i.MX8DXL is a dual Cortex-A35 proccessor with Cortex-M4 system controller
inside. Add the SoC dtsi file support.
Signed-off-by: Anson Huang <[email protected]>
---
This patch needs pads-imx8dxl.h which is in below patch series:
https://patchwork.kernel.org/patch/11462211/
---
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 416 +++++++++++++++++++++++++++++
1 file changed, 416 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
new file mode 100644
index 0000000..4d4b287
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019~2020 NXP
+ */
+
+#include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/firmware/imx/rsrc.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/pads-imx8dxl.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ gpio0 = &lsio_gpio0;
+ gpio1 = &lsio_gpio1;
+ gpio2 = &lsio_gpio2;
+ gpio3 = &lsio_gpio3;
+ gpio4 = &lsio_gpio4;
+ gpio5 = &lsio_gpio5;
+ gpio6 = &lsio_gpio6;
+ gpio7 = &lsio_gpio7;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mu1 = &lsio_mu1;
+ serial0 = &adma_lpuart0;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ /* We have 1 clusters with 2 Cortex-A35 cores */
+ A35_0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ next-level-cache = <&A35_L2>;
+ clocks = <&clk IMX_A35_CLK>;
+ operating-points-v2 = <&a35_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ A35_1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a35";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ next-level-cache = <&A35_L2>;
+ clocks = <&clk IMX_A35_CLK>;
+ operating-points-v2 = <&a35_opp_table>;
+ #cooling-cells = <2>;
+ };
+
+ A35_L2: l2-cache0 {
+ compatible = "cache";
+ };
+ };
+
+ a35_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1000000>;
+ clock-latency-ns = <150000>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <150000>;
+ opp-suspend;
+ };
+ };
+
+ gic: interrupt-controller@51a00000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
+ <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ scu {
+ compatible = "fsl,imx-scu";
+ mbox-names = "tx0", "tx1", "tx2", "tx3",
+ "rx0", "rx1", "rx2", "rx3",
+ "gip3";
+ mboxes = <&lsio_mu1 0 0
+ &lsio_mu1 0 1
+ &lsio_mu1 0 2
+ &lsio_mu1 0 3
+ &lsio_mu1 1 0
+ &lsio_mu1 1 1
+ &lsio_mu1 1 2
+ &lsio_mu1 1 3
+ &lsio_mu1 3 3>;
+
+ clk: clock-controller {
+ compatible = "fsl,imx8dxl-clk", "fsl,imx8qxp-clk";
+ #clock-cells = <1>;
+ clocks = <&xtal32k &xtal24m>;
+ clock-names = "xtal_32KHz", "xtal_24Mhz";
+ };
+
+ iomuxc: pinctrl {
+ compatible = "fsl,imx8dxl-iomuxc";
+ };
+
+ ocotp: imx8qx-ocotp {
+ compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ pd: imx8qx-pd {
+ compatible = "fsl,imx8dxl-scu-pd", "fsl,imx8qxp-scu-pd";
+ #power-domain-cells = <1>;
+ };
+
+ scu_key: scu-key {
+ compatible = "fsl,imx8dxl-sc-key", "fsl,imx-sc-key";
+ linux,keycodes = <KEY_POWER>;
+ status = "disabled";
+ };
+
+ rtc: rtc {
+ compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx8qxp-sc-rtc";
+ };
+
+ tsens: thermal-sensor {
+ compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal";
+ #thermal-sensor-cells = <1>;
+ };
+
+ watchdog {
+ compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt";
+ timeout-sec = <60>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
+ };
+
+ xtal32k: clock-xtal32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "xtal_32KHz";
+ };
+
+ xtal24m: clock-xtal24m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal_24MHz";
+ };
+
+ adma_subsys: bus@59000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x59000000 0x0 0x59000000 0x2000000>;
+
+ adma_lpcg: clock-controller@59000000 {
+ compatible = "fsl,imx8dxl-lpcg-adma", "fsl,imx8qxp-lpcg-adma";
+ reg = <0x59000000 0x2000000>;
+ #clock-cells = <1>;
+ };
+
+ adma_lpuart0: serial@5a060000 {
+ compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
+ reg = <0x5a060000 0x1000>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
+ <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
+ clock-names = "ipg", "baud";
+ power-domains = <&pd IMX_SC_R_UART_0>;
+ status = "disabled";
