This series is based on v4.9-rc1 and adds scpsys power domain support
for Mediatek MT2701.
To share the code between MT2701 and MT8173, this patchset also refined
original mtk-scpsys.c to separate common codes and platform codes, so
that mtk-scpsys.c can support new SoCs more easily.
MT8173 and MT2701 scpsys init level are now subsys_init. Please refer to [1]
to see discussion details.
changes since v8:
- Rebase to v4.9-rc1.
- Refine implementation in init_clks() and init_scp().
changes since v7:
- Add clk_id for each scp_domain_data define.
- Minor coding style changes.
changes since v6:
- Minor changes in the dt-binding document.
changes since v5:
- Rebase to v4.6-rc1.
- Add dependent clocks for MFG, ISP, ETH and HIF power domains.
- Add "ethif" as a dependent clock in scpsys dt-binding document.
changes since v4:
- Rebase to v4.5-rc4.
- Remove mtk-scpsys.h and Merge its code into mtk-scpsys.c.
- Add names for every controlling registers and bits.
- Include dt-bindings headers at the beginning of mtk-scpsys.c.
- Sort compatible string in dt-binding documents.
changes since v3:
- Implement MT8173 and MT2701 scpsys drivers in a signle file.
- Remove naming of registers that can't be shared among SoCs.
changes since v2:
- Rebase to mbgg/linux-mediatek v4.4-next/soc [1].
- Remove MTK_SCPSYS_MT8173 and MTK_SCPSYS_MT2701.
- Modify scpsys dt-binding document to support MT2701.
changes since v1:
- Make MTK_SCPSYS in Kconfig invisible from users.
- Add comments for changing scpsys init level to subsys_init.
[1] http://lists.infradead.org/pipermail/linux-mediatek/2015-December/003416.html
James Liao (2):
soc: mediatek: Refine scpsys to support multiple platform
soc: mediatek: Init MT8173 scpsys driver earlier
Shunli Wang (2):
soc: mediatek: Add MT2701 power dt-bindings
soc: mediatek: Add MT2701 scpsys driver
.../devicetree/bindings/soc/mediatek/scpsys.txt | 13 +-
drivers/soc/mediatek/Kconfig | 2 +-
drivers/soc/mediatek/mtk-scpsys.c | 484 +++++++++++++++------
include/dt-bindings/power/mt2701-power.h | 27 ++
4 files changed, 380 insertions(+), 146 deletions(-)
create mode 100644 include/dt-bindings/power/mt2701-power.h
--
1.9.1
Some power domain comsumers may init before module_init.
So the power domain provider (scpsys) need to be initialized
earlier too.
Take an example for our IOMMU (M4U) and SMI. SMI is a bridge
between IOMMU and multimedia HW. SMI is responsible to
enable/disable iommu and help transfer data for each multimedia
HW. Both of them have to wait until the power and clocks are
enabled.
So scpsys driver should be initialized before SMI, and SMI should
be initialized before IOMMU, and then init IOMMU consumers
(display/vdec/venc/camera etc.).
IOMMU is subsys_init by default. So we need to init scpsys driver
before subsys_init.
Signed-off-by: James Liao <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
---
drivers/soc/mediatek/mtk-scpsys.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index fa9ee69..dd7a07d 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -613,4 +613,21 @@ static int scpsys_probe(struct platform_device *pdev)
.of_match_table = of_match_ptr(of_scpsys_match_tbl),
},
};
-builtin_platform_driver(scpsys_drv);
+
+static int __init scpsys_drv_init(void)
+{
+ return platform_driver_register(&scpsys_drv);
+}
+
+/*
+ * There are some Mediatek drivers which depend on the power domain driver need
+ * to probe in earlier initcall levels. So scpsys driver also need to probe
+ * earlier.
+ *
+ * IOMMU(M4U) and SMI drivers for example. SMI is a bridge between IOMMU and
+ * multimedia HW. IOMMU depends on SMI, and SMI is a power domain consumer,
+ * so the proper probe sequence should be scpsys -> SMI -> IOMMU driver.
+ * IOMMU drivers are initialized during subsys_init by default, so we need to
+ * move SMI and scpsys drivers to subsys_init or earlier init levels.
+ */
+subsys_initcall(scpsys_drv_init);
--
1.9.1
Refine scpsys driver common code to support multiple SoC / platform.
Signed-off-by: James Liao <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
---
drivers/soc/mediatek/mtk-scpsys.c | 348 +++++++++++++++++++++++---------------
1 file changed, 210 insertions(+), 138 deletions(-)
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index 837effe..fa9ee69 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -11,17 +11,15 @@
* GNU General Public License for more details.
