This patch serie allows to connect non-parallel camera sensor to
DCMI thanks to a bridge connected in between such as STMIPID02 [1].
Media controller support is introduced first, then support of
several sub-devices within pipeline with dynamic linking
between them.
In order to keep backward compatibility with applications
relying on V4L2 interface only, format set on video node
is propagated to all sub-devices connected to camera interface.
[1] https://www.spinics.net/lists/devicetree/msg278002.html
===========
= history =
===========
version 4:
- Also drop subdev nodes registry as suggested by Hans:
https://www.spinics.net/lists/arm-kernel/msg743375.html
version 3:
- Drop media device registry to not expose media controller
interface to userspace as per Laurent' suggestion:
https://www.spinics.net/lists/linux-media/msg153417.html
- Prefer "source" instead of "sensor" and keep it in
dcmi_graph_entity struct, move asd as first member
of struct as per Sakari' suggestion:
https://www.spinics.net/lists/linux-media/msg153119.html
- Drop dcmi_graph_deinit() as per Sakari' suggestion:
https://www.spinics.net/lists/linux-media/msg153417.html
version 2:
- Fix bus_info not consistent between media and V4L:
https://www.spinics.net/lists/arm-kernel/msg717676.html
- Propagation of format set on video node to the sub-devices
chain connected on camera interface
version 1:
- Initial submission
Hugues Fruchet (3):
media: stm32-dcmi: improve sensor subdev naming
media: stm32-dcmi: add media controller support
media: stm32-dcmi: add support of several sub-devices
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/stm32/stm32-dcmi.c | 283 +++++++++++++++++++++++++-----
2 files changed, 236 insertions(+), 49 deletions(-)
--
2.7.4
Rename "subdev" entity struct field to "source"
to prepare for several subdev support.
Move asd field on top of entity struct.
Signed-off-by: Hugues Fruchet <[email protected]>
Change-Id: I1545a1a29a8061ee67cc6e4b799e9a69071911e7
---
drivers/media/platform/stm32/stm32-dcmi.c | 46 +++++++++++++++----------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index b9dad0a..b462f71 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -100,10 +100,10 @@ enum state {
#define OVERRUN_ERROR_THRESHOLD 3
struct dcmi_graph_entity {
- struct device_node *node;
-
struct v4l2_async_subdev asd;
- struct v4l2_subdev *subdev;
+
+ struct device_node *remote_node;
+ struct v4l2_subdev *source;
};
struct dcmi_format {
@@ -595,7 +595,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
}
/* Enable stream on the sub device */
- ret = v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 1);
+ ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 1);
if (ret && ret != -ENOIOCTLCMD) {
dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error",
__func__);
@@ -685,7 +685,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
return 0;
err_subdev_streamoff:
- v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 0);
+ v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
err_pm_put:
pm_runtime_put(dcmi->dev);
@@ -713,7 +713,7 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
int ret;
/* Disable stream on the sub device */
- ret = v4l2_subdev_call(dcmi->entity.subdev, video, s_stream, 0);
+ ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
if (ret && ret != -ENOIOCTLCMD)
dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n",
__func__, ret);
@@ -857,7 +857,7 @@ static int dcmi_try_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f,
}
v4l2_fill_mbus_format(&format.format, pix, sd_fmt->mbus_code);
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad, set_fmt,
+ ret = v4l2_subdev_call(dcmi->entity.source, pad, set_fmt,
&pad_cfg, &format);
if (ret < 0)
return ret;
@@ -934,7 +934,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
mf->width = sd_framesize.width;
mf->height = sd_framesize.height;
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
+ ret = v4l2_subdev_call(dcmi->entity.source, pad,
set_fmt, NULL, &format);
if (ret < 0)
return ret;
@@ -991,7 +991,7 @@ static int dcmi_get_sensor_format(struct stm32_dcmi *dcmi,
};
int ret;
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad, get_fmt, NULL, &fmt);
+ ret = v4l2_subdev_call(dcmi->entity.source, pad, get_fmt, NULL, &fmt);
if (ret)
return ret;