+ };
+ };
+
+ conn_subsys: bus@5b000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
+
+ conn_lpcg: clock-controller@5b200000 {
+ compatible = "fsl,imx8dxl-lpcg-conn", "fsl,imx8qxp-lpcg-conn";
+ reg = <0x5b200000 0xb0000>;
+ #clock-cells = <1>;
+ };
+
+ usdhc1: mmc@5b010000 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx7d-usdhc";
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b010000 0x10000>;
+ clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ power-domains = <&pd IMX_SC_R_SDHC_0>;
+ status = "disabled";
+ };
+
+ usdhc2: mmc@5b020000 {
+ compatible = "fsl,imx8dxl-usdhc", "fsl,imx7d-usdhc";
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b020000 0x10000>;
+ clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ power-domains = <&pd IMX_SC_R_SDHC_1>;
+ fsl,tuning-start-tap = <20>;
+ fsl,tuning-step= <2>;
+ status = "disabled";
+ };
+ };
+
+ lsio_subsys: bus@5d000000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
+
+ lsio_gpio0: gpio@5d080000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d080000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_0>;
+ };
+
+ lsio_gpio1: gpio@5d090000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d090000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_1>;
+ };
+
+ lsio_gpio2: gpio@5d0a0000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0a0000 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_2>;
+ };
+
+ lsio_gpio3: gpio@5d0b0000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0b0000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_3>;
+ };
+
+ lsio_gpio4: gpio@5d0c0000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0c0000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_4>;
+ };
+
+ lsio_gpio5: gpio@5d0d0000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0d0000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_5>;
+ };
+
+ lsio_gpio6: gpio@5d0e0000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0e0000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_6>;
+ };
+
+ lsio_gpio7: gpio@5d0f0000 {
+ compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
+ reg = <0x5d0f0000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ power-domains = <&pd IMX_SC_R_GPIO_7>;
+ };
+
+ lsio_mu0: mailbox@5d1b0000 {
+ compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1b0000 0x10000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu1: mailbox@5d1c0000 {
+ compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1c0000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ };
+
+ lsio_mu2: mailbox@5d1d0000 {
+ compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1d0000 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu3: mailbox@5d1e0000 {
+ compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1e0000 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_mu4: mailbox@5d1f0000 {
+ compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
+ reg = <0x5d1f0000 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ status = "disabled";
+ };
+
+ lsio_lpcg: clock-controller@5d400000 {
+ compatible = "fsl,imx8dxl-lpcg-lsio", "fsl,imx8qxp-lpcg-lsio";
+ reg = <0x5d400000 0x400000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ thermal_zones: thermal-zones {
+ cpu-thermal0 {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <107000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <127000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+};
--
2.7.4
> From: Anson Huang <[email protected]>
> Sent: Saturday, March 28, 2020 7:14 PM
>
> i.MX8DXL is a dual Cortex-A35 proccessor with Cortex-M4 system controller
> inside. Add the SoC dtsi file support.
>
> Signed-off-by: Anson Huang <[email protected]>
As we know that old clock binding will not be used and maintained anymore and all device node
will be moved Into each SS dtsi, so I'm not sure if we should still introduce such a big change using
the known deprecated things now. May be better to hold on a bit and wait for Shawn's suggestion
on the pending dts re-org patchset first.
