The goal of this patch-set is to propose a driver for the STPMIC1 PMIC from
STMicroelectronics.
The STPMIC1 regulators supply power to an application processor as well as
to external system peripherals such as DDR, Flash memories and system
devices. It also features onkey button input and an hardware watchdog.
The STPMIC1 is controlled via I2C.
Main driver is drivers/mfd/stpmic1 that handle I2C regmap configuration and
irqchip. stpmic1_regulator, stpmic1_onkey and stpmic1_wdt need stpmic1 mfd
as parent.
STPMIC1 MFD and regulator drivers maybe mandatory at boot time.
Pascal Paillet (6):
dt-bindings: mfd: document stpmic1
mfd: stpmic1: add stpmic1 driver
dt-bindings: input: document stpmic1 pmic onkey
input: stpmic1: add stpmic1 onkey driver
dt-bindings: watchdog: document stpmic1 pmic watchdog
watchdog: stpmic1: add stpmic1 watchdog driver
.../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 +++
.../devicetree/bindings/mfd/st,stpmic1.txt | 61 ++++++
.../bindings/watchdog/st,stpmic1-wdt.txt | 11 ++
drivers/input/misc/Kconfig | 11 ++
drivers/input/misc/Makefile | 2 +
drivers/input/misc/stpmic1_onkey.c | 198 +++++++++++++++++++
drivers/mfd/Kconfig | 16 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/stpmic1.c | 213 +++++++++++++++++++++
drivers/watchdog/Kconfig | 12 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/stpmic1_wdt.c | 139 ++++++++++++++
include/dt-bindings/mfd/st,stpmic1.h | 50 +++++
include/linux/mfd/stpmic1.h | 212 ++++++++++++++++++++
14 files changed, 955 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
create mode 100644 drivers/input/misc/stpmic1_onkey.c
create mode 100644 drivers/mfd/stpmic1.c
create mode 100644 drivers/watchdog/stpmic1_wdt.c
create mode 100644 include/dt-bindings/mfd/st,stpmic1.h
create mode 100644 include/linux/mfd/stpmic1.h
--
1.9.1
The stpmic1 PMIC embeds a watchdog which is disabled by default.
In case of watchdog, the PMIC goes off.
Signed-off-by: Pascal Paillet <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
---
changes in v8: nothing
Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
new file mode 100644
index 0000000..7cc1407
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt
@@ -0,0 +1,11 @@
+STMicroelectronics STPMIC1 Watchdog
+
+Required properties:
+
+- compatible : should be "st,stpmic1-wdt"
+
+Example:
+
+watchdog {
+ compatible = "st,stpmic1-wdt";
+};
--
1.9.1
The stpmic1 PMIC embeds a watchdog which is disabled by default. As soon
as the watchdog is started, it must be refreshed periodically otherwise
the PMIC goes off.
Signed-off-by: Pascal Paillet <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
---
changes in v8: nothing
drivers/watchdog/Kconfig | 12 ++++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/stpmic1_wdt.c | 139 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 152 insertions(+)
create mode 100644 drivers/watchdog/stpmic1_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2d64333..cc5155b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -817,6 +817,18 @@ config STM32_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called stm32_iwdg.
+config STPMIC1_WATCHDOG
+ tristate "STPMIC1 PMIC watchdog support"
+ depends on MFD_STPMIC1
+ select WATCHDOG_CORE
+ help
+ Say Y here to include watchdog support embedded into STPMIC1 PMIC.
+ If the watchdog timer expires, stpmic1 will shut down all its power
+ supplies.
+
+ To compile this driver as a module, choose M here: the
+ module will be called spmic1_wdt.
+
config UNIPHIER_WATCHDOG
tristate "UniPhier watchdog support"
depends on ARCH_UNIPHIER || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f69cdff..bdc072c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -218,3 +218,4 @@ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
+obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o
diff --git a/drivers/watchdog/stpmic1_wdt.c b/drivers/watchdog/stpmic1_wdt.c
new file mode 100644
index 0000000..ad431d8
--- /dev/null
+++ b/drivers/watchdog/stpmic1_wdt.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <[email protected]> for STMicroelectronics.