*/
#include <linux/clk.h>
-#include <linux/delay.h>
+#include <linux/init.h>
#include <linux/io.h>
-#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
-#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
-#include <linux/regmap.h>
-#include <linux/soc/mediatek/infracfg.h>
#include <linux/regulator/consumer.h>
+#include <linux/soc/mediatek/infracfg.h>
+
#include <dt-bindings/power/mt8173-power.h>
#define SPM_VDE_PWR_CON 0x0210
@@ -34,6 +32,7 @@
#define SPM_MFG_2D_PWR_CON 0x02c0
#define SPM_MFG_ASYNC_PWR_CON 0x02c4
#define SPM_USB_PWR_CON 0x02cc
+
#define SPM_PWR_STATUS 0x060c
#define SPM_PWR_STATUS_2ND 0x0610
@@ -55,12 +54,21 @@
#define PWR_STATUS_USB BIT(25)
enum clk_id {
- MT8173_CLK_NONE,
- MT8173_CLK_MM,
- MT8173_CLK_MFG,
- MT8173_CLK_VENC,
- MT8173_CLK_VENC_LT,
- MT8173_CLK_MAX,
+ CLK_NONE,
+ CLK_MM,
+ CLK_MFG,
+ CLK_VENC,
+ CLK_VENC_LT,
+ CLK_MAX,
+};
+
+static const char * const clk_names[] = {
+ NULL,
+ "mm",
+ "mfg",
+ "venc",
+ "venc_lt",
+ NULL,
};
#define MAX_CLKS 2
@@ -76,98 +84,6 @@ struct scp_domain_data {
bool active_wakeup;
};
-static const struct scp_domain_data scp_domain_data[] = {
- [MT8173_POWER_DOMAIN_VDEC] = {
- .name = "vdec",
- .sta_mask = PWR_STATUS_VDEC,
- .ctl_offs = SPM_VDE_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(12, 12),
- .clk_id = {MT8173_CLK_MM},
- },
- [MT8173_POWER_DOMAIN_VENC] = {
- .name = "venc",
- .sta_mask = PWR_STATUS_VENC,
- .ctl_offs = SPM_VEN_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC},
- },
- [MT8173_POWER_DOMAIN_ISP] = {
- .name = "isp",
- .sta_mask = PWR_STATUS_ISP,
- .ctl_offs = SPM_ISP_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(13, 12),
- .clk_id = {MT8173_CLK_MM},
- },
- [MT8173_POWER_DOMAIN_MM] = {
- .name = "mm",
- .sta_mask = PWR_STATUS_DISP,
- .ctl_offs = SPM_DIS_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(12, 12),
- .clk_id = {MT8173_CLK_MM},
- .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
- MT8173_TOP_AXI_PROT_EN_MM_M1,
- },
- [MT8173_POWER_DOMAIN_VENC_LT] = {
- .name = "venc_lt",
- .sta_mask = PWR_STATUS_VENC_LT,
- .ctl_offs = SPM_VEN2_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = {MT8173_CLK_MM, MT8173_CLK_VENC_LT},
- },
- [MT8173_POWER_DOMAIN_AUDIO] = {
- .name = "audio",
- .sta_mask = PWR_STATUS_AUDIO,
- .ctl_offs = SPM_AUDIO_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = {MT8173_CLK_NONE},
- },
- [MT8173_POWER_DOMAIN_USB] = {
- .name = "usb",
- .sta_mask = PWR_STATUS_USB,
- .ctl_offs = SPM_USB_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(15, 12),
- .clk_id = {MT8173_CLK_NONE},
- .active_wakeup = true,
- },
- [MT8173_POWER_DOMAIN_MFG_ASYNC] = {
- .name = "mfg_async",
- .sta_mask = PWR_STATUS_MFG_ASYNC,
- .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = 0,
- .clk_id = {MT8173_CLK_MFG},
- },
- [MT8173_POWER_DOMAIN_MFG_2D] = {
- .name = "mfg_2d",
- .sta_mask = PWR_STATUS_MFG_2D,
- .ctl_offs = SPM_MFG_2D_PWR_CON,
- .sram_pdn_bits = GENMASK(11, 8),
- .sram_pdn_ack_bits = GENMASK(13, 12),
- .clk_id = {MT8173_CLK_NONE},
- },
- [MT8173_POWER_DOMAIN_MFG] = {
- .name = "mfg",
- .sta_mask = PWR_STATUS_MFG,
- .ctl_offs = SPM_MFG_PWR_CON,
- .sram_pdn_bits = GENMASK(13, 8),
- .sram_pdn_ack_bits = GENMASK(21, 16),
- .clk_id = {MT8173_CLK_NONE},
- .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
- MT8173_TOP_AXI_PROT_EN_MFG_M0 |
- MT8173_TOP_AXI_PROT_EN_MFG_M1 |
- MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
- },
-};
-
-#define NUM_DOMAINS ARRAY_SIZE(scp_domain_data)
-
struct scp;
struct scp_domain {
@@ -179,7 +95,7 @@ struct scp_domain {
};
struct scp {
- struct scp_domain domains[NUM_DOMAINS];
+ struct scp_domain *domains;
struct genpd_onecell_data pd_data;
struct device *dev;
void __iomem *base;
@@ -408,57 +324,55 @@ static bool scpsys_active_wakeup(struct device *dev)
