Use standard probe_irq_on() and probe_irq_off() functions instead of own
implementation.
This prevents warning messages like this in the kernel log:
genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080 (i8042)
Move the IRQ trigger code to a separate function so it can be used for
other purposes (testing if the IRQ works).
Also add missing IRQ reset after probe.
Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/scsi/NCR5380.c | 72 +++++++++++++++++-----------------------------
drivers/scsi/NCR5380.h | 3 +-
drivers/scsi/g_NCR5380.c | 2 +-
3 files changed, 29 insertions(+), 48 deletions(-)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index d849ffa..01c0027 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -351,50 +351,13 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
}
#endif
-
-static int probe_irq;
-
-/**
- * probe_intr - helper for IRQ autoprobe
- * @irq: interrupt number
- * @dev_id: unused
- * @regs: unused
- *
- * Set a flag to indicate the IRQ in question was received. This is
- * used by the IRQ probe code.
- */
-
-static irqreturn_t probe_intr(int irq, void *dev_id)
-{
- probe_irq = irq;
- return IRQ_HANDLED;
-}
-
-/**
- * NCR5380_probe_irq - find the IRQ of an NCR5380
- * @instance: NCR5380 controller
- * @possible: bitmask of ISA IRQ lines
- *
- * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
- * and then looking to see what interrupt actually turned up.
- */
-
-static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
- int possible)
+static void NCR5380_trigger_irq(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
- unsigned long timeout;
- int trying_irqs, i, mask;
-
- for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
- if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
- trying_irqs |= mask;
-
- timeout = jiffies + msecs_to_jiffies(250);
- probe_irq = NO_IRQ;
+ unsigned long timeout = jiffies + msecs_to_jiffies(2500);
/*
- * A interrupt is triggered whenever BSY = false, SEL = true
+ * An interrupt is triggered whenever BSY = false, SEL = true
* and a bit set in the SELECT_ENABLE_REG is asserted on the
* SCSI bus.
*
@@ -402,23 +365,40 @@ static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
* (I/O, C/D, and MSG) match those in the TCR, so we must reset that
* to zero.
*/
-
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
- while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
+ while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) &&
+ time_before(jiffies, timeout))
schedule_timeout_uninterruptible(1);
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+}
- for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
- if (trying_irqs & mask)
- free_irq(i, NULL);
+/**
+ * NCR5380_probe_irq - find the IRQ of an NCR5380
+ * @instance: NCR5380 controller
+ *
+ * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
+ * and then looking to see what interrupt actually turned up.
+ */
+
+static int NCR5380_probe_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ int irqs, irq;
+
+ irqs = probe_irq_on();
+ NCR5380_trigger_irq(instance);
+ irq = probe_irq_off(irqs);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ if (irq < 0)
+ irq = 0;
- return probe_irq;
+ return irq;
}
/**
diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
index 3c6ce54..b2fca52 100644
--- a/drivers/scsi/NCR5380.h
+++ b/drivers/scsi/NCR5380.h
@@ -290,7 +290,8 @@ static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
#define NCR5380_dprint_phase(flg, arg) do {} while (0)
#endif
-static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
+static void NCR5380_trigger_irq(struct Scsi_Host *instance);
+static int NCR5380_probe_irq(struct Scsi_Host *instance);
static int NCR5380_init(struct Scsi_Host *instance, int flags);
static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
static void NCR5380_exit(struct Scsi_Host *instance);
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 7299ad9..3790ed5 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -265,7 +265,7 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
if (irq != IRQ_AUTO)
instance->irq = irq;
else
- instance->irq = NCR5380_probe_irq(instance, 0xffff);
+ instance->irq = NCR5380_probe_irq(instance);
/* Compatibility with documented NCR5380 kernel parameters */
if (instance->irq == 255)
--
Ondrej Zary
Trigger an IRQ first with a test IRQ handler to find out if it really
works. Disable the IRQ if not.
This prevents hang when incorrect IRQ was specified by user.
Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/scsi/g_NCR5380.c | 32 ++++++++++++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 3790ed5..261e168 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -67,6 +67,14 @@
MODULE_ALIAS("g_NCR5380_mmio");
MODULE_LICENSE("GPL");
+static bool irq_working;
+
+static irqreturn_t test_irq(int irq, void *dev_id)
+{
+ irq_working = true;
+ return IRQ_HANDLED;
+}
+
/*
* Configure I/O address of 53C400A or DTC436 by writing magic numbers
* to ports 0x779 and 0x379.
