Fix data read/write error in HS200 mode due to chip DLL lock phase shift
Signed-off-by:Shirley Her <[email protected]>
---
change in V3:
1. add more explanation in dll_recovery and execute_tuning function
2. move dll_adjust_count to O2_host struct
3. fix some coding style error
4. renaming O2_PLL_WDT_CONTROL1 to O2_PLL_DLL_WDT_CONTROL1
change in V2:
1. use usleep_range instead of udelay
2. move dll_adjust_count to sdhci-pci-o2micro.com
change in V1:
1. add error recovery function to relock DLL with correct phase
2. retunign HS200 after DLL locked
---
drivers/mmc/host/sdhci-pci-o2micro.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index 9dc4548..186a33d 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -51,7 +51,7 @@
#define O2_SD_VENDOR_SETTING2 0x1C8
#define O2_SD_HW_TUNING_DISABLE BIT(4)
-#define O2_PLL_WDT_CONTROL1 0x1CC
+#define O2_PLL_DLL_WDT_CONTROL1 0x1CC
#define O2_PLL_FORCE_ACTIVE BIT(18)
#define O2_PLL_LOCK_STATUS BIT(14)
#define O2_PLL_SOFT_RESET BIT(12)
--
2.7.4