@@ -1020,7 +1020,7 @@ static int dcmi_set_sensor_format(struct stm32_dcmi *dcmi,
}
v4l2_fill_mbus_format(&format.format, pix, sd_fmt->mbus_code);
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad, set_fmt,
+ ret = v4l2_subdev_call(dcmi->entity.source, pad, set_fmt,
&pad_cfg, &format);
if (ret < 0)
return ret;
@@ -1043,7 +1043,7 @@ static int dcmi_get_sensor_bounds(struct stm32_dcmi *dcmi,
/*
* Get sensor bounds first
*/
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad, get_selection,
+ ret = v4l2_subdev_call(dcmi->entity.source, pad, get_selection,
NULL, &bounds);
if (!ret)
*r = bounds.r;
@@ -1224,7 +1224,7 @@ static int dcmi_enum_framesizes(struct file *file, void *fh,
fse.code = sd_fmt->mbus_code;
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad, enum_frame_size,
+ ret = v4l2_subdev_call(dcmi->entity.source, pad, enum_frame_size,
NULL, &fse);
if (ret)
return ret;
@@ -1241,7 +1241,7 @@ static int dcmi_g_parm(struct file *file, void *priv,
{
struct stm32_dcmi *dcmi = video_drvdata(file);
- return v4l2_g_parm_cap(video_devdata(file), dcmi->entity.subdev, p);
+ return v4l2_g_parm_cap(video_devdata(file), dcmi->entity.source, p);
}
static int dcmi_s_parm(struct file *file, void *priv,
@@ -1249,7 +1249,7 @@ static int dcmi_s_parm(struct file *file, void *priv,
{
struct stm32_dcmi *dcmi = video_drvdata(file);
- return v4l2_s_parm_cap(video_devdata(file), dcmi->entity.subdev, p);
+ return v4l2_s_parm_cap(video_devdata(file), dcmi->entity.source, p);
}
static int dcmi_enum_frameintervals(struct file *file, void *fh,
@@ -1271,7 +1271,7 @@ static int dcmi_enum_frameintervals(struct file *file, void *fh,
fie.code = sd_fmt->mbus_code;
- ret = v4l2_subdev_call(dcmi->entity.subdev, pad,
+ ret = v4l2_subdev_call(dcmi->entity.source, pad,
enum_frame_interval, NULL, &fie);
if (ret)
return ret;
@@ -1291,7 +1291,7 @@ MODULE_DEVICE_TABLE(of, stm32_dcmi_of_match);
static int dcmi_open(struct file *file)
{
struct stm32_dcmi *dcmi = video_drvdata(file);
- struct v4l2_subdev *sd = dcmi->entity.subdev;
+ struct v4l2_subdev *sd = dcmi->entity.source;
int ret;
if (mutex_lock_interruptible(&dcmi->lock))
@@ -1322,7 +1322,7 @@ static int dcmi_open(struct file *file)
static int dcmi_release(struct file *file)
{
struct stm32_dcmi *dcmi = video_drvdata(file);
- struct v4l2_subdev *sd = dcmi->entity.subdev;
+ struct v4l2_subdev *sd = dcmi->entity.source;
bool fh_singular;
int ret;
@@ -1433,7 +1433,7 @@ static int dcmi_formats_init(struct stm32_dcmi *dcmi)
{
const struct dcmi_format *sd_fmts[ARRAY_SIZE(dcmi_formats)];
unsigned int num_fmts = 0, i, j;
- struct v4l2_subdev *subdev = dcmi->entity.subdev;
+ struct v4l2_subdev *subdev = dcmi->entity.source;
struct v4l2_subdev_mbus_code_enum mbus_code = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
};
@@ -1479,7 +1479,7 @@ static int dcmi_formats_init(struct stm32_dcmi *dcmi)
static int dcmi_framesizes_init(struct stm32_dcmi *dcmi)
{
unsigned int num_fsize = 0;
- struct v4l2_subdev *subdev = dcmi->entity.subdev;
+ struct v4l2_subdev *subdev = dcmi->entity.source;
struct v4l2_subdev_frame_size_enum fse = {
.which = V4L2_SUBDEV_FORMAT_ACTIVE,
.code = dcmi->sd_format->mbus_code,
@@ -1526,7 +1526,7 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
int ret;
- dcmi->vdev->ctrl_handler = dcmi->entity.subdev->ctrl_handler;
+ dcmi->vdev->ctrl_handler = dcmi->entity.source->ctrl_handler;
ret = dcmi_formats_init(dcmi);
if (ret) {
dev_err(dcmi->dev, "No supported mediabus format found\n");
@@ -1582,7 +1582,7 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name);
- dcmi->entity.subdev = subdev;
+ dcmi->entity.source = subdev;
return 0;
}
@@ -1608,7 +1608,7 @@ static int dcmi_graph_parse(struct stm32_dcmi *dcmi, struct device_node *node)
return -EINVAL;
/* Remote node to connect */
- dcmi->entity.node = remote;
+ dcmi->entity.remote_node = remote;
dcmi->entity.asd.match_type = V4L2_ASYNC_MATCH_FWNODE;
dcmi->entity.asd.match.fwnode = of_fwnode_handle(remote);
return 0;
@@ -1631,7 +1631,7 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi)
&dcmi->entity.asd);
if (ret) {
dev_err(dcmi->dev, "Failed to add subdev notifier\n");
- of_node_put(dcmi->entity.node);
+ of_node_put(dcmi->entity.remote_node);
return ret;
}
--
2.7.4
Add media controller support to dcmi in order
to walk within remote subdevices pipeline.
