@
> +/*
> + * Copyright(c) 2016, Analogix Semiconductor.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Based on anx7808 driver obtained from chromeos with copyright:
> + * Copyright(c) 2013, Google Inc.
> + *
> + */
> +#include <linux/async.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_gpio.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +#include <linux/gpio/consumer.h>
> +#include <drm/drmP.h>
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_crtc_helper.h>
> +#include <drm/drm_dp_helper.h>
> +#include <drm/drm_edid.h>
> +
> +#include "anx78xx.h"
> +
> +#define I2C_NUM_ADDRESSES 5
> +#define I2C_IDX_TX_P0 0
> +#define I2C_IDX_TX_P1 1
> +#define I2C_IDX_TX_P2 2
> +#define I2C_IDX_RX_P0 3
> +#define I2C_IDX_RX_P1 4
> +
> +#define XTAL_CLK 270 /* 27M */
> +#define AUX_CH_BUFFER_SIZE 16
> +#define AUX_WAIT_TIMEOUT_MS 15
> +#define AUX_WAIT_INTERVAL_MS 1
> +
> +/*
> + * _wait_for - magic (register) wait macro
> + *
> + * Does the right thing for modeset paths when run under kdgb or similar atomic
> + * contexts. Note that it's important that we check the condition again after
> + * having timed out, since the timeout could be due to preemption or similar and
> + * we've never had a chance to check the condition before the timeout.
> + */
> +#define _wait_for(COND, TO_MS, INTVL_MS) ({ \
> + unsigned long timeout__ = jiffies + msecs_to_jiffies(TO_MS) + 1;\
> + int ret__ = 0; \
> + while (!(COND)) { \
> + if (time_after(jiffies, timeout__)) { \
> + if (!(COND)) \
> + ret__ = -ETIMEDOUT; \
> + break; \
> + } \
> + if (drm_can_sleep()) { \
> + usleep_range(INTVL_MS * 1000, \
> + (INTVL_MS + 1) * 1000); \
> + } else { \
> + cpu_relax(); \
> + } \
> + } \
> + ret__; \
> +})
> +
> +#define wait_for(COND, TO_MS, INTVL_MS) _wait_for(COND, TO_MS, INTVL_MS)
Since you only use this once, I'd rather you put a loop in the code,
rather than introducing this macro.
> +
> +static const u8 anx78xx_i2c_addresses[] = {
> + [I2C_IDX_TX_P0] = TX_P0,
> + [I2C_IDX_TX_P1] = TX_P1,
> + [I2C_IDX_TX_P2] = TX_P2,
> + [I2C_IDX_RX_P0] = RX_P0,
> + [I2C_IDX_RX_P1] = RX_P1,
> +};
> +
> +struct anx78xx_platform_data {
> + struct gpio_desc *gpiod_hpd;
> + struct gpio_desc *gpiod_pd;
> + struct gpio_desc *gpiod_reset;
> + struct gpio_desc *gpiod_v10;
> +
> + int hpd_irq;
> + int intp_irq;
> +};
> +
> +struct anx78xx {
> + struct drm_dp_aux aux;
> + struct drm_bridge bridge;
> + struct i2c_client *client;
> + struct edid *edid;
> + struct drm_connector connector;
> + struct drm_dp_link link;
> + struct anx78xx_platform_data pdata;
> + struct mutex lock;
> +
> + /*
> + * I2C Slave addresses of ANX7814 are mapped as TX_P0, TX_P1, TX_P2,
> + * RX_P0 and RX_P1.
> + */
> + struct i2c_client *i2c_dummy[I2C_NUM_ADDRESSES];
> + struct regmap *map[I2C_NUM_ADDRESSES];
> +
> + u16 chipid;
> + u8 dpcd[DP_RECEIVER_CAP_SIZE];
> +
> + bool powered;
> +};
> +
> +static int anx78xx_set_bits(struct regmap *map, u8 reg, u8 mask)
> +{
> + return regmap_update_bits(map, reg, mask, mask);
> +}
> +
> +static int anx78xx_clear_bits(struct regmap *map, u8 reg, u8 mask)
> +{
> + return regmap_update_bits(map, reg, mask, 0);
> +}
> +
> +static int anx78xx_aux_op_finished(struct anx78xx *anx78xx)
> +{
> + int err;
> + unsigned int aux_ctrl;
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
> + &aux_ctrl);
> + if (err)
> + return err;
> +
> + if (aux_ctrl & SP_AUX_EN)
> + return -EAGAIN;
> +
> + return 0;
> +}
> +
> +static int anx78xx_aux_wait(struct anx78xx *anx78xx)
> +{
> + int err;
> + unsigned int status;
> +
> + err = wait_for(!anx78xx_aux_op_finished(anx78xx), AUX_WAIT_TIMEOUT_MS,
> + AUX_WAIT_INTERVAL_MS);
> + if (err) {
> + DRM_ERROR("Timed out waiting AUX to finish\n");
> + return -ETIMEDOUT;
> + }
> +
> + /* Read the AUX channel access status */
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_CH_STATUS_REG,
> + &status);
> + if (err)
> + return err;
> +
> + if (status & SP_AUX_STATUS) {
> + DRM_ERROR("Failed to read AUX channel: 0x%02x\n", status);
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
> +
> +static int anx78xx_aux_address(struct anx78xx *anx78xx, unsigned int addr)
> +{
> + int err = 0;
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_7_0_REG,
> + addr & 0xff);
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_ADDR_15_8_REG,
> + (addr & 0xff00) >> 8);
> +
> + /*
> + * DP AUX CH Address Register #2, only update bits[3:0]
> + * [7:4] RESERVED
> + * [3:0] AUX_ADDR[19:16], Register control AUX CH address.
> + */
> + err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_AUX_ADDR_19_16_REG,
> + SP_AUX_ADDR_19_16_MASK,
> + (addr & 0xf0000) >> 16);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static ssize_t anx78xx_aux_transfer(struct drm_dp_aux *aux,
> + struct drm_dp_aux_msg *msg)
> +{
> + int err = 0;
> + struct anx78xx *anx78xx = container_of(aux, struct anx78xx, aux);
> + u8 ctrl1 = msg->request;
> + u8 ctrl2 = SP_AUX_EN;
> + u8 *buffer = msg->buffer;
> +
> + /* The DP AUX transmit and receive buffer has 16 bytes. */
> + if (WARN_ON(msg->size > AUX_CH_BUFFER_SIZE))
> + return -E2BIG;
> +
> + /* Zero-sized messages specify address-only transactions. */
> + if (msg->size < 1)
> + ctrl2 |= SP_ADDR_ONLY;
> + else /* For non-zero-sized set the length field. */
> + ctrl1 |= (msg->size - 1) << SP_AUX_LENGTH_SHIFT;
> +
> + if ((msg->request & DP_AUX_I2C_READ) == 0) {
> + /* When WRITE | MOT write values to data buffer */
> + err = regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_BUF_DATA0_REG, buffer,
> + msg->size);
> + if (err)
> + return -EIO;
> + }
> +
> + /* Write address and request */
> + err |= anx78xx_aux_address(anx78xx, msg->address);
err =
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL1_REG,
> + ctrl1);
> + if (err)
> + return -EIO;
> +
> + /* Start transaction */
> + err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P0],
err =
> + SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY |
> + SP_AUX_EN, ctrl2);
> + if (err)
> + return -EIO;
return err;
Do not replace the error code if it's readily available to you (many other
instances below).
> +
> + err = anx78xx_aux_wait(anx78xx);
> +
> + msg->reply = err ? DP_AUX_I2C_REPLY_NACK : DP_AUX_I2C_REPLY_ACK;
> +
> + if ((msg->size > 0) && (msg->request & DP_AUX_I2C_READ)) {
> + /* Read values from data buffer */
> + err = regmap_bulk_read(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_BUF_DATA0_REG, buffer,
> + msg->size);
> + if (err)
> + return -EIO;
> + }
> +
> + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_AUX_CH_CTRL2_REG, SP_ADDR_ONLY);
> + if (err)
> + return -EIO;
> +
> + return msg->size;
> +}
> +
> +static int anx78xx_set_hpd(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
> + SP_HPD_OUT);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int anx78xx_clear_hpd(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL3_REG,
> + SP_HPD_OUT);
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_TMDS_CTRL_BASE + 7, SP_PD_RT);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static const struct reg_sequence tmds_phy_initialization[] = {
> + { SP_TMDS_CTRL_BASE + 1, 0x90 },
> + { SP_TMDS_CTRL_BASE + 2, 0xa9 },
> + { SP_TMDS_CTRL_BASE + 6, 0x92 },
> + { SP_TMDS_CTRL_BASE + 7, 0x80 },
> + { SP_TMDS_CTRL_BASE + 20, 0xf2 },
> + { SP_TMDS_CTRL_BASE + 22, 0xc4 },
> + { SP_TMDS_CTRL_BASE + 23, 0x18 },
> +};
> +
> +static int anx78xx_rx_initialization(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
> + SP_AUD_MUTE | SP_VID_MUTE);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_CHIP_CTRL_REG,
> + SP_MAN_HDMI5V_DET | SP_PLLLOCK_CKDT_EN |
> + SP_DIGITAL_CKDT_EN);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
> + SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
> +
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_SOFTWARE_RESET1_REG, SP_HDCP_MAN_RST |
> + SP_SW_MAN_RST | SP_TMDS_RST | SP_VIDEO_RST);
> +
> + /* Sync detect change, GP set mute */
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_AUD_EXCEPTION_ENABLE_BASE + 1, BIT(5) |
> + BIT(6));
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_AUD_EXCEPTION_ENABLE_BASE + 3,
> + SP_AEC_EN21);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0], SP_AUDVID_CTRL_REG,
> + SP_AVC_EN | SP_AAC_OE | SP_AAC_EN);
> +
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_SYSTEM_POWER_DOWN1_REG, SP_PWDN_CTRL);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_RX_P0],
> + SP_VID_DATA_RANGE_CTRL_REG, SP_R2Y_INPUT_LIMIT);
> +
> + /* Enable DDC stretch */
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_EXTRA_I2C_DEV_ADDR_REG, SP_I2C_EXTRA_ADDR);
> +
> + /* TMDS phy initialization */
> + err |= regmap_multi_reg_write(anx78xx->map[I2C_IDX_RX_P0],
> + tmds_phy_initialization,
> + ARRAY_SIZE(tmds_phy_initialization));
> +
> + err |= anx78xx_clear_hpd(anx78xx);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static const u8 dp_tx_output_precise_tune_bits[20] = {
> + 0x01, 0x03, 0x07, 0x7f, 0x71, 0x6b, 0x7f,
> + 0x73, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00,
> + 0x0c, 0x42, 0x1e, 0x3e, 0x72, 0x7e,
> +};
> +
> +static int anx78xx_link_phy_initialization(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + /*
> + * REVISIT : It is writing to a RESERVED bits in Analog Control 0
> + * register.