@@ -275,10 +283,30 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
/* set IRQ for HP C2502 */
if (board == BOARD_HP_C2502)
magic_configure(port_idx, instance->irq, magic);
- if (request_irq(instance->irq, generic_NCR5380_intr,
- 0, "NCR5380", instance)) {
+ /* test if the IRQ is working */
+ irq_working = false;
+ if (request_irq(instance->irq, test_irq,
+ 0, "NCR5380-irqtest", NULL)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = NO_IRQ;
+ } else {
+ NCR5380_trigger_irq(instance);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ free_irq(instance->irq, NULL);
+ if (irq_working) {
+ if (request_irq(instance->irq,
+ generic_NCR5380_intr, 0,
+ "NCR5380", instance)) {
+ printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n",
+ instance->host_no,
+ instance->irq);
+ instance->irq = NO_IRQ;
+ }
+ } else {
+ printk(KERN_WARNING "scsi%d : IRQ%d not working, interrupts disabled\n",
+ instance->host_no, instance->irq);
+ instance->irq = NO_IRQ;
+ }
}
}
--
Ondrej Zary
Read back MODE_REG after writing it in NCR5380_init() to check if the
chip is really there.
This prevents hang when incorrect I/O address was specified by user.
Signed-off-by: Ondrej Zary <[email protected]>
---
drivers/scsi/NCR5380.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 01c0027..ce3156d 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -495,6 +495,11 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
+ /* check if the chip is really there */
+ if (NCR5380_read(MODE_REG) != MR_BASE) {
+ NCR5380_exit(instance);
+ return -ENODEV;
+ }
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, 0);
--
Ondrej Zary
On Sun, 30 Oct 2016, Ondrej Zary wrote:
> Use standard probe_irq_on() and probe_irq_off() functions instead of own
> implementation.
Thanks for doing this.
> This prevents warning messages like this in the kernel log:
> genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080 (i8042)
>
> Move the IRQ trigger code to a separate function so it can be used for
> other purposes (testing if the IRQ works).
>
> Also add missing IRQ reset after probe.
>
> Signed-off-by: Ondrej Zary <[email protected]>
> ---
> drivers/scsi/NCR5380.c | 72 +++++++++++++++++-----------------------------
> drivers/scsi/NCR5380.h | 3 +-
> drivers/scsi/g_NCR5380.c | 2 +-
> 3 files changed, 29 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> index d849ffa..01c0027 100644
> --- a/drivers/scsi/NCR5380.c
> +++ b/drivers/scsi/NCR5380.c
> @@ -351,50 +351,13 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
> }
> #endif
>
> -
> -static int probe_irq;
> -
> -/**
> - * probe_intr - helper for IRQ autoprobe
> - * @irq: interrupt number
> - * @dev_id: unused
> - * @regs: unused
> - *
> - * Set a flag to indicate the IRQ in question was received. This is
> - * used by the IRQ probe code.
> - */
> -
> -static irqreturn_t probe_intr(int irq, void *dev_id)
> -{
> - probe_irq = irq;
> - return IRQ_HANDLED;
> -}
> -
> -/**
> - * NCR5380_probe_irq - find the IRQ of an NCR5380
> - * @instance: NCR5380 controller
> - * @possible: bitmask of ISA IRQ lines
> - *
> - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
> - * and then looking to see what interrupt actually turned up.
> - */
> -
> -static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
> - int possible)
> +static void NCR5380_trigger_irq(struct Scsi_Host *instance)
> {
> struct NCR5380_hostdata *hostdata = shost_priv(instance);
> - unsigned long timeout;
> - int trying_irqs, i, mask;
> -
> - for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
> - if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
> - trying_irqs |= mask;
> -
> - timeout = jiffies + msecs_to_jiffies(250);
> - probe_irq = NO_IRQ;
> + unsigned long timeout = jiffies + msecs_to_jiffies(2500);
>
> /*
> - * A interrupt is triggered whenever BSY = false, SEL = true
> + * An interrupt is triggered whenever BSY = false, SEL = true
> * and a bit set in the SELECT_ENABLE_REG is asserted on the
> * SCSI bus.
> *
> @@ -402,23 +365,40 @@ static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
> * (I/O, C/D, and MSG) match those in the TCR, so we must reset that
> * to zero.
> */
> -
> NCR5380_write(TARGET_COMMAND_REG, 0);
> NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
>
> - while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
> + while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) &&
> + time_before(jiffies, timeout))
> schedule_timeout_uninterruptible(1);
You don't need a 2.5 second timeout here. To raise the interrupt the chip
should not need more than a bus settle delay (400ns). Calling msleep(1)
should be plenty.
Better still, please drop the loop, the delay and the BASR_IRQ test here,
and if need be, put the delay in the caller. This routine discards the
result of that sequence anyway.
>
> NCR5380_write(SELECT_ENABLE_REG, 0);
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> +}
>
> - for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
> - if (trying_irqs & mask)
> - free_irq(i, NULL);
> +/**
> + * NCR5380_probe_irq - find the IRQ of an NCR5380
> + * @instance: NCR5380 controller
> + *
> + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
> + * and then looking to see what interrupt actually turned up.
> + */
> +
> +static int NCR5380_probe_irq(struct Scsi_Host *instance)
> +{
> + struct NCR5380_hostdata *hostdata = shost_priv(instance);
> + int irqs, irq;
> +
Please rename irqs to irq_mask.
Other drivers like tty/cyclades.c begin with,
/* forget possible initially masked and pending IRQ */
irq = probe_irq_off(probe_irq_on());
Perhaps we need that here too?