Signed-off-by: Hugues Fruchet <[email protected]>
Change-Id: Id6280c58ea3c6f3d03da2027ac45df9f0e7a1da9
---
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/stm32/stm32-dcmi.c | 52 ++++++++++++++++++++++++-------
2 files changed, 41 insertions(+), 13 deletions(-)
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 8a19654..de7e21f 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -121,7 +121,7 @@ config VIDEO_S3C_CAMIF
config VIDEO_STM32_DCMI
tristate "STM32 Digital Camera Memory Interface (DCMI) support"
- depends on VIDEO_V4L2 && OF
+ depends on VIDEO_V4L2 && OF && MEDIA_CONTROLLER
depends on ARCH_STM32 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index b462f71..6f37617 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -169,6 +169,9 @@ struct stm32_dcmi {
/* Ensure DMA operations atomicity */
struct mutex dma_lock;
+
+ struct media_device mdev;
+ struct media_pad vid_cap_pad;
};
static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n)
@@ -1551,14 +1554,6 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
return ret;
}
- ret = video_register_device(dcmi->vdev, VFL_TYPE_GRABBER, -1);
- if (ret) {
- dev_err(dcmi->dev, "Failed to register video device\n");
- return ret;
- }
-
- dev_dbg(dcmi->dev, "Device registered as %s\n",
- video_device_node_name(dcmi->vdev));
return 0;
}
@@ -1751,10 +1746,19 @@ static int dcmi_probe(struct platform_device *pdev)
q = &dcmi->queue;
+ dcmi->v4l2_dev.mdev = &dcmi->mdev;
+
+ /* Initialize media device */
+ strscpy(dcmi->mdev.model, DRV_NAME, sizeof(dcmi->mdev.model));
+ snprintf(dcmi->mdev.bus_info, sizeof(dcmi->mdev.bus_info),
+ "platform:%s", DRV_NAME);
+ dcmi->mdev.dev = &pdev->dev;
+ media_device_init(&dcmi->mdev);
+
/* Initialize the top-level structure */
ret = v4l2_device_register(&pdev->dev, &dcmi->v4l2_dev);
if (ret)
- goto err_dma_release;
+ goto err_media_device_cleanup;
dcmi->vdev = video_device_alloc();
if (!dcmi->vdev) {
@@ -1774,6 +1778,25 @@ static int dcmi_probe(struct platform_device *pdev)
V4L2_CAP_READWRITE;
video_set_drvdata(dcmi->vdev, dcmi);
+ /* Media entity pads */
+ dcmi->vid_cap_pad.flags = MEDIA_PAD_FL_SINK;
+ ret = media_entity_pads_init(&dcmi->vdev->entity,
+ 1, &dcmi->vid_cap_pad);
+ if (ret) {
+ dev_err(dcmi->dev, "Failed to init media entity pad\n");
+ goto err_device_release;
+ }
+ dcmi->vdev->entity.flags |= MEDIA_ENT_FL_DEFAULT;
+
+ ret = video_register_device(dcmi->vdev, VFL_TYPE_GRABBER, -1);
+ if (ret) {
+ dev_err(dcmi->dev, "Failed to register video device\n");
+ goto err_media_entity_cleanup;
+ }
+
+ dev_dbg(dcmi->dev, "Device registered as %s\n",
+ video_device_node_name(dcmi->vdev));
+
/* Buffer queue */
q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
q->io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF;
@@ -1789,12 +1812,12 @@ static int dcmi_probe(struct platform_device *pdev)
ret = vb2_queue_init(q);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to initialize vb2 queue\n");
- goto err_device_release;
+ goto err_media_entity_cleanup;
}
ret = dcmi_graph_init(dcmi);
if (ret < 0)
- goto err_device_release;
+ goto err_media_entity_cleanup;
/* Reset device */
ret = reset_control_assert(dcmi->rstc);
@@ -1821,11 +1844,14 @@ static int dcmi_probe(struct platform_device *pdev)
err_cleanup:
v4l2_async_notifier_cleanup(&dcmi->notifier);
+err_media_entity_cleanup:
+ media_entity_cleanup(&dcmi->vdev->entity);
err_device_release:
video_device_release(dcmi->vdev);
err_device_unregister:
v4l2_device_unregister(&dcmi->v4l2_dev);
-err_dma_release:
+err_media_device_cleanup:
+ media_device_cleanup(&dcmi->mdev);
dma_release_channel(dcmi->dma_chan);
return ret;
@@ -1839,7 +1865,9 @@ static int dcmi_remove(struct platform_device *pdev)
v4l2_async_notifier_unregister(&dcmi->notifier);
v4l2_async_notifier_cleanup(&dcmi->notifier);
+ media_entity_cleanup(&dcmi->vdev->entity);
v4l2_device_unregister(&dcmi->v4l2_dev);
+ media_device_cleanup(&dcmi->mdev);
dma_release_channel(dcmi->dma_chan);
--
2.7.4
Add support of several sub-devices within pipeline instead
of a single one.
This allows to support a CSI-2 camera sensor connected
through a CSI-2 to parallel bridge.