> + */
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_ANALOG_CTRL0_REG,
> + 0x02);
> +
> + /*
> + * Write DP TX output emphasis precise tune bits.
> + */
> + err |= regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P1],
> + SP_DP_TX_LT_CTRL0_REG,
> + dp_tx_output_precise_tune_bits,
> + ARRAY_SIZE(dp_tx_output_precise_tune_bits));
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int anx78xx_xtal_clk_sel(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> + unsigned int regval;
> +
> + err |= regmap_update_bits(anx78xx->map[I2C_IDX_TX_P2],
> + SP_ANALOG_DEBUG2_REG,
> + SP_XTAL_FRQ | SP_FORCE_SW_OFF_BYPASS,
> + SP_XTAL_FRQ_27M);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL3_REG,
> + XTAL_CLK & SP_WAIT_COUNTER_7_0_MASK);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL4_REG,
> + ((XTAL_CLK & 0xff00) >> 2) | (XTAL_CLK / 10));
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_I2C_GEN_10US_TIMER0_REG, XTAL_CLK & 0xff);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_I2C_GEN_10US_TIMER1_REG,
> + (XTAL_CLK & 0xff00) >> 8);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_MISC_CTRL_REG,
> + XTAL_CLK / 10 - 1);
> +
> + err |= regmap_read(anx78xx->map[I2C_IDX_RX_P0],
> + SP_HDMI_US_TIMER_CTRL_REG,
> + ®val);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0],
> + SP_HDMI_US_TIMER_CTRL_REG,
> + (regval & SP_MS_TIMER_MARGIN_10_8_MASK) |
> + ((((XTAL_CLK / 10) >> 1) - 2) << 3));
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static const struct reg_sequence otp_key_protect[] = {
> + { SP_OTP_KEY_PROTECT1_REG, SP_OTP_PSW1 },
> + { SP_OTP_KEY_PROTECT2_REG, SP_OTP_PSW2 },
> + { SP_OTP_KEY_PROTECT3_REG, SP_OTP_PSW3 },
> +};
> +
> +static int anx78xx_tx_initialization(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + /* Set terminal resistor to 50 ohm */
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_AUX_CH_CTRL2_REG,
> + 0x30);
> +
> + /* Enable aux double diff output */
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_AUX_CH_CTRL2_REG, 0x08);
> +
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_HDCP_CTRL_REG, SP_AUTO_EN |
> + SP_AUTO_START);
> +
> + err |= regmap_multi_reg_write(anx78xx->map[I2C_IDX_TX_P0],
> + otp_key_protect,
> + ARRAY_SIZE(otp_key_protect));
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_HDCP_KEY_COMMAND_REG, SP_DISABLE_SYNC_HDCP);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL8_REG,
> + SP_VID_VRES_TH);
> +
> + /*
> + * DP HDCP auto authentication wait timer (when downstream starts to
> + * auth, DP side will wait for this period then do auth automatically)
> + */
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_HDCP_AUTO_TIMER_REG,
> + 0x00);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_HDCP_CTRL_REG, SP_LINK_POLLING);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_LINK_DEBUG_CTRL_REG, SP_M_VID_DEBUG);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2],
> + SP_ANALOG_DEBUG2_REG, SP_POWERON_TIME_1P5MS);
> +
> + err |= anx78xx_xtal_clk_sel(anx78xx);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_AUX_DEFER_CTRL_REG,
> + SP_DEFER_CTRL_EN | 0x0c);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_POLLING_CTRL_REG,
> + SP_AUTO_POLLING_DISABLE);
> +
> + /*
> + * Short the link integrity check timer to speed up bstatus
> + * polling for HDCP CTS item 1A-07
> + */
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_HDCP_LINK_CHECK_TIMER_REG, 0x1d);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_MISC_CTRL_REG, SP_EQ_TRAINING_LOOP);
> +
> + /* Power down the main link by default */
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
> +
> + err |= anx78xx_link_phy_initialization(anx78xx);
> +
> + /* Gen m_clk with downspreading */
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_M_CALCULATION_CTRL_REG, SP_M_GEN_CLK_SEL);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int anx78xx_enable_interrupts(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + /*
> + * BIT0: INT pin assertion polarity: 1 = assert high
> + * BIT1: INT pin output type: 0 = push/pull
> + */
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_INT_CTRL_REG, 0x01);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2],
> + SP_COMMON_INT_MASK4_REG, SP_HPD_LOST | SP_HPD_PLUG);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_MASK1_REG,
> + SP_TRAINING_FINISH);
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_MASK1_REG,
> + SP_CKDT_CHG | SP_SCDT_CHG);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static void anx78xx_poweron(struct anx78xx *anx78xx)
> +{
> + struct anx78xx_platform_data *pdata = &anx78xx->pdata;
> +
> + if (WARN_ON(anx78xx->powered))
> + return;
> +
> + if (pdata->gpiod_v10) {
> + gpiod_set_value_cansleep(pdata->gpiod_v10, 1);
> + usleep_range(1000, 2000);
> + }
> +
> + gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
> + usleep_range(1000, 2000);
> +
> + gpiod_set_value_cansleep(pdata->gpiod_pd, 0);
> + usleep_range(1000, 2000);
> +
> + gpiod_set_value_cansleep(pdata->gpiod_reset, 0);
> +
> + /* Power on registers module */
> + anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
> + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
> + anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
> + SP_REGISTER_PD | SP_TOTAL_PD);
> +
> + anx78xx->powered = true;
> +}
> +
> +static void anx78xx_poweroff(struct anx78xx *anx78xx)
> +{
> + struct anx78xx_platform_data *pdata = &anx78xx->pdata;
> +
> + if (WARN_ON(!anx78xx->powered))
> + return;
> +
> + gpiod_set_value_cansleep(pdata->gpiod_reset, 1);
> + usleep_range(1000, 2000);
> +
> + gpiod_set_value_cansleep(pdata->gpiod_pd, 1);
> + usleep_range(1000, 2000);
> +
> + if (pdata->gpiod_v10) {
> + gpiod_set_value_cansleep(pdata->gpiod_v10, 0);
> + usleep_range(1000, 2000);
> + }
> +
> + anx78xx->powered = false;
> +}
> +
> +static int anx78xx_start(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + /* Power on all modules */
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
> + SP_POWERDOWN_CTRL_REG,
> + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD |
> + SP_LINK_PD);
> +
> + err |= anx78xx_enable_interrupts(anx78xx);
> + err |= anx78xx_rx_initialization(anx78xx);
> + err |= anx78xx_tx_initialization(anx78xx);
> +
> + if (err) {
> + DRM_ERROR("Failed SlimPort transmitter initialization\n");
> + anx78xx_poweroff(anx78xx);
> + return -EIO;
> + }
> +
> + /*
> + * This delay seems to help keep the hardware in a good state. Without
> + * it, there are times where it fails silently.
