Tegra210/Tegra186/Tegra194 has incorrectly enabled
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK from the beginning of their support.
Tegra210 and later SDMMC hardware default uses sdmmc_legacy_tm (TMCLK)
all the time for hardware data timeout instead of SDCLK and this TMCLK
need to be kept enabled by Tegra sdmmc driver.
This series includes manual backport patches to fix this for stable
kernel #4.19
Note:
Patch series v2 is same as v1 except updated commit message in all patches
properly for backporting.
Sowjanya Komatineni (7):
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra210
sdhci: tegra: Remove SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK for Tegra186
dt-bindings: mmc: tegra: Add tmclk for Tegra210 and Tegra186
arm64: tegra: Add missing timeout clock to Tegra210 SDMMC
arm64: tegra: Add missing timeout clock to Tegra186 SDMMC nodes
arm64: tegra: Add missing timeout clock to Tegra194 SDMMC nodes
sdhci: tegra: Add missing TMCLK for data timeout
.../bindings/mmc/nvidia,tegra20-sdhci.txt | 23 +++++++++-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 20 +++++----
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 15 ++++---
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 28 ++++++------
drivers/mmc/host/sdhci-tegra.c | 50 +++++++++++++++++++++-
5 files changed, 106 insertions(+), 30 deletions(-)
--
2.7.4
Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra
SDMMC hawdware for data timeout to achive better timeout than using
SDCLK and using TMCLK is recommended.
Enabling TMCLK was missed when Tegra210 support was added to the driver
in commit b5a84ecf025a ("mmc: tegra: Add Tegra210 support"),
USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register
SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or
SDCLK for data timeout.
Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used
for data timeout by Tegra SDMMC hardware and having TMCLK not enabled
is not recommended.
So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate
timeout clock and keeps TMCLK enabled all the time.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <[email protected]> # 4.19
Tested-by: Jon Hunter <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
drivers/mmc/host/sdhci-tegra.c | 48 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 5a7c032..ff3340c 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -56,6 +56,12 @@
#define NVQUIRK_ENABLE_DDR50 BIT(5)
#define NVQUIRK_HAS_PADCALIB BIT(6)
+/*
+ * NVQUIRK_HAS_TMCLK is for SoC's having separate timeout clock for Tegra
+ * SDMMC hardware data timeout.
+ */
+#define NVQUIRK_HAS_TMCLK BIT(10)
+
struct sdhci_tegra_soc_data {
const struct sdhci_pltfm_data *pdata;
u32 nvquirks;
@@ -64,6 +70,7 @@ struct sdhci_tegra_soc_data {
struct sdhci_tegra {
const struct sdhci_tegra_soc_data *soc_data;
struct gpio_desc *power_gpio;
+ struct clk *tmclk;
bool ddr_signaling;
bool pad_calib_required;
@@ -433,6 +440,7 @@ static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
.pdata = &sdhci_tegra210_pdata,
+ .nvquirks = NVQUIRK_HAS_TMCLK,
};
static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
@@ -455,6 +463,7 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
static const struct sdhci_tegra_soc_data soc_data_tegra186 = {
.pdata = &sdhci_tegra186_pdata,
+ .nvquirks = NVQUIRK_HAS_TMCLK,
};
static const struct of_device_id sdhci_tegra_dt_match[] = {
@@ -510,6 +519,43 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
goto err_power_req;
}
+ /*
+ * Some Tegra SoC's has a separate SDMMC_LEGACY_TM clock used for
+ * host data timeout clock and SW can choose TMCLK or SDCLK for
+ * hardware data timeout through the bit USE_TMCLK_FOR_DATA_TIMEOUT
+ * of the register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL.
+ *
+ * USE_TMCLK_FOR_DATA_TIMEOUT bit default is set to 1 and SDMMC uses
+ * 12Mhz TMCLK which is advertised in host capability register.
+ * With TMCLK of 12Mhz provides maximum data timeout period that can
+ * be achieved is 11s better than using SDCLK for data timeout.
+ *
+ * So, TMCLK is set to 12Mhz and kept enabled all the time on SoC's
+ * supporting separate TMCLK.
+ */
+
+ if (soc_data->nvquirks & NVQUIRK_HAS_TMCLK) {
+ clk = devm_clk_get(&pdev->dev, "tmclk");
+ if (IS_ERR(clk)) {
+ rc = PTR_ERR(clk);
+ if (rc == -EPROBE_DEFER)
+ goto err_power_req;
+
+ dev_warn(&pdev->dev, "failed to get tmclk: %d\n", rc);
+ clk = NULL;
+ }
+
+ clk_set_rate(clk, 12000000);
+ rc = clk_prepare_enable(clk);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "failed to enable tmclk: %d\n", rc);
+ goto err_power_req;
+ }
+
+ tegra_host->tmclk = clk;
+ }
+
clk = devm_clk_get(mmc_dev(host->mmc), NULL);
if (IS_ERR(clk)) {
dev_err(mmc_dev(host->mmc), "clk err\n");
@@ -550,6 +596,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
err_rst_get:
clk_disable_unprepare(pltfm_host->clk);
err_clk_get:
+ clk_disable_unprepare(tegra_host->tmclk);
err_power_req:
err_parse_dt:
sdhci_pltfm_free(pdev);
@@ -567,6 +614,7 @@ static int sdhci_tegra_remove(struct platform_device *pdev)
reset_control_assert(tegra_host->rst);
usleep_range(2000, 4000);
clk_disable_unprepare(pltfm_host->clk);
+ clk_disable_unprepare(tegra_host->tmclk);
sdhci_pltfm_free(pdev);
--
2.7.4
Tegra186 uses separate SDMMC_LEGACY_TM clock for data timeout and this
clock was not enabled when Tegra186 support was added to the driver in
commit 39cb62cb8973 ("arm64: tegra: Add Tegra186 support") which is not
recommended.