Regards
Aisheng
> ---
> ---
> arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 416
> +++++++++++++++++++++++++++++
> 1 file changed, 416 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> new file mode 100644
> index 0000000..4d4b287
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> @@ -0,0 +1,416 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020 NXP
> + */
> +
> +#include <dt-bindings/clock/imx8-clock.h> #include
> +<dt-bindings/firmware/imx/rsrc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/pinctrl/pads-imx8dxl.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + gpio0 = &lsio_gpio0;
> + gpio1 = &lsio_gpio1;
> + gpio2 = &lsio_gpio2;
> + gpio3 = &lsio_gpio3;
> + gpio4 = &lsio_gpio4;
> + gpio5 = &lsio_gpio5;
> + gpio6 = &lsio_gpio6;
> + gpio7 = &lsio_gpio7;
> + mmc0 = &usdhc1;
> + mmc1 = &usdhc2;
> + mu1 = &lsio_mu1;
> + serial0 = &adma_lpuart0;
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + /* We have 1 clusters with 2 Cortex-A35 cores */
> + A35_0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&A35_L2>;
> + clocks = <&clk IMX_A35_CLK>;
> + operating-points-v2 = <&a35_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + A35_1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + next-level-cache = <&A35_L2>;
> + clocks = <&clk IMX_A35_CLK>;
> + operating-points-v2 = <&a35_opp_table>;
> + #cooling-cells = <2>;
> + };
> +
> + A35_L2: l2-cache0 {
> + compatible = "cache";
> + };
> + };
> +
> + a35_opp_table: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <1000000>;
> + clock-latency-ns = <150000>;
> + };
> +
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1100000>;
> + clock-latency-ns = <150000>;
> + opp-suspend;
> + };
> + };
> +
> + gic: interrupt-controller@51a00000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
> + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base)
> */
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + scu {
> + compatible = "fsl,imx-scu";
> + mbox-names = "tx0", "tx1", "tx2", "tx3",
> + "rx0", "rx1", "rx2", "rx3",
> + "gip3";
> + mboxes = <&lsio_mu1 0 0
> + &lsio_mu1 0 1
> + &lsio_mu1 0 2
> + &lsio_mu1 0 3
> + &lsio_mu1 1 0
> + &lsio_mu1 1 1
> + &lsio_mu1 1 2
> + &lsio_mu1 1 3
> + &lsio_mu1 3 3>;
> +
> + clk: clock-controller {
> + compatible = "fsl,imx8dxl-clk", "fsl,imx8qxp-clk";
> + #clock-cells = <1>;
> + clocks = <&xtal32k &xtal24m>;
> + clock-names = "xtal_32KHz", "xtal_24Mhz";
> + };
> +
> + iomuxc: pinctrl {
> + compatible = "fsl,imx8dxl-iomuxc";
> + };
> +
> + ocotp: imx8qx-ocotp {
> + compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + pd: imx8qx-pd {
> + compatible = "fsl,imx8dxl-scu-pd", "fsl,imx8qxp-scu-pd";
> + #power-domain-cells = <1>;
> + };
> +
> + scu_key: scu-key {
> + compatible = "fsl,imx8dxl-sc-key", "fsl,imx-sc-key";
> + linux,keycodes = <KEY_POWER>;
> + status = "disabled";
> + };
> +
> + rtc: rtc {
> + compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx8qxp-sc-rtc";
> + };
> +
> + tsens: thermal-sensor {
> + compatible = "fsl,imx8dxl-sc-thermal", "fsl,imx-sc-thermal";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + watchdog {
> + compatible = "fsl,imx8dxl-sc-wdt", "fsl,imx-sc-wdt";
> + timeout-sec = <60>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure
> */
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical
> Non-Secure */
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
> + };
> +
> + xtal32k: clock-xtal32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "xtal_32KHz";
> + };
> +
> + xtal24m: clock-xtal24m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + clock-output-names = "xtal_24MHz";
> + };
> +
> + adma_subsys: bus@59000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x59000000 0x0 0x59000000 0x2000000>;
> +
> + adma_lpcg: clock-controller@59000000 {
> + compatible = "fsl,imx8dxl-lpcg-adma", "fsl,imx8qxp-lpcg-adma";
> + reg = <0x59000000 0x2000000>;
> + #clock-cells = <1>;
> + };
> +
> + adma_lpuart0: serial@5a060000 {
> + compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
> + reg = <0x5a060000 0x1000>;
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
> + <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
> + clock-names = "ipg", "baud";
> + power-domains = <&pd IMX_SC_R_UART_0>;
> + status = "disabled";
> + };
> + };