> + */
> + usleep_range(10000, 15000);
> +
> + return 0;
> +}
> +
> +static int anx78xx_init_gpio(struct anx78xx *anx78xx)
> +{
> + struct device *dev = &anx78xx->client->dev;
> + struct anx78xx_platform_data *pdata = &anx78xx->pdata;
> +
> + /* GPIO for hpd */
> + pdata->gpiod_hpd = devm_gpiod_get(dev, "hpd", GPIOD_IN);
> + if (IS_ERR(pdata->gpiod_hpd))
> + return PTR_ERR(pdata->gpiod_hpd);
> +
> + /* GPIO for chip power down */
> + pdata->gpiod_pd = devm_gpiod_get(dev, "pd", GPIOD_OUT_HIGH);
> + if (IS_ERR(pdata->gpiod_pd))
> + return PTR_ERR(pdata->gpiod_pd);
> +
> + /* GPIO for chip reset */
> + pdata->gpiod_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->gpiod_reset))
> + return PTR_ERR(pdata->gpiod_reset);
> +
> + /* GPIO for V10 power control */
> + pdata->gpiod_v10 = devm_gpiod_get_optional(dev, "v10", GPIOD_OUT_LOW);
> +
> + return PTR_ERR_OR_ZERO(pdata->gpiod_v10);
> +}
> +
> +static int anx78xx_dp_link_training(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> + u8 dp_bw, regval;
> +
> + err |= regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_HDMI_MUTE_CTRL_REG,
> + 0x0);
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
> + SP_POWERDOWN_CTRL_REG,
> + SP_TOTAL_PD);
> + if (err)
> + return -EIO;
> +
> + err = drm_dp_dpcd_readb(&anx78xx->aux, DP_MAX_LINK_RATE, &dp_bw);
> + if (err < 0)
> + return err;
> +
> + switch (dp_bw) {
> + case DP_LINK_BW_1_62:
> + case DP_LINK_BW_2_7:
> + case DP_LINK_BW_5_4:
> + break;
> + default:
> + DRM_DEBUG_KMS("Waiting to read DP bandwidth.\n");
> + return -EAGAIN;
> + }
> +
> + err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
> + SP_VIDEO_MUTE);
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2],
> + SP_VID_CTRL1_REG, SP_VIDEO_EN);
> + if (err)
> + return -EIO;
> +
> + /* Get dpcd info */
> + err = drm_dp_dpcd_read(&anx78xx->aux, DP_DPCD_REV,
> + &anx78xx->dpcd, DP_RECEIVER_CAP_SIZE);
> + if (err < 0) {
> + DRM_ERROR("Failed to read DPCD\n");
> + return err;
> + }
> +
> + /* Clear channel x SERDES power down */
> + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_ANALOG_POWER_DOWN_REG, SP_CH0_PD);
> + if (err)
> + return -EIO;
> +
> + /* Check link capabilities */
> + err = drm_dp_link_probe(&anx78xx->aux, &anx78xx->link);
> + if (err < 0) {
> + DRM_ERROR("Failed to probe link capabilities\n");
> + return err;
> + }
> +
> + /* Power up the sink */
> + err = drm_dp_link_power_up(&anx78xx->aux, &anx78xx->link);
> + if (err < 0) {
> + DRM_ERROR("Failed to power up DisplayPort link\n");
> + return err;
> + }
> +
> + /* Possibly enable downspread on the sink */
> + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_DOWNSPREAD_CTRL1_REG, 0);
> + if (err)
> + return -EIO;
> +
> + if (anx78xx->dpcd[3] & 0x1) {
> + DRM_DEBUG("Enable downspread on the sink\n");
> + /* 4000PPM */
> + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_DOWNSPREAD_CTRL1_REG, 8);
> + if (err)
> + return -EIO;
> +
> + err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL,
> + DP_SPREAD_AMP_0_5);
> + if (err < 0)
> + return err;
> + } else {
> + err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_DOWNSPREAD_CTRL, 0);
> + if (err < 0)
> + return err;
> + }
> +
> + /* Set the lane count and the link rate on the sink */
> + if (drm_dp_enhanced_frame_cap(anx78xx->dpcd))
> + err = anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_SYSTEM_CTRL_BASE + 4,
> + SP_ENHANCED_MODE);
> + else
> + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_SYSTEM_CTRL_BASE + 4,
> + SP_ENHANCED_MODE);
> + if (err)
> + return -EIO;
> +
> + regval = drm_dp_link_rate_to_bw_code(anx78xx->link.rate);
> + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0],
> + SP_DP_MAIN_LINK_BW_SET_REG, regval);
> + if (err)
> + return -EIO;
> +
> + err = drm_dp_link_configure(&anx78xx->aux, &anx78xx->link);
> + if (err < 0) {
> + DRM_ERROR("Failed to configure DisplayPort link\n");
> + return err;
> + }
> +
> + /* Start training on the source */
> + err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], SP_DP_LT_CTRL_REG,
> + SP_LT_EN);
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int anx78xx_config_dp_output(struct anx78xx *anx78xx)
> +{
> + int err = 0;
> +
> + err |= anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
> + SP_VIDEO_MUTE);
> + /* Enable DP output */
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_VID_CTRL1_REG,
> + SP_VIDEO_EN);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int anx78xx_send_video_infoframe(struct anx78xx *anx78xx,
> + struct hdmi_avi_infoframe *frame)
> +{
> + int err;
> + u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE];
> +
> + err = hdmi_avi_infoframe_pack(frame, buffer, sizeof(buffer));
> + if (err < 0) {
> + DRM_ERROR("Failed to pack AVI infoframe: %d\n", err);
> + return err;
> + }
> +
> + err = anx78xx_clear_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
> +
> + err |= regmap_bulk_write(anx78xx->map[I2C_IDX_TX_P2],
> + SP_INFOFRAME_AVI_DB1_REG, buffer,
> + frame->length);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_UD);
> +
> + err |= anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P0],
> + SP_PACKET_SEND_CTRL_REG, SP_AVI_IF_EN);
> +
> + if (err)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static inline struct anx78xx *
> + connector_to_anx78xx(struct drm_connector *connector)
> +{
> + return container_of(connector, struct anx78xx, connector);
> +}
> +
> +static int anx78xx_get_downstream_info(struct anx78xx *anx78xx)
> +{
> + int err;
> + u8 regval;
> +
> + err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SINK_COUNT, ®val);
> + if (err < 0) {
> + DRM_ERROR("Get sink count failed %d\n", err);
> + return err;
> + }
> +
> + if (!DP_GET_SINK_COUNT(regval)) {
> + DRM_ERROR("Downstream disconnected\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +static int anx78xx_get_modes(struct drm_connector *connector)
> +{
> + int err, num_modes = 0;
> + struct anx78xx *anx78xx = connector_to_anx78xx(connector);
> +
> + if (WARN_ON(!anx78xx->powered))
> + return 0;
> +
> + if (anx78xx->edid)
> + return drm_add_edid_modes(connector, anx78xx->edid);
> +
> + mutex_lock(&anx78xx->lock);
> +
> + err = anx78xx_get_downstream_info(anx78xx);
> + if (err) {
> + DRM_ERROR("Failed to get downstream info: %d\n", err);
> + goto unlock;
> + }
> +
> + anx78xx->edid = drm_get_edid(connector, &anx78xx->aux.ddc);
> + if (!anx78xx->edid) {
> + DRM_ERROR("Failed to read edid\n");
> + goto unlock;
> + }
> +
> + err = drm_mode_connector_update_edid_property(connector,
> + anx78xx->edid);
> + if (err) {
> + DRM_ERROR("Failed to update edid property\n");
> + goto unlock;
> + }
> +
> + num_modes = drm_add_edid_modes(connector, anx78xx->edid);
> + /* Store the ELD */
> + drm_edid_to_eld(connector, anx78xx->edid);
> +
> +unlock:
> + mutex_unlock(&anx78xx->lock);
> +
> + return num_modes;
> +}
> +
> +static struct drm_encoder *anx78xx_best_encoder(struct drm_connector *connector)
> +{
> + struct anx78xx *anx78xx = connector_to_anx78xx(connector);
> +
> + return anx78xx->bridge.encoder;
> +}
> +
> +static const struct drm_connector_helper_funcs
> + anx78xx_connector_helper_funcs = {
> + .get_modes = anx78xx_get_modes,
> + .best_encoder = anx78xx_best_encoder,
> +};
> +
> +static enum drm_connector_status anx78xx_detect(struct drm_connector *connector,
> + bool force)
> +{
> + struct anx78xx *anx78xx = container_of(connector, struct anx78xx,
> + connector);
> +
> + DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id,
> + connector->name);
> +
> + if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd)) {
> + DRM_DEBUG_KMS("CONNECTOR STATUS DISCONNECTED\n");
> + return connector_status_disconnected;
> + }
> +
> + return connector_status_connected;
> +}
> +
> +static void anx78xx_connector_destroy(struct drm_connector *connector)
> +{
> + drm_connector_cleanup(connector);
> +}
> +
> +static const struct drm_connector_funcs anx78xx_connector_funcs = {
> + .dpms = drm_atomic_helper_connector_dpms,
> + .fill_modes = drm_helper_probe_single_connector_modes,
> + .detect = anx78xx_detect,
> + .destroy = anx78xx_connector_destroy,
> + .reset = drm_atomic_helper_connector_reset,
> + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> +};
> +
> +static inline struct anx78xx *bridge_to_anx78xx(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct anx78xx, bridge);
> +}
> +
> +static int anx78xx_bridge_attach(struct drm_bridge *bridge)
> +{
> + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
> + int err;
> +
> + if (!bridge->encoder) {
> + DRM_ERROR("Parent encoder object not found");
> + return -ENODEV;
> + }
> +
> + /* Register aux channel */
> + anx78xx->aux.name = "DP-AUX";
> + anx78xx->aux.dev = &anx78xx->client->dev;
> + anx78xx->aux.transfer = anx78xx_aux_transfer;
> +
> + err = drm_dp_aux_register(&anx78xx->aux);
> + if (err < 0) {
> + DRM_ERROR("Failed to register aux channel: %d\n", err);
> + return err;
> + }
> +
> + err = drm_connector_init(bridge->dev, &anx78xx->connector,
> + &anx78xx_connector_funcs,
> + DRM_MODE_CONNECTOR_DisplayPort);
> + if (err) {
> + DRM_ERROR("Failed to initialize connector: %d\n", err);
> + return err;
> + }
> +
> + drm_connector_helper_add(&anx78xx->connector,
> + &anx78xx_connector_helper_funcs);
> +
> + err = drm_connector_register(&anx78xx->connector);
> + if (err) {
> + DRM_ERROR("Failed to register connector: %d\n", err);
> + return err;
> + }
> +
> + anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +
> + err = drm_mode_connector_attach_encoder(&anx78xx->connector,
> + bridge->encoder);
> + if (err) {
> + DRM_ERROR("Failed to link up connector to encoder: %d\n", err);
> + return err;
> + }
> +
> + return 0;
> +}
> +
> +static bool anx78xx_bridge_mode_fixup(struct drm_bridge *bridge,
> + const struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + if (mode->flags & DRM_MODE_FLAG_INTERLACE)
> + return false;
> +
> + /* Max 1200p at 5.4 Ghz, one lane */
> + if (mode->clock > 154000)
> + return false;
This can be in a follow up patch, but we need to restrict resolutions according
to the current bandwidth (e.g. 720p at 2.7Ghz).