Signed-off-by: Hugues Fruchet <[email protected]>
---
drivers/media/platform/stm32/stm32-dcmi.c | 195 +++++++++++++++++++++++++++---
1 file changed, 177 insertions(+), 18 deletions(-)
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 6f37617..7c21805 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -172,6 +172,7 @@ struct stm32_dcmi {
struct media_device mdev;
struct media_pad vid_cap_pad;
+ struct media_pipeline pipeline;
};
static inline struct stm32_dcmi *notifier_to_dcmi(struct v4l2_async_notifier *n)
@@ -583,6 +584,131 @@ static void dcmi_buf_queue(struct vb2_buffer *vb)
spin_unlock_irq(&dcmi->irqlock);
}
+static struct media_entity *dcmi_find_source(struct stm32_dcmi *dcmi)
+{
+ struct media_entity *entity = &dcmi->vdev->entity;
+ struct media_pad *pad;
+
+ /* Walk searching for entity having no sink */
+ while (1) {
+ pad = &entity->pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ break;
+
+ pad = media_entity_remote_pad(pad);
+ if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
+ break;
+
+ entity = pad->entity;
+ }
+
+ return entity;
+}
+
+static int dcmi_pipeline_s_fmt(struct stm32_dcmi *dcmi,
+ struct v4l2_subdev_pad_config *pad_cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct media_entity *entity = &dcmi->entity.source->entity;
+ struct v4l2_subdev *subdev;
+ struct media_pad *sink_pad = NULL;
+ struct media_pad *src_pad = NULL;
+ struct media_pad *pad = NULL;
+ struct v4l2_subdev_format fmt = *format;
+ bool found = false;
+ int ret;
+
+ /*
+ * Starting from sensor subdevice, walk within
+ * pipeline and set format on each subdevice
+ */
+ while (1) {
+ unsigned int i;
+
+ /* Search if current entity has a source pad */
+ for (i = 0; i < entity->num_pads; i++) {
+ pad = &entity->pads[i];
+ if (pad->flags & MEDIA_PAD_FL_SOURCE) {
+ src_pad = pad;
+ found = true;
+ break;
+ }
+ }
+ if (!found)
+ break;
+
+ subdev = media_entity_to_v4l2_subdev(entity);
+
+ /* Propagate format on sink pad if any, otherwise source pad */
+ if (sink_pad)
+ pad = sink_pad;
+
+ dev_dbg(dcmi->dev, "%s[%d] pad format set to 0x%x %ux%u\n",
+ subdev->name, pad->index, format->format.code,
+ format->format.width, format->format.height);
+
+ fmt.pad = pad->index;
+ ret = v4l2_subdev_call(subdev, pad, set_fmt, pad_cfg, &fmt);
+ if (ret < 0)
+ return ret;
+
+ /* Walk to next entity */
+ sink_pad = media_entity_remote_pad(src_pad);
+ if (!sink_pad || !is_media_entity_v4l2_subdev(sink_pad->entity))
+ break;
+
+ entity = sink_pad->entity;
+ }
+ *format = fmt;
+
+ return 0;
+}
+
+static int dcmi_pipeline_s_stream(struct stm32_dcmi *dcmi, int state)
+{
+ struct media_entity *entity = &dcmi->vdev->entity;
+ struct v4l2_subdev *subdev;
+ struct media_pad *pad;
+ int ret;
+
+ /* Start/stop all entities within pipeline */
+ while (1) {
+ pad = &entity->pads[0];
+ if (!(pad->flags & MEDIA_PAD_FL_SINK))
+ break;
+
+ pad = media_entity_remote_pad(pad);
+ if (!pad || !is_media_entity_v4l2_subdev(pad->entity))
+ break;
+
+ entity = pad->entity;
+ subdev = media_entity_to_v4l2_subdev(entity);
+
+ ret = v4l2_subdev_call(subdev, video, s_stream, state);
+ if (ret < 0 && ret != -ENOIOCTLCMD) {
+ dev_err(dcmi->dev, "%s: %s failed to %s streaming (%d)\n",
+ __func__, subdev->name,
+ state ? "start" : "stop", ret);
+ return ret;
+ }
+
+ dev_dbg(dcmi->dev, "%s is %s\n",
+ subdev->name, state ? "started" : "stopped");
+ }
+
+ return 0;
+}
+
+static int dcmi_pipeline_start(struct stm32_dcmi *dcmi)
+{
+ return dcmi_pipeline_s_stream(dcmi, 1);
+}
+
+static void dcmi_pipeline_stop(struct stm32_dcmi *dcmi)
+{
+ dcmi_pipeline_s_stream(dcmi, 0);
+}
+
static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
{
struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
@@ -597,14 +723,17 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
goto err_release_buffers;
}
- /* Enable stream on the sub device */
- ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 1);