> + irqs = probe_irq_on();
You should clear any pending interrupt on the chip before you try to
trigger another one.
> + NCR5380_trigger_irq(instance);
Please do the msleep(1) here.
> + irq = probe_irq_off(irqs);
> + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> + if (irq < 0)
> + irq = 0;
Please use NO_IRQ instead of 0.
>
> - return probe_irq;
> + return irq;
> }
>
> /**
> diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
> index 3c6ce54..b2fca52 100644
> --- a/drivers/scsi/NCR5380.h
> +++ b/drivers/scsi/NCR5380.h
> @@ -290,7 +290,8 @@ static inline struct scsi_cmnd *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr)
> #define NCR5380_dprint_phase(flg, arg) do {} while (0)
> #endif
>
> -static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
> +static void NCR5380_trigger_irq(struct Scsi_Host *instance);
> +static int NCR5380_probe_irq(struct Scsi_Host *instance);
> static int NCR5380_init(struct Scsi_Host *instance, int flags);
> static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
> static void NCR5380_exit(struct Scsi_Host *instance);
Please move NCR5380_probe_irq and NCR5380_trigger_irq implementations and
prototypes out of the core driver and into g_NCR5380.c. The reason is, ISA
cards are probably the only 5380 cards ever likely to need manual IRQ
configuration. It would better to have g_NCR5380 support more ISA cards
than to add more ISA drivers, therefore this code isn't likely to be
needed in the core driver.
Thanks.
--
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index 7299ad9..3790ed5 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -265,7 +265,7 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
> if (irq != IRQ_AUTO)
> instance->irq = irq;
> else
> - instance->irq = NCR5380_probe_irq(instance, 0xffff);
> + instance->irq = NCR5380_probe_irq(instance);
>
> /* Compatibility with documented NCR5380 kernel parameters */
> if (instance->irq == 255)
>
On Sun, 30 Oct 2016, Ondrej Zary wrote:
> Trigger an IRQ first with a test IRQ handler to find out if it really
> works. Disable the IRQ if not.
>
> This prevents hang when incorrect IRQ was specified by user.
>
> Signed-off-by: Ondrej Zary <[email protected]>
> ---
> drivers/scsi/g_NCR5380.c | 32 ++++++++++++++++++++++++++++++--
> 1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> index 3790ed5..261e168 100644
> --- a/drivers/scsi/g_NCR5380.c
> +++ b/drivers/scsi/g_NCR5380.c
> @@ -67,6 +67,14 @@
> MODULE_ALIAS("g_NCR5380_mmio");
> MODULE_LICENSE("GPL");
>
> +static bool irq_working;
> +
> +static irqreturn_t test_irq(int irq, void *dev_id)
> +{
> + irq_working = true;
> + return IRQ_HANDLED;
> +}
> +
> /*
> * Configure I/O address of 53C400A or DTC436 by writing magic numbers
> * to ports 0x779 and 0x379.
> @@ -275,10 +283,30 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
> /* set IRQ for HP C2502 */
> if (board == BOARD_HP_C2502)
> magic_configure(port_idx, instance->irq, magic);
> - if (request_irq(instance->irq, generic_NCR5380_intr,
> - 0, "NCR5380", instance)) {
> + /* test if the IRQ is working */
> + irq_working = false;
> + if (request_irq(instance->irq, test_irq,
> + 0, "NCR5380-irqtest", NULL)) {
> printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
> instance->irq = NO_IRQ;
> + } else {
> + NCR5380_trigger_irq(instance);
> + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> + free_irq(instance->irq, NULL);
> + if (irq_working) {
> + if (request_irq(instance->irq,
> + generic_NCR5380_intr, 0,
> + "NCR5380", instance)) {
> + printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n",
> + instance->host_no,
> + instance->irq);
> + instance->irq = NO_IRQ;
> + }
> + } else {
> + printk(KERN_WARNING "scsi%d : IRQ%d not working, interrupts disabled\n",
> + instance->host_no, instance->irq);
> + instance->irq = NO_IRQ;
> + }
> }
> }
>
>
If the user omits to specify an irq, you can just default to IRQ_AUTO.
This might result in NO_IRQ, which gives the same result as this patch.
And when the user does specify an IRQ, we should trust them. So this
compexity doesn't add any value AFAICT. Thanks but no thanks.
--
On Sun, 30 Oct 2016, Ondrej Zary wrote:
> Read back MODE_REG after writing it in NCR5380_init() to check if the
> chip is really there.
>
> This prevents hang when incorrect I/O address was specified by user.
>
> Signed-off-by: Ondrej Zary <[email protected]>
> ---
> drivers/scsi/NCR5380.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> index 01c0027..ce3156d 100644
> --- a/drivers/scsi/NCR5380.c
> +++ b/drivers/scsi/NCR5380.c
> @@ -495,6 +495,11 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
>
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> NCR5380_write(MODE_REG, MR_BASE);
> + /* check if the chip is really there */
> + if (NCR5380_read(MODE_REG) != MR_BASE) {
> + NCR5380_exit(instance);
> + return -ENODEV;
> + }
This doesn't belong in the core driver. Only the 5380 ISA drivers have
configurable base addresses.
