This patch fix a typo where build is used instead of built.
Signed-off-by: Corentin Labbe <[email protected]>
---
drivers/hwmon/Kconfig | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 532a0532d01b..100b7fce1412 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -179,7 +179,7 @@ config SENSORS_ADT7X10
This module contains common code shared by the ADT7310/ADT7320 and
ADT7410/ADT7420 temperature monitoring chip drivers.
- If build as a module, the module will be called adt7x10.
+ If built as a module, the module will be called adt7x10.
config SENSORS_ADT7310
tristate "Analog Devices ADT7310/ADT7320"
@@ -242,7 +242,7 @@ config SENSORS_ADT7475
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
chips.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adt7475.
config SENSORS_ASC7621
@@ -666,7 +666,7 @@ config SENSORS_JZ4740
If you say yes here you get support for reading adc values from the ADCIN
pin on Ingenic JZ4740 SoC based boards.
- This driver can also be build as a module. If so, the module will be
+ This driver can also be built as a module. If so, the module will be
called jz4740-hwmon.
config SENSORS_JC42
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.
- This driver can also be build as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called amc6821.
config SENSORS_INA209
--
2.18.1
This patch remove extra space after a dot.
Signed-off-by: Corentin Labbe <[email protected]>
---
drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
1 file changed, 118 insertions(+), 118 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 100b7fce1412..3ed91b21f368 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -11,7 +11,7 @@ menuconfig HWMON
of a system. Most modern motherboards include such a device. It
can include temperature sensors, voltage sensors, fan speed
sensors and various additional features such as the ability to
- control the speed of the fans. If you want this support you
+ control the speed of the fans. If you want this support you
should say Y here and also to the specific driver(s) for your
sensors chip(s) below.
@@ -19,7 +19,7 @@ menuconfig HWMON
sensors-detect script from the lm_sensors package. Read
<file:Documentation/hwmon/userspace-tools> for details.
- This support can also be built as a module. If so, the module
+ This support can also be built as a module. If so, the module
will be called hwmon.
if HWMON
@@ -46,7 +46,7 @@ config SENSORS_AB8500
AB8500 die and two GPADC channels. The GPADC channel are preferably
used to access sensors outside the AB8500 chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called abx500-temp.
config SENSORS_ABITUGURU
@@ -61,7 +61,7 @@ config SENSORS_ABITUGURU
of which motherboards have which revision see
Documentation/hwmon/abituguru
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called abituguru.
config SENSORS_ABITUGURU3
@@ -75,7 +75,7 @@ config SENSORS_ABITUGURU3
2005). For more info and a list of which motherboards have which
revision see Documentation/hwmon/abituguru3
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called abituguru3.
config SENSORS_AD7314
@@ -116,7 +116,7 @@ config SENSORS_ADM1021
and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adm1021.
config SENSORS_ADM1025
@@ -127,7 +127,7 @@ config SENSORS_ADM1025
If you say yes here you get support for Analog Devices ADM1025
and Philips NE1619 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adm1025.
config SENSORS_ADM1026
@@ -138,7 +138,7 @@ config SENSORS_ADM1026
If you say yes here you get support for Analog Devices ADM1026
sensor chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adm1026.
config SENSORS_ADM1029
@@ -149,7 +149,7 @@ config SENSORS_ADM1029
sensor chip.
Very rare chip, please let us know you use it.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adm1029.
config SENSORS_ADM1031
@@ -159,7 +159,7 @@ config SENSORS_ADM1031
If you say yes here you get support for Analog Devices ADM1031
and ADM1030 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adm1031.
config SENSORS_ADM9240
@@ -170,7 +170,7 @@ config SENSORS_ADM9240
If you say yes here you get support for Analog Devices ADM9240,
Dallas DS1780, National Semiconductor LM81 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adm9240.
config SENSORS_ADT7X10
@@ -242,7 +242,7 @@ config SENSORS_ADT7475
ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adt7475.
config SENSORS_ASC7621
@@ -255,7 +255,7 @@ config SENSORS_ASC7621
aSC7621
aSC7621a
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called asc7621.
config SENSORS_K8TEMP
@@ -267,7 +267,7 @@ config SENSORS_K8TEMP
microarchitecture. Please note that you will need at least
lm-sensors 2.10.1 for proper userspace support.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called k8temp.
config SENSORS_K10TEMP
@@ -280,7 +280,7 @@ config SENSORS_K10TEMP
12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
and 16h (Kabini/Mullins) microarchitectures.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called k10temp.
config SENSORS_FAM15H_POWER
@@ -290,7 +290,7 @@ config SENSORS_FAM15H_POWER
If you say yes here you get support for processor power
information of your AMD family 15h CPU.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called fam15h_power.
config SENSORS_APPLESMC
@@ -326,7 +326,7 @@ config SENSORS_ARM_SCMI
and power sensors available on SCMI based platforms. The actual
number and type of sensors exported depend on the platform.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called scmi-hwmon.
config SENSORS_ARM_SCPI
@@ -346,7 +346,7 @@ config SENSORS_ASB100
If you say yes here you get support for the ASB100 Bach sensor
chip found on some Asus mainboards.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called asb100.
config SENSORS_ASPEED
@@ -371,7 +371,7 @@ config SENSORS_ATXP1
If your board have such a chip, you are able to control your CPU
core and other voltages.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called atxp1.
config SENSORS_DS620
@@ -381,7 +381,7 @@ config SENSORS_DS620
If you say yes here you get support for Dallas Semiconductor
DS620 sensor chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ds620.
config SENSORS_DS1621
@@ -396,7 +396,7 @@ config SENSORS_DS1621
- Maxim Integrated DS1721
- Maxim Integrated DS1731
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ds1621.
config SENSORS_DELL_SMM
@@ -427,7 +427,7 @@ config SENSORS_DA9055
If you say yes here you get support for ADC on the Dialog
Semiconductor DA9055 PMIC.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called da9055-hwmon.
config SENSORS_I5K_AMB
@@ -448,7 +448,7 @@ config SENSORS_F71805F
features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
Super-I/O chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called f71805f.
config SENSORS_F71882FG
@@ -470,7 +470,7 @@ config SENSORS_F71882FG
F81801U
F81865F
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called f71882fg.
config SENSORS_F75375S
@@ -480,7 +480,7 @@ config SENSORS_F75375S
If you say yes here you get support for hardware monitoring
features of the Fintek F75375S/SP, F75373 and F75387
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called f75375s.
config SENSORS_MC13783_ADC
@@ -502,7 +502,7 @@ config SENSORS_FSCHMD
fscscy and fscher drivers and adding support for several other FSC
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called fschmd.
config SENSORS_FTSTEUTATES
@@ -524,7 +524,7 @@ config SENSORS_GL518SM
If you say yes here you get support for Genesys Logic GL518SM
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called gl518sm.
