This clock is needed by DCSS when high resolutions are used.
Signed-off-by: Laurentiu Palcu <[email protected]>
CC: Abel Vesa <[email protected]>
---
drivers/clk/imx/clk-imx8mq.c | 4 ++++
include/dt-bindings/clock/imx8mq-clock.h | 4 +++-
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-imx8mq.c b/drivers/clk/imx/clk-imx8mq.c
index 41fc9c6..05ece7b 100644
--- a/drivers/clk/imx/clk-imx8mq.c
+++ b/drivers/clk/imx/clk-imx8mq.c
@@ -38,6 +38,7 @@ static const char * const sys1_pll_out_sels[] = {"sys1_pll1_ref_sel", };
static const char * const sys2_pll_out_sels[] = {"sys1_pll1_ref_sel", "sys2_pll1_ref_sel", };
static const char * const sys3_pll_out_sels[] = {"sys3_pll1_ref_sel", "sys2_pll1_ref_sel", };
static const char * const dram_pll_out_sels[] = {"dram_pll1_ref_sel", };
+static const char * const video2_pll_out_sels[] = {"video2_pll1_ref_sel", };
/* CCM ROOT */
static const char * const imx8mq_a53_sels[] = {"osc_25m", "arm_pll_out", "sys2_pll_500m", "sys2_pll_1000m",
@@ -311,6 +312,7 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
clks[IMX8MQ_SYS2_PLL1_REF_SEL] = imx_clk_mux("sys2_pll1_ref_sel", base + 0x3c, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
clks[IMX8MQ_SYS3_PLL1_REF_SEL] = imx_clk_mux("sys3_pll1_ref_sel", base + 0x48, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
clks[IMX8MQ_DRAM_PLL1_REF_SEL] = imx_clk_mux("dram_pll1_ref_sel", base + 0x60, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
+ clks[IMX8MQ_VIDEO2_PLL1_REF_SEL] = imx_clk_mux("video2_pll1_ref_sel", base + 0x54, 0, 2, pll_ref_sels, ARRAY_SIZE(pll_ref_sels));
clks[IMX8MQ_ARM_PLL_REF_DIV] = imx_clk_divider("arm_pll_ref_div", "arm_pll_ref_sel", base + 0x28, 5, 6);
clks[IMX8MQ_GPU_PLL_REF_DIV] = imx_clk_divider("gpu_pll_ref_div", "gpu_pll_ref_sel", base + 0x18, 5, 6);
@@ -346,6 +348,8 @@ static int imx8mq_clocks_probe(struct platform_device *pdev)
clks[IMX8MQ_SYS2_PLL_OUT] = imx_clk_sccg_pll("sys2_pll_out", sys2_pll_out_sels, ARRAY_SIZE(sys2_pll_out_sels), 0, 0, 1, base + 0x3c, CLK_IS_CRITICAL);
clks[IMX8MQ_SYS3_PLL_OUT] = imx_clk_sccg_pll("sys3_pll_out", sys3_pll_out_sels, ARRAY_SIZE(sys3_pll_out_sels), 0, 0, 1, base + 0x48, CLK_IS_CRITICAL);
clks[IMX8MQ_DRAM_PLL_OUT] = imx_clk_sccg_pll("dram_pll_out", dram_pll_out_sels, ARRAY_SIZE(dram_pll_out_sels), 0, 0, 0, base + 0x60, CLK_IS_CRITICAL);
+ clks[IMX8MQ_VIDEO2_PLL_OUT] = imx_clk_sccg_pll("video2_pll_out", video2_pll_out_sels, ARRAY_SIZE(video2_pll_out_sels), 0, 0, 0, base + 0x54, 0);
+
/* SYS PLL fixed output */
clks[IMX8MQ_SYS1_PLL_40M] = imx_clk_fixed_factor("sys1_pll_40m", "sys1_pll_out", 1, 20);
clks[IMX8MQ_SYS1_PLL_80M] = imx_clk_fixed_factor("sys1_pll_80m", "sys1_pll_out", 1, 10);
diff --git a/include/dt-bindings/clock/imx8mq-clock.h b/include/dt-bindings/clock/imx8mq-clock.h
index 6546367..35b9ed9 100644
--- a/include/dt-bindings/clock/imx8mq-clock.h
+++ b/include/dt-bindings/clock/imx8mq-clock.h
@@ -403,5 +403,7 @@
#define IMX8MQ_CLK_SNVS_ROOT 264
#define IMX8MQ_CLK_GIC 265
-#define IMX8MQ_CLK_END 266
+#define IMX8MQ_VIDEO2_PLL1_REF_SEL 266
+
+#define IMX8MQ_CLK_END 267
#endif /* __DT_BINDINGS_CLOCK_IMX8MQ_H */
--
2.7.4
On Wed, Oct 02, 2019 at 05:04:53PM +0300, Laurentiu Palcu wrote:
> This clock is needed by DCSS when high resolutions are used.
>
> Signed-off-by: Laurentiu Palcu <[email protected]>
> CC: Abel Vesa <[email protected]>
Applied, thanks.