return scpd->data->active_wakeup;
}
-static int scpsys_probe(struct platform_device *pdev)
+static void init_clks(struct platform_device *pdev, struct clk *clk[CLK_MAX])
+{
+ int i;
+
+ for (i = CLK_NONE + 1; i < CLK_MAX; i++)
+ clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
+}
+
+static struct scp *init_scp(struct platform_device *pdev,
+ const struct scp_domain_data *scp_domain_data, int num)
{
struct genpd_onecell_data *pd_data;
struct resource *res;
- int i, j, ret;
+ int i, j;
struct scp *scp;
- struct clk *clk[MT8173_CLK_MAX];
+ struct clk *clk[CLK_MAX];
scp = devm_kzalloc(&pdev->dev, sizeof(*scp), GFP_KERNEL);
if (!scp)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
scp->dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
scp->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(scp->base))
- return PTR_ERR(scp->base);
+ return ERR_CAST(scp->base);
+
+ scp->domains = devm_kzalloc(&pdev->dev,
+ sizeof(*scp->domains) * num, GFP_KERNEL);
+ if (!scp->domains)
+ return ERR_PTR(-ENOMEM);
pd_data = &scp->pd_data;
pd_data->domains = devm_kzalloc(&pdev->dev,
- sizeof(*pd_data->domains) * NUM_DOMAINS, GFP_KERNEL);
+ sizeof(*pd_data->domains) * num, GFP_KERNEL);
if (!pd_data->domains)
- return -ENOMEM;
-
- clk[MT8173_CLK_MM] = devm_clk_get(&pdev->dev, "mm");
- if (IS_ERR(clk[MT8173_CLK_MM]))
- return PTR_ERR(clk[MT8173_CLK_MM]);
-
- clk[MT8173_CLK_MFG] = devm_clk_get(&pdev->dev, "mfg");
- if (IS_ERR(clk[MT8173_CLK_MFG]))
- return PTR_ERR(clk[MT8173_CLK_MFG]);
-
- clk[MT8173_CLK_VENC] = devm_clk_get(&pdev->dev, "venc");
- if (IS_ERR(clk[MT8173_CLK_VENC]))
- return PTR_ERR(clk[MT8173_CLK_VENC]);
-
- clk[MT8173_CLK_VENC_LT] = devm_clk_get(&pdev->dev, "venc_lt");
- if (IS_ERR(clk[MT8173_CLK_VENC_LT]))
- return PTR_ERR(clk[MT8173_CLK_VENC_LT]);
+ return ERR_PTR(-ENOMEM);
scp->infracfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
"infracfg");
if (IS_ERR(scp->infracfg)) {
dev_err(&pdev->dev, "Cannot find infracfg controller: %ld\n",
PTR_ERR(scp->infracfg));
- return PTR_ERR(scp->infracfg);
+ return ERR_CAST(scp->infracfg);
}
- for (i = 0; i < NUM_DOMAINS; i++) {
+ for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
const struct scp_domain_data *data = &scp_domain_data[i];
@@ -467,13 +381,15 @@ static int scpsys_probe(struct platform_device *pdev)
if (PTR_ERR(scpd->supply) == -ENODEV)
scpd->supply = NULL;
else
- return PTR_ERR(scpd->supply);
+ return ERR_CAST(scpd->supply);
}
}
- pd_data->num_domains = NUM_DOMAINS;
+ pd_data->num_domains = num;
- for (i = 0; i < NUM_DOMAINS; i++) {
+ init_clks(pdev, clk);
+
+ for (i = 0; i < num; i++) {
struct scp_domain *scpd = &scp->domains[i];
struct generic_pm_domain *genpd = &scpd->genpd;
const struct scp_domain_data *data = &scp_domain_data[i];
@@ -482,13 +398,37 @@ static int scpsys_probe(struct platform_device *pdev)
scpd->scp = scp;
scpd->data = data;
- for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++)
- scpd->clk[j] = clk[data->clk_id[j]];
+
+ for (j = 0; j < MAX_CLKS && data->clk_id[j]; j++) {
+ struct clk *c = clk[data->clk_id[j]];
+
+ if (IS_ERR(c)) {
+ dev_err(&pdev->dev, "%s: clk unavailable\n",
+ data->name);
+ return ERR_CAST(c);
+ }
+
+ scpd->clk[j] = c;
+ }
genpd->name = data->name;
genpd->power_off = scpsys_power_off;
genpd->power_on = scpsys_power_on;
genpd->dev_ops.active_wakeup = scpsys_active_wakeup;
+ }
+
+ return scp;
+}
+
+static void mtk_register_power_domains(struct platform_device *pdev,
+ struct scp *scp, int num)
+{
+ struct genpd_onecell_data *pd_data;
+ int i, ret;
+
+ for (i = 0; i < num; i++) {
+ struct scp_domain *scpd = &scp->domains[i];
+ struct generic_pm_domain *genpd = &scpd->genpd;
/*
* Initially turn on all domains to make the domains usable
@@ -507,6 +447,123 @@ static int scpsys_probe(struct platform_device *pdev)
* valid.
