This patch series removes some code in omap_hsmmc.c
and hsmmc.c and members from hsmmc.h and
hsmmc-omap.h which are not used anymore post
conversion to device-tree.
Patch 2 depends on Patch 1
Faiz Abbas (2):
ARM: OMAP2+: hsmmc.c: Remove dead code
mmc: host: omap_hsmmc: remove unused platform callbacks
arch/arm/mach-omap2/hsmmc.c | 239 +------------------------------
arch/arm/mach-omap2/hsmmc.h | 9 --
drivers/mmc/host/omap_hsmmc.c | 11 --
include/linux/platform_data/hsmmc-omap.h | 10 --
4 files changed, 2 insertions(+), 267 deletions(-)
--
2.7.4
Remove unused callbacks in the omap_hsmmc_platform_data structure
Signed-off-by: Faiz Abbas <[email protected]>
---
drivers/mmc/host/omap_hsmmc.c | 11 -----------
include/linux/platform_data/hsmmc-omap.h | 10 ----------
2 files changed, 21 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 7c12f37..04ff3c9 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -356,9 +356,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
struct mmc_host *mmc = host->mmc;
int ret = 0;
- if (mmc_pdata(host)->set_power)
- return mmc_pdata(host)->set_power(host->dev, power_on, vdd);
-
/*
* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
@@ -366,9 +363,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
if (IS_ERR(mmc->supply.vmmc))
return 0;
- if (mmc_pdata(host)->before_set_reg)
- mmc_pdata(host)->before_set_reg(host->dev, power_on, vdd);
-
ret = omap_hsmmc_set_pbias(host, false, 0);
if (ret)
return ret;
@@ -400,9 +394,6 @@ static int omap_hsmmc_set_power(struct omap_hsmmc_host *host, int power_on,
return ret;
}
- if (mmc_pdata(host)->after_set_reg)
- mmc_pdata(host)->after_set_reg(host->dev, power_on, vdd);
-
return 0;
err_set_voltage:
@@ -469,8 +460,6 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
int ret;
struct mmc_host *mmc = host->mmc;
- if (mmc_pdata(host)->set_power)
- return 0;
ret = mmc_regulator_get_supply(mmc);
if (ret == -EPROBE_DEFER)
diff --git a/include/linux/platform_data/hsmmc-omap.h b/include/linux/platform_data/hsmmc-omap.h
index 8e981be..0ff1e0d 100644
--- a/include/linux/platform_data/hsmmc-omap.h
+++ b/include/linux/platform_data/hsmmc-omap.h
@@ -55,9 +55,6 @@ struct omap_hsmmc_platform_data {
u32 caps; /* Used for the MMC driver on 2430 and later */
u32 pm_caps; /* PM capabilities of the mmc */
- /* use the internal clock */
- unsigned internal_clock:1;
-
/* nonremovable e.g. eMMC */
unsigned nonremovable:1;
@@ -73,13 +70,6 @@ struct omap_hsmmc_platform_data {
int gpio_cd; /* gpio (card detect) */
int gpio_cod; /* gpio (cover detect) */
int gpio_wp; /* gpio (write protect) */
-
- int (*set_power)(struct device *dev, int power_on, int vdd);
- void (*remux)(struct device *dev, int power_on);
- /* Call back before enabling / disabling regulators */
- void (*before_set_reg)(struct device *dev, int power_on, int vdd);
- /* Call back after enabling / disabling regulators */
- void (*after_set_reg)(struct device *dev, int power_on, int vdd);
/* if we have special card, init it using this callback */
void (*init_card)(struct mmc_card *card);
--
2.7.4
Most platforms using OMAP hsmmc driver have switched to device tree
for passing platform data to omap_hsmmc.c driver.
The hsmmc.c file in mach-omap2 exists only to support pandora board
which uses wl1251 driver in legacy platform data mode.
Hence, remove the dead code not used by the pandora board.