Also, MR_BASE == 0, so that test is likely to be ineffectual anyway. This
patch doesn't really add any value AFAICT.
--
> NCR5380_write(TARGET_COMMAND_REG, 0);
> NCR5380_write(SELECT_ENABLE_REG, 0);
>
>
On Sun, 30 Oct 2016, Ondrej Zary wrote:
> Read back MODE_REG after writing it in NCR5380_init() to check if the
> chip is really there.
>
> This prevents hang when incorrect I/O address was specified by user.
Do you know whereabouts in the driver the hang happens? Maybe there is a
robustness issue there.
Card type detection (and vacant slot detection) is a good idea but I'm not
sure how we can detect this chip reliably.
--
>
> Signed-off-by: Ondrej Zary <[email protected]>
> ---
> drivers/scsi/NCR5380.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> index 01c0027..ce3156d 100644
> --- a/drivers/scsi/NCR5380.c
> +++ b/drivers/scsi/NCR5380.c
> @@ -495,6 +495,11 @@ static int NCR5380_init(struct Scsi_Host *instance, int flags)
>
> NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> NCR5380_write(MODE_REG, MR_BASE);
> + /* check if the chip is really there */
> + if (NCR5380_read(MODE_REG) != MR_BASE) {
> + NCR5380_exit(instance);
> + return -ENODEV;
> + }
> NCR5380_write(TARGET_COMMAND_REG, 0);
> NCR5380_write(SELECT_ENABLE_REG, 0);
>
>
On Monday 31 October 2016, Finn Thain wrote:
> On Sun, 30 Oct 2016, Ondrej Zary wrote:
> > Read back MODE_REG after writing it in NCR5380_init() to check if the
> > chip is really there.
> >
> > This prevents hang when incorrect I/O address was specified by user.
> >
> > Signed-off-by: Ondrej Zary <[email protected]>
> > ---
> > drivers/scsi/NCR5380.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> > index 01c0027..ce3156d 100644
> > --- a/drivers/scsi/NCR5380.c
> > +++ b/drivers/scsi/NCR5380.c
> > @@ -495,6 +495,11 @@ static int NCR5380_init(struct Scsi_Host *instance,
> > int flags)
> >
> > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > NCR5380_write(MODE_REG, MR_BASE);
> > + /* check if the chip is really there */
> > + if (NCR5380_read(MODE_REG) != MR_BASE) {
> > + NCR5380_exit(instance);
> > + return -ENODEV;
> > + }
>
> This doesn't belong in the core driver. Only the 5380 ISA drivers have
> configurable base addresses.
>
> Also, MR_BASE == 0, so that test is likely to be ineffectual anyway. This
> patch doesn't really add any value AFAICT.
This fixes the most common problem: no device present at the specified I/O
address, all reads result in 0xff.
--
Ondrej Zary
On Monday 31 October 2016, Finn Thain wrote:
> On Sun, 30 Oct 2016, Ondrej Zary wrote:
> > Use standard probe_irq_on() and probe_irq_off() functions instead of own
> > implementation.
>
> Thanks for doing this.
>
> > This prevents warning messages like this in the kernel log:
> > genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080 (i8042)
> >
> > Move the IRQ trigger code to a separate function so it can be used for
> > other purposes (testing if the IRQ works).
> >
> > Also add missing IRQ reset after probe.
> >
> > Signed-off-by: Ondrej Zary <[email protected]>
> > ---
> > drivers/scsi/NCR5380.c | 72
> > +++++++++++++++++----------------------------- drivers/scsi/NCR5380.h |
> > 3 +-
> > drivers/scsi/g_NCR5380.c | 2 +-
> > 3 files changed, 29 insertions(+), 48 deletions(-)
> >
> > diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> > index d849ffa..01c0027 100644
> > --- a/drivers/scsi/NCR5380.c
> > +++ b/drivers/scsi/NCR5380.c
> > @@ -351,50 +351,13 @@ static void NCR5380_print_phase(struct Scsi_Host
> > *instance) }
> > #endif
> >
> > -
> > -static int probe_irq;
> > -
> > -/**
> > - * probe_intr - helper for IRQ autoprobe
> > - * @irq: interrupt number
> > - * @dev_id: unused
> > - * @regs: unused
> > - *
> > - * Set a flag to indicate the IRQ in question was received. This is
> > - * used by the IRQ probe code.
> > - */
> > -
> > -static irqreturn_t probe_intr(int irq, void *dev_id)
> > -{
> > - probe_irq = irq;
> > - return IRQ_HANDLED;
> > -}
> > -
> > -/**
> > - * NCR5380_probe_irq - find the IRQ of an NCR5380
> > - * @instance: NCR5380 controller
> > - * @possible: bitmask of ISA IRQ lines
> > - *
> > - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
> > - * and then looking to see what interrupt actually turned up.