*/
+ pd_data = &scp->pd_data;
+
+ ret = of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to add OF provider: %d\n", ret);
+}
+
+/*
+ * MT8173 power domain support
+ */
+
+static const struct scp_domain_data scp_domain_data_mt8173[] = {
+ [MT8173_POWER_DOMAIN_VDEC] = {
+ .name = "vdec",
+ .sta_mask = PWR_STATUS_VDEC,
+ .ctl_offs = SPM_VDE_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .clk_id = {CLK_MM},
+ },
+ [MT8173_POWER_DOMAIN_VENC] = {
+ .name = "venc",
+ .sta_mask = PWR_STATUS_VENC,
+ .ctl_offs = SPM_VEN_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .clk_id = {CLK_MM, CLK_VENC},
+ },
+ [MT8173_POWER_DOMAIN_ISP] = {
+ .name = "isp",
+ .sta_mask = PWR_STATUS_ISP,
+ .ctl_offs = SPM_ISP_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .clk_id = {CLK_MM},
+ },
+ [MT8173_POWER_DOMAIN_MM] = {
+ .name = "mm",
+ .sta_mask = PWR_STATUS_DISP,
+ .ctl_offs = SPM_DIS_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .clk_id = {CLK_MM},
+ .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MM_M0 |
+ MT8173_TOP_AXI_PROT_EN_MM_M1,
+ },
+ [MT8173_POWER_DOMAIN_VENC_LT] = {
+ .name = "venc_lt",
+ .sta_mask = PWR_STATUS_VENC_LT,
+ .ctl_offs = SPM_VEN2_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .clk_id = {CLK_MM, CLK_VENC_LT},
+ },
+ [MT8173_POWER_DOMAIN_AUDIO] = {
+ .name = "audio",
+ .sta_mask = PWR_STATUS_AUDIO,
+ .ctl_offs = SPM_AUDIO_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .clk_id = {CLK_NONE},
+ },
+ [MT8173_POWER_DOMAIN_USB] = {
+ .name = "usb",
+ .sta_mask = PWR_STATUS_USB,
+ .ctl_offs = SPM_USB_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .clk_id = {CLK_NONE},
+ .active_wakeup = true,
+ },
+ [MT8173_POWER_DOMAIN_MFG_ASYNC] = {
+ .name = "mfg_async",
+ .sta_mask = PWR_STATUS_MFG_ASYNC,
+ .ctl_offs = SPM_MFG_ASYNC_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = 0,
+ .clk_id = {CLK_MFG},
+ },
+ [MT8173_POWER_DOMAIN_MFG_2D] = {
+ .name = "mfg_2d",
+ .sta_mask = PWR_STATUS_MFG_2D,
+ .ctl_offs = SPM_MFG_2D_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .clk_id = {CLK_NONE},
+ },
+ [MT8173_POWER_DOMAIN_MFG] = {
+ .name = "mfg",
+ .sta_mask = PWR_STATUS_MFG,
+ .ctl_offs = SPM_MFG_PWR_CON,
+ .sram_pdn_bits = GENMASK(13, 8),
+ .sram_pdn_ack_bits = GENMASK(21, 16),
+ .clk_id = {CLK_NONE},
+ .bus_prot_mask = MT8173_TOP_AXI_PROT_EN_MFG_S |
+ MT8173_TOP_AXI_PROT_EN_MFG_M0 |
+ MT8173_TOP_AXI_PROT_EN_MFG_M1 |
+ MT8173_TOP_AXI_PROT_EN_MFG_SNOOP_OUT,
+ },
+};
+
+#define NUM_DOMAINS_MT8173 ARRAY_SIZE(scp_domain_data_mt8173)
+
+static int __init scpsys_probe_mt8173(struct platform_device *pdev)
+{
+ struct scp *scp;
+ struct genpd_onecell_data *pd_data;
+ int ret;
+
+ scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173);
+ if (IS_ERR(scp))
+ return PTR_ERR(scp);
+
+ mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT8173);
+
+ pd_data = &scp->pd_data;
+
ret = pm_genpd_add_subdomain(pd_data->domains[MT8173_POWER_DOMAIN_MFG_ASYNC],
pd_data->domains[MT8173_POWER_DOMAIN_MFG_2D]);
if (ret && IS_ENABLED(CONFIG_PM))
@@ -517,21 +574,36 @@ static int scpsys_probe(struct platform_device *pdev)
if (ret && IS_ENABLED(CONFIG_PM))
dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
- ret = of_genpd_add_provider_onecell(pdev->dev.of_node, pd_data);
- if (ret)
- dev_err(&pdev->dev, "Failed to add OF provider: %d\n", ret);
-
return 0;
}
+/*
+ * scpsys driver init
+ */
+
static const struct of_device_id of_scpsys_match_tbl[] = {
{
.compatible = "mediatek,mt8173-scpsys",
+ .data = scpsys_probe_mt8173,
}, {
/* sentinel */
}
};
+static int scpsys_probe(struct platform_device *pdev)
+{
+ int (*probe)(struct platform_device *);
+ const struct of_device_id *of_id;
+
+ of_id = of_match_node(of_scpsys_match_tbl, pdev->dev.of_node);
+ if (!of_id || !of_id->data)
+ return -EINVAL;
+
+ probe = of_id->data;
+
+ return probe(pdev);
+}
+
static struct platform_driver scpsys_drv = {
.probe = scpsys_probe,
.driver = {
--
1.9.1
From: Shunli Wang <[email protected]>
Add scpsys driver for MT2701.
mtk-scpsys now supports MT8173 (arm64) and MT2701 (arm). So it should
be enabled on both arm64 and arm platforms.