- if (ret && ret != -ENOIOCTLCMD) {
- dev_err(dcmi->dev, "%s: Failed to start streaming, subdev streamon error",
- __func__);
+ ret = media_pipeline_start(&dcmi->vdev->entity, &dcmi->pipeline);
+ if (ret < 0) {
+ dev_err(dcmi->dev, "%s: Failed to start streaming, media pipeline start error (%d)\n",
+ __func__, ret);
goto err_pm_put;
}
+ ret = dcmi_pipeline_start(dcmi);
+ if (ret)
+ goto err_media_pipeline_stop;
+
spin_lock_irq(&dcmi->irqlock);
/* Set bus width */
@@ -676,7 +805,7 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
if (ret) {
dev_err(dcmi->dev, "%s: Start streaming failed, cannot start capture\n",
__func__);
- goto err_subdev_streamoff;
+ goto err_pipeline_stop;
}
/* Enable interruptions */
@@ -687,8 +816,11 @@ static int dcmi_start_streaming(struct vb2_queue *vq, unsigned int count)
return 0;
-err_subdev_streamoff:
- v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
+err_pipeline_stop:
+ dcmi_pipeline_stop(dcmi);
+
+err_media_pipeline_stop:
+ media_pipeline_stop(&dcmi->vdev->entity);
err_pm_put:
pm_runtime_put(dcmi->dev);
@@ -713,13 +845,10 @@ static void dcmi_stop_streaming(struct vb2_queue *vq)
{
struct stm32_dcmi *dcmi = vb2_get_drv_priv(vq);
struct dcmi_buf *buf, *node;
- int ret;
- /* Disable stream on the sub device */
- ret = v4l2_subdev_call(dcmi->entity.source, video, s_stream, 0);
- if (ret && ret != -ENOIOCTLCMD)
- dev_err(dcmi->dev, "%s: Failed to stop streaming, subdev streamoff error (%d)\n",
- __func__, ret);
+ dcmi_pipeline_stop(dcmi);
+
+ media_pipeline_stop(&dcmi->vdev->entity);
spin_lock_irq(&dcmi->irqlock);
@@ -937,8 +1066,7 @@ static int dcmi_set_fmt(struct stm32_dcmi *dcmi, struct v4l2_format *f)
mf->width = sd_framesize.width;
mf->height = sd_framesize.height;
- ret = v4l2_subdev_call(dcmi->entity.source, pad,
- set_fmt, NULL, &format);
+ ret = dcmi_pipeline_s_fmt(dcmi, NULL, &format);
if (ret < 0)
return ret;
@@ -1529,7 +1657,20 @@ static int dcmi_graph_notify_complete(struct v4l2_async_notifier *notifier)
struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
int ret;
+ /*
+ * Now that the graph is complete,
+ * we search for the source subdevice
+ * in order to expose it through V4L2 interface
+ */
+ dcmi->entity.source =
+ media_entity_to_v4l2_subdev(dcmi_find_source(dcmi));
+ if (!dcmi->entity.source) {
+ dev_err(dcmi->dev, "Source subdevice not found\n");
+ return -ENODEV;
+ }
+
dcmi->vdev->ctrl_handler = dcmi->entity.source->ctrl_handler;
+
ret = dcmi_formats_init(dcmi);
if (ret) {
dev_err(dcmi->dev, "No supported mediabus format found\n");
@@ -1574,12 +1715,30 @@ static int dcmi_graph_notify_bound(struct v4l2_async_notifier *notifier,
struct v4l2_async_subdev *asd)
{
struct stm32_dcmi *dcmi = notifier_to_dcmi(notifier);
+ unsigned int ret;
+ int src_pad;
dev_dbg(dcmi->dev, "Subdev %s bound\n", subdev->name);
- dcmi->entity.source = subdev;
+ /*
+ * Link this sub-device to DCMI, it could be
+ * a parallel camera sensor or a bridge
+ */
+ src_pad = media_entity_get_fwnode_pad(&subdev->entity,
+ subdev->fwnode,
+ MEDIA_PAD_FL_SOURCE);
+
+ ret = media_create_pad_link(&subdev->entity, src_pad,
+ &dcmi->vdev->entity, 0,
+ MEDIA_LNK_FL_IMMUTABLE |
+ MEDIA_LNK_FL_ENABLED);
+ if (ret)
+ dev_err(dcmi->dev, "Failed to create media pad link with subdev %s\n",
+ subdev->name);
+ else
+ dev_dbg(dcmi->dev, "DCMI is now linked to %s\n", subdev->name);
- return 0;
+ return ret;
}
static const struct v4l2_async_notifier_operations dcmi_graph_notify_ops = {
--
2.7.4
Hi Hugues,
Can you provide the output of the most recent v4l2-compliance?
Use 'v4l2-compliance -s'.
Also, just to confirm, with this v4 there are no /dev/mediaX or
/dev/v4l-subdevX devices created anymore, right?
This v4 looks good to me, I just want to have these final checks
done.
Regards,
Hans
On 7/31/19 2:56 PM, Hugues Fruchet wrote:
> This patch serie allows to connect non-parallel camera sensor to
> DCMI thanks to a bridge connected in between such as STMIPID02 [1].