> +
> + return true;
> +}
> +
> +static void anx78xx_bridge_disable(struct drm_bridge *bridge) {
> + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
> +
> + mutex_lock(&anx78xx->lock);
> +
> + /* Power off all modules except configuration registers access */
> + anx78xx_set_bits(anx78xx->map[I2C_IDX_TX_P2], SP_POWERDOWN_CTRL_REG,
> + SP_HDCP_PD | SP_AUDIO_PD | SP_VIDEO_PD | SP_LINK_PD);
> +
> + mutex_unlock(&anx78xx->lock);
> +}
> +
> +static void anx78xx_bridge_mode_set(struct drm_bridge *bridge,
> + struct drm_display_mode *mode,
> + struct drm_display_mode *adjusted_mode)
> +{
> + int err;
> + struct hdmi_avi_infoframe frame;
> + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
> +
> + if (WARN_ON(!anx78xx->powered))
> + return;
> +
> + mutex_lock(&anx78xx->lock);
> +
> + mode = adjusted_mode;
> +
> + err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
> + if (err) {
> + DRM_ERROR("Failed to setup AVI infoframe: %d\n", err);
> + goto unlock;
> + }
> +
> + err = anx78xx_send_video_infoframe(anx78xx, &frame);
> + if (err)
> + DRM_ERROR("Failed to send AVI infoframe: %d\n", err);
> +
> +unlock:
> + mutex_unlock(&anx78xx->lock);
> +}
> +
> +static void anx78xx_bridge_enable(struct drm_bridge *bridge) {
> + int err;
> + struct anx78xx *anx78xx = bridge_to_anx78xx(bridge);
> +
> + mutex_lock(&anx78xx->lock);
> +
> + err = anx78xx_start(anx78xx);
> + if (err)
> + DRM_ERROR("Failed to initialize: %d\n", err);
> +
> + err = anx78xx_set_hpd(anx78xx);
> + if (err)
> + DRM_ERROR("Failed to set HPD: %d\n", err);
> +
> + mutex_unlock(&anx78xx->lock);
> +}
> +
> +static const struct drm_bridge_funcs anx78xx_bridge_funcs = {
> + .attach = anx78xx_bridge_attach,
> + .mode_fixup = anx78xx_bridge_mode_fixup,
> + .disable = anx78xx_bridge_disable,
> + .mode_set = anx78xx_bridge_mode_set,
> + .enable = anx78xx_bridge_enable,
> +};
> +
> +static irqreturn_t anx78xx_hpd_threaded_handler(int unused, void *data)
> +{
> + int err;
> + struct anx78xx *anx78xx = data;
> +
> + if (anx78xx->powered)
> + return IRQ_HANDLED;
> +
> + mutex_lock(&anx78xx->lock);
> +
> + /* Cable is pulled, power on the chip */
> + anx78xx_poweron(anx78xx);
> +
> + err = anx78xx_enable_interrupts(anx78xx);
> + if (err)
> + DRM_ERROR("Failed to enable interrupts: %d\n", err);
> +
> + mutex_unlock(&anx78xx->lock);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int anx78xx_handle_dp_int_1(struct anx78xx *anx78xx, u8 irq)
> +{
> + int err;
> +
> + DRM_DEBUG_KMS("Handle DP interrupt 1: %02x\n", irq);
> +
> + err = regmap_write(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
> + irq);
> + if (err)
> + return err;
> +
> + if (irq & SP_TRAINING_FINISH) {
> + DRM_DEBUG_KMS("IRQ: hardware link training finished\n");
> + err = anx78xx_config_dp_output(anx78xx);
> + }
> +
> + return err;
> +}
> +
> +static bool anx78xx_handle_common_int_4(struct anx78xx *anx78xx, u8 irq)
> +{
> + int err;
> + bool event = false;
> +
> + DRM_DEBUG_KMS("Handle common interrupt 4: %02x\n", irq);
> +
> + err = regmap_write(anx78xx->map[I2C_IDX_TX_P2],
> + SP_COMMON_INT_STATUS4_REG, irq);
> + if (err) {
> + DRM_ERROR("Failed to write SP_COMMON_INT_STATUS4 %d\n", err);
> + return event;
> + }
> +
> + if (irq & SP_HPD_LOST) {
> + DRM_DEBUG_KMS("IRQ: Hot plug detect - cable is pulled out\n");
> + event = true;
> + anx78xx_poweroff(anx78xx);
> + } else if (irq & SP_HPD_PLUG) {
> + DRM_DEBUG_KMS("IRQ: Hot plug detect - cable plug\n");
> + event = true;
> + /* Free previous cached EDID if any */
> + kfree(anx78xx->edid);
> + anx78xx->edid = NULL;
> + }
> +
> + return event;
> +}
> +
> +static void anx78xx_handle_hdmi_int_1(struct anx78xx *anx78xx, u8 irq)
> +{
> + int err;
> + unsigned int regval;
> +
> + DRM_DEBUG_KMS("Handle HDMI interrupt 1: %02x\n", irq);
> +
> + err = regmap_write(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
> + irq);
> + if (err) {
> + DRM_ERROR("Write hdmi int 1 failed %d\n", err);
> + return;
> + }
> +
> + if ((irq & SP_CKDT_CHG) || (irq & SP_SCDT_CHG)) {
> + DRM_DEBUG_KMS("IRQ: HDMI input detected\n");
> + err = regmap_read(anx78xx->map[I2C_IDX_RX_P0],
> + SP_SYSTEM_STATUS_REG, ®val);
> + if (err) {
> + DRM_ERROR("Read system status reg failed %d\n", err);
> + return;
> + }
> +
> + if (!(regval & SP_TMDS_CLOCK_DET)) {
> + DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI clock ***\n");
> + return;
> + }
> + if (!(regval & SP_TMDS_DE_DET)) {
> + DRM_DEBUG_KMS("IRQ: *** Waiting for HDMI signal ***\n");
> + return;
> + }
> +
> + err = anx78xx_dp_link_training(anx78xx);
> + if (err)
> + DRM_ERROR("Failed to start link training: %d\n", err);
> + }
> +}
> +
> +static irqreturn_t anx78xx_intp_threaded_handler(int unused, void *data)
> +{
> + struct anx78xx *anx78xx = data;
> + int err;
> + unsigned int irq;
> + bool event = false;
> +
> + mutex_lock(&anx78xx->lock);
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DP_INT_STATUS1_REG,
> + &irq);
> + if (err) {
> + DRM_ERROR("Failed to read dp int 1 status %d\n", err);
> + goto unlock;
> + } else if (irq) {
> + anx78xx_handle_dp_int_1(anx78xx, irq);
> + }
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2],
> + SP_COMMON_INT_STATUS4_REG, &irq);
> + if (err) {
> + DRM_ERROR("Failed to read common int 4 status %d\n", err);
> + goto unlock;
> + } else if (irq) {
> + event = anx78xx_handle_common_int_4(anx78xx, irq);
> + }
> +
> + /* Make sure we are still powered after handle HPD events */
> + if (!anx78xx->powered)
> + goto unlock;
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_RX_P0], SP_INT_STATUS1_REG,
> + &irq);
> + if (err)
> + DRM_ERROR("Failed to read hdmi int 1 status %d\n", err);
> + else if (irq)
> + anx78xx_handle_hdmi_int_1(anx78xx, irq);
> +
> +unlock:
> + mutex_unlock(&anx78xx->lock);
> +
> + if (event)
> + drm_helper_hpd_irq_event(anx78xx->connector.dev);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void unregister_i2c_dummy_clients(struct anx78xx *anx78xx)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(anx78xx->i2c_dummy); i++)
> + if (anx78xx->i2c_dummy[i])
> + i2c_unregister_device(anx78xx->i2c_dummy[i]);
> +}
> +
> +static const struct regmap_config anx78xx_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> +static const u16 anx78xx_chipid_list[] = {
> + 0x7812,
> + 0x7814,
> + 0x7818,
> +};
> +
> +static int anx78xx_i2c_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct anx78xx *anx78xx;
> + struct anx78xx_platform_data *pdata;
> + int err, i;
> + unsigned int idl, idh, version;
> + bool found = false;
> +
> + anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL);
> + if (!anx78xx)
> + return -ENOMEM;
> +
> + pdata = &anx78xx->pdata;
> +
> + mutex_init(&anx78xx->lock);
> +
> +#if IS_ENABLED(CONFIG_OF)
> + anx78xx->bridge.of_node = client->dev.of_node;
> +#endif
> +
> + anx78xx->client = client;
> + i2c_set_clientdata(client, anx78xx);
> +
> + err = anx78xx_init_gpio(anx78xx);
> + if (err) {
> + DRM_ERROR("Failed to initialize gpios\n");
> + return err;
> + }
> +
> + pdata->hpd_irq = gpiod_to_irq(pdata->gpiod_hpd);
> + if (pdata->hpd_irq < 0) {
> + DRM_ERROR("Failed to get hpd irq %d\n",
> + pdata->hpd_irq);
> + return -ENODEV;
> + }
> +
> + pdata->intp_irq = client->irq;
> + if (!pdata->intp_irq) {
> + DRM_ERROR("Failed to get CABLE_DET and INTP irq\n");
> + return -ENODEV;
> + }
> +
> + /* Map slave addresses of ANX7814 */
> + for (i = 0; i < I2C_NUM_ADDRESSES; i++) {
> + anx78xx->i2c_dummy[i] = i2c_new_dummy(client->adapter,
> + anx78xx_i2c_addresses[i] >> 1);
> + if (!anx78xx->i2c_dummy[i]) {
> + err = -ENOMEM;
> + DRM_ERROR("Failed to reserve i2c bus %02x.\n",
> + anx78xx_i2c_addresses[i]);
> + goto err_unregister_i2c;
> + }
> +
> + anx78xx->map[i] = devm_regmap_init_i2c(anx78xx->i2c_dummy[i],
> + &anx78xx_regmap_config);
> + if (IS_ERR(anx78xx->map[i])) {
> + err = PTR_ERR(anx78xx->map[i]);
> + DRM_ERROR("Failed regmap initialization %02x.\n",
> + anx78xx_i2c_addresses[i]);
> + goto err_unregister_i2c;
> + }
> + }
> +
> + /* Look for supported chip id */
> + anx78xx_poweron(anx78xx);
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDL_REG,
> + &idl);
> + if (err)
> + goto err_poweroff;
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_IDH_REG,
> + &idh);
> + if (err)
> + goto err_poweroff;
> +
> + anx78xx->chipid = (u8)idl | ((u8)idh << 8);
> +
> + err = regmap_read(anx78xx->map[I2C_IDX_TX_P2], SP_DEVICE_VERSION_REG,
> + &version);
> + if (err)
> + goto err_poweroff;
> +
> + for (i = 0; i < ARRAY_SIZE(anx78xx_chipid_list); i++) {
> + if (anx78xx->chipid == anx78xx_chipid_list[i]) {
> + DRM_INFO("Found ANX%x (ver. %d) SlimPort Transmitter\n",
> + anx78xx->chipid, version);
> + found = true;
> + break;
> + }
> + }
> +
> + if (!found) {
> + DRM_ERROR("ANX%x (ver. %d) not supported by this driver\n",
> + anx78xx->chipid, version);
> + err = -ENODEV;
> + goto err_poweroff;
> + }
> +
> + err = devm_request_threaded_irq(&client->dev, pdata->hpd_irq,
> + NULL,
> + anx78xx_hpd_threaded_handler,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "anx78xx-hpd", anx78xx);
> + if (err) {
> + DRM_ERROR("Failed to request CABLE_DET threaded irq\n");
> + goto err_poweroff;
> + }
> +
> + err = devm_request_threaded_irq(&client->dev, pdata->intp_irq, NULL,
> + anx78xx_intp_threaded_handler,
> + IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> + "anx78xx-intp", anx78xx);
> + if (err) {
> + DRM_ERROR("Failed to request INTP threaded irq\n");
> + goto err_poweroff;
> + }
> +
> + anx78xx->bridge.funcs = &anx78xx_bridge_funcs;
> + err = drm_bridge_add(&anx78xx->bridge);
> + if (err < 0) {
> + DRM_ERROR("Failed to add drm bridge\n");
> + goto err_poweroff;
> + }
> +
> + /* If cable is pulled out, just poweroff and wait for hpd event */
> + if (!gpiod_get_value(anx78xx->pdata.gpiod_hpd))
> + anx78xx_poweroff(anx78xx);
> +
> + return 0;
> +
> +err_poweroff:
> + anx78xx_poweroff(anx78xx);
> +
> +err_unregister_i2c:
> + unregister_i2c_dummy_clients(anx78xx);
> + return err;
> +}
> +
> +static int anx78xx_i2c_remove(struct i2c_client *client)
> +{
> + struct anx78xx *anx78xx = i2c_get_clientdata(client);
> +
> + drm_bridge_remove(&anx78xx->bridge);
> +
> + unregister_i2c_dummy_clients(anx78xx);
> +
> + kfree(anx78xx->edid);
> + anx78xx->edid = NULL;
> +
> + return 0;
> +}
> +
> +static const struct i2c_device_id anx78xx_id[] = {
> + {"anx7814", 0},
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, anx78xx_id);
> +
> +#if IS_ENABLED(CONFIG_OF)
> +static const struct of_device_id anx78xx_match_table[] = {
> + {.compatible = "analogix,anx7814",},
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, anx78xx_match_table);
> +#endif
> +
> +static struct i2c_driver anx78xx_driver = {
> + .driver = {
> + .name = "anx7814",
> + .of_match_table = of_match_ptr(anx78xx_match_table),
> + },
> + .probe = anx78xx_i2c_probe,
> + .remove = anx78xx_i2c_remove,
> + .id_table = anx78xx_id,
> +};
> +
> +module_i2c_driver(anx78xx_driver);
> +
> +MODULE_DESCRIPTION("ANX78xx SlimPort Transmitter driver");
> +MODULE_AUTHOR("Enric Balletbo i Serra <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/gpu/drm/bridge/anx78xx.h b/drivers/gpu/drm/bridge/anx78xx.h
> new file mode 100644
> index 0000000..38753c8
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/anx78xx.h
> @@ -0,0 +1,719 @@
> +/*
> + * Copyright(c) 2016, Analogix Semiconductor. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __ANX78xx_H
> +#define __ANX78xx_H
> +
> +#define TX_P0 0x70
> +#define TX_P1 0x7a
> +#define TX_P2 0x72
> +
> +#define RX_P0 0x7e
> +#define RX_P1 0x80
> +
> +/***************************************************************/
> +/* Register definition of device address 0x7e */
> +/***************************************************************/
> +
> +/*
> + * System Control and Status
> + */
> +
> +/* Software Reset Register 1 */
> +#define SP_SOFTWARE_RESET1_REG 0x11
> +#define SP_VIDEO_RST BIT(4)
> +#define SP_HDCP_MAN_RST BIT(2)
> +#define SP_TMDS_RST BIT(1)
> +#define SP_SW_MAN_RST BIT(0)
> +
> +/* System Status Register */
> +#define SP_SYSTEM_STATUS_REG 0x14
> +#define SP_TMDS_CLOCK_DET BIT(1)
> +#define SP_TMDS_DE_DET BIT(0)
> +
> +/* HDMI Status Register */
> +#define SP_HDMI_STATUS_REG 0x15
> +#define SP_HDMI_AUD_LAYOUT BIT(3)
> +#define SP_HDMI_DET BIT(0)
> +# define SP_DVI_MODE 0
> +# define SP_HDMI_MODE 1
> +
> +/* HDMI Mute Control Register */
> +#define SP_HDMI_MUTE_CTRL_REG 0x16
> +#define SP_AUD_MUTE BIT(1)
> +#define SP_VID_MUTE BIT(0)
> +
> +/* System Power Down Register 1 */
> +#define SP_SYSTEM_POWER_DOWN1_REG 0x18
> +#define SP_PWDN_CTRL BIT(0)
> +
> +/*
> + * Audio and Video Auto Control
> + */
> +
> +/* Auto Audio and Video Control register */
> +#define SP_AUDVID_CTRL_REG 0x20
> +#define SP_AVC_OE BIT(7)
> +#define SP_AAC_OE BIT(6)
> +#define SP_AVC_EN BIT(1)
> +#define SP_AAC_EN BIT(0)
> +
> +/* Audio Exception Enable Registers */
> +#define SP_AUD_EXCEPTION_ENABLE_BASE (0x24 - 1)
> +/* Bits for Audio Exception Enable Register 3 */
> +#define SP_AEC_EN21 BIT(5)
> +
> +/*
> + * Interrupt
> + */