+
+#include <linux/kernel.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+/* WATCHDOG CONTROL REGISTER bit */
+#define WDT_START BIT(0)
+#define WDT_PING BIT(1)
+#define WDT_START_MASK BIT(0)
+#define WDT_PING_MASK BIT(1)
+#define WDT_STOP 0
+
+#define PMIC_WDT_MIN_TIMEOUT 1
+#define PMIC_WDT_MAX_TIMEOUT 256
+#define PMIC_WDT_DEFAULT_TIMEOUT 30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct stpmic1_wdt {
+ struct stpmic1 *pmic;
+ struct watchdog_device wdtdev;
+};
+
+static int pmic_wdt_start(struct watchdog_device *wdd)
+{
+ struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ return regmap_update_bits(wdt->pmic->regmap,
+ WCHDG_CR, WDT_START_MASK, WDT_START);
+}
+
+static int pmic_wdt_stop(struct watchdog_device *wdd)
+{
+ struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ return regmap_update_bits(wdt->pmic->regmap,
+ WCHDG_CR, WDT_START_MASK, WDT_STOP);
+}
+
+static int pmic_wdt_ping(struct watchdog_device *wdd)
+{
+ struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ return regmap_update_bits(wdt->pmic->regmap,
+ WCHDG_CR, WDT_PING_MASK, WDT_PING);
+}
+
+static int pmic_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ wdd->timeout = timeout;
+ /* timeout is equal to register value + 1 */
+ return regmap_write(wdt->pmic->regmap, WCHDG_TIMER_CR, timeout - 1);
+}
+
+static const struct watchdog_info pmic_watchdog_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "STPMIC1 PMIC Watchdog",
+};
+
+static const struct watchdog_ops pmic_watchdog_ops = {
+ .owner = THIS_MODULE,
+ .start = pmic_wdt_start,
+ .stop = pmic_wdt_stop,
+ .ping = pmic_wdt_ping,
+ .set_timeout = pmic_wdt_set_timeout,
+};
+
+static int pmic_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct stpmic1 *pmic;
+ struct stpmic1_wdt *wdt;
+
+ if (!pdev->dev.parent)
+ return -EINVAL;
+
+ pmic = dev_get_drvdata(pdev->dev.parent);
+ if (!pmic)
+ return -EINVAL;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(struct stpmic1_wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ wdt->pmic = pmic;
+
+ wdt->wdtdev.info = &pmic_watchdog_info;
+ wdt->wdtdev.ops = &pmic_watchdog_ops;
+ wdt->wdtdev.min_timeout = PMIC_WDT_MIN_TIMEOUT;
+ wdt->wdtdev.max_timeout = PMIC_WDT_MAX_TIMEOUT;
+ wdt->wdtdev.parent = &pdev->dev;
+
+ wdt->wdtdev.timeout = PMIC_WDT_DEFAULT_TIMEOUT;
+ watchdog_init_timeout(&wdt->wdtdev, 0, &pdev->dev);
+
+ watchdog_set_nowayout(&wdt->wdtdev, nowayout);
+ watchdog_set_drvdata(&wdt->wdtdev, wdt);
+
+ ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev);
+ if (ret)
+ return ret;
+
+ dev_dbg(wdt->pmic->dev, "PMIC Watchdog driver probed\n");
+ return 0;
+}
+
+static const struct of_device_id of_pmic_wdt_match[] = {
+ { .compatible = "st,stpmic1-wdt" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_pmic_wdt_match);
+
+static struct platform_driver stpmic1_wdt_driver = {
+ .probe = pmic_wdt_probe,
+ .driver = {
+ .name = "stpmic1-wdt",
+ .of_match_table = of_pmic_wdt_match,
+ },
+};
+module_platform_driver(stpmic1_wdt_driver);
+
+MODULE_DESCRIPTION("Watchdog driver for STPMIC1 device");
+MODULE_AUTHOR("Pascal Paillet <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
---
changes in v8: nothing
drivers/mfd/Kconfig | 16 ++++
drivers/mfd/Makefile | 1 +
drivers/mfd/stpmic1.c | 213 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/stpmic1.h | 212 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 442 insertions(+)
create mode 100644 drivers/mfd/stpmic1.c
create mode 100644 include/linux/mfd/stpmic1.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 8c5dfdc..0761cb8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1871,6 +1871,22 @@ config MFD_STM32_TIMERS
for PWM and IIO Timer. This driver allow to share the
registers between the others drivers.