Signed-off-by: Shunli Wang <[email protected]>
Signed-off-by: James Liao <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
---
drivers/soc/mediatek/Kconfig | 2 +-
drivers/soc/mediatek/mtk-scpsys.c | 117 +++++++++++++++++++++++++++++++++++++-
2 files changed, 117 insertions(+), 2 deletions(-)
diff --git a/drivers/soc/mediatek/Kconfig b/drivers/soc/mediatek/Kconfig
index 0a4ea80..609bb34 100644
--- a/drivers/soc/mediatek/Kconfig
+++ b/drivers/soc/mediatek/Kconfig
@@ -23,7 +23,7 @@ config MTK_PMIC_WRAP
config MTK_SCPSYS
bool "MediaTek SCPSYS Support"
depends on ARCH_MEDIATEK || COMPILE_TEST
- default ARM64 && ARCH_MEDIATEK
+ default ARCH_MEDIATEK
select REGMAP
select MTK_INFRACFG
select PM_GENERIC_DOMAINS if PM
diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
index dd7a07d..4a1c636 100644
--- a/drivers/soc/mediatek/mtk-scpsys.c
+++ b/drivers/soc/mediatek/mtk-scpsys.c
@@ -20,6 +20,7 @@
#include <linux/regulator/consumer.h>
#include <linux/soc/mediatek/infracfg.h>
+#include <dt-bindings/power/mt2701-power.h>
#include <dt-bindings/power/mt8173-power.h>
#define SPM_VDE_PWR_CON 0x0210
@@ -27,8 +28,13 @@
#define SPM_VEN_PWR_CON 0x0230
#define SPM_ISP_PWR_CON 0x0238
#define SPM_DIS_PWR_CON 0x023c
+#define SPM_CONN_PWR_CON 0x0280
#define SPM_VEN2_PWR_CON 0x0298
-#define SPM_AUDIO_PWR_CON 0x029c
+#define SPM_AUDIO_PWR_CON 0x029c /* MT8173 */
+#define SPM_BDP_PWR_CON 0x029c /* MT2701 */
+#define SPM_ETH_PWR_CON 0x02a0
+#define SPM_HIF_PWR_CON 0x02a4
+#define SPM_IFR_MSC_PWR_CON 0x02a8
#define SPM_MFG_2D_PWR_CON 0x02c0
#define SPM_MFG_ASYNC_PWR_CON 0x02c4
#define SPM_USB_PWR_CON 0x02cc
@@ -42,10 +48,15 @@
#define PWR_ON_2ND_BIT BIT(3)
#define PWR_CLK_DIS_BIT BIT(4)
+#define PWR_STATUS_CONN BIT(1)
#define PWR_STATUS_DISP BIT(3)
#define PWR_STATUS_MFG BIT(4)
#define PWR_STATUS_ISP BIT(5)
#define PWR_STATUS_VDEC BIT(7)
+#define PWR_STATUS_BDP BIT(14)
+#define PWR_STATUS_ETH BIT(15)
+#define PWR_STATUS_HIF BIT(16)
+#define PWR_STATUS_IFR_MSC BIT(17)
#define PWR_STATUS_VENC_LT BIT(20)
#define PWR_STATUS_VENC BIT(21)
#define PWR_STATUS_MFG_2D BIT(22)
@@ -59,6 +70,7 @@ enum clk_id {
CLK_MFG,
CLK_VENC,
CLK_VENC_LT,
+ CLK_ETHIF,
CLK_MAX,
};
@@ -68,6 +80,7 @@ enum clk_id {
"mfg",
"venc",
"venc_lt",
+ "ethif",
NULL,
};
@@ -455,6 +468,105 @@ static void mtk_register_power_domains(struct platform_device *pdev,
}
/*
+ * MT2701 power domain support
+ */
+
+static const struct scp_domain_data scp_domain_data_mt2701[] = {
+ [MT2701_POWER_DOMAIN_CONN] = {
+ .name = "conn",
+ .sta_mask = PWR_STATUS_CONN,
+ .ctl_offs = SPM_CONN_PWR_CON,
+ .bus_prot_mask = 0x0104,
+ .clk_id = {CLK_NONE},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_DISP] = {
+ .name = "disp",
+ .sta_mask = PWR_STATUS_DISP,
+ .ctl_offs = SPM_DIS_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .clk_id = {CLK_MM},
+ .bus_prot_mask = 0x0002,
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_MFG] = {
+ .name = "mfg",
+ .sta_mask = PWR_STATUS_MFG,
+ .ctl_offs = SPM_MFG_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .clk_id = {CLK_MFG},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_VDEC] = {
+ .name = "vdec",
+ .sta_mask = PWR_STATUS_VDEC,
+ .ctl_offs = SPM_VDE_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(12, 12),
+ .clk_id = {CLK_MM},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_ISP] = {
+ .name = "isp",
+ .sta_mask = PWR_STATUS_ISP,
+ .ctl_offs = SPM_ISP_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(13, 12),
+ .clk_id = {CLK_MM},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_BDP] = {
+ .name = "bdp",
+ .sta_mask = PWR_STATUS_BDP,
+ .ctl_offs = SPM_BDP_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .clk_id = {CLK_NONE},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_ETH] = {
+ .name = "eth",
+ .sta_mask = PWR_STATUS_ETH,
+ .ctl_offs = SPM_ETH_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .clk_id = {CLK_ETHIF},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_HIF] = {
+ .name = "hif",
+ .sta_mask = PWR_STATUS_HIF,
+ .ctl_offs = SPM_HIF_PWR_CON,
+ .sram_pdn_bits = GENMASK(11, 8),
+ .sram_pdn_ack_bits = GENMASK(15, 12),
+ .clk_id = {CLK_ETHIF},
+ .active_wakeup = true,
+ },
+ [MT2701_POWER_DOMAIN_IFR_MSC] = {
+ .name = "ifr_msc",
+ .sta_mask = PWR_STATUS_IFR_MSC,
+ .ctl_offs = SPM_IFR_MSC_PWR_CON,
+ .clk_id = {CLK_NONE},
+ .active_wakeup = true,
+ },
+};
+
+#define NUM_DOMAINS_MT2701 ARRAY_SIZE(scp_domain_data_mt2701)
+
+static int __init scpsys_probe_mt2701(struct platform_device *pdev)
+{
+ struct scp *scp;
+
+ scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701);
+ if (IS_ERR(scp))
+ return PTR_ERR(scp);
+
+ mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT2701);
+
+ return 0;
+}
+
+/*
* MT8173 power domain support
*/
@@ -583,6 +695,9 @@ static int __init scpsys_probe_mt8173(struct platform_device *pdev)
static const struct of_device_id of_scpsys_match_tbl[] = {
{
+ .compatible = "mediatek,mt2701-scpsys",
+ .data = scpsys_probe_mt2701,
+ }, {
.compatible = "mediatek,mt8173-scpsys",
.data = scpsys_probe_mt8173,
}, {
--
1.9.1
From: Shunli Wang <[email protected]>
Add power dt-bindings for MT2701.