> +
> +/* Interrupt Status Register 1 */
> +#define SP_INT_STATUS1_REG 0x31
> +/* Bits for Interrupt Status Register 1 */
> +#define SP_HDMI_DVI BIT(7)
> +#define SP_CKDT_CHG BIT(6)
> +#define SP_SCDT_CHG BIT(5)
> +#define SP_PCLK_CHG BIT(4)
> +#define SP_PLL_UNLOCK BIT(3)
> +#define SP_CABLE_PLUG_CHG BIT(2)
> +#define SP_SET_MUTE BIT(1)
> +#define SP_SW_INTR BIT(0)
> +/* Bits for Interrupt Status Register 2 */
> +#define SP_HDCP_ERR BIT(5)
> +#define SP_AUDIO_SAMPLE_CHG BIT(0) /* undocumented */
> +/* Bits for Interrupt Status Register 3 */
> +#define SP_AUD_MODE_CHG BIT(0)
> +/* Bits for Interrupt Status Register 5 */
> +#define SP_AUDIO_RCV BIT(0)
> +/* Bits for Interrupt Status Register 6 */
> +#define SP_INT_STATUS6_REG 0x36
> +#define SP_CTS_RCV BIT(7)
> +#define SP_NEW_AUD_PKT BIT(4)
> +#define SP_NEW_AVI_PKT BIT(1)
> +#define SP_NEW_CP_PKT BIT(0)
> +/* Bits for Interrupt Status Register 7 */
> +#define SP_NO_VSI BIT(7)
> +#define SP_NEW_VS BIT(4)
> +
> +/* Interrupt Mask 1 Status Registers */
> +#define SP_INT_MASK1_REG 0x41
> +
> +/* HDMI US TIMER Control Register */
> +#define SP_HDMI_US_TIMER_CTRL_REG 0x49
> +#define SP_MS_TIMER_MARGIN_10_8_MASK 0x07
> +
> +/*
> + * TMDS Control
> + */
> +
> +/* TMDS Control Registers */
> +#define SP_TMDS_CTRL_BASE (0x50 - 1)
> +/* Bits for TMDS Control Register 7 */
> +#define SP_PD_RT BIT(0)
> +
> +/*
> + * Video Control
> + */
> +
> +/* Video Status Register */
> +#define SP_VIDEO_STATUS_REG 0x70
> +#define SP_COLOR_DEPTH_MASK 0xf0
> +#define SP_COLOR_DEPTH_SHIFT 4
> +# define SP_COLOR_DEPTH_MODE_LEGACY 0x00
> +# define SP_COLOR_DEPTH_MODE_24BIT 0x04
> +# define SP_COLOR_DEPTH_MODE_30BIT 0x05
> +# define SP_COLOR_DEPTH_MODE_36BIT 0x06
> +# define SP_COLOR_DEPTH_MODE_48BIT 0x07
> +
> +/* Video Data Range Control Register */
> +#define SP_VID_DATA_RANGE_CTRL_REG 0x83
> +#define SP_R2Y_INPUT_LIMIT BIT(1)
> +
> +/* Pixel Clock High Resolution Counter Registers */
> +#define SP_PCLK_HIGHRES_CNT_BASE (0x8c - 1)
> +
> +/*
> + * Audio Control
> + */
> +
> +/* Number of Audio Channels Status Registers */
> +#define SP_AUD_CH_STATUS_REG_NUM 6
> +
> +/* Audio IN S/PDIF Channel Status Registers */
> +#define SP_AUD_SPDIF_CH_STATUS_BASE 0xc7
> +
> +/* Audio IN S/PDIF Channel Status Register 4 */
> +#define SP_FS_FREQ_MASK 0x0f
> +# define SP_FS_FREQ_44100HZ 0x00
> +# define SP_FS_FREQ_48000HZ 0x02
> +# define SP_FS_FREQ_32000HZ 0x03
> +# define SP_FS_FREQ_88200HZ 0x08
> +# define SP_FS_FREQ_96000HZ 0x0a
> +# define SP_FS_FREQ_176400HZ 0x0c
> +# define SP_FS_FREQ_192000HZ 0x0e
> +
> +/*
> + * Micellaneous Control Block
> + */
> +
> +/* CHIP Control Register */
> +#define SP_CHIP_CTRL_REG 0xe3
> +#define SP_MAN_HDMI5V_DET BIT(3)
> +#define SP_PLLLOCK_CKDT_EN BIT(2)
> +#define SP_ANALOG_CKDT_EN BIT(1)
> +#define SP_DIGITAL_CKDT_EN BIT(0)
> +
> +/* Packet Receiving Status Register */
> +#define SP_PACKET_RECEIVING_STATUS_REG 0xf3
> +#define SP_AVI_RCVD BIT(5)
> +#define SP_VSI_RCVD BIT(1)
> +
> +/***************************************************************/
> +/* Register definition of device address 0x80 */
> +/***************************************************************/
> +
> +/* HDCP BCAPS Shadow Register */
> +#define SP_HDCP_BCAPS_SHADOW_REG 0x2a
> +#define SP_BCAPS_REPEATER BIT(5)
> +
> +/* HDCP Status Register */
> +#define SP_RX_HDCP_STATUS_REG 0x3f
> +#define SP_AUTH_EN BIT(4)
> +
> +/*
> + * InfoFrame and Control Packet Registers
> + */
> +
> +/* AVI InfoFrame packet checksum */
> +#define SP_AVI_INFOFRAME_CHECKSUM 0xa3
> +
> +/* AVI InfoFrame Registers */
> +#define SP_AVI_INFOFRAME_DATA_BASE 0xa4
> +
> +#define SP_AVI_COLOR_F_MASK 0x60
> +#define SP_AVI_COLOR_F_SHIFT 5
> +
> +/* Audio InfoFrame Registers */
> +#define SP_AUD_INFOFRAME_DATA_BASE 0xc4
> +#define SP_AUD_INFOFRAME_LAYOUT_MASK 0x0f
> +
> +/* MPEG/HDMI Vendor Specific InfoFrame Packet type code */
> +#define SP_MPEG_VS_INFOFRAME_TYPE_REG 0xe0
> +
> +/* MPEG/HDMI Vendor Specific InfoFrame Packet length */
> +#define SP_MPEG_VS_INFOFRAME_LEN_REG 0xe2
> +
> +/* MPEG/HDMI Vendor Specific InfoFrame Packet version number */
> +#define SP_MPEG_VS_INFOFRAME_VER_REG 0xe1
> +
> +/* MPEG/HDMI Vendor Specific InfoFrame Packet content */
> +#define SP_MPEG_VS_INFOFRAME_DATA_BASE 0xe4
> +
> +/* General Control Packet Register */
> +#define SP_GENERAL_CTRL_PACKET_REG 0x9f
> +#define SP_CLEAR_AVMUTE BIT(4)
> +#define SP_SET_AVMUTE BIT(0)
> +
> +/***************************************************************/
> +/* Register definition of device address 0x70 */
> +/***************************************************************/
> +
> +/* HDCP Status Register */
> +#define SP_TX_HDCP_STATUS_REG 0x00
> +#define SP_AUTH_FAIL BIT(5)
> +#define SP_AUTHEN_PASS BIT(1)
> +
> +/* HDCP Control Register 0 */
> +#define SP_HDCP_CTRL0_REG 0x01
> +#define SP_RX_REPEATER BIT(6)
> +#define SP_RE_AUTH BIT(5)
> +#define SP_SW_AUTH_OK BIT(4)
> +#define SP_HARD_AUTH_EN BIT(3)
> +#define SP_HDCP_ENC_EN BIT(2)
> +#define SP_BKSV_SRM_PASS BIT(1)
> +#define SP_KSVLIST_VLD BIT(0)
> +/* HDCP Function Enabled */
> +#define SP_HDCP_FUNCTION_ENABLED (BIT(0) | BIT(1) | BIT(2) | BIT(3))
> +
> +/* HDCP Receiver BSTATUS Register 0 */
> +#define SP_HDCP_RX_BSTATUS0_REG 0x1b
> +/* HDCP Receiver BSTATUS Register 1 */
> +#define SP_HDCP_RX_BSTATUS1_REG 0x1c
> +
> +/* HDCP Embedded "Blue Screen" Content Registers */
> +#define SP_HDCP_VID0_BLUE_SCREEN_REG 0x2c
> +#define SP_HDCP_VID1_BLUE_SCREEN_REG 0x2d
> +#define SP_HDCP_VID2_BLUE_SCREEN_REG 0x2e
> +
> +/* HDCP Wait R0 Timing Register */
> +#define SP_HDCP_WAIT_R0_TIME_REG 0x40
> +
> +/* HDCP Link Integrity Check Timer Register */
> +#define SP_HDCP_LINK_CHECK_TIMER_REG 0x41
> +
> +/* HDCP Repeater Ready Wait Timer Register */
> +#define SP_HDCP_RPTR_RDY_WAIT_TIME_REG 0x42
> +
> +/* HDCP Auto Timer Register */
> +#define SP_HDCP_AUTO_TIMER_REG 0x51
> +
> +/* HDCP Key Status Register */
> +#define SP_HDCP_KEY_STATUS_REG 0x5e
> +
> +/* HDCP Key Command Register */
> +#define SP_HDCP_KEY_COMMAND_REG 0x5f
> +#define SP_DISABLE_SYNC_HDCP BIT(2)
> +
> +/* OTP Memory Key Protection Registers */
> +#define SP_OTP_KEY_PROTECT1_REG 0x60
> +#define SP_OTP_KEY_PROTECT2_REG 0x61
> +#define SP_OTP_KEY_PROTECT3_REG 0x62
> +#define SP_OTP_PSW1 0xa2
> +#define SP_OTP_PSW2 0x7e
> +#define SP_OTP_PSW3 0xc6
> +
> +/* DP System Control Registers */
> +#define SP_DP_SYSTEM_CTRL_BASE (0x80 - 1)
> +/* Bits for DP System Control Register 2 */
> +#define SP_CHA_STA BIT(2)
> +/* Bits for DP System Control Register 3 */