+config MFD_STPMIC1
+ tristate "Support for STPMIC1 PMIC"
+ depends on (I2C=y && OF)
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ select MFD_CORE
+ help
+ Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
+ key, watchdog and regulator functionalities which are supported via
+ the relevant subsystems. This driver provides core support for the
+ STPMIC1. In order to use the actual functionaltiy of the device other
+ drivers must be enabled.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stpmic1.
+
menu "Multimedia Capabilities Port drivers"
depends on ARCH_SA1100
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 12980a4..a62fb01 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -233,6 +233,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
+obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
new file mode 100644
index 0000000..7dfbe89
--- /dev/null
+++ b/drivers/mfd/stpmic1.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <[email protected]>
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+#define STPMIC1_MAIN_IRQ 0
+
+static const struct regmap_range stpmic1_readable_ranges[] = {
+ regmap_reg_range(TURN_ON_SR, VERSION_SR),
+ regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
+ regmap_reg_range(BST_SW_CR, BST_SW_CR),
+ regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
+ regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
+ regmap_reg_range(INT_MASK_R1, INT_MASK_R4),
+ regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
+ regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
+ regmap_reg_range(INT_SRC_R1, INT_SRC_R1),
+};
+
+static const struct regmap_range stpmic1_writeable_ranges[] = {
+ regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
+ regmap_reg_range(BST_SW_CR, BST_SW_CR),
+ regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
+ regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
+ regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
+};
+
+static const struct regmap_range stpmic1_volatile_ranges[] = {
+ regmap_reg_range(TURN_ON_SR, VERSION_SR),
+ regmap_reg_range(WCHDG_CR, WCHDG_CR),
+ regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
+ regmap_reg_range(INT_SRC_R1, INT_SRC_R4),
+};
+
+static const struct regmap_access_table stpmic1_readable_table = {
+ .yes_ranges = stpmic1_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges),
+};
+
+static const struct regmap_access_table stpmic1_writeable_table = {
+ .yes_ranges = stpmic1_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges),
+};
+
+static const struct regmap_access_table stpmic1_volatile_table = {
+ .yes_ranges = stpmic1_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges),
+};
+
+const struct regmap_config stpmic1_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .max_register = PMIC_MAX_REGISTER_ADDRESS,
+ .rd_table = &stpmic1_readable_table,
+ .wr_table = &stpmic1_writeable_table,
+ .volatile_table = &stpmic1_volatile_table,
+};
+
+static const struct regmap_irq stpmic1_irqs[] = {
+ REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01),
+ REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02),
+ REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04),
+ REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08),
+ REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10),
+ REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20),
+ REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40),
+ REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80),
+
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01),
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02),
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04),
+ REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08),
+ REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10),
+ REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20),
+ REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40),
+ REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80),
+
+ REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10),
+ REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20),
+ REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40),
+ REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80),
+
+ REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01),
+ REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02),
+ REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04),
+ REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08),
+ REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40),
+ REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80),
+};
+
+static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
+ .name = "pmic_irq",
+ .status_base = INT_PENDING_R1,
+ .mask_base = INT_CLEAR_MASK_R1,
+ .unmask_base = INT_SET_MASK_R1,
+ .ack_base = INT_CLEAR_R1,
+ .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS,
+ .irqs = stpmic1_irqs,
+ .num_irqs = ARRAY_SIZE(stpmic1_irqs),
+};
+
+static int stpmic1_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct stpmic1 *ddata;
+ struct device *dev = &i2c->dev;
+ int ret;
+ struct device_node *np = dev->of_node;
+ u32 reg;
+
+ ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, ddata);
+ ddata->dev = dev;
+
+ ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config);
+ if (IS_ERR(ddata->regmap))
+ return PTR_ERR(ddata->regmap);
+
+ ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ);
+ if (ddata->irq < 0) {
+ dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq);
+ return ddata->irq;
+ }
+
+ ret = regmap_read(ddata->regmap, VERSION_SR, ®);
+ if (ret) {
+ dev_err(dev, "Unable to read PMIC version\n");
+ return ret;
+ }
+ dev_info(dev, "PMIC Chip Version: 0x%x\n", reg);
+
+ /* Initialize PMIC IRQ Chip & associated IRQ domains */
+ ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq,
+ IRQF_ONESHOT | IRQF_SHARED,
+ 0, &stpmic1_regmap_irq_chip,
+ &ddata->irq_data);
+ if (ret) {
+ dev_err(dev, "IRQ Chip registration failed: %d\n", ret);
+ return ret;
+ }
+
+ return devm_of_platform_populate(dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stpmic1_suspend(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
+
+ disable_irq(pmic_dev->irq);
+
+ return 0;
+}
+
+static int stpmic1_resume(struct device *dev)
+{
+ struct i2c_client *i2c = to_i2c_client(dev);
+ struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
+ int ret;
+
+ ret = regcache_sync(pmic_dev->regmap);
+ if (ret)
+ return ret;
+
+ enable_irq(pmic_dev->irq);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume);
+
+static const struct of_device_id stpmic1_of_match[] = {
+ { .compatible = "st,stpmic1", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, stpmic1_of_match);
+
+static struct i2c_driver stpmic1_driver = {
+ .driver = {
+ .name = "stpmic1",
+ .of_match_table = of_match_ptr(stpmic1_of_match),
+ .pm = &stpmic1_pm,
+ },
+ .probe = stpmic1_probe,
+};
+
+module_i2c_driver(stpmic1_driver);
+
+MODULE_DESCRIPTION("STPMIC1 PMIC Driver");
+MODULE_AUTHOR("Pascal Paillet <[email protected]>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h
new file mode 100644
index 0000000..fa3f99f
--- /dev/null
+++ b/include/linux/mfd/stpmic1.h
@@ -0,0 +1,212 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <[email protected]>,
+ * Pascal Paillet <[email protected]> for STMicroelectronics.
+ */
+
+#ifndef __LINUX_MFD_STPMIC1_H
+#define __LINUX_MFD_STPMIC1_H
+
+#define TURN_ON_SR 0x1
+#define TURN_OFF_SR 0x2
+#define ICC_LDO_TURN_OFF_SR 0x3