config SENSORS_GL520SM
@@ -535,7 +535,7 @@ config SENSORS_GL520SM
If you say yes here you get support for Genesys Logic GL520SM
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called gl520sm.
config SENSORS_G760A
@@ -545,7 +545,7 @@ config SENSORS_G760A
If you say yes here you get support for Global Mixed-mode
Technology Inc G760A fan speed PWM controller chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called g760a.
config SENSORS_G762
@@ -555,7 +555,7 @@ config SENSORS_G762
If you say yes here you get support for Global Mixed-mode
Technology Inc G762 and G763 fan speed PWM controller chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called g762.
config SENSORS_GPIO_FAN
@@ -566,7 +566,7 @@ config SENSORS_GPIO_FAN
help
If you say yes here you get support for fans connected to GPIO lines.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called gpio-fan.
config SENSORS_HIH6130
@@ -576,7 +576,7 @@ config SENSORS_HIH6130
If you say yes here you get support for Honeywell Humidicon
HIH-6130 and HIH-6131 Humidicon humidity sensors.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called hih6130.
config SENSORS_IBMAEM
@@ -590,7 +590,7 @@ config SENSORS_IBMAEM
the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
and certain HC10/HS2x/LS2x/QS2x blades.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ibmaem.
config SENSORS_IBMPEX
@@ -604,7 +604,7 @@ config SENSORS_IBMPEX
x3655, and x3755; the x3800, x3850, and x3950 models that have
PCI Express; and some of the HS2x, LS2x, and QS2x blades.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ibmpex.
config SENSORS_IBMPOWERNV
@@ -656,7 +656,7 @@ config SENSORS_IT87
IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
clone.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called it87.
config SENSORS_JZ4740
@@ -680,7 +680,7 @@ config SENSORS_JC42
MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called jc42.
config SENSORS_POWR1220
@@ -691,7 +691,7 @@ config SENSORS_POWR1220
functions of the Lattice POWR1220 isp Power Supply Monitoring,
Sequencing and Margining Controller.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called powr1220.
config SENSORS_LINEAGE
@@ -702,7 +702,7 @@ config SENSORS_LINEAGE
series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
CP2000DC, CP2725, and others.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lineage-pem.
config SENSORS_LTC2945
@@ -803,7 +803,7 @@ config SENSORS_MAX1111
Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
ADC chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max1111.
config SENSORS_MAX16065
@@ -819,7 +819,7 @@ config SENSORS_MAX16065
MAX16070
MAX16071
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max16065.
config SENSORS_MAX1619
@@ -828,7 +828,7 @@ config SENSORS_MAX1619
help
If you say yes here you get support for MAX1619 sensor chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max1619.
config SENSORS_MAX1668
@@ -838,7 +838,7 @@ config SENSORS_MAX1668
If you say yes here you get support for MAX1668, MAX1989 and
MAX1805 chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max1668.
config SENSORS_MAX197
@@ -881,7 +881,7 @@ config SENSORS_MAX6639
If you say yes here you get support for the MAX6639
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max6639.
config SENSORS_MAX6642
@@ -892,7 +892,7 @@ config SENSORS_MAX6642
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
with Overtemperature Alarm from Maxim.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max6642.
config SENSORS_MAX6650
@@ -902,7 +902,7 @@ config SENSORS_MAX6650
If you say yes here you get support for the MAX6650 / MAX6651
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max6650.
config SENSORS_MAX6697
@@ -913,7 +913,7 @@ config SENSORS_MAX6697
MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max6697.
config SENSORS_MAX31790
@@ -923,7 +923,7 @@ config SENSORS_MAX31790
If you say yes here you get support for 6-Channel PWM-Output
Fan RPM Controller.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called max31790.
config SENSORS_MCP3021
@@ -934,7 +934,7 @@ config SENSORS_MCP3021
The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
with 12-bit resolution.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called mcp3021.
config SENSORS_MLXREG_FAN
@@ -957,7 +957,7 @@ config SENSORS_TC654
The TC654 and TC655 are PWM mode fan speed controllers with
FanSense technology for use with brushless DC fans.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tc654.
config SENSORS_MENF21BMC_HWMON
@@ -983,7 +983,7 @@ config SENSORS_ADCXX
Examples : ADC081S101, ADC124S501, ...
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called adcxx.
config SENSORS_LM63
@@ -996,7 +996,7 @@ config SENSORS_LM63
on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
others.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm63.
config SENSORS_LM70
@@ -1007,7 +1007,7 @@ config SENSORS_LM70
LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
ture sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm70.
config SENSORS_LM73
@@ -1016,7 +1016,7 @@ config SENSORS_LM73
help
If you say yes here you get support for National Semiconductor LM73
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm73.
config SENSORS_LM75
@@ -1046,7 +1046,7 @@ config SENSORS_LM75
that with some chips which don't replicate LM75 quirks exactly,
you may need the "force" module parameter.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm75.
config SENSORS_LM77
@@ -1056,7 +1056,7 @@ config SENSORS_LM77
If you say yes here you get support for National Semiconductor LM77
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm77.
config SENSORS_LM78
@@ -1067,7 +1067,7 @@ config SENSORS_LM78
If you say yes here you get support for National Semiconductor LM78,
LM78-J and LM79.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm78.
config SENSORS_LM80
@@ -1077,7 +1077,7 @@ config SENSORS_LM80
If you say yes here you get support for National Semiconductor
LM80 and LM96080 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm80.
config SENSORS_LM83
@@ -1087,7 +1087,7 @@ config SENSORS_LM83
If you say yes here you get support for National Semiconductor
LM82 and LM83 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm83.
config SENSORS_LM85
@@ -1099,7 +1099,7 @@ config SENSORS_LM85
sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
EMC6D101, EMC6D102, and EMC6D103.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm85.
config SENSORS_LM87
@@ -1110,7 +1110,7 @@ config SENSORS_LM87
If you say yes here you get support for National Semiconductor LM87
and Analog Devices ADM1024 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm87.
config SENSORS_LM90
@@ -1124,7 +1124,7 @@ config SENSORS_LM90
Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and
Texas Instruments TMP451 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm90.
config SENSORS_LM92
@@ -1134,7 +1134,7 @@ config SENSORS_LM92
If you say yes here you get support for National Semiconductor LM92
and Maxim MAX6635 sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm92.
config SENSORS_LM93
@@ -1145,7 +1145,7 @@ config SENSORS_LM93
If you say yes here you get support for National Semiconductor LM93,
LM94, and compatible sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm93.
config SENSORS_LM95234
@@ -1155,7 +1155,7 @@ config SENSORS_LM95234
If you say yes here you get support for the LM95233 and LM95234
temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm95234.