> > - */
> > -
> > -static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
> > - int possible)
> > +static void NCR5380_trigger_irq(struct Scsi_Host *instance)
> > {
> > struct NCR5380_hostdata *hostdata = shost_priv(instance);
> > - unsigned long timeout;
> > - int trying_irqs, i, mask;
> > -
> > - for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
> > - if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe",
> > NULL) == 0)) - trying_irqs |= mask;
> > -
> > - timeout = jiffies + msecs_to_jiffies(250);
> > - probe_irq = NO_IRQ;
> > + unsigned long timeout = jiffies + msecs_to_jiffies(2500);
> >
> > /*
> > - * A interrupt is triggered whenever BSY = false, SEL = true
> > + * An interrupt is triggered whenever BSY = false, SEL = true
> > * and a bit set in the SELECT_ENABLE_REG is asserted on the
> > * SCSI bus.
> > *
> > @@ -402,23 +365,40 @@ static int __maybe_unused NCR5380_probe_irq(struct
> > Scsi_Host *instance, * (I/O, C/D, and MSG) match those in the TCR, so we
> > must reset that * to zero.
> > */
> > -
> > NCR5380_write(TARGET_COMMAND_REG, 0);
> > NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> > NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
> > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
> > ICR_ASSERT_SEL);
> >
> > - while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
> > + while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) &&
> > + time_before(jiffies, timeout))
> > schedule_timeout_uninterruptible(1);
>
> You don't need a 2.5 second timeout here. To raise the interrupt the chip
> should not need more than a bus settle delay (400ns). Calling msleep(1)
> should be plenty.
Yes, 2.5s is a mistake (leftover from testing), sorry.
> Better still, please drop the loop, the delay and the BASR_IRQ test here,
> and if need be, put the delay in the caller. This routine discards the
> result of that sequence anyway.
Will if work if the following lines are executed before the delay?
>
> > NCR5380_write(SELECT_ENABLE_REG, 0);
> > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > +}
> >
> > - for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
> > - if (trying_irqs & mask)
> > - free_irq(i, NULL);
> > +/**
> > + * NCR5380_probe_irq - find the IRQ of an NCR5380
> > + * @instance: NCR5380 controller
> > + *
> > + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
> > + * and then looking to see what interrupt actually turned up.
> > + */
> > +
> > +static int NCR5380_probe_irq(struct Scsi_Host *instance)
> > +{
> > + struct NCR5380_hostdata *hostdata = shost_priv(instance);
> > + int irqs, irq;
> > +
>
> Please rename irqs to irq_mask.
>
> Other drivers like tty/cyclades.c begin with,
>
> /* forget possible initially masked and pending IRQ */
> irq = probe_irq_off(probe_irq_on());
>
> Perhaps we need that here too?
Only cyclades and 8250_port do that, other drivers don't.
Don't know what exact problem should that solve.
>
> > + irqs = probe_irq_on();
>
> You should clear any pending interrupt on the chip before you try to
> trigger another one.
>
> > + NCR5380_trigger_irq(instance);
>
> Please do the msleep(1) here.
>
> > + irq = probe_irq_off(irqs);
> > + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> > + if (irq < 0)
> > + irq = 0;
>
> Please use NO_IRQ instead of 0.
>
> > - return probe_irq;
> > + return irq;
> > }
> >
> > /**
> > diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
> > index 3c6ce54..b2fca52 100644
> > --- a/drivers/scsi/NCR5380.h
> > +++ b/drivers/scsi/NCR5380.h
> > @@ -290,7 +290,8 @@ static inline struct scsi_cmnd
> > *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr) #define
> > NCR5380_dprint_phase(flg, arg) do {} while (0)
> > #endif
> >
> > -static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
> > +static void NCR5380_trigger_irq(struct Scsi_Host *instance);
> > +static int NCR5380_probe_irq(struct Scsi_Host *instance);
> > static int NCR5380_init(struct Scsi_Host *instance, int flags);
> > static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
> > static void NCR5380_exit(struct Scsi_Host *instance);
>
> Please move NCR5380_probe_irq and NCR5380_trigger_irq implementations and
> prototypes out of the core driver and into g_NCR5380.c. The reason is, ISA
> cards are probably the only 5380 cards ever likely to need manual IRQ
> configuration. It would better to have g_NCR5380 support more ISA cards
> than to add more ISA drivers, therefore this code isn't likely to be
> needed in the core driver.
>
> Thanks.
--
Ondrej Zary
On Monday 31 October 2016, Finn Thain wrote:
> On Sun, 30 Oct 2016, Ondrej Zary wrote:
> > Trigger an IRQ first with a test IRQ handler to find out if it really
> > works. Disable the IRQ if not.
> >
> > This prevents hang when incorrect IRQ was specified by user.