+#define ICC_BUCK_TURN_OFF_SR 0x4
+#define RREQ_STATE_SR 0x5
+#define VERSION_SR 0x6
+
+#define SWOFF_PWRCTRL_CR 0x10
+#define PADS_PULL_CR 0x11
+#define BUCKS_PD_CR 0x12
+#define LDO14_PD_CR 0x13
+#define LDO56_VREF_PD_CR 0x14
+#define VBUS_DET_VIN_CR 0x15
+#define PKEY_TURNOFF_CR 0x16
+#define BUCKS_MASK_RANK_CR 0x17
+#define BUCKS_MASK_RESET_CR 0x18
+#define LDOS_MASK_RANK_CR 0x19
+#define LDOS_MASK_RESET_CR 0x1A
+#define WCHDG_CR 0x1B
+#define WCHDG_TIMER_CR 0x1C
+#define BUCKS_ICCTO_CR 0x1D
+#define LDOS_ICCTO_CR 0x1E
+
+#define BUCK1_ACTIVE_CR 0x20
+#define BUCK2_ACTIVE_CR 0x21
+#define BUCK3_ACTIVE_CR 0x22
+#define BUCK4_ACTIVE_CR 0x23
+#define VREF_DDR_ACTIVE_CR 0x24
+#define LDO1_ACTIVE_CR 0x25
+#define LDO2_ACTIVE_CR 0x26
+#define LDO3_ACTIVE_CR 0x27
+#define LDO4_ACTIVE_CR 0x28
+#define LDO5_ACTIVE_CR 0x29
+#define LDO6_ACTIVE_CR 0x2A
+
+#define BUCK1_STDBY_CR 0x30
+#define BUCK2_STDBY_CR 0x31
+#define BUCK3_STDBY_CR 0x32
+#define BUCK4_STDBY_CR 0x33
+#define VREF_DDR_STDBY_CR 0x34
+#define LDO1_STDBY_CR 0x35
+#define LDO2_STDBY_CR 0x36
+#define LDO3_STDBY_CR 0x37
+#define LDO4_STDBY_CR 0x38
+#define LDO5_STDBY_CR 0x39
+#define LDO6_STDBY_CR 0x3A
+
+#define BST_SW_CR 0x40
+
+#define INT_PENDING_R1 0x50
+#define INT_PENDING_R2 0x51
+#define INT_PENDING_R3 0x52
+#define INT_PENDING_R4 0x53
+
+#define INT_DBG_LATCH_R1 0x60
+#define INT_DBG_LATCH_R2 0x61
+#define INT_DBG_LATCH_R3 0x62
+#define INT_DBG_LATCH_R4 0x63
+
+#define INT_CLEAR_R1 0x70
+#define INT_CLEAR_R2 0x71
+#define INT_CLEAR_R3 0x72
+#define INT_CLEAR_R4 0x73
+
+#define INT_MASK_R1 0x80
+#define INT_MASK_R2 0x81
+#define INT_MASK_R3 0x82
+#define INT_MASK_R4 0x83
+
+#define INT_SET_MASK_R1 0x90
+#define INT_SET_MASK_R2 0x91
+#define INT_SET_MASK_R3 0x92
+#define INT_SET_MASK_R4 0x93
+
+#define INT_CLEAR_MASK_R1 0xA0
+#define INT_CLEAR_MASK_R2 0xA1
+#define INT_CLEAR_MASK_R3 0xA2
+#define INT_CLEAR_MASK_R4 0xA3
+
+#define INT_SRC_R1 0xB0
+#define INT_SRC_R2 0xB1
+#define INT_SRC_R3 0xB2
+#define INT_SRC_R4 0xB3
+
+#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4
+
+#define STPMIC1_PMIC_NUM_IRQ_REGS 4
+
+#define TURN_OFF_SR_ICC_EVENT 0x08
+
+#define LDO_VOLTAGE_MASK GENMASK(6, 2)
+#define BUCK_VOLTAGE_MASK GENMASK(7, 2)
+#define LDO_BUCK_VOLTAGE_SHIFT 2
+
+#define LDO_ENABLE_MASK BIT(0)
+#define BUCK_ENABLE_MASK BIT(0)
+
+#define BUCK_HPLP_ENABLE_MASK BIT(1)
+#define BUCK_HPLP_SHIFT 1
+
+#define STDBY_ENABLE_MASK BIT(0)
+
+#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0)
+#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0)
+#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0)
+#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0)
+#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0)
+#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0)
+#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0)
+
+#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK1_PULL_DOWN_MASK BIT(0)
+#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK2_PULL_DOWN_MASK BIT(2)
+#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK3_PULL_DOWN_MASK BIT(4)
+#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR
+#define BUCK4_PULL_DOWN_MASK BIT(6)
+
+#define LDO1_PULL_DOWN_REG LDO14_PD_CR
+#define LDO1_PULL_DOWN_MASK BIT(0)
+#define LDO2_PULL_DOWN_REG LDO14_PD_CR
+#define LDO2_PULL_DOWN_MASK BIT(2)
+#define LDO3_PULL_DOWN_REG LDO14_PD_CR
+#define LDO3_PULL_DOWN_MASK BIT(4)
+#define LDO4_PULL_DOWN_REG LDO14_PD_CR
+#define LDO4_PULL_DOWN_MASK BIT(6)
+#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define LDO5_PULL_DOWN_MASK BIT(0)
+#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define LDO6_PULL_DOWN_MASK BIT(2)
+#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR
+#define VREF_DDR_PULL_DOWN_MASK BIT(4)
+
+#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0)
+#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0)
+
+#define LDO_BYPASS_MASK BIT(7)
+
+/* Main PMIC Control Register
+ * SWOFF_PWRCTRL_CR
+ * Address : 0x10
+ */
+#define ICC_EVENT_ENABLED BIT(4)
+#define PWRCTRL_POLARITY_HIGH BIT(3)
+#define PWRCTRL_PIN_VALID BIT(2)
+#define RESTART_REQUEST_ENABLED BIT(1)
+#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0)
+
+/* Main PMIC PADS Control Register
+ * PADS_PULL_CR
+ * Address : 0x11
+ */
+#define WAKEUP_DETECTOR_DISABLED BIT(4)
+#define PWRCTRL_PD_ACTIVE BIT(3)
+#define PWRCTRL_PU_ACTIVE BIT(2)
+#define WAKEUP_PD_ACTIVE BIT(1)
+#define PONKEY_PU_INACTIVE BIT(0)
+
+/* Main PMIC VINLOW Control Register
+ * VBUS_DET_VIN_CRC DMSC
+ * Address : 0x15
+ */
+#define SWIN_DETECTOR_ENABLED BIT(7)
+#define SWOUT_DETECTOR_ENABLED BIT(6)
+#define VINLOW_ENABLED BIT(0)
+#define VINLOW_CTRL_REG_MASK GENMASK(7, 0)
+
+/* USB Control Register
+ * Address : 0x40
+ */
+#define BOOST_OVP_DISABLED BIT(7)
+#define VBUS_OTG_DETECTION_DISABLED BIT(6)
+#define SW_OUT_DISCHARGE BIT(5)
+#define VBUS_OTG_DISCHARGE BIT(4)
+#define OCP_LIMIT_HIGH BIT(3)
+#define SWIN_SWOUT_ENABLED BIT(2)
+#define USBSW_OTG_SWITCH_ENABLED BIT(1)
+#define BOOST_ENABLED BIT(0)
+
+/* PKEY_TURNOFF_CR
+ * Address : 0x16
+ */
+#define PONKEY_PWR_OFF BIT(7)
+#define PONKEY_CC_FLAG_CLEAR BIT(6)
+#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0)
+#define PONKEY_TURNOFF_MASK GENMASK(7, 0)
+
+/*
+ * struct stpmic1 - stpmic1 master device for sub-drivers
+ * @dev: master device of the chip (can be used to access platform data)
+ * @irq: main IRQ number
+ * @regmap_irq_chip_data: irq chip data
+ */
+struct stpmic1 {
+ struct device *dev;
+ struct regmap *regmap;
+ int irq;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+#endif /* __LINUX_MFD_STPMIC1_H */
--
1.9.1
The stpmic1 pmic is able to manage an onkey button. This driver exposes
the stpmic1 onkey as an input device. It can also be configured to
shut-down the power supplies on a long key-press with an adjustable
duration.
Signed-off-by: Pascal Paillet <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]>
---
changes in v8: nothing
drivers/input/misc/Kconfig | 11 +++
drivers/input/misc/Makefile | 2 +
drivers/input/misc/stpmic1_onkey.c | 198 +++++++++++++++++++++++++++++++++++++
3 files changed, 211 insertions(+)
create mode 100644 drivers/input/misc/stpmic1_onkey.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ca59a2b..279fb02 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
To compile this driver as a module, choose M here. The module will
be called sc27xx_vibra.
+config INPUT_STPMIC1_ONKEY
+ tristate "STPMIC1 PMIC Onkey support"
+ depends on MFD_STPMIC1
+ help
+ Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
+ can be used to wakeup from low power modes and force a shut-down on
+ long press.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stpmic1_onkey.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 9d0f9d1..1b44202 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY) += soc_button_array.o
obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
+obj-$(CONFIG_INPUT_STPMIC1_ONKEY) += stpmic1_onkey.o
obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON) += tps65218-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_TWL4030_VIBRA) += twl4030-vibra.o
@@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR) += ideapad_slidebar.o
+
diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c
new file mode 100644
index 0000000..7b49c99
--- /dev/null
+++ b/drivers/input/misc/stpmic1_onkey.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <[email protected]> for STMicroelectronics.