config SENSORS_LM95241
@@ -1165,7 +1165,7 @@ config SENSORS_LM95241
If you say yes here you get support for LM95231 and LM95241 sensor
chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm95241.
config SENSORS_LM95245
@@ -1176,7 +1176,7 @@ config SENSORS_LM95245
If you say yes here you get support for LM95235 and LM95245
temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called lm95245.
config SENSORS_PC87360
@@ -1190,7 +1190,7 @@ config SENSORS_PC87360
control. The PC87365 and PC87366 additionally have voltage and
temperature monitoring.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called pc87360.
config SENSORS_PC87427
@@ -1204,7 +1204,7 @@ config SENSORS_PC87427
monitoring. Fan speed monitoring and control are supported, as
well as temperature monitoring. Voltages aren't supported yet.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called pc87427.
config SENSORS_NTC_THERMISTOR
@@ -1220,7 +1220,7 @@ config SENSORS_NTC_THERMISTOR
NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ntc-thermistor.
config SENSORS_NCT6683
@@ -1230,7 +1230,7 @@ config SENSORS_NCT6683
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6683D eSIO chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called nct6683.
config SENSORS_NCT6775
@@ -1244,7 +1244,7 @@ config SENSORS_NCT6775
Super-I/O chips. This driver replaces the w83627ehf driver for
NCT6775F and NCT6776F.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called nct6775.
config SENSORS_NCT7802
@@ -1255,7 +1255,7 @@ config SENSORS_NCT7802
If you say yes here you get support for the Nuvoton NCT7802Y
hardware monitoring chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called nct7802.
config SENSORS_NCT7904
@@ -1265,7 +1265,7 @@ config SENSORS_NCT7904
If you say yes here you get support for the Nuvoton NCT7904
hardware monitoring chip, including manual fan speed control.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called nct7904.
config SENSORS_NPCM7XX
@@ -1302,11 +1302,11 @@ config SENSORS_PCF8591
If you say yes here you get support for Philips PCF8591 4-channel
ADC, 1-channel DAC chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called pcf8591.
These devices are hard to detect and rarely found on mainstream
- hardware. If unsure, say N.
+ hardware. If unsure, say N.
source drivers/hwmon/pmbus/Kconfig
@@ -1319,7 +1319,7 @@ config SENSORS_PWM_FAN
The driver uses the generic PWM interface, thus it will work on a
variety of SoCs.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called pwm-fan.
config SENSORS_RASPBERRYPI_HWMON
@@ -1340,7 +1340,7 @@ config SENSORS_SHT15
If you say yes here you get support for the Sensiron SHT10, SHT11,
SHT15, SHT71, SHT75 humidity and temperature sensors.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called sht15.
config SENSORS_SHT21
@@ -1350,7 +1350,7 @@ config SENSORS_SHT21
If you say yes here you get support for the Sensiron SHT21, SHT25
humidity and temperature sensors.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called sht21.
config SENSORS_SHT3x
@@ -1361,7 +1361,7 @@ config SENSORS_SHT3x
If you say yes here you get support for the Sensiron SHT30 and SHT31
humidity and temperature sensors.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called sht3x.
config SENSORS_SHTC1
@@ -1371,7 +1371,7 @@ config SENSORS_SHTC1
If you say yes here you get support for the Sensiron SHTC1 and SHTW1
humidity and temperature sensors.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called shtc1.
config SENSORS_S3C
@@ -1398,7 +1398,7 @@ config SENSORS_SIS5595
If you say yes here you get support for the integrated sensors in
SiS5595 South Bridges.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called sis5595.
config SENSORS_DME1737
@@ -1410,7 +1410,7 @@ config SENSORS_DME1737
and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
Asus A8000 Super-I/O chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called dme1737.
config SENSORS_EMC1403
@@ -1431,7 +1431,7 @@ config SENSORS_EMC2103
If you say yes here you get support for the temperature
and fan sensors of the SMSC EMC2103 chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called emc2103.
config SENSORS_EMC6W201
@@ -1441,7 +1441,7 @@ config SENSORS_EMC6W201
If you say yes here you get support for the SMSC EMC6W201
hardware monitoring chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called emc6w201.
config SENSORS_SMSC47M1
@@ -1458,7 +1458,7 @@ config SENSORS_SMSC47M1
driver, select also "SMSC LPC47M192 and compatibles" below for
those.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called smsc47m1.
config SENSORS_SMSC47M192
@@ -1475,7 +1475,7 @@ config SENSORS_SMSC47M192
"SMSC LPC47M10x and compatibles" above. You need both drivers
if you want fan control and voltage/temperature sensor support.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called smsc47m192.
config SENSORS_SMSC47B397
@@ -1485,7 +1485,7 @@ config SENSORS_SMSC47B397
If you say yes here you get support for the SMSC LPC47B397-NC
sensor chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called smsc47b397.
config SENSORS_SCH56XX_COMMON
@@ -1501,7 +1501,7 @@ config SENSORS_SCH5627
features of the SMSC SCH5627 Super-I/O chip including support for
the integrated watchdog.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called sch5627.
config SENSORS_SCH5636
@@ -1519,7 +1519,7 @@ config SENSORS_SCH5636
Theseus' hardware monitoring features including support for the
integrated watchdog.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called sch5636.
config SENSORS_STTS751
@@ -1529,7 +1529,7 @@ config SENSORS_STTS751
If you say yes here you get support for STTS751
temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called stts751.
config SENSORS_SMM665
@@ -1563,7 +1563,7 @@ config SENSORS_ADS1015
If you say yes here you get support for Texas Instruments
ADS1015/ADS1115 12/16-bit 4-input ADC device.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ads1015.
config SENSORS_ADS7828
@@ -1575,7 +1575,7 @@ config SENSORS_ADS7828
ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
it is 8-bit on ADS7830.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ads7828.
config SENSORS_ADS7871
@@ -1584,7 +1584,7 @@ config SENSORS_ADS7871
help
If you say yes here you get support for TI ADS7871 & ADS7870
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ads7871.
config SENSORS_AMC6821
@@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
If you say yes here you get support for the Texas Instruments
AMC6821 hardware monitoring chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called amc6821.
config SENSORS_INA209
@@ -1618,7 +1618,7 @@ config SENSORS_INA2XX
The INA2xx driver is configured for the default configuration of
the part as described in the datasheet.
