2021-01-06 10:56:02

by Shradha Todi

Subject: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU

The size parameter is unsigned long type which can accept size > 4GB. In
that case, the upper limit address must be programmed. Add support to
program the upper limit address and set INCREASE_REGION_SIZE in case size >
4GB.

Signed-off-by: Shradha Todi <[email protected]>
---
v1: https://lkml.org/lkml/2020/12/20/187
v2:
Addressed Rob's review comment and added PCI version check condition to
avoid writing to reserved registers.

drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
drivers/pci/controller/dwc/pcie-designware.h | 1 +
2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 74590c7..1d62ca9 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -290,12 +290,17 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
upper_32_bits(cpu_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
lower_32_bits(cpu_addr + size - 1));
+ if (pci->version >= 0x460A)
+ dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
+ upper_32_bits(cpu_addr + size - 1));
dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
lower_32_bits(pci_addr));
dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
upper_32_bits(pci_addr));
- dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
- PCIE_ATU_FUNC_NUM(func_no));
+ val = type | PCIE_ATU_FUNC_NUM(func_no);
+ val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
+ val | PCIE_ATU_INCREASE_REGION_SIZE : val;
+ dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);

/*
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 8b905a2..7da79eb 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -102,6 +102,7 @@
#define PCIE_ATU_DEV(x) FIELD_PREP(GENMASK(23, 19), x)
#define PCIE_ATU_FUNC(x) FIELD_PREP(GENMASK(18, 16), x)
#define PCIE_ATU_UPPER_TARGET 0x91C
+#define PCIE_ATU_UPPER_LIMIT 0x924

#define PCIE_MISC_CONTROL_1_OFF 0x8BC
#define PCIE_DBI_RO_WR_EN BIT(0)
--
2.7.4

2021-01-06 11:34:06

by Pankaj Dubey

Subject: RE: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU

> -----Original Message-----
> From: Shradha Todi <[email protected]>
> Sent: Wednesday, January 6, 2021 4:20 PM
> To: [email protected]; [email protected]
> Cc: [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected]; Shradha Todi
> <[email protected]>
> Subject: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU
>
> The size parameter is unsigned long type which can accept size > 4GB. In that
> case, the upper limit address must be programmed. Add support to program
> the upper limit address and set INCREASE_REGION_SIZE in case size > 4GB.
>
> Signed-off-by: Shradha Todi <[email protected]>
> ---
> v1: https://lkml.org/lkml/2020/12/20/187
> v2:
> Addressed Rob's review comment and added PCI version check condition
> to
> avoid writing to reserved registers.
>

Reviewed-by: Pankaj Dubey <[email protected]>

> drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> b/drivers/pci/controller/dwc/pcie-designware.c
> index 74590c7..1d62ca9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -290,12 +290,17 @@ static void __dw_pcie_prog_outbound_atu(struct
> dw_pcie *pci, u8 func_no,
> upper_32_bits(cpu_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> lower_32_bits(cpu_addr + size - 1));
> + if (pci->version >= 0x460A)
> + dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
> + upper_32_bits(cpu_addr + size - 1));
> dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> lower_32_bits(pci_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> upper_32_bits(pci_addr));
> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> - PCIE_ATU_FUNC_NUM(func_no));
> + val = type | PCIE_ATU_FUNC_NUM(func_no);
> + val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
> + val | PCIE_ATU_INCREASE_REGION_SIZE : val;
> + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
> dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
>
> /*
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> b/drivers/pci/controller/dwc/pcie-designware.h
> index 8b905a2..7da79eb 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -102,6 +102,7 @@
> #define PCIE_ATU_DEV(x) FIELD_PREP(GENMASK(23,
> 19), x)
> #define PCIE_ATU_FUNC(x) FIELD_PREP(GENMASK(18, 16), x)
> #define PCIE_ATU_UPPER_TARGET 0x91C
> +#define PCIE_ATU_UPPER_LIMIT 0x924
>
> #define PCIE_MISC_CONTROL_1_OFF 0x8BC
> #define PCIE_DBI_RO_WR_EN BIT(0)
> --
> 2.7.4

2021-01-27 22:19:15

by Shradha Todi

Subject: RE: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU

Hi,
Gentle Ping..