> >
> > Signed-off-by: Ondrej Zary <[email protected]>
> > ---
> > drivers/scsi/g_NCR5380.c | 32 ++++++++++++++++++++++++++++++--
> > 1 file changed, 30 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> > index 3790ed5..261e168 100644
> > --- a/drivers/scsi/g_NCR5380.c
> > +++ b/drivers/scsi/g_NCR5380.c
> > @@ -67,6 +67,14 @@
> > MODULE_ALIAS("g_NCR5380_mmio");
> > MODULE_LICENSE("GPL");
> >
> > +static bool irq_working;
> > +
> > +static irqreturn_t test_irq(int irq, void *dev_id)
> > +{
> > + irq_working = true;
> > + return IRQ_HANDLED;
> > +}
> > +
> > /*
> > * Configure I/O address of 53C400A or DTC436 by writing magic numbers
> > * to ports 0x779 and 0x379.
> > @@ -275,10 +283,30 @@ static int generic_NCR5380_init_one(struct
> > scsi_host_template *tpnt, /* set IRQ for HP C2502 */
> > if (board == BOARD_HP_C2502)
> > magic_configure(port_idx, instance->irq, magic);
> > - if (request_irq(instance->irq, generic_NCR5380_intr,
> > - 0, "NCR5380", instance)) {
> > + /* test if the IRQ is working */
> > + irq_working = false;
> > + if (request_irq(instance->irq, test_irq,
> > + 0, "NCR5380-irqtest", NULL)) {
> > printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n",
> > instance->host_no, instance->irq); instance->irq = NO_IRQ;
> > + } else {
> > + NCR5380_trigger_irq(instance);
> > + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> > + free_irq(instance->irq, NULL);
> > + if (irq_working) {
> > + if (request_irq(instance->irq,
> > + generic_NCR5380_intr, 0,
> > + "NCR5380", instance)) {
> > + printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts
> > disabled\n", + instance->host_no,
> > + instance->irq);
> > + instance->irq = NO_IRQ;
> > + }
> > + } else {
> > + printk(KERN_WARNING "scsi%d : IRQ%d not working, interrupts
> > disabled\n", + instance->host_no, instance->irq);
> > + instance->irq = NO_IRQ;
> > + }
> > }
> > }
>
> If the user omits to specify an irq, you can just default to IRQ_AUTO.
> This might result in NO_IRQ, which gives the same result as this patch.
Looks like a good idea.
> And when the user does specify an IRQ, we should trust them. So this
> compexity doesn't add any value AFAICT. Thanks but no thanks.
This fixes a real problem: specifying wrong IRQ hangs the machine completely.
It's really easy - if the IRQ is free but configured in BIOS as PCI IRQ (not
ISA). Everything seems fine except the IRQ will never trigger.
--
Ondrej Zary
On Mon, 31 Oct 2016, Ondrej Zary wrote:
> On Monday 31 October 2016, Finn Thain wrote:
> > On Sun, 30 Oct 2016, Ondrej Zary wrote:
> > > Read back MODE_REG after writing it in NCR5380_init() to check if the
> > > chip is really there.
> > >
> > > This prevents hang when incorrect I/O address was specified by user.
> > >
> > > Signed-off-by: Ondrej Zary <[email protected]>
> > > ---
> > > drivers/scsi/NCR5380.c | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> > > diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> > > index 01c0027..ce3156d 100644
> > > --- a/drivers/scsi/NCR5380.c
> > > +++ b/drivers/scsi/NCR5380.c
> > > @@ -495,6 +495,11 @@ static int NCR5380_init(struct Scsi_Host *instance,
> > > int flags)
> > >
> > > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > > NCR5380_write(MODE_REG, MR_BASE);
> > > + /* check if the chip is really there */
> > > + if (NCR5380_read(MODE_REG) != MR_BASE) {
> > > + NCR5380_exit(instance);
> > > + return -ENODEV;
> > > + }
> >
> > This doesn't belong in the core driver. Only the 5380 ISA drivers have
> > configurable base addresses.
> >
> > Also, MR_BASE == 0, so that test is likely to be ineffectual anyway.
> > This patch doesn't really add any value AFAICT.
>
> This fixes the most common problem: no device present at the specified
> I/O address, all reads result in 0xff.
>
ISTR that's true for ISA in general, so I guess it would be okay in
g_NCR5380.c.
Better do this before NCR5380_init() so you can probe before allocating a
scsi host. Just write 0 to MODE_REG or SELECT_ENABLE_REG.
--
On Mon, 31 Oct 2016, Ondrej Zary wrote:
> On Monday 31 October 2016, Finn Thain wrote:
> > On Sun, 30 Oct 2016, Ondrej Zary wrote:
> > > Use standard probe_irq_on() and probe_irq_off() functions instead of own
> > > implementation.
> >
> > Thanks for doing this.
> >
> > > This prevents warning messages like this in the kernel log:
> > > genirq: Flags mismatch irq 1. 00000000 (NCR-probe) vs. 00000080 (i8042)
> > >
> > > Move the IRQ trigger code to a separate function so it can be used for
> > > other purposes (testing if the IRQ works).
> > >
> > > Also add missing IRQ reset after probe.