Default value for Rshunt is 10 mOhms.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ina2xx.
config SENSORS_INA3221
@@ -1629,7 +1629,7 @@ config SENSORS_INA3221
If you say yes here you get support for the TI INA3221 Triple Power
Monitor.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called ina3221.
config SENSORS_TC74
@@ -1639,7 +1639,7 @@ config SENSORS_TC74
If you say yes here you get support for Microchip TC74 single
input temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tc74.
config SENSORS_THMC50
@@ -1649,7 +1649,7 @@ config SENSORS_THMC50
If you say yes here you get support for Texas Instruments THMC50
sensor chips and clones: the Analog Devices ADM1022.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called thmc50.
config SENSORS_TMP102
@@ -1660,7 +1660,7 @@ config SENSORS_TMP102
If you say yes here you get support for Texas Instruments TMP102
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tmp102.
config SENSORS_TMP103
@@ -1671,7 +1671,7 @@ config SENSORS_TMP103
If you say yes here you get support for Texas Instruments TMP103
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tmp103.
config SENSORS_TMP108
@@ -1682,7 +1682,7 @@ config SENSORS_TMP108
If you say yes here you get support for Texas Instruments TMP108
sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tmp108.
config SENSORS_TMP401
@@ -1692,7 +1692,7 @@ config SENSORS_TMP401
If you say yes here you get support for Texas Instruments TMP401,
TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tmp401.
config SENSORS_TMP421
@@ -1702,7 +1702,7 @@ config SENSORS_TMP421
If you say yes here you get support for Texas Instruments TMP421,
TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called tmp421.
config SENSORS_VEXPRESS
@@ -1729,7 +1729,7 @@ config SENSORS_VIA686A
If you say yes here you get support for the integrated sensors in
Via 686A/B South Bridges.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called via686a.
config SENSORS_VT1211
@@ -1740,7 +1740,7 @@ config SENSORS_VT1211
If you say yes here then you get support for hardware monitoring
features of the VIA VT1211 Super-I/O chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called vt1211.
config SENSORS_VT8231
@@ -1751,7 +1751,7 @@ config SENSORS_VT8231
If you say yes here then you get support for the integrated sensors
in the VIA VT8231 device.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called vt8231.
config SENSORS_W83773G
@@ -1761,7 +1761,7 @@ config SENSORS_W83773G
If you say yes here you get support for the Nuvoton W83773G hardware
monitoring chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83773g.
config SENSORS_W83781D
@@ -1773,7 +1773,7 @@ config SENSORS_W83781D
of sensor chips: the W83781D, W83782D and W83783S, and the similar
Asus AS99127F.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83781d.
config SENSORS_W83791D
@@ -1783,7 +1783,7 @@ config SENSORS_W83791D
help
If you say yes here you get support for the Winbond W83791D chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83791d.
config SENSORS_W83792D
@@ -1792,7 +1792,7 @@ config SENSORS_W83792D
help
If you say yes here you get support for the Winbond W83792D chip.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83792d.
config SENSORS_W83793
@@ -1804,7 +1804,7 @@ config SENSORS_W83793
hardware monitoring chip, including support for the integrated
watchdog.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83793.
config SENSORS_W83795
@@ -1815,7 +1815,7 @@ config SENSORS_W83795
W83795ADG hardware monitoring chip, including manual fan speed
control.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83795.
config SENSORS_W83795_FANCTRL
@@ -1842,7 +1842,7 @@ config SENSORS_W83L785TS
sensor chip, which is used on the Asus A7N8X, among other
motherboards.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83l785ts.
config SENSORS_W83L786NG
@@ -1852,7 +1852,7 @@ config SENSORS_W83L786NG
If you say yes here you get support for the Winbond W83L786NG
and W83L786NR sensor chips.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83l786ng.
config SENSORS_W83627HF
@@ -1864,7 +1864,7 @@ config SENSORS_W83627HF
of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
W83697HF.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83627hf.
config SENSORS_W83627EHF
@@ -1884,7 +1884,7 @@ config SENSORS_W83627EHF
This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
(also known as W83667HG-I), and NCT6776F.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called w83627ehf.
config SENSORS_WM831X
@@ -1895,7 +1895,7 @@ config SENSORS_WM831X
monitoring functionality of the Wolfson Microelectronics
WM831x series of PMICs.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called wm831x-hwmon.
config SENSORS_WM8350
@@ -1905,7 +1905,7 @@ config SENSORS_WM8350
If you say yes here you get support for the hardware
monitoring features of the WM835x series of PMICs.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called wm8350-hwmon.
config SENSORS_ULTRA45
--
2.18.1
On Thu, Nov 29, 2018 at 08:09:14PM +0000, Corentin Labbe wrote:
> This patch fix a typo where build is used instead of built.
>
> Signed-off-by: Corentin Labbe <[email protected]>
Applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/Kconfig | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 532a0532d01b..100b7fce1412 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -179,7 +179,7 @@ config SENSORS_ADT7X10
> This module contains common code shared by the ADT7310/ADT7320 and
> ADT7410/ADT7420 temperature monitoring chip drivers.
>
> - If build as a module, the module will be called adt7x10.
> + If built as a module, the module will be called adt7x10.
>
> config SENSORS_ADT7310
> tristate "Analog Devices ADT7310/ADT7320"
> @@ -242,7 +242,7 @@ config SENSORS_ADT7475
> ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
> chips.
>
> - This driver can also be build as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adt7475.
>
> config SENSORS_ASC7621
> @@ -666,7 +666,7 @@ config SENSORS_JZ4740
> If you say yes here you get support for reading adc values from the ADCIN
> pin on Ingenic JZ4740 SoC based boards.
>
> - This driver can also be build as a module. If so, the module will be
> + This driver can also be built as a module. If so, the module will be
> called jz4740-hwmon.
>
> config SENSORS_JC42
> @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
> If you say yes here you get support for the Texas Instruments
> AMC6821 hardware monitoring chips.
>
> - This driver can also be build as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called amc6821.
>
> config SENSORS_INA209
On Thu, Nov 29, 2018 at 08:09:15PM +0000, Corentin Labbe wrote:
> This patch remove extra space after a dot.
> Signed-off-by: Corentin Labbe <[email protected]>
Marginal ... I think that used to be common style a long time ago.
Nevertheless, applied to hwmon-next.
Thanks,
Guenter
> ---
> drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
> 1 file changed, 118 insertions(+), 118 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 100b7fce1412..3ed91b21f368 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -11,7 +11,7 @@ menuconfig HWMON
> of a system. Most modern motherboards include such a device. It
> can include temperature sensors, voltage sensors, fan speed
> sensors and various additional features such as the ability to
> - control the speed of the fans. If you want this support you
> + control the speed of the fans. If you want this support you
> should say Y here and also to the specific driver(s) for your
> sensors chip(s) below.
>
> @@ -19,7 +19,7 @@ menuconfig HWMON
> sensors-detect script from the lm_sensors package. Read
> <file:Documentation/hwmon/userspace-tools> for details.
>
> - This support can also be built as a module. If so, the module
> + This support can also be built as a module. If so, the module
> will be called hwmon.
