ldo7_reg should not work as regulator since it is set to 'disabled' state
in the omap5-board-common.dtsi and the state is not changed to 'okay'
this means that the ldo7_reg is not available to be used in the igep0050
DTS file.
ldo4_reg is used by all other OMAP5 boards and this is most likely the
correct regulator to use with hdmi.
The hdmi needs 1.8V, but the ldo7_reg, based on the dtsi is 2V only.
Signed-off-by: Peter Ujfalusi <[email protected]>
---
Tony,
I don't have access to the schematics, but I believe tha the ldo7_reg is not the
correct regulator to be used for hdmi.
If you have access and it is really ldo7_reg, then we should have this in the
omap5-igep0050.dts file:
&ldo5_reg {
status = "okay";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
Regards,
Peter
arch/arm/boot/dts/omap5-igep0050.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 46ecb1dd3b5c..6c8d40327c68 100644
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -20,7 +20,7 @@
};
&hdmi {
- vdda-supply = <&ldo7_reg>;
+ vdda-supply = <&ldo4_reg>;
};
&i2c4 {
--
2.8.1
On 04/29/16 13:21, Peter Ujfalusi wrote:
> ldo7_reg should not work as regulator since it is set to 'disabled' state
> in the omap5-board-common.dtsi and the state is not changed to 'okay'
> this means that the ldo7_reg is not available to be used in the igep0050
> DTS file.
> ldo4_reg is used by all other OMAP5 boards and this is most likely the
> correct regulator to use with hdmi.
> The hdmi needs 1.8V, but the ldo7_reg, based on the dtsi is 2V only.
>
> Signed-off-by: Peter Ujfalusi <[email protected]>
> ---
> Tony,
>
> I don't have access to the schematics, but I believe tha the ldo7_reg is not the
> correct regulator to be used for hdmi.
>
> If you have access and it is really ldo7_reg, then we should have this in the
> omap5-igep0050.dts file:
>
> &ldo5_reg {
ldo7_reg, obviously ;)
> status = "okay";
> regulator-min-microvolt = <1800000>;
> regulator-max-microvolt = <1800000>;
> };
>
> Regards,
> Peter
>
> arch/arm/boot/dts/omap5-igep0050.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
> index 46ecb1dd3b5c..6c8d40327c68 100644
> --- a/arch/arm/boot/dts/omap5-igep0050.dts
> +++ b/arch/arm/boot/dts/omap5-igep0050.dts
> @@ -20,7 +20,7 @@
> };
>
> &hdmi {
> - vdda-supply = <&ldo7_reg>;
> + vdda-supply = <&ldo4_reg>;
> };
>
> &i2c4 {
>
--
P?ter