Convert the i.MX6Q clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- Force 'interrupts' minItem/maxItem to 2.
---
.../devicetree/bindings/clock/imx6q-clock.txt | 41 -------------
.../devicetree/bindings/clock/imx6q-clock.yaml | 67 ++++++++++++++++++++++
2 files changed, 67 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
deleted file mode 100644
index 13d36d4..0000000
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-* Clock bindings for Freescale i.MX6 Quad
-
-Required properties:
-- compatible: Should be "fsl,imx6q-ccm"
-- reg: Address and length of the register set
-- interrupts: Should contain CCM interrupt
-- #clock-cells: Should be <1>
-
-Optional properties:
-- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
- on power off.
- Use this property if the SoC should be powered off by external power
- management IC (PMIC) triggered via PMIC_STBY_REQ signal.
- Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
- be using "syscon-poweroff" driver instead.
-- clocks: list of clock specifiers, must contain an entry for each entry
- in clock-names
-- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
-for the full list of i.MX6 Quad and DualLite clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6qdl-clock.h>
-
-clks: ccm@20c4000 {
- compatible = "fsl,imx6q-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <0 87 0x04 0 88 0x04>;
- #clock-cells = <1>;
-};
-
-uart1: serial@2020000 {
- compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <0 26 0x04>;
- clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
new file mode 100644
index 0000000..0daf789
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 Quad
+
+maintainers:
+ - Anson Huang <[email protected]>
+
+properties:
+ compatible:
+ const: fsl,imx6q-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 24m osc
+ - description: 32k osc
+ - description: ckih1 clock input
+ - description: anaclk1 clock input
+ - description: anaclk2 clock input
+
+ clock-names:
+ items:
+ - const: osc
+ - const: ckil
+ - const: ckih1
+ - const: anaclk1
+ - const: anaclk2
+
+ fsl,pmic-stby-poweroff:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Use this property if the SoC should be powered off by external power
+ management IC (PMIC) triggered via PMIC_STBY_REQ signal.
+ Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
+ be using "syscon-poweroff" driver instead.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clks: clock-controller@20c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
--
2.7.4
Convert the i.MX6UL clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- Force 'interrupts' minItem/maxItem to 2.
---
.../devicetree/bindings/clock/imx6ul-clock.txt | 13 -----
.../devicetree/bindings/clock/imx6ul-clock.yaml | 61 ++++++++++++++++++++++
2 files changed, 61 insertions(+), 13 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx6ul-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt b/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
deleted file mode 100644
index 571d503..0000000
--- a/Documentation/devicetree/bindings/clock/imx6ul-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX6 UltraLite
-
-Required properties:
-- compatible: Should be "fsl,imx6ul-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6ul-clock.h
-for the full list of i.MX6 UltraLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
new file mode 100644
index 0000000..f742b65
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6ul-clock.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6ul-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 UltraLite
+
+maintainers:
+ - Anson Huang <[email protected]>
+
+properties:
+ compatible:
+ const: fsl,imx6ul-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clks: clock-controller@20c4000 {
+ compatible = "fsl,imx6ul-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
--
2.7.4
Convert the i.MX6SX clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- Force 'interrupts' minItem/maxItem to 2.
---
.../devicetree/bindings/clock/imx6sx-clock.txt | 13 -----
.../devicetree/bindings/clock/imx6sx-clock.yaml | 65 ++++++++++++++++++++++
2 files changed, 65 insertions(+), 13 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx6sx-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt b/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
deleted file mode 100644
index 22362b9..0000000
--- a/Documentation/devicetree/bindings/clock/imx6sx-clock.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-* Clock bindings for Freescale i.MX6 SoloX
-
-Required properties:
-- compatible: Should be "fsl,imx6sx-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sx-clock.h
-for the full list of i.MX6 SoloX clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
new file mode 100644
index 0000000..d3d875f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sx-clock.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sx-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloX
+
+maintainers:
+ - Anson Huang <[email protected]>
+
+properties:
+ compatible:
+ const: fsl,imx6sx-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+ - description: anaclk1 clock input
+ - description: anaclk2 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+ - const: anaclk1
+ - const: anaclk2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clks: clock-controller@20c4000 {
+ compatible = "fsl,imx6sx-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>, <&anaclk1>, <&anaclk2>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1", "anaclk1", "anaclk2";
+ };
--
2.7.4
Convert the i.MX6SLL clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- Force 'interrupts' minItem/maxItem to 2.
