From: Jagan Teki <[email protected]>
usdhc1 is enabled and assigned pinctrl-0 on imx6ul-geam.dtsi
but same thing done on imx6ul-geam-kit.dts, so remove this
re-enabled node from the same.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- New patch
arch/arm/boot/dts/imx6ul-geam-kit.dts | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts
index 142e60c..40de2d7 100644
--- a/arch/arm/boot/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts
@@ -88,12 +88,6 @@
};
};
-&usdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc1>;
- status = "okay";
-};
-
&tsc {
measure-delay-time = <0x1ffff>;
pre-charge-time = <0x1fff>;
--
2.7.4
From: Jagan Teki <[email protected]>
GEAM6UL SOM does have single module, it doesn't come with
any variants. Maintaining imx6ul-geam.dtsi make no sense
so move all devices from .dtsi into dts file and drop the same.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- New patch
arch/arm/boot/dts/imx6ul-geam-kit.dts | 353 ++++++++++++++++++++++++++++-
arch/arm/boot/dts/imx6ul-geam.dtsi | 406 ----------------------------------
2 files changed, 351 insertions(+), 408 deletions(-)
delete mode 100644 arch/arm/boot/dts/imx6ul-geam.dtsi
diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam-kit.dts
index 40de2d7..d709252 100644
--- a/arch/arm/boot/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/boot/dts/imx6ul-geam-kit.dts
@@ -43,29 +43,133 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
-#include "imx6ul-geam.dtsi"
+#include <dt-bindings/input/input.h>
+#include "imx6ul.dtsi"
/ {
model = "Engicam GEAM6UL";
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
+
+ memory {
+ reg = <0x80000000 0x08000000>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm8 0 100000>;
+ brightness-levels = < 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100>;
+ default-brightness-level = <100>;
+ };
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ reg_1p8v: regulator-1p8v {
+ compatible = "regulator-fixed";
+ regulator-name = "1P8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_3p3v>;
status = "okay";
};
&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
display = <&display0>;
status = "okay";
display0: display {
bits-per-pixel = <16>;
bus-width = <18>;
- status = "okay";
display-timings {
native-mode = <&timing0>;
@@ -88,8 +192,253 @@
};
};
+&pwm8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm8>;
+ status = "okay";
+};
+
+&tsc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ status = "okay";
+};
+
&tsc {
measure-delay-time = <0x1ffff>;
pre-charge-time = <0x1fff>;
status = "okay";
};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+ bus-width = <4>;
+ cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* ENET_nRST */
+ MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
+ MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x4001b031
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpmi-nand {
+ fsl,pins = <
+ MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
+ MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
+ MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
+ MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
+ MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
+ MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
+ MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
+ MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
+ MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
+ MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
+ MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
+ MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
+ MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
+ MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
+ MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+ MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdifctrlgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
+ MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
+ MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
+ MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdifdatgrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
+ MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
+ MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
+ MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
+ MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
+ MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
+ MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
+ MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
+ MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
+ MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
+ MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
+ MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
+ MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
+ MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
+ MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
+ MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
+ MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
+ MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
+ >;
+ };
+
+ pinctrl_pwm8: pwm8grp {
+ fsl,pins = <
+ MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_tsc: tscgrp {
+ fsl,pin = <
+ MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
+ >;
+ };
+
+ pinctrl_sai2: sai2grp {
+ fsl,pins = <
+ MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
+ MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
+ MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
+ MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
+ MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
+ MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
+ MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17070
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x10070
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17070
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17070
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17070
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17070
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6ul-geam.dtsi b/arch/arm/boot/dts/imx6ul-geam.dtsi
deleted file mode 100644
index eb94d95..0000000
--- a/arch/arm/boot/dts/imx6ul-geam.dtsi
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * Copyright (C) 2016 Amarula Solutions B.V.
- * Copyright (C) 2016 Engicam S.r.l.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "imx6ul.dtsi"
-
-/ {
- memory {
- reg = <0x80000000 0x08000000>;
- };
-
- backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm8 0 100000>;
- brightness-levels = < 0 1 2 3 4 5 6 7 8 9
- 10 11 12 13 14 15 16 17 18 19
- 20 21 22 23 24 25 26 27 28 29
- 30 31 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47 48 49
- 50 51 52 53 54 55 56 57 58 59
- 60 61 62 63 64 65 66 67 68 69
- 70 71 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87 88 89
- 90 91 92 93 94 95 96 97 98 99
- 100>;
- default-brightness-level = <100>;
- };
-
- chosen {
- stdout-path = &uart1;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "1P8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "3P3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&can1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan1>;
- xceiver-supply = <®_3p3v>;
-};
-
-&can2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_flexcan2>;
- xceiver-supply = <®_3p3v>;
-};
-
-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet1>;
- phy-mode = "rmii";
- phy-handle = <ðphy0>;
- status = "okay";
-};
-
-&fec2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet2>;
- phy-mode = "rmii";
- phy-handle = <ðphy1>;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- };
-
- ethphy1: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <1>;
- };
- };
-};
-
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
- status = "okay";
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-};
-
-&i2c2 {
- clock_frequency = <100000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-};
-
-&lcdif {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_lcdif_dat
- &pinctrl_lcdif_ctrl>;
- display = <&display0>;
-};
-
-&pwm8 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm8>;
- status = "okay";
-};
-
-&tsc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_tsc>;
- xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
-};
-
-&sai2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai2>;
- status = "okay";
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usbotg1 {
- dr_mode = "peripheral";
- status = "okay";
-};
-
-&usbotg2 {
- dr_mode = "host";
- status = "okay";
-};
-
-&usdhc1 {
