2019-07-01 11:52:08

by Yash Shah

Subject: [PATCH v2] riscv: ccache: Remove unused variable

Reading the count register clears the interrupt signal. Currently, the
count registers are read into 'regval' variable but the variable is
never used. Therefore remove it. V2 of this patch add comments to
justify the readl calls without checking the return value.

Signed-off-by: Yash Shah <[email protected]>
---
arch/riscv/mm/sifive_l2_cache.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/mm/sifive_l2_cache.c b/arch/riscv/mm/sifive_l2_cache.c
index 4eb6461..2e637ad 100644
--- a/arch/riscv/mm/sifive_l2_cache.c
+++ b/arch/riscv/mm/sifive_l2_cache.c
@@ -109,13 +109,14 @@ int unregister_sifive_l2_error_notifier(struct notifier_block *nb)

static irqreturn_t l2_int_handler(int irq, void *device)
{
- unsigned int regval, add_h, add_l;
+ unsigned int add_h, add_l;

if (irq == g_irq[DIR_CORR]) {
add_h = readl(l2_base + SIFIVE_L2_DIRECCFIX_HIGH);
add_l = readl(l2_base + SIFIVE_L2_DIRECCFIX_LOW);
pr_err("L2CACHE: DirError @ 0x%08X.%08X\n", add_h, add_l);
- regval = readl(l2_base + SIFIVE_L2_DIRECCFIX_COUNT);
+ /* Reading this register clears the DirError interrupt sig */
+ readl(l2_base + SIFIVE_L2_DIRECCFIX_COUNT);
atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
"DirECCFix");
}
@@ -123,7 +124,8 @@ static irqreturn_t l2_int_handler(int irq, void *device)
add_h = readl(l2_base + SIFIVE_L2_DATECCFIX_HIGH);
add_l = readl(l2_base + SIFIVE_L2_DATECCFIX_LOW);
pr_err("L2CACHE: DataError @ 0x%08X.%08X\n", add_h, add_l);
- regval = readl(l2_base + SIFIVE_L2_DATECCFIX_COUNT);
+ /* Reading this register clears the DataError interrupt sig */
+ readl(l2_base + SIFIVE_L2_DATECCFIX_COUNT);
atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
"DatECCFix");
}
@@ -131,7 +133,8 @@ static irqreturn_t l2_int_handler(int irq, void *device)
add_h = readl(l2_base + SIFIVE_L2_DATECCFAIL_HIGH);
add_l = readl(l2_base + SIFIVE_L2_DATECCFAIL_LOW);
pr_err("L2CACHE: DataFail @ 0x%08X.%08X\n", add_h, add_l);
- regval = readl(l2_base + SIFIVE_L2_DATECCFAIL_COUNT);
+ /* Reading this register clears the DataFail interrupt sig */
+ readl(l2_base + SIFIVE_L2_DATECCFAIL_COUNT);
atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE,
"DatECCFail");
}
--
1.9.1

2019-07-01 21:16:30

by Paul Walmsley

Subject: Re: [PATCH v2] riscv: ccache: Remove unused variable

On Mon, 1 Jul 2019, Yash Shah wrote:

> Reading the count register clears the interrupt signal. Currently, the
> count registers are read into 'regval' variable but the variable is
> never used. Therefore remove it. V2 of this patch add comments to
> justify the readl calls without checking the return value.
>
> Signed-off-by: Yash Shah <[email protected]>

Thanks, will try to queue this for v5.2-rc - otherwise, v5.3.


- Paul