> +
> + conn_subsys: bus@5b000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
> +
> + conn_lpcg: clock-controller@5b200000 {
> + compatible = "fsl,imx8dxl-lpcg-conn", "fsl,imx8qxp-lpcg-conn";
> + reg = <0x5b200000 0xb0000>;
> + #clock-cells = <1>;
> + };
> +
> + usdhc1: mmc@5b010000 {
> + compatible = "fsl,imx8dxl-usdhc", "fsl,imx7d-usdhc";
> + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x5b010000 0x10000>;
> + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
> + <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
> + <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
> + clock-names = "ipg", "per", "ahb";
> + power-domains = <&pd IMX_SC_R_SDHC_0>;
> + status = "disabled";
> + };
> +
> + usdhc2: mmc@5b020000 {
> + compatible = "fsl,imx8dxl-usdhc", "fsl,imx7d-usdhc";
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x5b020000 0x10000>;
> + clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
> + <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
> + <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
> + clock-names = "ipg", "per", "ahb";
> + power-domains = <&pd IMX_SC_R_SDHC_1>;
> + fsl,tuning-start-tap = <20>;
> + fsl,tuning-step= <2>;
> + status = "disabled";
> + };
> + };
> +
> + lsio_subsys: bus@5d000000 {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
> +
> + lsio_gpio0: gpio@5d080000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d080000 0x10000>;
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_0>;
> + };
> +
> + lsio_gpio1: gpio@5d090000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d090000 0x10000>;
> + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_1>;
> + };
> +
> + lsio_gpio2: gpio@5d0a0000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d0a0000 0x10000>;
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_2>;
> + };
> +
> + lsio_gpio3: gpio@5d0b0000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d0b0000 0x10000>;
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_3>;
> + };
> +
> + lsio_gpio4: gpio@5d0c0000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d0c0000 0x10000>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_4>;
> + };
> +
> + lsio_gpio5: gpio@5d0d0000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d0d0000 0x10000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_5>;
> + };
> +
> + lsio_gpio6: gpio@5d0e0000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d0e0000 0x10000>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_6>;
> + };
> +
> + lsio_gpio7: gpio@5d0f0000 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + reg = <0x5d0f0000 0x10000>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + power-domains = <&pd IMX_SC_R_GPIO_7>;
> + };
> +
> + lsio_mu0: mailbox@5d1b0000 {
> + compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
> + reg = <0x5d1b0000 0x10000>;
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + lsio_mu1: mailbox@5d1c0000 {
> + compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
> + reg = <0x5d1c0000 0x10000>;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + };
> +
> + lsio_mu2: mailbox@5d1d0000 {
> + compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
> + reg = <0x5d1d0000 0x10000>;
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + lsio_mu3: mailbox@5d1e0000 {
> + compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
> + reg = <0x5d1e0000 0x10000>;
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + lsio_mu4: mailbox@5d1f0000 {
> + compatible = "fsl,imx8dxl-mu", "fsl,imx6sx-mu";
> + reg = <0x5d1f0000 0x10000>;
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> + lsio_lpcg: clock-controller@5d400000 {
> + compatible = "fsl,imx8dxl-lpcg-lsio", "fsl,imx8qxp-lpcg-lsio";
> + reg = <0x5d400000 0x400000>;
> + #clock-cells = <1>;
> + };
> + };
> +
> + thermal_zones: thermal-zones {
> + cpu-thermal0 {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
> +
> + trips {
> + cpu_alert0: trip0 {
> + temperature = <107000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit0: trip1 {
> + temperature = <127000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_alert0>;
> + cooling-device =
> + <&A35_0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&A35_1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +};
> --
> 2.7.4