>
> if HWMON
> @@ -46,7 +46,7 @@ config SENSORS_AB8500
> AB8500 die and two GPADC channels. The GPADC channel are preferably
> used to access sensors outside the AB8500 chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called abx500-temp.
>
> config SENSORS_ABITUGURU
> @@ -61,7 +61,7 @@ config SENSORS_ABITUGURU
> of which motherboards have which revision see
> Documentation/hwmon/abituguru
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called abituguru.
>
> config SENSORS_ABITUGURU3
> @@ -75,7 +75,7 @@ config SENSORS_ABITUGURU3
> 2005). For more info and a list of which motherboards have which
> revision see Documentation/hwmon/abituguru3
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called abituguru3.
>
> config SENSORS_AD7314
> @@ -116,7 +116,7 @@ config SENSORS_ADM1021
> and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
> Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adm1021.
>
> config SENSORS_ADM1025
> @@ -127,7 +127,7 @@ config SENSORS_ADM1025
> If you say yes here you get support for Analog Devices ADM1025
> and Philips NE1619 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adm1025.
>
> config SENSORS_ADM1026
> @@ -138,7 +138,7 @@ config SENSORS_ADM1026
> If you say yes here you get support for Analog Devices ADM1026
> sensor chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adm1026.
>
> config SENSORS_ADM1029
> @@ -149,7 +149,7 @@ config SENSORS_ADM1029
> sensor chip.
> Very rare chip, please let us know you use it.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adm1029.
>
> config SENSORS_ADM1031
> @@ -159,7 +159,7 @@ config SENSORS_ADM1031
> If you say yes here you get support for Analog Devices ADM1031
> and ADM1030 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adm1031.
>
> config SENSORS_ADM9240
> @@ -170,7 +170,7 @@ config SENSORS_ADM9240
> If you say yes here you get support for Analog Devices ADM9240,
> Dallas DS1780, National Semiconductor LM81 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adm9240.
>
> config SENSORS_ADT7X10
> @@ -242,7 +242,7 @@ config SENSORS_ADT7475
> ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
> chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adt7475.
>
> config SENSORS_ASC7621
> @@ -255,7 +255,7 @@ config SENSORS_ASC7621
> aSC7621
> aSC7621a
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called asc7621.
>
> config SENSORS_K8TEMP
> @@ -267,7 +267,7 @@ config SENSORS_K8TEMP
> microarchitecture. Please note that you will need at least
> lm-sensors 2.10.1 for proper userspace support.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called k8temp.
>
> config SENSORS_K10TEMP
> @@ -280,7 +280,7 @@ config SENSORS_K10TEMP
> 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity/Kaveri/Carrizo)
> and 16h (Kabini/Mullins) microarchitectures.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called k10temp.
>
> config SENSORS_FAM15H_POWER
> @@ -290,7 +290,7 @@ config SENSORS_FAM15H_POWER
> If you say yes here you get support for processor power
> information of your AMD family 15h CPU.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called fam15h_power.
>
> config SENSORS_APPLESMC
> @@ -326,7 +326,7 @@ config SENSORS_ARM_SCMI
> and power sensors available on SCMI based platforms. The actual
> number and type of sensors exported depend on the platform.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called scmi-hwmon.
>
> config SENSORS_ARM_SCPI
> @@ -346,7 +346,7 @@ config SENSORS_ASB100
> If you say yes here you get support for the ASB100 Bach sensor
> chip found on some Asus mainboards.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called asb100.
>
> config SENSORS_ASPEED
> @@ -371,7 +371,7 @@ config SENSORS_ATXP1
> If your board have such a chip, you are able to control your CPU
> core and other voltages.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called atxp1.
>
> config SENSORS_DS620
> @@ -381,7 +381,7 @@ config SENSORS_DS620
> If you say yes here you get support for Dallas Semiconductor
> DS620 sensor chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ds620.
>
> config SENSORS_DS1621
> @@ -396,7 +396,7 @@ config SENSORS_DS1621
> - Maxim Integrated DS1721
> - Maxim Integrated DS1731
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ds1621.
>
> config SENSORS_DELL_SMM
> @@ -427,7 +427,7 @@ config SENSORS_DA9055
> If you say yes here you get support for ADC on the Dialog
> Semiconductor DA9055 PMIC.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called da9055-hwmon.
>
> config SENSORS_I5K_AMB
> @@ -448,7 +448,7 @@ config SENSORS_F71805F
> features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
> Super-I/O chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called f71805f.
>
> config SENSORS_F71882FG
> @@ -470,7 +470,7 @@ config SENSORS_F71882FG
> F81801U
> F81865F
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called f71882fg.
>
> config SENSORS_F75375S
> @@ -480,7 +480,7 @@ config SENSORS_F75375S
> If you say yes here you get support for hardware monitoring
> features of the Fintek F75375S/SP, F75373 and F75387
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called f75375s.
>
> config SENSORS_MC13783_ADC
> @@ -502,7 +502,7 @@ config SENSORS_FSCHMD
> fscscy and fscher drivers and adding support for several other FSC
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called fschmd.
>
> config SENSORS_FTSTEUTATES
> @@ -524,7 +524,7 @@ config SENSORS_GL518SM
> If you say yes here you get support for Genesys Logic GL518SM
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called gl518sm.
>
> config SENSORS_GL520SM
> @@ -535,7 +535,7 @@ config SENSORS_GL520SM
> If you say yes here you get support for Genesys Logic GL520SM
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called gl520sm.
>
> config SENSORS_G760A
> @@ -545,7 +545,7 @@ config SENSORS_G760A
> If you say yes here you get support for Global Mixed-mode
> Technology Inc G760A fan speed PWM controller chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called g760a.
>
> config SENSORS_G762
> @@ -555,7 +555,7 @@ config SENSORS_G762
> If you say yes here you get support for Global Mixed-mode
> Technology Inc G762 and G763 fan speed PWM controller chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called g762.
>
> config SENSORS_GPIO_FAN
> @@ -566,7 +566,7 @@ config SENSORS_GPIO_FAN
> help
> If you say yes here you get support for fans connected to GPIO lines.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called gpio-fan.
>
> config SENSORS_HIH6130
> @@ -576,7 +576,7 @@ config SENSORS_HIH6130
> If you say yes here you get support for Honeywell Humidicon
> HIH-6130 and HIH-6131 Humidicon humidity sensors.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called hih6130.
>
> config SENSORS_IBMAEM
> @@ -590,7 +590,7 @@ config SENSORS_IBMAEM
> the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
> and certain HC10/HS2x/LS2x/QS2x blades.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ibmaem.
>
> config SENSORS_IBMPEX
> @@ -604,7 +604,7 @@ config SENSORS_IBMPEX
> x3655, and x3755; the x3800, x3850, and x3950 models that have
> PCI Express; and some of the HS2x, LS2x, and QS2x blades.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ibmpex.