>
> Media controller support is introduced first, then support of
> several sub-devices within pipeline with dynamic linking
> between them.
> In order to keep backward compatibility with applications
> relying on V4L2 interface only, format set on video node
> is propagated to all sub-devices connected to camera interface.
>
> [1] https://www.spinics.net/lists/devicetree/msg278002.html
>
> ===========
> = history =
> ===========
> version 4:
> - Also drop subdev nodes registry as suggested by Hans:
> https://www.spinics.net/lists/arm-kernel/msg743375.html
>
> version 3:
> - Drop media device registry to not expose media controller
> interface to userspace as per Laurent' suggestion:
> https://www.spinics.net/lists/linux-media/msg153417.html
> - Prefer "source" instead of "sensor" and keep it in
> dcmi_graph_entity struct, move asd as first member
> of struct as per Sakari' suggestion:
> https://www.spinics.net/lists/linux-media/msg153119.html
> - Drop dcmi_graph_deinit() as per Sakari' suggestion:
> https://www.spinics.net/lists/linux-media/msg153417.html
>
> version 2:
> - Fix bus_info not consistent between media and V4L:
> https://www.spinics.net/lists/arm-kernel/msg717676.html
> - Propagation of format set on video node to the sub-devices
> chain connected on camera interface
>
> version 1:
> - Initial submission
>
> Hugues Fruchet (3):
> media: stm32-dcmi: improve sensor subdev naming
> media: stm32-dcmi: add media controller support
> media: stm32-dcmi: add support of several sub-devices
>
> drivers/media/platform/Kconfig | 2 +-
> drivers/media/platform/stm32/stm32-dcmi.c | 283 +++++++++++++++++++++++++-----
> 2 files changed, 236 insertions(+), 49 deletions(-)
>
Hi Hugues,
On 8/8/19 11:38 AM, Hugues FRUCHET wrote:
> Hi Hans,
>
> You're welcome, here it is:
>
> 1) v4l-utils master branch, commit
> 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece "v4l2-ctl: fix double
> decrementing of stream_count"
>
> 2) Cropping test is failed as usual because of OV5640 discrete framesizes
>
> 3) No more /dev/media* and /dev/v4l-*:
> root@stm32mp1-av96:~# ls -al /dev/video0
> crw-rw---- 1 root video 81, 0 Mar 19 17:42 /dev/video0
> root@stm32mp1-av96:~# ls -al /dev/media*
> ls: cannot access '/dev/media*': No such file or directory
> root@stm32mp1-av96:~# ls -al /dev/v4l-*
> ls: cannot access '/dev/v4l-*': No such file or directory
Good. One more question: is this tested with two subdevs? So a bridge+sensor?
Regards,
Hans
>
>
> root@stm32mp1-av96:~# v4l2-compliance -s
> v4l2-compliance SHA: 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece, 32 bits
>
> Compliance test for stm32-dcmi device /dev/video0:
>
> Driver Info:
> Driver name : stm32-dcmi
> Card type : STM32 Camera Memory Interface
> Bus info : platform:dcmi
> Driver version : 4.19.49
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second /dev/video0 open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Control ioctls (Input 0):
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 18 Private Controls: 0
>
> Format ioctls (Input 0):
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> fail:
> ../../../../../../../../../sources/v4l-utils/utils/v4l2-compliance/v4l2-test-formats.cpp(1414):
> node->frmsizes_count[pixfm
> t] > 1
> test Cropping: FAIL
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls (Input 0):
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls (Input 0):
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
> test Requests: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
> test blocking wait: OK
> test MMAP (no poll): OK
> test MMAP (select): OK
> test MMAP (epoll): OK
> test USERPTR (no poll): OK (Not Supported)
> test USERPTR (select): OK (Not Supported)
> test DMABUF: Cannot test, specify --expbuf-device
>
> Total for stm32-dcmi device /dev/video0: 51, Succeeded: 50, Failed: 1,
> Warnings: 0
>
>
> On 8/7/19 12:15 PM, Hans Verkuil wrote:
>> Hi Hugues,
>>
>> Can you provide the output of the most recent v4l2-compliance?
>>
>> Use 'v4l2-compliance -s'.
>>
>> Also, just to confirm, with this v4 there are no /dev/mediaX or
>> /dev/v4l-subdevX devices created anymore, right?
>>
>> This v4 looks good to me, I just want to have these final checks
>> done.
>>
>> Regards,
>>
>> Hans
>>
>
> Best regards,
> Hugues.