Signed-off-by: Shunli Wang <[email protected]>
Signed-off-by: James Liao <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
---
.../devicetree/bindings/soc/mediatek/scpsys.txt | 13 +++++++----
include/dt-bindings/power/mt2701-power.h | 27 ++++++++++++++++++++++
2 files changed, 35 insertions(+), 5 deletions(-)
create mode 100644 include/dt-bindings/power/mt2701-power.h
diff --git a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
index e8f15e3..16fe94d 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@@ -9,17 +9,20 @@ domain control.
The driver implements the Generic PM domain bindings described in
power/power_domain.txt. It provides the power domains defined in
-include/dt-bindings/power/mt8173-power.h.
+include/dt-bindings/power/mt8173-power.h and mt2701-power.h.
Required properties:
-- compatible: Must be "mediatek,mt8173-scpsys"
+- compatible: Should be one of:
+ - "mediatek,mt2701-scpsys"
+ - "mediatek,mt8173-scpsys"
- #power-domain-cells: Must be 1
- reg: Address range of the SCPSYS unit
- infracfg: must contain a phandle to the infracfg controller
- clock, clock-names: clocks according to the common clock binding.
- The clocks needed "mm", "mfg", "venc" and "venc_lt".
- These are the clocks which hardware needs to be enabled
- before enabling certain power domains.
+ These are clocks which hardware needs to be
+ enabled before enabling certain power domains.
+ Required clocks for MT2701: "mm", "mfg", "ethif"
+ Required clocks for MT8173: "mm", "mfg", "venc", "venc_lt"
Optional properties:
- vdec-supply: Power supply for the vdec power domain
diff --git a/include/dt-bindings/power/mt2701-power.h b/include/dt-bindings/power/mt2701-power.h
new file mode 100644
index 0000000..64cc826
--- /dev/null
+++ b/include/dt-bindings/power/mt2701-power.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2015 MediaTek Inc.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT2701_POWER_H
+#define _DT_BINDINGS_POWER_MT2701_POWER_H
+
+#define MT2701_POWER_DOMAIN_CONN 0
+#define MT2701_POWER_DOMAIN_DISP 1
+#define MT2701_POWER_DOMAIN_MFG 2
+#define MT2701_POWER_DOMAIN_VDEC 3
+#define MT2701_POWER_DOMAIN_ISP 4
+#define MT2701_POWER_DOMAIN_BDP 5
+#define MT2701_POWER_DOMAIN_ETH 6
+#define MT2701_POWER_DOMAIN_HIF 7
+#define MT2701_POWER_DOMAIN_IFR_MSC 8
+
+#endif /* _DT_BINDINGS_POWER_MT2701_POWER_H */
--
1.9.1
Hi James,
On 10/20/2016 10:56 AM, James Liao wrote:
> -static int scpsys_probe(struct platform_device *pdev)
> +static void init_clks(struct platform_device *pdev, struct clk *clk[CLK_MAX])
I prefer struct clk **clk.
> +{
> + int i;
> +
> + for (i = CLK_NONE + 1; i < CLK_MAX; i++)
> + clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
> +}
> +
> +static struct scp *init_scp(struct platform_device *pdev,
> + const struct scp_domain_data *scp_domain_data, int num)
> {
> struct genpd_onecell_data *pd_data;
> struct resource *res;
> - int i, j, ret;
> + int i, j;
> struct scp *scp;
> - struct clk *clk[MT8173_CLK_MAX];
> + struct clk *clk[CLK_MAX];
should be *[CLK_MAX - 1] but I would prefer to define in the enum:
CLK_MAX = CLK_VENC_LT,
If you are ok with it, I can fix both of my comments when applying.
Regards,
Matthias
Hi Matthias,
Sorry for late reply due to our email service.
On Tue, 2016-10-25 at 16:04 +0200, Matthias Brugger wrote:
> Hi James,
>
> On 10/20/2016 10:56 AM, James Liao wrote:
> > -static int scpsys_probe(struct platform_device *pdev)
> > +static void init_clks(struct platform_device *pdev, struct clk *clk[CLK_MAX])
>
> I prefer struct clk **clk.
Okay.
> > +{
> > + int i;
> > +
> > + for (i = CLK_NONE + 1; i < CLK_MAX; i++)
> > + clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
> > +}
> > +
> > +static struct scp *init_scp(struct platform_device *pdev,
> > + const struct scp_domain_data *scp_domain_data, int num)
> > {
> > struct genpd_onecell_data *pd_data;
> > struct resource *res;
> > - int i, j, ret;
> > + int i, j;
> > struct scp *scp;
> > - struct clk *clk[MT8173_CLK_MAX];
> > + struct clk *clk[CLK_MAX];
>
> should be *[CLK_MAX - 1] but I would prefer to define in the enum:
> CLK_MAX = CLK_VENC_LT,
After init_clks() the clk[] will have valid contents between
clk[1]..clk[CLK_MAX-1], so it's necessary to declare clk[] with CLK_MAX
elements.
> If you are ok with it, I can fix both of my comments when applying.
Yes. struct clk **clk can be applied directly. But I think clk[CLK_MAX]
should be kept in current implementation.
Best regards,
James
On 10/28/2016 11:36 AM, James Liao wrote:
> Hi Matthias,
>
> Sorry for late reply due to our email service.
>
> On Tue, 2016-10-25 at 16:04 +0200, Matthias Brugger wrote:
>> Hi James,
>>
>> On 10/20/2016 10:56 AM, James Liao wrote:
>>> -static int scpsys_probe(struct platform_device *pdev)
>>> +static void init_clks(struct platform_device *pdev, struct clk *clk[CLK_MAX])
>>
>> I prefer struct clk **clk.