> > >
> > > Signed-off-by: Ondrej Zary <[email protected]>
> > > ---
> > > drivers/scsi/NCR5380.c | 72
> > > +++++++++++++++++----------------------------- drivers/scsi/NCR5380.h |
> > > 3 +-
> > > drivers/scsi/g_NCR5380.c | 2 +-
> > > 3 files changed, 29 insertions(+), 48 deletions(-)
> > >
> > > diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
> > > index d849ffa..01c0027 100644
> > > --- a/drivers/scsi/NCR5380.c
> > > +++ b/drivers/scsi/NCR5380.c
> > > @@ -351,50 +351,13 @@ static void NCR5380_print_phase(struct Scsi_Host
> > > *instance) }
> > > #endif
> > >
> > > -
> > > -static int probe_irq;
> > > -
> > > -/**
> > > - * probe_intr - helper for IRQ autoprobe
> > > - * @irq: interrupt number
> > > - * @dev_id: unused
> > > - * @regs: unused
> > > - *
> > > - * Set a flag to indicate the IRQ in question was received. This is
> > > - * used by the IRQ probe code.
> > > - */
> > > -
> > > -static irqreturn_t probe_intr(int irq, void *dev_id)
> > > -{
> > > - probe_irq = irq;
> > > - return IRQ_HANDLED;
> > > -}
> > > -
> > > -/**
> > > - * NCR5380_probe_irq - find the IRQ of an NCR5380
> > > - * @instance: NCR5380 controller
> > > - * @possible: bitmask of ISA IRQ lines
> > > - *
> > > - * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
> > > - * and then looking to see what interrupt actually turned up.
> > > - */
> > > -
> > > -static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
> > > - int possible)
> > > +static void NCR5380_trigger_irq(struct Scsi_Host *instance)
> > > {
> > > struct NCR5380_hostdata *hostdata = shost_priv(instance);
> > > - unsigned long timeout;
> > > - int trying_irqs, i, mask;
> > > -
> > > - for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
> > > - if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe",
> > > NULL) == 0)) - trying_irqs |= mask;
> > > -
> > > - timeout = jiffies + msecs_to_jiffies(250);
> > > - probe_irq = NO_IRQ;
> > > + unsigned long timeout = jiffies + msecs_to_jiffies(2500);
> > >
> > > /*
> > > - * A interrupt is triggered whenever BSY = false, SEL = true
> > > + * An interrupt is triggered whenever BSY = false, SEL = true
> > > * and a bit set in the SELECT_ENABLE_REG is asserted on the
> > > * SCSI bus.
> > > *
> > > @@ -402,23 +365,40 @@ static int __maybe_unused NCR5380_probe_irq(struct
> > > Scsi_Host *instance, * (I/O, C/D, and MSG) match those in the TCR, so we
> > > must reset that * to zero.
> > > */
> > > -
> > > NCR5380_write(TARGET_COMMAND_REG, 0);
> > > NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
> > > NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
> > > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA |
> > > ICR_ASSERT_SEL);
> > >
> > > - while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
> > > + while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_IRQ) &&
> > > + time_before(jiffies, timeout))
> > > schedule_timeout_uninterruptible(1);
> >
> > You don't need a 2.5 second timeout here. To raise the interrupt the chip
> > should not need more than a bus settle delay (400ns). Calling msleep(1)
> > should be plenty.
>
> Yes, 2.5s is a mistake (leftover from testing), sorry.
>
> > Better still, please drop the loop, the delay and the BASR_IRQ test here,
> > and if need be, put the delay in the caller. This routine discards the
> > result of that sequence anyway.
>
> Will if work if the following lines are executed before the delay?
I think so... but you're right, it is better if the delay remains here.
>
> >
> > > NCR5380_write(SELECT_ENABLE_REG, 0);
> > > NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
> > > +}
> > >
> > > - for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
> > > - if (trying_irqs & mask)
> > > - free_irq(i, NULL);
> > > +/**
> > > + * NCR5380_probe_irq - find the IRQ of an NCR5380
> > > + * @instance: NCR5380 controller
> > > + *
> > > + * Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
> > > + * and then looking to see what interrupt actually turned up.
> > > + */
> > > +
> > > +static int NCR5380_probe_irq(struct Scsi_Host *instance)
> > > +{
> > > + struct NCR5380_hostdata *hostdata = shost_priv(instance);
> > > + int irqs, irq;
> > > +
> >
> > Please rename irqs to irq_mask.
> >
> > Other drivers like tty/cyclades.c begin with,
> >
> > /* forget possible initially masked and pending IRQ */
> > irq = probe_irq_off(probe_irq_on());
> >
> > Perhaps we need that here too?
>
> Only cyclades and 8250_port do that, other drivers don't.
> Don't know what exact problem should that solve.
OK. I'm no expert on ISA so I'll leave it up to you.
--
>
> >
> > > + irqs = probe_irq_on();
> >
> > You should clear any pending interrupt on the chip before you try to
> > trigger another one.
> >
> > > + NCR5380_trigger_irq(instance);
> >
> > Please do the msleep(1) here.
> >
> > > + irq = probe_irq_off(irqs);
> > > + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> > > + if (irq < 0)
> > > + irq = 0;
> >
> > Please use NO_IRQ instead of 0.