>
Hi Hans,
You're welcome, here it is:
1) v4l-utils master branch, commit
6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece "v4l2-ctl: fix double
decrementing of stream_count"
2) Cropping test is failed as usual because of OV5640 discrete framesizes
3) No more /dev/media* and /dev/v4l-*:
root@stm32mp1-av96:~# ls -al /dev/video0
crw-rw---- 1 root video 81, 0 Mar 19 17:42 /dev/video0
root@stm32mp1-av96:~# ls -al /dev/media*
ls: cannot access '/dev/media*': No such file or directory
root@stm32mp1-av96:~# ls -al /dev/v4l-*
ls: cannot access '/dev/v4l-*': No such file or directory
root@stm32mp1-av96:~# v4l2-compliance -s
v4l2-compliance SHA: 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece, 32 bits
Compliance test for stm32-dcmi device /dev/video0:
Driver Info:
Driver name : stm32-dcmi
Card type : STM32 Camera Memory Interface
Bus info : platform:dcmi
Driver version : 4.19.49
Capabilities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 18 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
fail:
../../../../../../../../../sources/v4l-utils/utils/v4l2-compliance/v4l2-test-formats.cpp(1414):
node->frmsizes_count[pixfm
t] > 1
test Cropping: FAIL
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK
test blocking wait: OK
test MMAP (no poll): OK
test MMAP (select): OK
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported)
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for stm32-dcmi device /dev/video0: 51, Succeeded: 50, Failed: 1,
Warnings: 0
On 8/7/19 12:15 PM, Hans Verkuil wrote:
> Hi Hugues,
>
> Can you provide the output of the most recent v4l2-compliance?
>
> Use 'v4l2-compliance -s'.
>
> Also, just to confirm, with this v4 there are no /dev/mediaX or
> /dev/v4l-subdevX devices created anymore, right?
>
> This v4 looks good to me, I just want to have these final checks
> done.
>
> Regards,
>
> Hans
>
Best regards,
Hugues.
Hi Hans,
On 8/8/19 11:41 AM, Hans Verkuil wrote:
> Hi Hugues,
>
> On 8/8/19 11:38 AM, Hugues FRUCHET wrote:
>> Hi Hans,
>>
>> You're welcome, here it is:
>>
>> 1) v4l-utils master branch, commit
>> 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece "v4l2-ctl: fix double
>> decrementing of stream_count"
>>
>> 2) Cropping test is failed as usual because of OV5640 discrete framesizes
>>
>> 3) No more /dev/media* and /dev/v4l-*:
>> root@stm32mp1-av96:~# ls -al /dev/video0
>> crw-rw---- 1 root video 81, 0 Mar 19 17:42 /dev/video0
>> root@stm32mp1-av96:~# ls -al /dev/media*
>> ls: cannot access '/dev/media*': No such file or directory
>> root@stm32mp1-av96:~# ls -al /dev/v4l-*
>> ls: cannot access '/dev/v4l-*': No such file or directory
>
> Good. One more question: is this tested with two subdevs? So a bridge+sensor?
Yes, tested with ov5640 (CSI) => st-mipid02 => stm32-dcmi.
In term of hardware setup, it's an Avenger96 96 board [1] embedding an
STM32MP157 (DCMI //) and an ST MIPID02 bridge (CSI to //) in order to
enable CSI video input on high speed expansion connector + a D3
engineering mezzanine board [2] embedding an OV5640 CSI camera.
&dcmi {
...
port {
dcmi_0: endpoint {
remote-endpoint = <&mipid02_2>;
mipid02: mipid02@14 {
...
port@0 {
reg = <0>;
mipid02_0: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&ov5640_0>;
};
};
port@2 {
reg = <2>;
mipid02_2: endpoint {
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
pclk-sample = <0>;
remote-endpoint = <&dcmi_0>;
};
ov5640: camera@3c {
...
ov5640_0: endpoint {
remote-endpoint = <&mipid02_0>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
[1]
https://www.96boards.org/product/avenger96/
https://wiki.dh-electronics.com/index.php/Avenger96
[2] https://www.96boards.org/product/d3camera/
>
> Regards,
>
> Hans
>
>>
>>
>> root@stm32mp1-av96:~# v4l2-compliance -s
>> v4l2-compliance SHA: 6aa15f7447d4aeca6af1ed7ee9644a0c7e891ece, 32 bits
>>
>> Compliance test for stm32-dcmi device /dev/video0:
>>
>> Driver Info:
>> Driver name : stm32-dcmi
>> Card type : STM32 Camera Memory Interface
>> Bus info : platform:dcmi
>> Driver version : 4.19.49
>> Capabilities : 0x85200001
>> Video Capture
>> Read/Write
>> Streaming
>> Extended Pix Format
>> Device Capabilities
>> Device Caps : 0x05200001
>> Video Capture
>> Read/Write
>> Streaming
>> Extended Pix Format
>>
>> Required ioctls:
>> test VIDIOC_QUERYCAP: OK
>>
>> Allow for multiple opens:
>> test second /dev/video0 open: OK
>> test VIDIOC_QUERYCAP: OK
>> test VIDIOC_G/S_PRIORITY: OK
>> test for unlimited opens: OK
>>
>> Debug ioctls:
