Add "snps,configure-gfladj" boolean property to USB3 node. This property
is used to determine if frame length adjustment is required
Signed-off-by: Nikhil Badola <[email protected]>
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c70bb27..f03f842 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -404,6 +404,7 @@
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
+ snps,configure-fladj = <0x20>;
};
};
};
--
2.1.0
On Thursday 23 July 2015 15:42:58, Nikhil Badola wrote:
> Add "snps,configure-gfladj" boolean property to USB3 node. This property
^^^^^^
This does not match...
> is used to determine if frame length adjustment is required
>
> Signed-off-by: Nikhil Badola <[email protected]>
> ---
> arch/arm/boot/dts/ls1021a.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..f03f842 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -404,6 +404,7 @@
> reg = <0x0 0x3100000 0x0 0x10000>;
> interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> dr_mode = "host";
> + snps,configure-fladj = <0x20>;
^^^^^
...that. The same is for the subject. I guess these "gfladj" are just leftovers as patch 1 & 2 talk about "fladj"
Best regards,
Alexander
--
Dipl.-Inf. Alexander Stein
SYS TEC electronic GmbH
[email protected]
Legal and Commercial Address:
Am Windrad 2
08468 Heinsdorfergrund
Germany
Office: +49 (0) 3765 38600-0
Fax: +49 (0) 3765 38600-4100
Managing Directors:
Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
Commercial Registry:
Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010
> -----Original Message-----
> From: Alexander Stein [mailto:[email protected]]
> Sent: Thursday, July 23, 2015 3:41 PM
> To: Badola Nikhil-B46172
> Cc: [email protected]; [email protected];
> [email protected]
> Subject: Re: [PATCH 3/3] arm: dts: ls1021a: Add snps,configure-gfladj
> property to USB3 node
>
> On Thursday 23 July 2015 15:42:58, Nikhil Badola wrote:
> > Add "snps,configure-gfladj" boolean property to USB3 node. This
> > property
> ^^^^^^
> This does not match...
>
> > is used to determine if frame length adjustment is required
> >
> > Signed-off-by: Nikhil Badola <[email protected]>
> > ---
> > arch/arm/boot/dts/ls1021a.dtsi | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/arch/arm/boot/dts/ls1021a.dtsi
> > b/arch/arm/boot/dts/ls1021a.dtsi index c70bb27..f03f842 100644
> > --- a/arch/arm/boot/dts/ls1021a.dtsi
> > +++ b/arch/arm/boot/dts/ls1021a.dtsi
> > @@ -404,6 +404,7 @@
> > reg = <0x0 0x3100000 0x0 0x10000>;
> > interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> > dr_mode = "host";
> > + snps,configure-fladj = <0x20>;
> ^^^^^
> ...that. The same is for the subject. I guess these "gfladj" are just leftovers as
> patch 1 & 2 talk about "fladj"
Fladj stands for Frame Length ADJustment whereas the register used for this is gfladj.
Yes we intend to override fladj, hence using fladj in patch 1 and 2. I will remove gladj from
subject and description.
Further, I will be changing the property to "snps,fladj-override" as suggested by Mark in patch 1
and send next patch version.
Please let me know if there are any other comments.
>
> Best regards,
> Alexander
> --
> Dipl.-Inf. Alexander Stein
> SYS TEC electronic GmbH
> [email protected]
>
> Legal and Commercial Address:
> Am Windrad 2
> 08468 Heinsdorfergrund
> Germany
>
> Office: +49 (0) 3765 38600-0
> Fax: +49 (0) 3765 38600-4100
>
> Managing Directors:
> Director Technology/CEO: Dipl.-Phys. Siegmar Schmidt;
> Director Commercial Affairs/COO: Dipl. Ing. (FH) Armin von Collrepp
> Commercial Registry:
> Amtsgericht Chemnitz, HRB 28082; USt.-Id Nr. DE150534010