>
> Okay.
>
>>> +{
>>> + int i;
>>> +
>>> + for (i = CLK_NONE + 1; i < CLK_MAX; i++)
>>> + clk[i] = devm_clk_get(&pdev->dev, clk_names[i]);
>>> +}
>>> +
>>> +static struct scp *init_scp(struct platform_device *pdev,
>>> + const struct scp_domain_data *scp_domain_data, int num)
>>> {
>>> struct genpd_onecell_data *pd_data;
>>> struct resource *res;
>>> - int i, j, ret;
>>> + int i, j;
>>> struct scp *scp;
>>> - struct clk *clk[MT8173_CLK_MAX];
>>> + struct clk *clk[CLK_MAX];
>>
>> should be *[CLK_MAX - 1] but I would prefer to define in the enum:
>> CLK_MAX = CLK_VENC_LT,
>
> After init_clks() the clk[] will have valid contents between
> clk[1]..clk[CLK_MAX-1], so it's necessary to declare clk[] with CLK_MAX
> elements.
>
>> If you are ok with it, I can fix both of my comments when applying.
>
> Yes. struct clk **clk can be applied directly. But I think clk[CLK_MAX]
> should be kept in current implementation.
>
Ok, we won't never use clk[0] but it's ok for now.
Applied to v4.9-next/soc
>
> Best regards,
>
> James
>
>
On 10/20/2016 10:56 AM, James Liao wrote:
> From: Shunli Wang <[email protected]>
>
> Add scpsys driver for MT2701.
>
> mtk-scpsys now supports MT8173 (arm64) and MT2701 (arm). So it should
> be enabled on both arm64 and arm platforms.
>
> Signed-off-by: Shunli Wang <[email protected]>
> Signed-off-by: James Liao <[email protected]>
> Reviewed-by: Kevin Hilman <[email protected]>
> ---
Applied to v4.9-next/soc
On 10/20/2016 10:56 AM, James Liao wrote:
> From: Shunli Wang <[email protected]>
>
> Add power dt-bindings for MT2701.
>
> Signed-off-by: Shunli Wang <[email protected]>
> Signed-off-by: James Liao <[email protected]>
> Acked-by: Rob Herring <[email protected]>
> Reviewed-by: Kevin Hilman <[email protected]>
Applied to v4.9-next/soc
On 10/31/2016 12:57 AM, Matthias Brugger wrote:
>
>
> On 10/20/2016 10:56 AM, James Liao wrote:
>> From: Shunli Wang <[email protected]>
>>
>> Add power dt-bindings for MT2701.
>>
>> Signed-off-by: Shunli Wang <[email protected]>
>> Signed-off-by: James Liao <[email protected]>
>> Acked-by: Rob Herring <[email protected]>
>> Reviewed-by: Kevin Hilman <[email protected]>
>
> Applied to v4.9-next/soc
Of course this has to be applied to v4.9-next/dts, fixed now.
Thanks,
Matthias
Hi James,
On 10/20/2016 10:56 AM, James Liao wrote:
> Some power domain comsumers may init before module_init.
> So the power domain provider (scpsys) need to be initialized
> earlier too.
>
> Take an example for our IOMMU (M4U) and SMI. SMI is a bridge
> between IOMMU and multimedia HW. SMI is responsible to
> enable/disable iommu and help transfer data for each multimedia
> HW. Both of them have to wait until the power and clocks are
> enabled.
>
> So scpsys driver should be initialized before SMI, and SMI should
> be initialized before IOMMU, and then init IOMMU consumers
> (display/vdec/venc/camera etc.).
>
> IOMMU is subsys_init by default. So we need to init scpsys driver
> before subsys_init.
>
> Signed-off-by: James Liao <[email protected]>
> Reviewed-by: Kevin Hilman <[email protected]>
> ---
I didn't applied this patch for now.
I answered you in v7 of this series [1]. I would prefer to see if we can
fix that otherwise.
Would be great if you or Yong could provide some feedback.
Thanks,
Matthias
[1] https://patchwork.kernel.org/patch/9397405/
> drivers/soc/mediatek/mtk-scpsys.c | 19 ++++++++++++++++++-
> 1 file changed, 18 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> index fa9ee69..dd7a07d 100644
> --- a/drivers/soc/mediatek/mtk-scpsys.c
> +++ b/drivers/soc/mediatek/mtk-scpsys.c
> @@ -613,4 +613,21 @@ static int scpsys_probe(struct platform_device *pdev)
> .of_match_table = of_match_ptr(of_scpsys_match_tbl),
> },
> };
> -builtin_platform_driver(scpsys_drv);
> +
> +static int __init scpsys_drv_init(void)
> +{
> + return platform_driver_register(&scpsys_drv);
> +}
> +
> +/*
> + * There are some Mediatek drivers which depend on the power domain driver need
> + * to probe in earlier initcall levels. So scpsys driver also need to probe
> + * earlier.
> + *
> + * IOMMU(M4U) and SMI drivers for example. SMI is a bridge between IOMMU and
> + * multimedia HW. IOMMU depends on SMI, and SMI is a power domain consumer,
> + * so the proper probe sequence should be scpsys -> SMI -> IOMMU driver.
> + * IOMMU drivers are initialized during subsys_init by default, so we need to
> + * move SMI and scpsys drivers to subsys_init or earlier init levels.