> +#define SP_HPD_STATUS BIT(6)
> +#define SP_STRM_VALID BIT(2)
> +/* Bits for DP System Control Register 4 */
> +#define SP_ENHANCED_MODE BIT(3)
> +
> +/* DP Video Control Register */
> +#define SP_DP_VIDEO_CTRL_REG 0x84
> +#define SP_COLOR_F_MASK 0x06
> +#define SP_COLOR_F_SHIFT 1
> +#define SP_BPC_MASK 0xe0
> +#define SP_BPC_SHIFT 5
> +# define SP_BPC_6BITS 0x00
> +# define SP_BPC_8BITS 0x01
> +# define SP_BPC_10BITS 0x02
> +# define SP_BPC_12BITS 0x03
> +
> +/* DP Audio Control Register */
> +#define SP_DP_AUDIO_CTRL_REG 0x87
> +#define SP_AUD_EN BIT(0)
> +
> +/* 10us Pulse Generate Timer Registers */
> +#define SP_I2C_GEN_10US_TIMER0_REG 0x88
> +#define SP_I2C_GEN_10US_TIMER1_REG 0x89
> +
> +/* Packet Send Control Register */
> +#define SP_PACKET_SEND_CTRL_REG 0x90
> +#define SP_AUD_IF_UP BIT(7)
> +#define SP_AVI_IF_UD BIT(6)
> +#define SP_MPEG_IF_UD BIT(5)
> +#define SP_SPD_IF_UD BIT(4)
> +#define SP_AUD_IF_EN BIT(3)
> +#define SP_AVI_IF_EN BIT(2)
> +#define SP_MPEG_IF_EN BIT(1)
> +#define SP_SPD_IF_EN BIT(0)
> +
> +/* DP HDCP Control Register */
> +#define SP_DP_HDCP_CTRL_REG 0x92
> +#define SP_AUTO_EN BIT(7)
> +#define SP_AUTO_START BIT(5)
> +#define SP_LINK_POLLING BIT(1)
> +
> +/* DP Main Link Bandwidth Setting Register */
> +#define SP_DP_MAIN_LINK_BW_SET_REG 0xa0
> +#define SP_LINK_BW_SET_MASK 0x1f
> +#define SP_INITIAL_SLIM_M_AUD_SEL BIT(5)
> +
> +/* DP Training Pattern Set Register */
> +#define SP_DP_TRAINING_PATTERN_SET_REG 0xa2
> +
> +/* DP Lane 0 Link Training Control Register */
> +#define SP_DP_LANE0_LT_CTRL_REG 0xa3
> +#define SP_TX_SW_SET_MASK 0x1b
> +#define SP_MAX_PRE_REACH BIT(5)
> +#define SP_MAX_DRIVE_REACH BIT(4)
> +#define SP_PRE_EMP_LEVEL1 BIT(3)
> +#define SP_DRVIE_CURRENT_LEVEL1 BIT(0)
> +
> +/* DP Link Training Control Register */
> +#define SP_DP_LT_CTRL_REG 0xa8
> +#define SP_LT_ERROR_TYPE_MASK 0x70
> +# define SP_LT_NO_ERROR 0x00
> +# define SP_LT_AUX_WRITE_ERROR 0x01
> +# define SP_LT_MAX_DRIVE_REACHED 0x02
> +# define SP_LT_WRONG_LANE_COUNT_SET 0x03
> +# define SP_LT_LOOP_SAME_5_TIME 0x04
> +# define SP_LT_CR_FAIL_IN_EQ 0x05
> +# define SP_LT_EQ_LOOP_5_TIME 0x06
> +#define SP_LT_EN BIT(0)
> +
> +/* DP CEP Training Control Registers */
> +#define SP_DP_CEP_TRAINING_CTRL0_REG 0xa9
> +#define SP_DP_CEP_TRAINING_CTRL1_REG 0xaa
> +
> +/* DP Debug Register 1 */
> +#define SP_DP_DEBUG1_REG 0xb0
> +#define SP_DEBUG_PLL_LOCK BIT(4)
> +#define SP_POLLING_EN BIT(1)
> +
> +/* DP Polling Control Register */
> +#define SP_DP_POLLING_CTRL_REG 0xb4
> +#define SP_AUTO_POLLING_DISABLE BIT(0)
> +
> +/* DP Link Debug Control Register */
> +#define SP_DP_LINK_DEBUG_CTRL_REG 0xb8
> +#define SP_M_VID_DEBUG BIT(5)
> +#define SP_NEW_PRBS7 BIT(4)
> +#define SP_INSERT_ER BIT(1)
> +#define SP_PRBS31_EN BIT(0)
> +
> +/* AUX Misc control Register */
> +#define SP_AUX_MISC_CTRL_REG 0xbf
> +
> +/* DP PLL control Register */
> +#define SP_DP_PLL_CTRL_REG 0xc7
> +#define SP_PLL_RST BIT(6)
> +
> +/* DP Analog Power Down Register */
> +#define SP_DP_ANALOG_POWER_DOWN_REG 0xc8
> +#define SP_CH0_PD BIT(0)
> +
> +/* DP Misc Control Register */
> +#define SP_DP_MISC_CTRL_REG 0xcd
> +#define SP_EQ_TRAINING_LOOP BIT(6)
> +
> +/* DP Extra I2C Device Address Register */
> +#define SP_DP_EXTRA_I2C_DEV_ADDR_REG 0xce
> +#define SP_I2C_STRETCH_DISABLE BIT(7)
> +
> +#define SP_I2C_EXTRA_ADDR 0x50
> +
> +/* DP Downspread Control Register 1 */
> +#define SP_DP_DOWNSPREAD_CTRL1_REG 0xd0
> +
> +/* DP M Value Calculation Control Register */
> +#define SP_DP_M_CALCULATION_CTRL_REG 0xd9
> +#define SP_M_GEN_CLK_SEL BIT(0)
> +
> +/* AUX Channel Access Status Register */
> +#define SP_AUX_CH_STATUS_REG 0xe0
> +#define SP_AUX_STATUS 0x0f
> +
> +/* AUX Channel DEFER Control Register */
> +#define SP_AUX_DEFER_CTRL_REG 0xe2
> +#define SP_DEFER_CTRL_EN BIT(7)
> +
> +/* DP Buffer Data Count Register */
> +#define SP_BUF_DATA_COUNT_REG 0xe4
> +#define SP_BUF_DATA_COUNT_MASK 0x1f
> +#define SP_BUF_CLR BIT(7)
> +
> +/* DP AUX Channel Control Register 1 */
> +#define SP_DP_AUX_CH_CTRL1_REG 0xe5
> +#define SP_AUX_TX_COMM_MASK 0x0f
> +#define SP_AUX_LENGTH_MASK 0xf0
> +#define SP_AUX_LENGTH_SHIFT 4
> +
> +/* DP AUX CH Address Register 0 */
> +#define SP_AUX_ADDR_7_0_REG 0xe6
> +
> +/* DP AUX CH Address Register 1 */
> +#define SP_AUX_ADDR_15_8_REG 0xe7
> +
> +/* DP AUX CH Address Register 2 */
> +#define SP_AUX_ADDR_19_16_REG 0xe8
> +#define SP_AUX_ADDR_19_16_MASK 0x0f
> +
> +/* DP AUX Channel Control Register 2 */
> +#define SP_DP_AUX_CH_CTRL2_REG 0xe9
> +#define SP_AUX_SEL_RXCM BIT(6)
> +#define SP_AUX_CHSEL BIT(3)
> +#define SP_AUX_PN_INV BIT(2)
> +#define SP_ADDR_ONLY BIT(1)
> +#define SP_AUX_EN BIT(0)
> +
> +/* DP Video Stream Control InfoFrame Register */
> +#define SP_DP_3D_VSC_CTRL_REG 0xea
> +#define SP_INFO_FRAME_VSC_EN BIT(0)
> +
> +/* DP Video Stream Data Byte 1 Register */
> +#define SP_DP_VSC_DB1_REG 0xeb
> +
> +/* DP AUX Channel Control Register 3 */
> +#define SP_DP_AUX_CH_CTRL3_REG 0xec
> +#define SP_WAIT_COUNTER_7_0_MASK 0xff
> +
> +/* DP AUX Channel Control Register 4 */
> +#define SP_DP_AUX_CH_CTRL4_REG 0xed
> +
> +/* DP AUX Buffer Data Registers */
> +#define SP_DP_BUF_DATA0_REG 0xf0
> +
> +/***************************************************************/
> +/* Register definition of device address 0x72 */
> +/***************************************************************/
> +
> +/*
> + * Core Register Definitions
> + */
> +
> +/* Device ID Low Byte Register */
> +#define SP_DEVICE_IDL_REG 0x02
> +
> +/* Device ID High Byte Register */
> +#define SP_DEVICE_IDH_REG 0x03
> +
> +/* Device version register */
> +#define SP_DEVICE_VERSION_REG 0x04
> +
> +/* Power Down Control Register */
> +#define SP_POWERDOWN_CTRL_REG 0x05
> +#define SP_REGISTER_PD BIT(7)
> +#define SP_HDCP_PD BIT(5)
> +#define SP_AUDIO_PD BIT(4)
> +#define SP_VIDEO_PD BIT(3)
> +#define SP_LINK_PD BIT(2)
> +#define SP_TOTAL_PD BIT(1)
> +
> +/* Reset Control Register 1 */
> +#define SP_RESET_CTRL1_REG 0x06
> +#define SP_MISC_RST BIT(7)
> +#define SP_VIDCAP_RST BIT(6)
> +#define SP_VIDFIF_RST BIT(5)
> +#define SP_AUDFIF_RST BIT(4)
> +#define SP_AUDCAP_RST BIT(3)
> +#define SP_HDCP_RST BIT(2)
> +#define SP_SW_RST BIT(1)
> +#define SP_HW_RST BIT(0)
> +
> +/* Reset Control Register 2 */
> +#define SP_RESET_CTRL2_REG 0x07
> +#define SP_AUX_RST BIT(2)
> +#define SP_SERDES_FIFO_RST BIT(1)
> +#define SP_I2C_REG_RST BIT(0)
> +
> +/* Video Control Register 1 */
> +#define SP_VID_CTRL1_REG 0x08
> +#define SP_VIDEO_EN BIT(7)