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/**
+ * struct stpmic1_onkey - OnKey data
+ * @input_dev: pointer to input device
+ * @irq_falling: irq that we are hooked on to
+ * @irq_rising: irq that we are hooked on to
+ */
+struct stpmic1_onkey {
+ struct input_dev *input_dev;
+ int irq_falling;
+ int irq_rising;
+};
+
+static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
+{
+ struct stpmic1_onkey *onkey = ponkey;
+ struct input_dev *input_dev = onkey->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 1);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
+{
+ struct stpmic1_onkey *onkey = ponkey;
+ struct input_dev *input_dev = onkey->input_dev;
+
+ input_report_key(input_dev, KEY_POWER, 0);
+ pm_wakeup_event(input_dev->dev.parent, 0);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+static int stpmic1_onkey_probe(struct platform_device *pdev)
+{
+ struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
+ struct device *dev = &pdev->dev;
+ struct input_dev *input_dev;
+ struct stpmic1_onkey *onkey;
+ unsigned int val, reg = 0;
+ int error;
+
+ onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+ if (!onkey)
+ return -ENOMEM;
+
+ onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
+ if (onkey->irq_falling < 0) {
+ dev_err(dev, "failed: request IRQ onkey-falling %d\n",
+ onkey->irq_falling);
+ return onkey->irq_falling;
+ }
+
+ onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
+ if (onkey->irq_rising < 0) {
+ dev_err(dev, "failed: request IRQ onkey-rising %d\n",
+ onkey->irq_rising);
+ return onkey->irq_rising;
+ }
+
+ if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
+ if (val > 0 && val <= 16) {
+ dev_dbg(dev, "power-off-time=%d seconds\n", val);
+ reg |= PONKEY_PWR_OFF;
+ reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK);
+ } else {
+ dev_err(dev, "power-off-time-sec out of range\n");
+ return -EINVAL;
+ }
+ }
+
+ if (device_property_present(dev, "st,onkey-clear-cc-flag"))
+ reg |= PONKEY_CC_FLAG_CLEAR;
+
+ error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
+ PONKEY_TURNOFF_MASK, reg);
+ if (error) {
+ dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error);
+ return error;
+ }
+
+ if (device_property_present(dev, "st,onkey-pu-inactive")) {
+ error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
+ PONKEY_PU_INACTIVE,
+ PONKEY_PU_INACTIVE);
+ if (error) {
+ dev_err(dev, "ONKEY Pads configuration failed: %d\n",
+ error);
+ return error;
+ }
+ }
+
+ input_dev = devm_input_allocate_device(dev);
+ if (!input_dev) {
+ dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
+ return -ENOMEM;
+ }
+
+ input_dev->name = "pmic_onkey";
+ input_dev->phys = "pmic_onkey/input0";
+
+ input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+ onkey->input_dev = input_dev;
+
+ /* interrupt is nested in a thread */
+ error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
+ onkey_falling_irq, IRQF_ONESHOT,
+ dev_name(dev), onkey);
+ if (error) {
+ dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
+ return error;
+ }
+
+ error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
+ onkey_rising_irq, IRQF_ONESHOT,
+ dev_name(dev), onkey);
+ if (error) {
+ dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
+ return error;
+ }
+
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(dev, "Can't register power button: %d\n", error);
+ return error;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+ device_init_wakeup(dev, true);
+
+ return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev)) {
+ enable_irq_wake(onkey->irq_falling);
+ enable_irq_wake(onkey->irq_rising);
+ }
+ return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(dev)) {
+ disable_irq_wake(onkey->irq_falling);
+ disable_irq_wake(onkey->irq_rising);
+ }
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
+ stpmic1_onkey_suspend,
+ stpmic1_onkey_resume);
+
+static const struct of_device_id of_stpmic1_onkey_match[] = {
+ { .compatible = "st,stpmic1-onkey" },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
+
+static struct platform_driver stpmic1_onkey_driver = {
+ .probe = stpmic1_onkey_probe,
+ .driver = {
+ .name = "stpmic1_onkey",
+ .of_match_table = of_match_ptr(of_stpmic1_onkey_match),
+ .pm = &stpmic1_onkey_pm,
+ },
+};
+module_platform_driver(stpmic1_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for STPMIC1");
+MODULE_AUTHOR("Pascal Paillet <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
1.9.1
The stpmic1 pmic is able to manage an onkey button. It can be configured
to shut-down the power supplies on a long key-press with an adjustable
duration.