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc1>;
- pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
- bus-width = <4>;
- cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
- no-1-8-v;
- status = "okay";
-};
-
-&iomuxc {
- pinctrl_enet1: enet1grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
- MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
- MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
- MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
- >;
- };
-
- pinctrl_enet2: enet2grp {
- fsl,pins = <
- MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
- MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
- MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
- MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* ENET_nRST */
- MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
- MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
- MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
- MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
- MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x4001b031
- >;
- };
-
- pinctrl_flexcan1: flexcan1grp {
- fsl,pins = <
- MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
- MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
- >;
- };
-
- pinctrl_flexcan2: flexcan2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
- MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
- >;
- };
-
- pinctrl_gpmi_nand: gpmi-nand {
- fsl,pins = <
- MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
- MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
- MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
- MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
- MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
- MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
- MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
- MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
- MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
- MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
- MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
- MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
- MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
- MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
- MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
- MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
- MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
- >;
- };
-
- pinctrl_lcdif_ctrl: lcdifctrlgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
- MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
- MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
- MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
- >;
- };
-
- pinctrl_lcdif_dat: lcdifdatgrp {
- fsl,pins = <
- MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
- MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
- MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
- MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
- MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
- MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
- MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
- MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
- MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
- MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
- MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
- MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
- MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
- MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
- MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
- MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
- MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
- MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
- >;
- };
-
- pinctrl_pwm8: pwm8grp {
- fsl,pins = <
- MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
- >;
- };
-
- pinctrl_tsc: tscgrp {
- fsl,pin = <
- MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
- MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
- MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
- MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
- >;
- };
-
- pinctrl_sai2: sai2grp {
- fsl,pins = <
- MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
- MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
- MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
- MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
- MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
- MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
- MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
- MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
- MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
- >;
- };
-
- pinctrl_usdhc1: usdhc1grp {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
- >;
- };
-
- pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
- >;
- };
-
- pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
- fsl,pins = <
- MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
- MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
- MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
- MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
- MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
- MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17070
- MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x10070
- MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17070
- MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17070
- MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17070
- MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17070
- >;
- };
-};
--
2.7.4
From: Jagan Teki <[email protected]>
Add support for Sound card and related codec(via i2c1) nodes
on Engicam GEAM6UL variant module boards.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- keep sound and related i2c1 on dts
Changes for v3:
- Replace fsl,imx-audio-sgtl5000 and use simple-audio-card
Changes for v2:
- Use proper [label:] node-name[@unit-address] for codec
- Remove incorrect codec property 'wlf,shared-lrclk'
- Remove 'gpr' from sound card node
arch/arm/boot/dts/imx6ul-geam.dts | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-geam.dts b/arch/arm/boot/dts/imx6ul-geam.dts
index e251ad2..571eea7 100644
--- a/arch/arm/boot/dts/imx6ul-geam.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -92,6 +92,32 @@
regulator-always-on;
regulator-boot-on;
};
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "imx6ul-geam-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ };
+ };
};
&can1 {
@@ -151,6 +177,16 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
+
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks IMX6UL_CLK_OSC>;
+ clock-names = "mclk";
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ VDDD-supply = <®_1p8v>;
+ };
};
&i2c2 {
--
2.7.4
From: Jagan Teki <[email protected]>
Engicam SOM's with mounted on starter kits like icorem6(rqs), isiot
usually not explicitly named with -kit in dts file names and
instead Model has mentioned 'Starter kit' So apply the same rule
for geam SOM as well.
Signed-off-by: Jagan Teki <[email protected]>
---
Changes for v4:
- New patch
arch/arm/boot/dts/Makefile | 2 +-
arch/arm/boot/dts/{imx6ul-geam-kit.dts => imx6ul-geam.dts} | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
rename arch/arm/boot/dts/{imx6ul-geam-kit.dts => imx6ul-geam.dts} (99%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9449493..824db0e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -466,7 +466,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-udoo-neo-full.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
- imx6ul-geam-kit.dtb \
+ imx6ul-geam.dtb \
imx6ul-isiot-emmc.dtb \
imx6ul-isiot-nand.dtb \
imx6ul-liteboard.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-geam-kit.dts b/arch/arm/boot/dts/imx6ul-geam.dts
similarity index 99%
rename from arch/arm/boot/dts/imx6ul-geam-kit.dts
rename to arch/arm/boot/dts/imx6ul-geam.dts
index d709252..e251ad2 100644
--- a/arch/arm/boot/dts/imx6ul-geam-kit.dts
+++ b/arch/arm/boot/dts/imx6ul-geam.dts
@@ -47,7 +47,7 @@
#include "imx6ul.dtsi"
/ {
- model = "Engicam GEAM6UL";
+ model = "Engicam GEAM6UL Starter Kit";
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
memory {
--
2.7.4
On Fri, Jun 16, 2017 at 12:34:37PM +0530, Jagan Teki wrote:
> From: Jagan Teki <[email protected]>
>
> usdhc1 is enabled and assigned pinctrl-0 on imx6ul-geam.dtsi
> but same thing done on imx6ul-geam-kit.dts, so remove this
> re-enabled node from the same.
>
> Signed-off-by: Jagan Teki <[email protected]>
Applied all, thanks.