> >
> > > - return probe_irq;
> > > + return irq;
> > > }
> > >
> > > /**
> > > diff --git a/drivers/scsi/NCR5380.h b/drivers/scsi/NCR5380.h
> > > index 3c6ce54..b2fca52 100644
> > > --- a/drivers/scsi/NCR5380.h
> > > +++ b/drivers/scsi/NCR5380.h
> > > @@ -290,7 +290,8 @@ static inline struct scsi_cmnd
> > > *NCR5380_to_scmd(struct NCR5380_cmd *ncmd_ptr) #define
> > > NCR5380_dprint_phase(flg, arg) do {} while (0)
> > > #endif
> > >
> > > -static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
> > > +static void NCR5380_trigger_irq(struct Scsi_Host *instance);
> > > +static int NCR5380_probe_irq(struct Scsi_Host *instance);
> > > static int NCR5380_init(struct Scsi_Host *instance, int flags);
> > > static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
> > > static void NCR5380_exit(struct Scsi_Host *instance);
> >
> > Please move NCR5380_probe_irq and NCR5380_trigger_irq implementations
> > and prototypes out of the core driver and into g_NCR5380.c. The reason
> > is, ISA cards are probably the only 5380 cards ever likely to need
> > manual IRQ configuration. It would better to have g_NCR5380 support
> > more ISA cards than to add more ISA drivers, therefore this code isn't
> > likely to be needed in the core driver.
> >
> > Thanks.
>
>
>
>
On Mon, 31 Oct 2016, Ondrej Zary wrote:
> On Monday 31 October 2016, Finn Thain wrote:
> > On Sun, 30 Oct 2016, Ondrej Zary wrote:
> > > Trigger an IRQ first with a test IRQ handler to find out if it really
> > > works. Disable the IRQ if not.
> > >
> > > This prevents hang when incorrect IRQ was specified by user.
> > >
> > > Signed-off-by: Ondrej Zary <[email protected]>
> > > ---
> > > drivers/scsi/g_NCR5380.c | 32 ++++++++++++++++++++++++++++++--
> > > 1 file changed, 30 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
> > > index 3790ed5..261e168 100644
> > > --- a/drivers/scsi/g_NCR5380.c
> > > +++ b/drivers/scsi/g_NCR5380.c
> > > @@ -67,6 +67,14 @@
> > > MODULE_ALIAS("g_NCR5380_mmio");
> > > MODULE_LICENSE("GPL");
> > >
> > > +static bool irq_working;
> > > +
> > > +static irqreturn_t test_irq(int irq, void *dev_id)
> > > +{
> > > + irq_working = true;
> > > + return IRQ_HANDLED;
> > > +}
> > > +
> > > /*
> > > * Configure I/O address of 53C400A or DTC436 by writing magic numbers
> > > * to ports 0x779 and 0x379.
> > > @@ -275,10 +283,30 @@ static int generic_NCR5380_init_one(struct
> > > scsi_host_template *tpnt, /* set IRQ for HP C2502 */
> > > if (board == BOARD_HP_C2502)
> > > magic_configure(port_idx, instance->irq, magic);
> > > - if (request_irq(instance->irq, generic_NCR5380_intr,
> > > - 0, "NCR5380", instance)) {
> > > + /* test if the IRQ is working */
> > > + irq_working = false;
> > > + if (request_irq(instance->irq, test_irq,
> > > + 0, "NCR5380-irqtest", NULL)) {
> > > printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n",
> > > instance->host_no, instance->irq); instance->irq = NO_IRQ;
> > > + } else {
> > > + NCR5380_trigger_irq(instance);
> > > + NCR5380_read(RESET_PARITY_INTERRUPT_REG);
> > > + free_irq(instance->irq, NULL);
> > > + if (irq_working) {
> > > + if (request_irq(instance->irq,
> > > + generic_NCR5380_intr, 0,
> > > + "NCR5380", instance)) {
> > > + printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts
> > > disabled\n", + instance->host_no,
> > > + instance->irq);
> > > + instance->irq = NO_IRQ;
> > > + }
> > > + } else {
> > > + printk(KERN_WARNING "scsi%d : IRQ%d not working, interrupts
> > > disabled\n", + instance->host_no, instance->irq);
> > > + instance->irq = NO_IRQ;
> > > + }
> > > }
> > > }
> >
> > If the user omits to specify an irq, you can just default to IRQ_AUTO.
> > This might result in NO_IRQ, which gives the same result as this
> > patch.
>
> Looks like a good idea.
>
> > And when the user does specify an IRQ, we should trust them. So this
> > compexity doesn't add any value AFAICT. Thanks but no thanks.
>
> This fixes a real problem: specifying wrong IRQ hangs the machine
> completely.
>
> It's really easy - if the IRQ is free but configured in BIOS as PCI IRQ
> (not ISA). Everything seems fine except the IRQ will never trigger.
>
>
How does that cause a hang? I'd expect scsi command timeouts, but there
are any number of module parameters that the user can stuff up which will
lead to command timeouts. I expect the same could be said of BIOS
settings.
--