> +#define SP_VIDEO_MUTE BIT(2)
> +#define SP_DE_GEN BIT(1)
> +#define SP_DEMUX BIT(0)
> +
> +/* Video Control Register 2 */
> +#define SP_VID_CTRL2_REG 0x09
> +#define SP_IN_COLOR_F_MASK 0x03
> +#define SP_IN_YC_BIT_SEL BIT(2)
> +#define SP_IN_BPC_MASK 0x70
> +#define SP_IN_BPC_SHIFT 4
> +# define SP_IN_BPC_12BIT 0x03
> +# define SP_IN_BPC_10BIT 0x02
> +# define SP_IN_BPC_8BIT 0x01
> +# define SP_IN_BPC_6BIT 0x00
> +#define SP_IN_D_RANGE BIT(7)
> +
> +/* Video Control Register 3 */
> +#define SP_VID_CTRL3_REG 0x0a
> +#define SP_HPD_OUT BIT(6)
> +
> +/* Video Control Register 5 */
> +#define SP_VID_CTRL5_REG 0x0c
> +#define SP_CSC_STD_SEL BIT(7)
> +#define SP_XVYCC_RNG_LMT BIT(6)
> +#define SP_RANGE_Y2R BIT(5)
> +#define SP_CSPACE_Y2R BIT(4)
> +#define SP_RGB_RNG_LMT BIT(3)
> +#define SP_Y_RNG_LMT BIT(2)
> +#define SP_RANGE_R2Y BIT(1)
> +#define SP_CSPACE_R2Y BIT(0)
> +
> +/* Video Control Register 6 */
> +#define SP_VID_CTRL6_REG 0x0d
> +#define SP_TEST_PATTERN_EN BIT(7)
> +#define SP_VIDEO_PROCESS_EN BIT(6)
> +#define SP_VID_US_MODE BIT(3)
> +#define SP_VID_DS_MODE BIT(2)
> +#define SP_UP_SAMPLE BIT(1)
> +#define SP_DOWN_SAMPLE BIT(0)
> +
> +/* Video Control Register 8 */
> +#define SP_VID_CTRL8_REG 0x0f
> +#define SP_VID_VRES_TH BIT(0)
> +
> +/* Total Line Status Low Byte Register */
> +#define SP_TOTAL_LINE_STAL_REG 0x24
> +
> +/* Total Line Status High Byte Register */
> +#define SP_TOTAL_LINE_STAH_REG 0x25
> +
> +/* Active Line Status Low Byte Register */
> +#define SP_ACT_LINE_STAL_REG 0x26
> +
> +/* Active Line Status High Byte Register */
> +#define SP_ACT_LINE_STAH_REG 0x27
> +
> +/* Vertical Front Porch Status Register */
> +#define SP_V_F_PORCH_STA_REG 0x28
> +
> +/* Vertical SYNC Width Status Register */
> +#define SP_V_SYNC_STA_REG 0x29
> +
> +/* Vertical Back Porch Status Register */
> +#define SP_V_B_PORCH_STA_REG 0x2a
> +
> +/* Total Pixel Status Low Byte Register */
> +#define SP_TOTAL_PIXEL_STAL_REG 0x2b
> +
> +/* Total Pixel Status High Byte Register */
> +#define SP_TOTAL_PIXEL_STAH_REG 0x2c
> +
> +/* Active Pixel Status Low Byte Register */
> +#define SP_ACT_PIXEL_STAL_REG 0x2d
> +
> +/* Active Pixel Status High Byte Register */
> +#define SP_ACT_PIXEL_STAH_REG 0x2e
> +
> +/* Horizontal Front Porch Status Low Byte Register */
> +#define SP_H_F_PORCH_STAL_REG 0x2f
> +
> +/* Horizontal Front Porch Statys High Byte Register */
> +#define SP_H_F_PORCH_STAH_REG 0x30
> +
> +/* Horizontal SYNC Width Status Low Byte Register */
> +#define SP_H_SYNC_STAL_REG 0x31
> +
> +/* Horizontal SYNC Width Status High Byte Register */
> +#define SP_H_SYNC_STAH_REG 0x32
> +
> +/* Horizontal Back Porch Status Low Byte Register */
> +#define SP_H_B_PORCH_STAL_REG 0x33
> +
> +/* Horizontal Back Porch Status High Byte Register */
> +#define SP_H_B_PORCH_STAH_REG 0x34
> +
> +/* InfoFrame AVI Packet DB1 Register */
> +#define SP_INFOFRAME_AVI_DB1_REG 0x70
> +
> +/* Bit Control Specific Register */
> +#define SP_BIT_CTRL_SPECIFIC_REG 0x80
> +#define SP_BIT_CTRL_SELECT_SHIFT 1
> +#define SP_ENABLE_BIT_CTRL BIT(0)
> +
> +/* InfoFrame Audio Packet DB1 Register */
> +#define SP_INFOFRAME_AUD_DB1_REG 0x83
> +
> +/* InfoFrame MPEG Packet DB1 Register */
> +#define SP_INFOFRAME_MPEG_DB1_REG 0xb0
> +
> +/* Audio Channel Status Registers */
> +#define SP_AUD_CH_STATUS_BASE 0xd0
> +
> +/* Audio Channel Num Register 5 */
> +#define SP_I2S_CHANNEL_NUM_MASK 0xe0
> +# define SP_I2S_CH_NUM_1 (0x00 << 5)
> +# define SP_I2S_CH_NUM_2 (0x01 << 5)
> +# define SP_I2S_CH_NUM_3 (0x02 << 5)
> +# define SP_I2S_CH_NUM_4 (0x03 << 5)
> +# define SP_I2S_CH_NUM_5 (0x04 << 5)
> +# define SP_I2S_CH_NUM_6 (0x05 << 5)
> +# define SP_I2S_CH_NUM_7 (0x06 << 5)
> +# define SP_I2S_CH_NUM_8 (0x07 << 5)
> +#define SP_EXT_VUCP BIT(2)
> +#define SP_VBIT BIT(1)
> +#define SP_AUDIO_LAYOUT BIT(0)
> +
> +/* Analog Debug Register 2 */
> +#define SP_ANALOG_DEBUG2_REG 0xdd
> +#define SP_FORCE_SW_OFF_BYPASS 0x20
> +#define SP_XTAL_FRQ 0x1c
> +# define SP_XTAL_FRQ_19M2 (0x00 << 2)
> +# define SP_XTAL_FRQ_24M (0x01 << 2)
> +# define SP_XTAL_FRQ_25M (0x02 << 2)
> +# define SP_XTAL_FRQ_26M (0x03 << 2)
> +# define SP_XTAL_FRQ_27M (0x04 << 2)
> +# define SP_XTAL_FRQ_38M4 (0x05 << 2)
> +# define SP_XTAL_FRQ_52M (0x06 << 2)
> +#define SP_POWERON_TIME_1P5MS 0x03
> +
> +/* Analog Control 0 Register */
> +#define SP_ANALOG_CTRL0_REG 0xe1
> +
> +/* Common Interrupt Status Register 1 */
> +#define SP_COMMON_INT_STATUS_BASE (0xf1 - 1)
> +#define SP_PLL_LOCK_CHG 0x40
> +
> +/* Common Interrupt Status Register 2 */
> +#define SP_COMMON_INT_STATUS2 0xf2
> +#define SP_HDCP_AUTH_CHG BIT(1)
> +#define SP_HDCP_AUTH_DONE BIT(0)
> +
> +#define SP_HDCP_LINK_CHECK_FAIL BIT(0)
> +
> +/* Common Interrupt Status Register 4 */
> +#define SP_COMMON_INT_STATUS4_REG 0xf4
> +#define SP_HPD_IRQ BIT(6)
> +#define SP_HPD_ESYNC_ERR BIT(4)
> +#define SP_HPD_CHG BIT(2)
> +#define SP_HPD_LOST BIT(1)
> +#define SP_HPD_PLUG BIT(0)
> +
> +/* DP Interrupt Status Register */
> +#define SP_DP_INT_STATUS1_REG 0xf7
> +#define SP_TRAINING_FINISH BIT(5)
> +#define SP_POLLING_ERR BIT(4)
> +
> +/* Common Interrupt Mask Register */
> +#define SP_COMMON_INT_MASK_BASE (0xf8 - 1)
> +
> +#define SP_COMMON_INT_MASK4_REG 0xfb
> +
> +/* DP Interrupts Mask Register */
> +#define SP_DP_INT_MASK1_REG 0xfe
> +
> +/* Interrupt Control Register */
> +#define SP_INT_CTRL_REG 0xff
> +
> +/***************************************************************/
> +/* Register definition of device address 0x7a */
> +/***************************************************************/
> +
> +/* DP TX Link Training Control Register */
> +#define SP_DP_TX_LT_CTRL0_REG 0x30
> +
> +/* PD 1.2 Lint Training 80bit Pattern Register */
> +#define SP_DP_LT_80BIT_PATTERN0_REG 0x80
> +#define SP_DP_LT_80BIT_PATTERN_REG_NUM 10
> +
> +/* Audio Interface Control Register 0 */
> +#define SP_AUD_INTERFACE_CTRL0_REG 0x5f
> +#define SP_AUD_INTERFACE_DISABLE 0x80
> +
> +/* Audio Interface Control Register 2 */
> +#define SP_AUD_INTERFACE_CTRL2_REG 0x60
> +#define SP_M_AUD_ADJUST_ST 0x04
> +
> +/* Audio Interface Control Register 3 */
> +#define SP_AUD_INTERFACE_CTRL3_REG 0x62
> +
> +/* Audio Interface Control Register 4 */
> +#define SP_AUD_INTERFACE_CTRL4_REG 0x67
> +
> +/* Audio Interface Control Register 5 */
> +#define SP_AUD_INTERFACE_CTRL5_REG 0x68
> +
> +/* Audio Interface Control Register 6 */
> +#define SP_AUD_INTERFACE_CTRL6_REG 0x69
> +
> +/* Firmware Version Register */
> +#define SP_FW_VER_REG 0xb7
> +
> +#endif
> --
> 2.1.0
>