>
> config SENSORS_IBMPOWERNV
> @@ -656,7 +656,7 @@ config SENSORS_IT87
> IT8603E, IT8620E, IT8623E, and IT8628E sensor chips, and the SiS950
> clone.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called it87.
>
> config SENSORS_JZ4740
> @@ -680,7 +680,7 @@ config SENSORS_JC42
> MCP9808, MCP98242, MCP98243, MCP98244, MCP9843, SE97, SE98,
> STTS424(E), STTS2002, STTS3000, TSE2002, TSE2004, TS3000, and TS3001.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called jc42.
>
> config SENSORS_POWR1220
> @@ -691,7 +691,7 @@ config SENSORS_POWR1220
> functions of the Lattice POWR1220 isp Power Supply Monitoring,
> Sequencing and Margining Controller.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called powr1220.
>
> config SENSORS_LINEAGE
> @@ -702,7 +702,7 @@ config SENSORS_LINEAGE
> series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
> CP2000DC, CP2725, and others.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lineage-pem.
>
> config SENSORS_LTC2945
> @@ -803,7 +803,7 @@ config SENSORS_MAX1111
> Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113
> ADC chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max1111.
>
> config SENSORS_MAX16065
> @@ -819,7 +819,7 @@ config SENSORS_MAX16065
> MAX16070
> MAX16071
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max16065.
>
> config SENSORS_MAX1619
> @@ -828,7 +828,7 @@ config SENSORS_MAX1619
> help
> If you say yes here you get support for MAX1619 sensor chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max1619.
>
> config SENSORS_MAX1668
> @@ -838,7 +838,7 @@ config SENSORS_MAX1668
> If you say yes here you get support for MAX1668, MAX1989 and
> MAX1805 chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max1668.
>
> config SENSORS_MAX197
> @@ -881,7 +881,7 @@ config SENSORS_MAX6639
> If you say yes here you get support for the MAX6639
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max6639.
>
> config SENSORS_MAX6642
> @@ -892,7 +892,7 @@ config SENSORS_MAX6642
> MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
> with Overtemperature Alarm from Maxim.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max6642.
>
> config SENSORS_MAX6650
> @@ -902,7 +902,7 @@ config SENSORS_MAX6650
> If you say yes here you get support for the MAX6650 / MAX6651
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max6650.
>
> config SENSORS_MAX6697
> @@ -913,7 +913,7 @@ config SENSORS_MAX6697
> MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699
> temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max6697.
>
> config SENSORS_MAX31790
> @@ -923,7 +923,7 @@ config SENSORS_MAX31790
> If you say yes here you get support for 6-Channel PWM-Output
> Fan RPM Controller.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called max31790.
>
> config SENSORS_MCP3021
> @@ -934,7 +934,7 @@ config SENSORS_MCP3021
> The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221
> with 12-bit resolution.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called mcp3021.
>
> config SENSORS_MLXREG_FAN
> @@ -957,7 +957,7 @@ config SENSORS_TC654
> The TC654 and TC655 are PWM mode fan speed controllers with
> FanSense technology for use with brushless DC fans.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tc654.
>
> config SENSORS_MENF21BMC_HWMON
> @@ -983,7 +983,7 @@ config SENSORS_ADCXX
>
> Examples : ADC081S101, ADC124S501, ...
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called adcxx.
>
> config SENSORS_LM63
> @@ -996,7 +996,7 @@ config SENSORS_LM63
> on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
> others.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm63.
>
> config SENSORS_LM70
> @@ -1007,7 +1007,7 @@ config SENSORS_LM70
> LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera-
> ture sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm70.
>
> config SENSORS_LM73
> @@ -1016,7 +1016,7 @@ config SENSORS_LM73
> help
> If you say yes here you get support for National Semiconductor LM73
> sensor chips.
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm73.
>
> config SENSORS_LM75
> @@ -1046,7 +1046,7 @@ config SENSORS_LM75
> that with some chips which don't replicate LM75 quirks exactly,
> you may need the "force" module parameter.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm75.
>
> config SENSORS_LM77
> @@ -1056,7 +1056,7 @@ config SENSORS_LM77
> If you say yes here you get support for National Semiconductor LM77
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm77.
>
> config SENSORS_LM78
> @@ -1067,7 +1067,7 @@ config SENSORS_LM78
> If you say yes here you get support for National Semiconductor LM78,
> LM78-J and LM79.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm78.
>
> config SENSORS_LM80
> @@ -1077,7 +1077,7 @@ config SENSORS_LM80
> If you say yes here you get support for National Semiconductor
> LM80 and LM96080 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm80.
>
> config SENSORS_LM83
> @@ -1087,7 +1087,7 @@ config SENSORS_LM83
> If you say yes here you get support for National Semiconductor
> LM82 and LM83 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm83.
>
> config SENSORS_LM85
> @@ -1099,7 +1099,7 @@ config SENSORS_LM85
> sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
> EMC6D101, EMC6D102, and EMC6D103.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm85.
>
> config SENSORS_LM87
> @@ -1110,7 +1110,7 @@ config SENSORS_LM87
> If you say yes here you get support for National Semiconductor LM87
> and Analog Devices ADM1024 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm87.
>
> config SENSORS_LM90
> @@ -1124,7 +1124,7 @@ config SENSORS_LM90
> Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and
> Texas Instruments TMP451 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm90.
>
> config SENSORS_LM92
> @@ -1134,7 +1134,7 @@ config SENSORS_LM92
> If you say yes here you get support for National Semiconductor LM92
> and Maxim MAX6635 sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm92.
>
> config SENSORS_LM93
> @@ -1145,7 +1145,7 @@ config SENSORS_LM93
> If you say yes here you get support for National Semiconductor LM93,
> LM94, and compatible sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm93.
>
> config SENSORS_LM95234
> @@ -1155,7 +1155,7 @@ config SENSORS_LM95234
> If you say yes here you get support for the LM95233 and LM95234
> temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm95234.
>
> config SENSORS_LM95241
> @@ -1165,7 +1165,7 @@ config SENSORS_LM95241
> If you say yes here you get support for LM95231 and LM95241 sensor
> chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm95241.
>
> config SENSORS_LM95245
> @@ -1176,7 +1176,7 @@ config SENSORS_LM95245
> If you say yes here you get support for LM95235 and LM95245
> temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called lm95245.
>
> config SENSORS_PC87360
> @@ -1190,7 +1190,7 @@ config SENSORS_PC87360
> control. The PC87365 and PC87366 additionally have voltage and
> temperature monitoring.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called pc87360.
>
> config SENSORS_PC87427
> @@ -1204,7 +1204,7 @@ config SENSORS_PC87427
> monitoring. Fan speed monitoring and control are supported, as
> well as temperature monitoring. Voltages aren't supported yet.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called pc87427.
