Fixed a coding style issue.
Signed-off-by: Frank Werner-Krippendorf <[email protected]>
---
drivers/staging/rtl8712/rtl871x_event.h | 10 +++++-----
drivers/staging/rtl8712/rtl871x_io.h | 2 +-
drivers/staging/rtl8712/rtl871x_pwrctrl.h | 10 +++++-----
drivers/staging/rtl8712/rtl871x_xmit.h | 14 +++++++-------
4 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/rtl8712/rtl871x_event.h b/drivers/staging/rtl8712/rtl871x_event.h
index 5171379..2e59e8e 100644
--- a/drivers/staging/rtl8712/rtl871x_event.h
+++ b/drivers/staging/rtl8712/rtl871x_event.h
@@ -90,13 +90,13 @@ struct event_node {
unsigned char *node;
unsigned char evt_code;
unsigned short evt_sz;
- /*volatile*/ int *caller_ff_tail;
+ int *caller_ff_tail;
int caller_ff_sz;
};
struct c2hevent_queue {
- /*volatile*/ int head;
- /*volatile*/ int tail;
+ int head;
+ int tail;
struct event_node nodes[C2HEVENT_SZ];
unsigned char seq;
};
@@ -104,8 +104,8 @@ struct c2hevent_queue {
#define NETWORK_QUEUE_SZ 4
struct network_queue {
- /*volatile*/ int head;
- /*volatile*/ int tail;
+ int head;
+ int tail;
struct wlan_bssid_ex networks[NETWORK_QUEUE_SZ];
};
diff --git a/drivers/staging/rtl8712/rtl871x_io.h b/drivers/staging/rtl8712/rtl871x_io.h
index dd054d7..61d9e41 100644
--- a/drivers/staging/rtl8712/rtl871x_io.h
+++ b/drivers/staging/rtl8712/rtl871x_io.h
@@ -113,7 +113,7 @@ struct _io_ops {
struct io_req {
struct list_head list;
u32 addr;
- /*volatile*/ u32 val;
+ u32 val;
u32 command;
u32 status;
u8 *pbuf;
diff --git a/drivers/staging/rtl8712/rtl871x_pwrctrl.h b/drivers/staging/rtl8712/rtl871x_pwrctrl.h
index bd2c3a2..6451beb 100644
--- a/drivers/staging/rtl8712/rtl871x_pwrctrl.h
+++ b/drivers/staging/rtl8712/rtl871x_pwrctrl.h
@@ -89,14 +89,14 @@ struct reportpwrstate_parm {
struct pwrctrl_priv {
struct mutex mutex_lock;
- /*volatile*/ u8 rpwm; /* requested power state for fw */
+ u8 rpwm; /* requested power state for fw */
/* fw current power state. updated when 1. read from HCPWM or
* 2. driver lowers power level
*/
- /*volatile*/ u8 cpwm;
- /*volatile*/ u8 tog; /* toggling */
- /*volatile*/ u8 cpwm_tog; /* toggling */
- /*volatile*/ u8 tgt_rpwm; /* wanted power state */
+ u8 cpwm;
+ u8 tog; /* toggling */
+ u8 cpwm_tog; /* toggling */
+ u8 tgt_rpwm; /* wanted power state */
uint pwr_mode;
uint smart_ps;
uint alives;
diff --git a/drivers/staging/rtl8712/rtl871x_xmit.h b/drivers/staging/rtl8712/rtl871x_xmit.h
index 4092727..aac0e14 100644
--- a/drivers/staging/rtl8712/rtl871x_xmit.h
+++ b/drivers/staging/rtl8712/rtl871x_xmit.h
@@ -160,8 +160,8 @@ struct xmit_frame {
_pkt *pkt;
int frame_tag;
struct _adapter *padapter;
- u8 *buf_addr;
- struct xmit_buf *pxmitbuf;
+ u8 *buf_addr;
+ struct xmit_buf *pxmitbuf;
u8 *mem_addr;
u16 sz[8];
struct urb *pxmit_urb[8];
@@ -194,11 +194,11 @@ struct sta_xmit_priv {
};
struct hw_txqueue {
- /*volatile*/ sint head;
- /*volatile*/ sint tail;
- /*volatile*/ sint free_sz; /*in units of 64 bytes*/
- /*volatile*/ sint free_cmdsz;
- /*volatile*/ sint txsz[8];
+ sint head;
+ sint tail;
+ sint free_sz; /*in units of 64 bytes*/
+ sint free_cmdsz;
+ sint txsz[8];
uint ff_hwaddr;
uint cmd_hwaddr;
sint ac_tag;
--
2.7.4
On Sun, Aug 05, 2018 at 07:12:32PM +0200, Frank Werner-Krippendorf wrote:
> Fixed a coding style issue.
>
> Signed-off-by: Frank Werner-Krippendorf <[email protected]>
> ---
> drivers/staging/rtl8712/rtl871x_event.h | 10 +++++-----
> drivers/staging/rtl8712/rtl871x_io.h | 2 +-
> drivers/staging/rtl8712/rtl871x_pwrctrl.h | 10 +++++-----
> drivers/staging/rtl8712/rtl871x_xmit.h | 14 +++++++-------
> 4 files changed, 18 insertions(+), 18 deletions(-)
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him
a patch that has triggered this response. He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created. Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.
You are receiving this message because of the following common error(s)
as indicated below:
- Your patch did many different things all at once, making it difficult
to review. All Linux kernel patches need to only do one thing at a
time. If you need to do multiple things (such as clean up all coding
style issues in a file/driver), do it in a sequence of patches, each
one doing only one thing. This will make it easier to review the
patches to ensure that they are correct, and to help alleviate any
merge issues that larger patches can cause.
- You did not specify a description of why the patch is needed, or
possibly, any description at all, in the email body. Please read the
section entitled "The canonical patch format" in the kernel file,
Documentation/SubmittingPatches for what is needed in order to
properly describe the change.
- You did not write a descriptive Subject: for the patch, allowing Greg,
and everyone else, to know what this patch is all about. Please read
the section entitled "The canonical patch format" in the kernel file,
Documentation/SubmittingPatches for what a proper Subject: line should
look like.
If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.
thanks,
greg k-h's patch email bot