Signed-off-by: Pascal Paillet <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
changes in v8: nothing
.../devicetree/bindings/input/st,stpmic1-onkey.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
diff --git a/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
new file mode 100644
index 0000000..4494613
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt
@@ -0,0 +1,28 @@
+STMicroelectronics STPMIC1 Onkey
+
+Required properties:
+
+- compatible = "st,stpmic1-onkey";
+- interrupts: interrupt line to use
+- interrupt-names = "onkey-falling", "onkey-rising"
+ onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
+ onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
+
+Optional properties:
+
+- st,onkey-clear-cc-flag: onkey is able power on after an
+ over-current shutdown event.
+- st,onkey-pu-inactive: onkey pull up is not active
+- power-off-time-sec: Duration in seconds which the key should be kept
+ pressed for device to power off automatically (from 1 to 16 seconds).
+ see See Documentation/devicetree/bindings/input/keys.txt
+
+Example:
+
+onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupt-parent = <&pmic>;
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+};
--
1.9.1
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Acked-for-MFD-by: Lee Jones <[email protected]>
---
changes in v8: nothing
.../devicetree/bindings/mfd/st,stpmic1.txt | 61 ++++++++++++++++++++++
include/dt-bindings/mfd/st,stpmic1.h | 50 ++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt
create mode 100644 include/dt-bindings/mfd/st,stpmic1.h
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
new file mode 100644
index 0000000..afd45c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt
@@ -0,0 +1,61 @@
+* STMicroelectronics STPMIC1 Power Management IC
+
+Required properties:
+- compatible: : "st,stpmic1"
+- reg: : The I2C slave address for the STPMIC1 chip.
+- interrupts: : The interrupt line the device is connected to.
+- #interrupt-cells: : Should be 1.
+- interrupt-controller: : Marks the device node as an interrupt controller.
+ Interrupt numbers are defined at
+ dt-bindings/mfd/st,stpmic1.h.
+
+STPMIC1 consists in a varied group of sub-devices.
+Each sub-device binding is be described in own documentation file.
+
+Device Description
+------ ------------
+st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt
+st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt
+st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt
+
+Example:
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+pmic: pmic@33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupt-parent = <&gpioa>;
+ interrupts = <0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ };
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+
+ vdd_core: buck1 {
+ regulator-name = "vdd_core";
+ regulator-boot-on;
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-pull-down;
+ };
+ };
diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h
new file mode 100644
index 0000000..321cd087
--- /dev/null
+++ b/include/dt-bindings/mfd/st,stpmic1.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <[email protected]>,
+ * Pascal Paillet <[email protected]> for STMicroelectronics.
+ */
+
+#ifndef __DT_BINDINGS_STPMIC1_H__
+#define __DT_BINDINGS_STPMIC1_H__
+
+/* IRQ definitions */
+#define IT_PONKEY_F 0
+#define IT_PONKEY_R 1
+#define IT_WAKEUP_F 2
+#define IT_WAKEUP_R 3
+#define IT_VBUS_OTG_F 4
+#define IT_VBUS_OTG_R 5
+#define IT_SWOUT_F 6
+#define IT_SWOUT_R 7
+
+#define IT_CURLIM_BUCK1 8
+#define IT_CURLIM_BUCK2 9
+#define IT_CURLIM_BUCK3 10
+#define IT_CURLIM_BUCK4 11
+#define IT_OCP_OTG 12
+#define IT_OCP_SWOUT 13
+#define IT_OCP_BOOST 14
+#define IT_OVP_BOOST 15
+
+#define IT_CURLIM_LDO1 16
+#define IT_CURLIM_LDO2 17
+#define IT_CURLIM_LDO3 18
+#define IT_CURLIM_LDO4 19
+#define IT_CURLIM_LDO5 20
+#define IT_CURLIM_LDO6 21
+#define IT_SHORT_SWOTG 22
+#define IT_SHORT_SWOUT 23
+
+#define IT_TWARN_F 24
+#define IT_TWARN_R 25
+#define IT_VINLOW_F 26
+#define IT_VINLOW_R 27
+#define IT_SWIN_F 30
+#define IT_SWIN_R 31
+
+/* BUCK MODES definitions */
+#define STPMIC1_BUCK_MODE_NORMAL 0
+#define STPMIC1_BUCK_MODE_LP 2
+
+#endif /* __DT_BINDINGS_STPMIC1_H__ */
--
1.9.1