>
> config SENSORS_NTC_THERMISTOR
> @@ -1220,7 +1220,7 @@ config SENSORS_NTC_THERMISTOR
> NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, NCP15WL333,
> NCP03WF104 and NCP15XH103 from Murata and B57330V2103 from EPCOS.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ntc-thermistor.
>
> config SENSORS_NCT6683
> @@ -1230,7 +1230,7 @@ config SENSORS_NCT6683
> If you say yes here you get support for the hardware monitoring
> functionality of the Nuvoton NCT6683D eSIO chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called nct6683.
>
> config SENSORS_NCT6775
> @@ -1244,7 +1244,7 @@ config SENSORS_NCT6775
> Super-I/O chips. This driver replaces the w83627ehf driver for
> NCT6775F and NCT6776F.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called nct6775.
>
> config SENSORS_NCT7802
> @@ -1255,7 +1255,7 @@ config SENSORS_NCT7802
> If you say yes here you get support for the Nuvoton NCT7802Y
> hardware monitoring chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called nct7802.
>
> config SENSORS_NCT7904
> @@ -1265,7 +1265,7 @@ config SENSORS_NCT7904
> If you say yes here you get support for the Nuvoton NCT7904
> hardware monitoring chip, including manual fan speed control.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called nct7904.
>
> config SENSORS_NPCM7XX
> @@ -1302,11 +1302,11 @@ config SENSORS_PCF8591
> If you say yes here you get support for Philips PCF8591 4-channel
> ADC, 1-channel DAC chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called pcf8591.
>
> These devices are hard to detect and rarely found on mainstream
> - hardware. If unsure, say N.
> + hardware. If unsure, say N.
>
> source drivers/hwmon/pmbus/Kconfig
>
> @@ -1319,7 +1319,7 @@ config SENSORS_PWM_FAN
> The driver uses the generic PWM interface, thus it will work on a
> variety of SoCs.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called pwm-fan.
>
> config SENSORS_RASPBERRYPI_HWMON
> @@ -1340,7 +1340,7 @@ config SENSORS_SHT15
> If you say yes here you get support for the Sensiron SHT10, SHT11,
> SHT15, SHT71, SHT75 humidity and temperature sensors.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called sht15.
>
> config SENSORS_SHT21
> @@ -1350,7 +1350,7 @@ config SENSORS_SHT21
> If you say yes here you get support for the Sensiron SHT21, SHT25
> humidity and temperature sensors.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called sht21.
>
> config SENSORS_SHT3x
> @@ -1361,7 +1361,7 @@ config SENSORS_SHT3x
> If you say yes here you get support for the Sensiron SHT30 and SHT31
> humidity and temperature sensors.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called sht3x.
>
> config SENSORS_SHTC1
> @@ -1371,7 +1371,7 @@ config SENSORS_SHTC1
> If you say yes here you get support for the Sensiron SHTC1 and SHTW1
> humidity and temperature sensors.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called shtc1.
>
> config SENSORS_S3C
> @@ -1398,7 +1398,7 @@ config SENSORS_SIS5595
> If you say yes here you get support for the integrated sensors in
> SiS5595 South Bridges.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called sis5595.
>
> config SENSORS_DME1737
> @@ -1410,7 +1410,7 @@ config SENSORS_DME1737
> and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
> Asus A8000 Super-I/O chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called dme1737.
>
> config SENSORS_EMC1403
> @@ -1431,7 +1431,7 @@ config SENSORS_EMC2103
> If you say yes here you get support for the temperature
> and fan sensors of the SMSC EMC2103 chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called emc2103.
>
> config SENSORS_EMC6W201
> @@ -1441,7 +1441,7 @@ config SENSORS_EMC6W201
> If you say yes here you get support for the SMSC EMC6W201
> hardware monitoring chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called emc6w201.
>
> config SENSORS_SMSC47M1
> @@ -1458,7 +1458,7 @@ config SENSORS_SMSC47M1
> driver, select also "SMSC LPC47M192 and compatibles" below for
> those.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called smsc47m1.
>
> config SENSORS_SMSC47M192
> @@ -1475,7 +1475,7 @@ config SENSORS_SMSC47M192
> "SMSC LPC47M10x and compatibles" above. You need both drivers
> if you want fan control and voltage/temperature sensor support.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called smsc47m192.
>
> config SENSORS_SMSC47B397
> @@ -1485,7 +1485,7 @@ config SENSORS_SMSC47B397
> If you say yes here you get support for the SMSC LPC47B397-NC
> sensor chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called smsc47b397.
>
> config SENSORS_SCH56XX_COMMON
> @@ -1501,7 +1501,7 @@ config SENSORS_SCH5627
> features of the SMSC SCH5627 Super-I/O chip including support for
> the integrated watchdog.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called sch5627.
>
> config SENSORS_SCH5636
> @@ -1519,7 +1519,7 @@ config SENSORS_SCH5636
> Theseus' hardware monitoring features including support for the
> integrated watchdog.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called sch5636.
>
> config SENSORS_STTS751
> @@ -1529,7 +1529,7 @@ config SENSORS_STTS751
> If you say yes here you get support for STTS751
> temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called stts751.
>
> config SENSORS_SMM665
> @@ -1563,7 +1563,7 @@ config SENSORS_ADS1015
> If you say yes here you get support for Texas Instruments
> ADS1015/ADS1115 12/16-bit 4-input ADC device.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ads1015.
>
> config SENSORS_ADS7828
> @@ -1575,7 +1575,7 @@ config SENSORS_ADS7828
> ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
> it is 8-bit on ADS7830.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ads7828.
>
> config SENSORS_ADS7871
> @@ -1584,7 +1584,7 @@ config SENSORS_ADS7871
> help
> If you say yes here you get support for TI ADS7871 & ADS7870
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ads7871.
>
> config SENSORS_AMC6821
> @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821
> If you say yes here you get support for the Texas Instruments
> AMC6821 hardware monitoring chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called amc6821.
>
> config SENSORS_INA209
> @@ -1618,7 +1618,7 @@ config SENSORS_INA2XX
> The INA2xx driver is configured for the default configuration of
> the part as described in the datasheet.
> Default value for Rshunt is 10 mOhms.
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ina2xx.
>
> config SENSORS_INA3221
> @@ -1629,7 +1629,7 @@ config SENSORS_INA3221
> If you say yes here you get support for the TI INA3221 Triple Power
> Monitor.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called ina3221.
>
> config SENSORS_TC74
> @@ -1639,7 +1639,7 @@ config SENSORS_TC74
> If you say yes here you get support for Microchip TC74 single
> input temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tc74.