> + */
> +subsys_initcall(scpsys_drv_init);
>
On Mon, 2016-10-31 at 01:08 +0100, Matthias Brugger wrote:
> Hi James,
>
> On 10/20/2016 10:56 AM, James Liao wrote:
> > Some power domain comsumers may init before module_init.
> > So the power domain provider (scpsys) need to be initialized
> > earlier too.
> >
> > Take an example for our IOMMU (M4U) and SMI. SMI is a bridge
> > between IOMMU and multimedia HW. SMI is responsible to
> > enable/disable iommu and help transfer data for each multimedia
> > HW. Both of them have to wait until the power and clocks are
> > enabled.
> >
> > So scpsys driver should be initialized before SMI, and SMI should
> > be initialized before IOMMU, and then init IOMMU consumers
> > (display/vdec/venc/camera etc.).
> >
> > IOMMU is subsys_init by default. So we need to init scpsys driver
> > before subsys_init.
> >
> > Signed-off-by: James Liao <[email protected]>
> > Reviewed-by: Kevin Hilman <[email protected]>
> > ---
>
> I didn't applied this patch for now.
> I answered you in v7 of this series [1]. I would prefer to see if we can
> fix that otherwise.
>
> Would be great if you or Yong could provide some feedback.
>
> Thanks,
> Matthias
>
> [1] https://patchwork.kernel.org/patch/9397405/
>
> > drivers/soc/mediatek/mtk-scpsys.c | 19 ++++++++++++++++++-
> > 1 file changed, 18 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > index fa9ee69..dd7a07d 100644
> > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > @@ -613,4 +613,21 @@ static int scpsys_probe(struct platform_device *pdev)
> > .of_match_table = of_match_ptr(of_scpsys_match_tbl),
> > },
> > };
> > -builtin_platform_driver(scpsys_drv);
> > +
> > +static int __init scpsys_drv_init(void)
> > +{
> > + return platform_driver_register(&scpsys_drv);
> > +}
> > +
> > +/*
> > + * There are some Mediatek drivers which depend on the power domain driver need
> > + * to probe in earlier initcall levels. So scpsys driver also need to probe
> > + * earlier.
> > + *
> > + * IOMMU(M4U) and SMI drivers for example. SMI is a bridge between IOMMU and
> > + * multimedia HW. IOMMU depends on SMI, and SMI is a power domain consumer,
> > + * so the proper probe sequence should be scpsys -> SMI -> IOMMU driver.
> > + * IOMMU drivers are initialized during subsys_init by default, so we need to
> > + * move SMI and scpsys drivers to subsys_init or earlier init levels.
> > + */
> > +subsys_initcall(scpsys_drv_init);
> >
Hi Matthias,
I got it, thanks.
Hi Yong,
Is this patch still needed on latest kernel for IOMMU driver? Or we have
other solutions for IOMMU driver init?
Best regards,
James
On Mon, 2016-10-31 at 10:08 +0800, James Liao wrote:
> On Mon, 2016-10-31 at 01:08 +0100, Matthias Brugger wrote:
> > Hi James,
> >
> > On 10/20/2016 10:56 AM, James Liao wrote:
> > > Some power domain comsumers may init before module_init.
> > > So the power domain provider (scpsys) need to be initialized
> > > earlier too.
> > >
> > > Take an example for our IOMMU (M4U) and SMI. SMI is a bridge
> > > between IOMMU and multimedia HW. SMI is responsible to
> > > enable/disable iommu and help transfer data for each multimedia
> > > HW. Both of them have to wait until the power and clocks are
> > > enabled.
> > >
> > > So scpsys driver should be initialized before SMI, and SMI should
> > > be initialized before IOMMU, and then init IOMMU consumers
> > > (display/vdec/venc/camera etc.).
> > >
> > > IOMMU is subsys_init by default. So we need to init scpsys driver
> > > before subsys_init.
> > >
> > > Signed-off-by: James Liao <[email protected]>
> > > Reviewed-by: Kevin Hilman <[email protected]>
> > > ---
> >
> > I didn't applied this patch for now.
> > I answered you in v7 of this series [1]. I would prefer to see if we can
> > fix that otherwise.
> >
> > Would be great if you or Yong could provide some feedback.
> >
Hi, Matthias,
Yong had verified your propose and it seems didn't work[1].
But I'm looking at the recently merged device link patches[2], it maybe
could help with the probe sequence issue.
If we set the iommu client as the smi larb's device consumer of
device_link with the DL_DEV_PROBING flags, it will be wait for smi
larb's probe done. But I'm not test that solution yet, need to do a bit
more test to verify this.
thanks.
[1]
https://lists.linuxfoundation.org/pipermail/iommu/2016-July/018034.html
[2]https://www.mail-archive.com/[email protected]/msg1261311.html
> > Thanks,
> > Matthias
> >
> > [1] https://patchwork.kernel.org/patch/9397405/
> >
> > > drivers/soc/mediatek/mtk-scpsys.c | 19 ++++++++++++++++++-
> > > 1 file changed, 18 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/soc/mediatek/mtk-scpsys.c b/drivers/soc/mediatek/mtk-scpsys.c
> > > index fa9ee69..dd7a07d 100644
> > > --- a/drivers/soc/mediatek/mtk-scpsys.c
> > > +++ b/drivers/soc/mediatek/mtk-scpsys.c
> > > @@ -613,4 +613,21 @@ static int scpsys_probe(struct platform_device *pdev)
> > > .of_match_table = of_match_ptr(of_scpsys_match_tbl),
> > > },
> _______________________________________________
> Linux-mediatek mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-mediatek