---
.../devicetree/bindings/clock/imx6sll-clock.txt | 36 -------------
.../devicetree/bindings/clock/imx6sll-clock.yaml | 61 ++++++++++++++++++++++
2 files changed, 61 insertions(+), 36 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
deleted file mode 100644
index fee849d..0000000
--- a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
+++ /dev/null
@@ -1,36 +0,0 @@
-* Clock bindings for Freescale i.MX6 SLL
-
-Required properties:
-- compatible: Should be "fsl,imx6sll-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-- clocks: list of clock specifiers, must contain an entry for each required
- entry in clock-names
-- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sll-clock.h
-for the full list of i.MX6 SLL clock IDs.
-
-Examples:
-
-#include <dt-bindings/clock/imx6sll-clock.h>
-
-clks: clock-controller@20c4000 {
- compatible = "fsl,imx6sll-ccm";
- reg = <0x020c4000 0x4000>;
- interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
- clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
-};
-
-uart1: serial@2020000 {
- compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
- reg = <0x02020000 0x4000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
- <&clks IMX6SLL_CLK_UART1_SERIAL>;
- clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
new file mode 100644
index 0000000..f22b203
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sll-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SLL
+
+maintainers:
+ - Anson Huang <[email protected]>
+
+properties:
+ compatible:
+ const: fsl,imx6sll-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+ clocks:
+ items:
+ - description: 32k osc
+ - description: 24m osc
+ - description: ipp_di0 clock input
+ - description: ipp_di1 clock input
+
+ clock-names:
+ items:
+ - const: ckil
+ - const: osc
+ - const: ipp_di0
+ - const: ipp_di1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+ - clocks
+ - clock-names
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clks: clock-controller@20c4000 {
+ compatible = "fsl,imx6sll-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+ clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+ };
--
2.7.4
Convert the i.MX6SL clock binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <[email protected]>
---
Changes since V2:
- Force 'interrupts' minItem/maxItem to 2.
---
.../devicetree/bindings/clock/imx6sl-clock.txt | 10 -----
.../devicetree/bindings/clock/imx6sl-clock.yaml | 43 ++++++++++++++++++++++
2 files changed, 43 insertions(+), 10 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx6sl-clock.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt b/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
deleted file mode 100644
index 15e40bd..0000000
--- a/Documentation/devicetree/bindings/clock/imx6sl-clock.txt
+++ /dev/null
@@ -1,10 +0,0 @@
-* Clock bindings for Freescale i.MX6 SoloLite
-
-Required properties:
-- compatible: Should be "fsl,imx6sl-ccm"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6sl-clock.h
-for the full list of i.MX6 SoloLite clock IDs.
diff --git a/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
new file mode 100644
index 0000000..f78ee4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sl-clock.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx6sl-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock bindings for Freescale i.MX6 SoloLite
+
+maintainers:
+ - Anson Huang <[email protected]>
+
+properties:
+ compatible:
+ const: fsl,imx6sl-ccm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - '#clock-cells'
+
+examples:
+ # Clock Control Module node:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clks: clock-controller@20c4000 {
+ compatible = "fsl,imx6sl-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ };
--
2.7.4
Hi Anson,
thanks for the patches :) one last nitpick.
On 20-04-17 08:41, Anson Huang wrote:
...
> +examples:
> + # Clock Control Module node:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + clks: clock-controller@20c4000 {
> + compatible = "fsl,imx6q-ccm";
> + reg = <0x020c4000 0x4000>;
> + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
> + <0 88 IRQ_TYPE_LEVEL_HIGH>;
The imx6ull and others start using the GIC_SPI define within the
example. We should take the chance to uniform that. Apart of this feel
free to add my:
Reviewed-by: Marco Felsch <[email protected]>
Regards,
Marco
> + #clock-cells = <1>;
> + };
Hi, Marco
> Subject: Re: [PATCH V3 1/5] dt-bindings: clock: Convert i.MX6Q clock to
> json-schema
>
> Hi Anson,
>
> thanks for the patches :) one last nitpick.
>
> On 20-04-17 08:41, Anson Huang wrote:
>
> ...
>
> > +examples:
> > + # Clock Control Module node:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + clks: clock-controller@20c4000 {
> > + compatible = "fsl,imx6q-ccm";
> > + reg = <0x020c4000 0x4000>;
> > + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
> > + <0 88 IRQ_TYPE_LEVEL_HIGH>;
>
> The imx6ull and others start using the GIC_SPI define within the example. We
> should take the chance to uniform that. Apart of this feel free to add my:
>
> Reviewed-by: Marco Felsch <[email protected]>
OK, if there is other comments that need to send next version, I will change it.