>
> config SENSORS_THMC50
> @@ -1649,7 +1649,7 @@ config SENSORS_THMC50
> If you say yes here you get support for Texas Instruments THMC50
> sensor chips and clones: the Analog Devices ADM1022.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called thmc50.
>
> config SENSORS_TMP102
> @@ -1660,7 +1660,7 @@ config SENSORS_TMP102
> If you say yes here you get support for Texas Instruments TMP102
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tmp102.
>
> config SENSORS_TMP103
> @@ -1671,7 +1671,7 @@ config SENSORS_TMP103
> If you say yes here you get support for Texas Instruments TMP103
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tmp103.
>
> config SENSORS_TMP108
> @@ -1682,7 +1682,7 @@ config SENSORS_TMP108
> If you say yes here you get support for Texas Instruments TMP108
> sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tmp108.
>
> config SENSORS_TMP401
> @@ -1692,7 +1692,7 @@ config SENSORS_TMP401
> If you say yes here you get support for Texas Instruments TMP401,
> TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tmp401.
>
> config SENSORS_TMP421
> @@ -1702,7 +1702,7 @@ config SENSORS_TMP421
> If you say yes here you get support for Texas Instruments TMP421,
> TMP422, TMP423, TMP441, and TMP442 temperature sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called tmp421.
>
> config SENSORS_VEXPRESS
> @@ -1729,7 +1729,7 @@ config SENSORS_VIA686A
> If you say yes here you get support for the integrated sensors in
> Via 686A/B South Bridges.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called via686a.
>
> config SENSORS_VT1211
> @@ -1740,7 +1740,7 @@ config SENSORS_VT1211
> If you say yes here then you get support for hardware monitoring
> features of the VIA VT1211 Super-I/O chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called vt1211.
>
> config SENSORS_VT8231
> @@ -1751,7 +1751,7 @@ config SENSORS_VT8231
> If you say yes here then you get support for the integrated sensors
> in the VIA VT8231 device.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called vt8231.
>
> config SENSORS_W83773G
> @@ -1761,7 +1761,7 @@ config SENSORS_W83773G
> If you say yes here you get support for the Nuvoton W83773G hardware
> monitoring chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83773g.
>
> config SENSORS_W83781D
> @@ -1773,7 +1773,7 @@ config SENSORS_W83781D
> of sensor chips: the W83781D, W83782D and W83783S, and the similar
> Asus AS99127F.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83781d.
>
> config SENSORS_W83791D
> @@ -1783,7 +1783,7 @@ config SENSORS_W83791D
> help
> If you say yes here you get support for the Winbond W83791D chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83791d.
>
> config SENSORS_W83792D
> @@ -1792,7 +1792,7 @@ config SENSORS_W83792D
> help
> If you say yes here you get support for the Winbond W83792D chip.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83792d.
>
> config SENSORS_W83793
> @@ -1804,7 +1804,7 @@ config SENSORS_W83793
> hardware monitoring chip, including support for the integrated
> watchdog.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83793.
>
> config SENSORS_W83795
> @@ -1815,7 +1815,7 @@ config SENSORS_W83795
> W83795ADG hardware monitoring chip, including manual fan speed
> control.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83795.
>
> config SENSORS_W83795_FANCTRL
> @@ -1842,7 +1842,7 @@ config SENSORS_W83L785TS
> sensor chip, which is used on the Asus A7N8X, among other
> motherboards.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83l785ts.
>
> config SENSORS_W83L786NG
> @@ -1852,7 +1852,7 @@ config SENSORS_W83L786NG
> If you say yes here you get support for the Winbond W83L786NG
> and W83L786NR sensor chips.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83l786ng.
>
> config SENSORS_W83627HF
> @@ -1864,7 +1864,7 @@ config SENSORS_W83627HF
> of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
> W83697HF.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83627hf.
>
> config SENSORS_W83627EHF
> @@ -1884,7 +1884,7 @@ config SENSORS_W83627EHF
> This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
> (also known as W83667HG-I), and NCT6776F.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called w83627ehf.
>
> config SENSORS_WM831X
> @@ -1895,7 +1895,7 @@ config SENSORS_WM831X
> monitoring functionality of the Wolfson Microelectronics
> WM831x series of PMICs.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called wm831x-hwmon.
>
> config SENSORS_WM8350
> @@ -1905,7 +1905,7 @@ config SENSORS_WM8350
> If you say yes here you get support for the hardware
> monitoring features of the WM835x series of PMICs.
>
> - This driver can also be built as a module. If so, the module
> + This driver can also be built as a module. If so, the module
> will be called wm8350-hwmon.
>
> config SENSORS_ULTRA45
On Thu, 2018-11-29 at 20:09 +0000, Corentin Labbe wrote:
> This patch remove extra space after a dot.
[]
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
---
> drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
> 1 file changed, 118 insertions(+), 118 deletions(-)
[]
> @@ -11,7 +11,7 @@ menuconfig HWMON
> of a system. Most modern motherboards include such a device. It
> can include temperature sensors, voltage sensors, fan speed
> sensors and various additional features such as the ability to
> - control the speed of the fans. If you want this support you
> + control the speed of the fans. If you want this support you
> should say Y here and also to the specific driver(s) for your
> sensors chip(s) below.
Please no.
You can't pry two spaces after a period when using a
fixed width font from me.
And the use is nowhere consistent in the kernel as it's
less than 2:1 in favor of one style over the other.
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' | wc -l
146888
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' | wc -l
85195
The kernel Kconfig use ratio is similar.
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- '*/Kconfig*' | wc -l
5389
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- '*/Kconfig*' | wc -l
2463
And even in this specific file, it's reversed ratio
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- 'drivers/hwmon/Kconfig*' | wc -l
70
$ git grep -i '[a-z][a-z]\. [a-z][a-z ]' -- 'drivers/hwmon/Kconfig*' | wc -l
129
So if you _really_ wanted to do this, please do the
entire file consistently.
You seemed to do 118 conversions. Shouldn't there be 129?
On 12/1/18 12:27 PM, Joe Perches wrote:
> On Thu, 2018-11-29 at 20:09 +0000, Corentin Labbe wrote:
>> This patch remove extra space after a dot.
> []
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> ---
>> drivers/hwmon/Kconfig | 236 +++++++++++++++++++++---------------------
>> 1 file changed, 118 insertions(+), 118 deletions(-)
> []
>> @@ -11,7 +11,7 @@ menuconfig HWMON
>> of a system. Most modern motherboards include such a device. It
>> can include temperature sensors, voltage sensors, fan speed
>> sensors and various additional features such as the ability to
>> - control the speed of the fans. If you want this support you
>> + control the speed of the fans. If you want this support you
>> should say Y here and also to the specific driver(s) for your
>> sensors chip(s) below.
>
> Please no.
Ack. No need for such a patch.
--
~Randy