2019-03-29 12:44:36

by Yannick FERTRE

Subject: [PATCH v1 0/2] add cec pins muxing

Add cec pins muxing

Yannick Fertré (2):
ARM: dts: stm32: add cec pins muxing on stm32mp157
ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

--
2.7.4

2019-03-29 12:43:32

by Yannick FERTRE

Subject: [PATCH v1 2/2] ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c

Add sleep pinctrl for cec on stm32mp157c

Signed-off-by: Yannick Fertré <[email protected]>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 54fe2ad..4886a89 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -157,6 +157,12 @@
};
};

+ cec_pins_sleep_a: cec-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
cec_pins_b: cec-1 {
pins {
pinmux = <STM32_PINMUX('B', 6, AF5)>;
@@ -166,6 +172,12 @@
};
};

+ cec_pins_sleep_b: cec-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
--
2.7.4

2019-03-29 12:43:41

by Yannick FERTRE

Subject: [PATCH v1 1/2] ARM: dts: stm32: add cec pins muxing on stm32mp157

Add a new pin muxing for cec.

Signed-off-by: Yannick Fertré <[email protected]>
---
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
index 9104896..54fe2ad 100644
--- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
@@ -157,6 +157,15 @@
};
};

+ cec_pins_b: cec-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF5)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
ethernet0_rgmii_pins_a: rgmii-0 {
pins1 {
pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
--
2.7.4

2019-04-10 17:38:18

by Alexandre Torgue

Subject: Re: [PATCH v1 0/2] add cec pins muxing

Hi Yannick

On 3/29/19 1:41 PM, Yannick Fertré wrote:
> Add cec pins muxing
>
> Yannick Fertré (2):
> ARM: dts: stm32: add cec pins muxing on stm32mp157
> ARM: dts: stm32: add sleep pinctrl for cec on stm32mp157c
>
> arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>

Series applied on stm32-next. Note that I squashed the both patches
as they deal only with pins muxing group definition.

Regards
Alex