Signed-off-by: Faiz Abbas <[email protected]>
---
This is only compile tested. Someone with a pandora board should help
test this for functionality.
arch/arm/mach-omap2/hsmmc.c | 239 +-------------------------------------------
arch/arm/mach-omap2/hsmmc.h | 9 --
2 files changed, 2 insertions(+), 246 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index be517b0..5b61438 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -32,120 +32,6 @@ static u16 control_devconf1_offset;
#define HSMMC_NAME_LEN 9
-static void omap_hsmmc1_before_set_reg(struct device *dev,
- int power_on, int vdd)
-{
- u32 reg, prog_io;
- struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
- if (mmc->remux)
- mmc->remux(dev, power_on);
-
- /*
- * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card with Vcc regulator (from twl4030 or whatever). OMAP has both
- * 1.8V and 3.0V modes, controlled by the PBIAS register.
- *
- * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
- * is most naturally TWL VSIM; those pins also use PBIAS.
- *
- * FIXME handle VMMC1A as needed ...
- */
- if (power_on) {
- if (cpu_is_omap2430()) {
- reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
- if ((1 << vdd) >= MMC_VDD_30_31)
- reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
- else
- reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
- omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
- }
-
- if (mmc->internal_clock) {
- reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
- reg |= OMAP2_MMCSDIO1ADPCLKISEL;
- omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
- }
-
- reg = omap_ctrl_readl(control_pbias_offset);
- if (cpu_is_omap3630()) {
- /* Set MMC I/O to 52MHz */
- prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
- prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
- omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
- } else {
- reg |= OMAP2_PBIASSPEEDCTRL0;
- }
- reg &= ~OMAP2_PBIASLITEPWRDNZ0;
- omap_ctrl_writel(reg, control_pbias_offset);
- } else {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg &= ~OMAP2_PBIASLITEPWRDNZ0;
- omap_ctrl_writel(reg, control_pbias_offset);
- }
-}
-
-static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
-{
- u32 reg;
-
- /* 100ms delay required for PBIAS configuration */
- msleep(100);
-
- if (power_on) {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
- if ((1 << vdd) <= MMC_VDD_165_195)
- reg &= ~OMAP2_PBIASLITEVMODE0;
- else
- reg |= OMAP2_PBIASLITEVMODE0;
- omap_ctrl_writel(reg, control_pbias_offset);
- } else {
- reg = omap_ctrl_readl(control_pbias_offset);
- reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
- OMAP2_PBIASLITEVMODE0);
- omap_ctrl_writel(reg, control_pbias_offset);
- }
-}
-
-static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
-{
- u32 reg;
-
- reg = omap_ctrl_readl(control_devconf1_offset);
- if (mmc->internal_clock)
- reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- else
- reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
-}
-
-static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
-{
- struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
- if (mmc->remux)
- mmc->remux(dev, power_on);
-
- if (power_on)
- hsmmc2_select_input_clk_src(mmc);
-}
-
-static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
-{
- struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
- if (power_on)
- hsmmc2_select_input_clk_src(mmc);
-
- return 0;
-}
-
-static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
-{
- return 0;
-}
-
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
struct omap_hsmmc_platform_data *mmc)
{
@@ -157,101 +43,11 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
return -ENOMEM;
}
- if (c->name)
- strncpy(hc_name, c->name, HSMMC_NAME_LEN);
- else
- snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
- c->mmc, 1);
+ snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1);
mmc->name = hc_name;
mmc->caps = c->caps;
- mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
- if (c->cover_only) {
- /* detect if mobile phone cover removed */
- mmc->gpio_cd = -EINVAL;
- mmc->gpio_cod = c->gpio_cd;
- } else {
- /* card detect pin on the mmc socket itself */
- mmc->gpio_cd = c->gpio_cd;
- mmc->gpio_cod = -EINVAL;
- }
- mmc->gpio_wp = c->gpio_wp;
-
- mmc->remux = c->remux;
- mmc->init_card = c->init_card;
-
- if (c->nonremovable)
- mmc->nonremovable = 1;
-
- /*
- * NOTE: MMC slots should have a Vcc regulator set up.
- * This may be from a TWL4030-family chip, another
- * controllable regulator, or a fixed supply.