Thanks,
Anson
On Fri, Apr 17, 2020 at 08:41:27AM +0800, Anson Huang wrote:
> Convert the i.MX6Q clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> Changes since V2:
> - Force 'interrupts' minItem/maxItem to 2.
Not necessary. maxItems is sufficient.
> ---
> .../devicetree/bindings/clock/imx6q-clock.txt | 41 -------------
> .../devicetree/bindings/clock/imx6q-clock.yaml | 67 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+), 41 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> deleted file mode 100644
> index 13d36d4..0000000
> --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -* Clock bindings for Freescale i.MX6 Quad
> -
> -Required properties:
> -- compatible: Should be "fsl,imx6q-ccm"
> -- reg: Address and length of the register set
> -- interrupts: Should contain CCM interrupt
> -- #clock-cells: Should be <1>
> -
> -Optional properties:
> -- fsl,pmic-stby-poweroff: Configure CCM to assert PMIC_STBY_REQ signal
> - on power off.
> - Use this property if the SoC should be powered off by external power
> - management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> - Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> - be using "syscon-poweroff" driver instead.
> -- clocks: list of clock specifiers, must contain an entry for each entry
> - in clock-names
> -- clock-names: valid names are "osc", "ckil", "ckih1", "anaclk1" and "anaclk2"
> -
> -The clock consumer should specify the desired clock by having the clock
> -ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h
> -for the full list of i.MX6 Quad and DualLite clock IDs.
> -
> -Examples:
> -
> -#include <dt-bindings/clock/imx6qdl-clock.h>
> -
> -clks: ccm@20c4000 {
> - compatible = "fsl,imx6q-ccm";
> - reg = <0x020c4000 0x4000>;
> - interrupts = <0 87 0x04 0 88 0x04>;
> - #clock-cells = <1>;
> -};
> -
> -uart1: serial@2020000 {
> - compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
> - reg = <0x02020000 0x4000>;
> - interrupts = <0 26 0x04>;
> - clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
> - clock-names = "ipg", "per";
> -};
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> new file mode 100644
> index 0000000..0daf789
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/imx6q-clock.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Clock bindings for Freescale i.MX6 Quad
> +
> +maintainers:
> + - Anson Huang <[email protected]>
> +
> +properties:
> + compatible:
> + const: fsl,imx6q-ccm
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + minItems: 2
> + maxItems: 2
> +
> + '#clock-cells':
> + const: 1
> +
> + clocks:
> + items:
> + - description: 24m osc
> + - description: 32k osc
> + - description: ckih1 clock input
> + - description: anaclk1 clock input
> + - description: anaclk2 clock input
> +
> + clock-names:
> + items:
> + - const: osc
> + - const: ckil
> + - const: ckih1
> + - const: anaclk1
> + - const: anaclk2
> +
> + fsl,pmic-stby-poweroff:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description: |
> + Use this property if the SoC should be powered off by external power
> + management IC (PMIC) triggered via PMIC_STBY_REQ signal.
> + Boards that are designed to initiate poweroff on PMIC_ON_REQ signal should
> + be using "syscon-poweroff" driver instead.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - '#clock-cells'
> +
> +examples:
> + # Clock Control Module node:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + clks: clock-controller@20c4000 {
Drop the label.
> + compatible = "fsl,imx6q-ccm";
> + reg = <0x020c4000 0x4000>;
> + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>,
> + <0 88 IRQ_TYPE_LEVEL_HIGH>;
> + #clock-cells = <1>;
> + };
> --
> 2.7.4
>
On Fri, Apr 17, 2020 at 08:41:27AM +0800, Anson Huang wrote:
> Convert the i.MX6Q clock binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> Changes since V2:
> - Force 'interrupts' minItem/maxItem to 2.
> ---
> .../devicetree/bindings/clock/imx6q-clock.txt | 41 -------------
> .../devicetree/bindings/clock/imx6q-clock.yaml | 67 ++++++++++++++++++++++
> 2 files changed, 67 insertions(+), 41 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.yaml b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> new file mode 100644
> index 0000000..0daf789
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.yaml
> @@ -0,0 +1,67 @@
> +# SPDX-License-Identifier: GPL-2.0
If NXP is the only author on these, please dual license:
(GPL-2.0-only OR BSD-2-Clause)