>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>> test VIDIOC_LOG_STATUS: OK
>>
>> Input ioctls:
>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>> test VIDIOC_G/S/ENUMINPUT: OK
>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>> Inputs: 1 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls (Input 0):
>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>> test VIDIOC_QUERYCTRL: OK
>> test VIDIOC_G/S_CTRL: OK
>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>> Standard Controls: 18 Private Controls: 0
>>
>> Format ioctls (Input 0):
>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>> test VIDIOC_G/S_PARM: OK
>> test VIDIOC_G_FBUF: OK (Not Supported)
>> test VIDIOC_G_FMT: OK
>> test VIDIOC_TRY_FMT: OK
>> test VIDIOC_S_FMT: OK
>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>> fail:
>> ../../../../../../../../../sources/v4l-utils/utils/v4l2-compliance/v4l2-test-formats.cpp(1414):
>> node->frmsizes_count[pixfm
>> t] > 1
>> test Cropping: FAIL
>> test Composing: OK (Not Supported)
>> test Scaling: OK (Not Supported)
>>
>> Codec ioctls (Input 0):
>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>
>> Buffer ioctls (Input 0):
>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>> test VIDIOC_EXPBUF: OK
>> test Requests: OK (Not Supported)
>>
>> Test input 0:
>>
>> Streaming ioctls:
>> test read/write: OK
>> test blocking wait: OK
>> test MMAP (no poll): OK
>> test MMAP (select): OK
>> test MMAP (epoll): OK
>> test USERPTR (no poll): OK (Not Supported)
>> test USERPTR (select): OK (Not Supported)
>> test DMABUF: Cannot test, specify --expbuf-device
>>
>> Total for stm32-dcmi device /dev/video0: 51, Succeeded: 50, Failed: 1,
>> Warnings: 0
>>
>>
>> On 8/7/19 12:15 PM, Hans Verkuil wrote:
>>> Hi Hugues,
>>>
>>> Can you provide the output of the most recent v4l2-compliance?
>>>
>>> Use 'v4l2-compliance -s'.
>>>
>>> Also, just to confirm, with this v4 there are no /dev/mediaX or
>>> /dev/v4l-subdevX devices created anymore, right?
>>>
>>> This v4 looks good to me, I just want to have these final checks
>>> done.
>>>
>>> Regards,
>>>
>>> Hans
>>>
>>
>> Best regards,
>> Hugues.
>>
>
Best regards,
Hugues.
Hi Hugues,
Thanks for teh update.
On Wed, Jul 31, 2019 at 02:56:21PM +0200, Hugues Fruchet wrote:
> Rename "subdev" entity struct field to "source"
> to prepare for several subdev support.
> Move asd field on top of entity struct.
>
> Signed-off-by: Hugues Fruchet <[email protected]>
> Change-Id: I1545a1a29a8061ee67cc6e4b799e9a69071911e7
No Change-Id tags in the kernel, please. Check the other two as well.
With that fixed,
Acked-by: Sakari Ailus <[email protected]>
--
Sakari Ailus
[email protected]
Hi Sakari,
Sorry for inconvenience, I will push a V5 with that fixed.
May I put your "Acked-by" also on the 2 other commits ? Or just this one ?
On 8/9/19 6:01 PM, Sakari Ailus wrote:
> Hi Hugues,
>
> Thanks for teh update.
>
> On Wed, Jul 31, 2019 at 02:56:21PM +0200, Hugues Fruchet wrote:
>> Rename "subdev" entity struct field to "source"
>> to prepare for several subdev support.
>> Move asd field on top of entity struct.
>>
>> Signed-off-by: Hugues Fruchet <[email protected]>
>> Change-Id: I1545a1a29a8061ee67cc6e4b799e9a69071911e7
>
> No Change-Id tags in the kernel, please. Check the other two as well.
>
> With that fixed,
>
> Acked-by: Sakari Ailus <[email protected]>
>
Best regards,
Hugues.
Hi Sakari, Hans,
I've just pushed a v6 with the FIXME we discussed on IRC about
"parallel" mbus code versus "serial" mbus code. I have also added
some traces to help in debugging if such case occurs.
version 6:
- As per Sakari remark: add a FIXME explaining that this
version only supports subdevices which expose RGB & YUV
"parallel form" mbus code (_2X8)
- Add some trace around subdev_call(s_fmt) error & format
changes to debug subdev which only expose serial mbus code
- Conform to "<name>":<pad index> when tracing subdev infos
Best regards,
Hugues.
On 8/9/19 6:01 PM, Sakari Ailus wrote:
> Hi Hugues,
>
> Thanks for teh update.
>
> On Wed, Jul 31, 2019 at 02:56:21PM +0200, Hugues Fruchet wrote:
>> Rename "subdev" entity struct field to "source"
>> to prepare for several subdev support.
>> Move asd field on top of entity struct.
>>
>> Signed-off-by: Hugues Fruchet <[email protected]>
>> Change-Id: I1545a1a29a8061ee67cc6e4b799e9a69071911e7
>
> No Change-Id tags in the kernel, please. Check the other two as well.
>
> With that fixed,
>
> Acked-by: Sakari Ailus <[email protected]>
>