- *
- * temporary HACK: ocr_mask instead of fixed supply
- */
- if (soc_is_am35xx())
- mmc->ocr_mask = MMC_VDD_165_195 |
- MMC_VDD_26_27 |
- MMC_VDD_27_28 |
- MMC_VDD_29_30 |
- MMC_VDD_30_31 |
- MMC_VDD_31_32;
- else
- mmc->ocr_mask = c->ocr_mask;
-
- if (!soc_is_am35xx())
- mmc->features |= HSMMC_HAS_PBIAS;
-
- switch (c->mmc) {
- case 1:
- if (mmc->features & HSMMC_HAS_PBIAS) {
- /* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->before_set_reg =
- omap_hsmmc1_before_set_reg;
- mmc->after_set_reg =
- omap_hsmmc1_after_set_reg;
- }
-
- if (soc_is_am35xx())
- mmc->set_power = nop_mmc_set_power;
-
- /* OMAP3630 HSMMC1 supports only 4-bit */
- if (cpu_is_omap3630() &&
- (c->caps & MMC_CAP_8_BIT_DATA)) {
- c->caps &= ~MMC_CAP_8_BIT_DATA;
- c->caps |= MMC_CAP_4_BIT_DATA;
- mmc->caps = c->caps;
- }
- break;
- case 2:
- if (soc_is_am35xx())
- mmc->set_power = am35x_hsmmc2_set_power;
-
- if (c->ext_clock)
- c->transceiver = 1;
- if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
- c->caps &= ~MMC_CAP_8_BIT_DATA;
- c->caps |= MMC_CAP_4_BIT_DATA;
- }
- if (mmc->features & HSMMC_HAS_PBIAS) {
- /* off-chip level shifting, or none */
- mmc->before_set_reg = hsmmc2_before_set_reg;
- mmc->after_set_reg = NULL;
- }
- break;
- case 3:
- case 4:
- case 5:
- mmc->before_set_reg = NULL;
- mmc->after_set_reg = NULL;
- break;
- default:
- pr_err("MMC%d configuration not supported!\n", c->mmc);
- kfree(hc_name);
- return -ENODEV;
- }
return 0;
}
@@ -260,7 +56,6 @@ static int omap_hsmmc_done;
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
- struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
@@ -269,32 +64,12 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
omap_hsmmc_done++;
for (; c->mmc; c++) {
- if (!c->deferred)
- continue;
-
pdev = c->pdev;
if (!pdev)
continue;
-
- mmc_pdata = pdev->dev.platform_data;
- if (!mmc_pdata)
- continue;
-
- if (c->cover_only) {
- /* detect if mobile phone cover removed */
- mmc_pdata->gpio_cd = -EINVAL;
- mmc_pdata->gpio_cod = c->gpio_cd;
- } else {
- /* card detect pin on the mmc socket itself */
- mmc_pdata->gpio_cd = c->gpio_cd;
- mmc_pdata->gpio_cod = -EINVAL;
- }
- mmc_pdata->gpio_wp = c->gpio_wp;
-
res = omap_device_register(pdev);
if (res)
- pr_err("Could not late init MMC %s\n",
- c->name);
+ pr_err("Could not late init MMC\n");
}
}
@@ -336,13 +111,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
if (oh->dev_attr != NULL) {
mmc_dev_attr = oh->dev_attr;
mmc_data->controller_flags = mmc_dev_attr->flags;
- /*
- * erratum 2.1.1.128 doesn't apply if board has
- * a transceiver is attached
- */
- if (hsmmcinfo->transceiver)
- mmc_data->controller_flags &=
- ~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
}
pdev = platform_device_alloc(name, ctrl_nr - 1);
@@ -367,9 +135,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
hsmmcinfo->pdev = pdev;
- if (hsmmcinfo->deferred)
- goto free_mmc;
-
res = omap_device_register(pdev);
if (res) {
pr_err("Could not register od for %s\n", name);
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index 69b619d..af9af50 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,18 +12,9 @@ struct omap2_hsmmc_info {
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
- bool transceiver; /* MMC-2 option */
- bool ext_clock; /* use external pin for input clock */
- bool cover_only; /* No card detect - just cover switch */
- bool nonremovable; /* Nonremovable e.g. eMMC */
- bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
- char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
- int ocr_mask; /* temporary HACK */
- /* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
--
2.7.4
* Faiz Abbas <[email protected]> [170714 05:48]:
> This patch series removes some code in omap_hsmmc.c
> and hsmmc.c and members from hsmmc.h and
> hsmmc-omap.h which are not used anymore post
> conversion to device-tree.
Hey that's nice! That gets us a bit closer removing the
old platform data for that driver.