Thanks

> -----Original Message-----
> From: Shradha Todi <[email protected]>
> Sent: Wednesday, January 6, 2021 4:20 PM
> Subject: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU
>
> The size parameter is unsigned long type which can accept size > 4GB. In that
> case, the upper limit address must be programmed. Add support to program the
> upper limit address and set INCREASE_REGION_SIZE in case size > 4GB.
>
> Signed-off-by: Shradha Todi <[email protected]>
> ---
> v1: https://lkml.org/lkml/2020/12/20/187
> v2:
> Addressed Rob's review comment and added PCI version check condition to
> avoid writing to reserved registers.
>
> drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c
> b/drivers/pci/controller/dwc/pcie-designware.c
> index 74590c7..1d62ca9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -290,12 +290,17 @@ static void __dw_pcie_prog_outbound_atu(struct
> dw_pcie *pci, u8 func_no,
> upper_32_bits(cpu_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> lower_32_bits(cpu_addr + size - 1));
> + if (pci->version >= 0x460A)
> + dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
> + upper_32_bits(cpu_addr + size - 1));
> dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> lower_32_bits(pci_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> upper_32_bits(pci_addr));
> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> - PCIE_ATU_FUNC_NUM(func_no));
> + val = type | PCIE_ATU_FUNC_NUM(func_no);
> + val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
> + val | PCIE_ATU_INCREASE_REGION_SIZE : val;
> + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
> dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
>
> /*
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h
> b/drivers/pci/controller/dwc/pcie-designware.h
> index 8b905a2..7da79eb 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -102,6 +102,7 @@
> #define PCIE_ATU_DEV(x) FIELD_PREP(GENMASK(23, 19),
> x)
> #define PCIE_ATU_FUNC(x) FIELD_PREP(GENMASK(18, 16), x)
> #define PCIE_ATU_UPPER_TARGET 0x91C
> +#define PCIE_ATU_UPPER_LIMIT 0x924
>
> #define PCIE_MISC_CONTROL_1_OFF 0x8BC
> #define PCIE_DBI_RO_WR_EN BIT(0)
> --
> 2.7.4

2021-01-28 00:08:57

by Rob Herring (Arm)

Subject: Re: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU

On Wed, Jan 6, 2021 at 4:52 AM Shradha Todi <[email protected]> wrote:
>
> The size parameter is unsigned long type which can accept size > 4GB. In
> that case, the upper limit address must be programmed. Add support to
> program the upper limit address and set INCREASE_REGION_SIZE in case size >
> 4GB.
>
> Signed-off-by: Shradha Todi <[email protected]>
> ---
> v1: https://lkml.org/lkml/2020/12/20/187
> v2:
> Addressed Rob's review comment and added PCI version check condition to
> avoid writing to reserved registers.
>
> drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 8 insertions(+), 2 deletions(-)

Reviewed-by: Rob Herring <[email protected]>

2021-02-01 18:59:19

by Lorenzo Pieralisi

Subject: Re: [PATCH v2] PCI: dwc: Add upper limit address for outbound iATU

On Wed, Jan 06, 2021 at 04:20:10PM +0530, Shradha Todi wrote:
> The size parameter is unsigned long type which can accept size > 4GB. In
> that case, the upper limit address must be programmed. Add support to
> program the upper limit address and set INCREASE_REGION_SIZE in case size >
> 4GB.
>
> Signed-off-by: Shradha Todi <[email protected]>
> ---
> v1: https://lkml.org/lkml/2020/12/20/187
> v2:
> Addressed Rob's review comment and added PCI version check condition to
> avoid writing to reserved registers.
>
> drivers/pci/controller/dwc/pcie-designware.c | 9 +++++++--
> drivers/pci/controller/dwc/pcie-designware.h | 1 +
> 2 files changed, 8 insertions(+), 2 deletions(-)

Does not apply to my pci/dwc branch, please rebase it on top of it
and resend it while keeping review tags.

Thanks,
Lorenzo

>
> diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> index 74590c7..1d62ca9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.c
> +++ b/drivers/pci/controller/dwc/pcie-designware.c
> @@ -290,12 +290,17 @@ static void __dw_pcie_prog_outbound_atu(struct dw_pcie *pci, u8 func_no,
> upper_32_bits(cpu_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
> lower_32_bits(cpu_addr + size - 1));
> + if (pci->version >= 0x460A)
> + dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_LIMIT,
> + upper_32_bits(cpu_addr + size - 1));
> dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
> lower_32_bits(pci_addr));
> dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
> upper_32_bits(pci_addr));
> - dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type |
> - PCIE_ATU_FUNC_NUM(func_no));
> + val = type | PCIE_ATU_FUNC_NUM(func_no);
> + val = ((upper_32_bits(size - 1)) && (pci->version >= 0x460A)) ?
> + val | PCIE_ATU_INCREASE_REGION_SIZE : val;
> + dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, val);
> dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
>
> /*
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 8b905a2..7da79eb 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -102,6 +102,7 @@
> #define PCIE_ATU_DEV(x) FIELD_PREP(GENMASK(23, 19), x)
> #define PCIE_ATU_FUNC(x) FIELD_PREP(GENMASK(18, 16), x)
> #define PCIE_ATU_UPPER_TARGET 0x91C
> +#define PCIE_ATU_UPPER_LIMIT 0x924
>
> #define PCIE_MISC_CONTROL_1_OFF 0x8BC
> #define PCIE_DBI_RO_WR_EN BIT(0)
> --
> 2.7.4
>