Regards,
Tony
On 17 July 2017 at 08:01, Tony Lindgren <[email protected]> wrote:
> * Faiz Abbas <[email protected]> [170714 05:48]:
>> This patch series removes some code in omap_hsmmc.c
>> and hsmmc.c and members from hsmmc.h and
>> hsmmc-omap.h which are not used anymore post
>> conversion to device-tree.
>
> Hey that's nice! That gets us a bit closer removing the
> old platform data for that driver.
Tony,
As it seems Kishon is working on some more omap_hsmmc changes, I
wondering whether it's fine if I pick this series via my mmc tree. To
avoid merge conflicts later on?
Kind regards
Uffe
* Ulf Hansson <[email protected]> [170717 00:09]:
> On 17 July 2017 at 08:01, Tony Lindgren <[email protected]> wrote:
> > * Faiz Abbas <[email protected]> [170714 05:48]:
> >> This patch series removes some code in omap_hsmmc.c
> >> and hsmmc.c and members from hsmmc.h and
> >> hsmmc-omap.h which are not used anymore post
> >> conversion to device-tree.
> >
> > Hey that's nice! That gets us a bit closer removing the
> > old platform data for that driver.
>
> Tony,
>
> As it seems Kishon is working on some more omap_hsmmc changes, I
> wondering whether it's fine if I pick this series via my mmc tree. To
> avoid merge conflicts later on?
Yes please do and for both feel free to add:
Acked-by: Tony Lindgren <[email protected]>
And if you want to be extra nice, please add these two directly
on v4.13-rc1 before merging them into your branch in case I need
to merge them in too for any unlikely SoC related conflicts.
Regards,
Tony
On 14 July 2017 at 14:46, Faiz Abbas <[email protected]> wrote:
> Most platforms using OMAP hsmmc driver have switched to device tree
> for passing platform data to omap_hsmmc.c driver.
>
> The hsmmc.c file in mach-omap2 exists only to support pandora board
> which uses wl1251 driver in legacy platform data mode.
>
> Hence, remove the dead code not used by the pandora board.
>
> Signed-off-by: Faiz Abbas <[email protected]>
I just got an ack from Tony to pick this up. So I did that (including
the mmc change in patch 2) and intend to send this for 4.13 rcs, via
my fixes branch in my mmc tree.
However the below comment for testing puzzles me. Either it's dead
code or not, so then what is there to test? :-)
Anyway, it's available on my fixes and next branch, so let's see if
zero build reports some issues.
> ---
> This is only compile tested. Someone with a pandora board should help
> test this for functionality.
>
> arch/arm/mach-omap2/hsmmc.c | 239 +-------------------------------------------
> arch/arm/mach-omap2/hsmmc.h | 9 --
> 2 files changed, 2 insertions(+), 246 deletions(-)
[...]
Kind regards
Uffe
Hi Ulfe,
I just wanted to make sure that no regressions happen on pandora board.
I have tested this on dra71x-evm.
Regards,
Faiz
On Monday 17 July 2017 06:38 PM, Ulf Hansson wrote:
> On 14 July 2017 at 14:46, Faiz Abbas <[email protected]> wrote:
>> Most platforms using OMAP hsmmc driver have switched to device tree
>> for passing platform data to omap_hsmmc.c driver.
>>
>> The hsmmc.c file in mach-omap2 exists only to support pandora board
>> which uses wl1251 driver in legacy platform data mode.
>>
>> Hence, remove the dead code not used by the pandora board.
>>
>> Signed-off-by: Faiz Abbas <[email protected]>
>
> I just got an ack from Tony to pick this up. So I did that (including
> the mmc change in patch 2) and intend to send this for 4.13 rcs, via
> my fixes branch in my mmc tree.
>
> However the below comment for testing puzzles me. Either it's dead
> code or not, so then what is there to test? :-)
>
> Anyway, it's available on my fixes and next branch, so let's see if
> zero build reports some issues.
>
>> ---
>> This is only compile tested. Someone with a pandora board should help
>> test this for functionality.
>>
>> arch/arm/mach-omap2/hsmmc.c | 239 +-------------------------------------------
>> arch/arm/mach-omap2/hsmmc.h | 9 --
>> 2 files changed, 2 insertions(+), 246 deletions(-)
>
> [...]
>
> Kind regards
> Uffe
>