Tegra186 SDMMC advertises 12Mhz as timeout clock frequency in host
capability register and uses it by default.
So, this clock should be kept enabled by the SDMMC driver.
Fixes: 39cb62cb8973 ("arm64: tegra: Add Tegra186 support")
Cc: stable <[email protected]> # 4.19
Tested-by: Jon Hunter <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index b762227..821dc5f 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -232,8 +232,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03400000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA186_CLK_SDMMC1>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA186_CLK_SDMMC1>,
+ <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC1>;
reset-names = "sdhci";
status = "disabled";
@@ -243,8 +244,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03420000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA186_CLK_SDMMC2>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA186_CLK_SDMMC2>,
+ <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC2>;
reset-names = "sdhci";
status = "disabled";
@@ -254,8 +256,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03440000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA186_CLK_SDMMC3>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA186_CLK_SDMMC3>,
+ <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC3>;
reset-names = "sdhci";
status = "disabled";
@@ -265,8 +268,9 @@
compatible = "nvidia,tegra186-sdhci";
reg = <0x0 0x03460000 0x0 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA186_CLK_SDMMC4>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA186_CLK_SDMMC4>,
+ <&bpmp TEGRA186_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA186_RESET_SDMMC4>;
reset-names = "sdhci";
status = "disabled";
--
2.7.4
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK has been set on Tegra210
ever since Tegra210 support was added to the driver in commit
b5a84ecf025a ("mmc: tegra: Add Tegra210 support").
Tegra210 SDMMC hardware by default uses timeout clock (TMCLK)
instead of SDCLK and this quirk should not be set.
So, this patch remove this quirk for Tegra210.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <[email protected]> # 4.19
Tested-by: Jon Hunter <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
drivers/mmc/host/sdhci-tegra.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 27bdf6d..731956e 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -423,7 +423,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra124 = {
static const struct sdhci_pltfm_data sdhci_tegra210_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
--
2.7.4
Tegra194 uses separate SDMMC_LEGACY_TM clock for data timeout and this
clock was not enabled when Tegra194 support was added to the driver in
commit 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree") which
is not recommended.
Tegra194 SDMMC advertises 12Mhz as timeout clock frequency in host
capability register.
So, this clock should be kept enabled by SDMMC driver.
Fixes: 5425fb15d8ee ("arm64: tegra: Add Tegra194 chip device tree")
Cc: stable <[email protected]> # 4.19
Tested-by: Jon Hunter <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 15 +++++++++------
1 file changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 9fc14bb..8a319c2 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -213,8 +213,9 @@
compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
reg = <0x03400000 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA194_CLK_SDMMC1>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA194_CLK_SDMMC1>,
+ <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
status = "disabled";
@@ -224,8 +225,9 @@
compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
reg = <0x03440000 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA194_CLK_SDMMC3>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA194_CLK_SDMMC3>,
+ <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
status = "disabled";
@@ -235,8 +237,9 @@
compatible = "nvidia,tegra194-sdhci", "nvidia,tegra186-sdhci";
reg = <0x03460000 0x10000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&bpmp TEGRA194_CLK_SDMMC4>;
- clock-names = "sdhci";
+ clocks = <&bpmp TEGRA194_CLK_SDMMC4>,
+ <&bpmp TEGRA194_CLK_SDMMC_LEGACY_TM>;
+ clock-names = "sdhci", "tmclk";
resets = <&bpmp TEGRA194_RESET_SDMMC4>;
reset-names = "sdhci";
status = "disabled";
--
2.7.4
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK has been set on Tegra186
ever since Tegra186 support was added to the driver in commit
4346b7c7941d ("mmc: tegra: Add Tegra186 support").
Tegra186 SDMMC hardware by default uses timeout clock (TMCLK) instead
of SDCLK and this quirk should not be set.
So, this patch remove this quirk for Tegra186.
Fixes: 4346b7c7941d ("mmc: tegra: Add Tegra186 support")
Cc: stable <[email protected]> # 4.19
Tested-by: Jon Hunter <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Acked-by: Adrian Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
drivers/mmc/host/sdhci-tegra.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 731956e..5a7c032 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -437,7 +437,6 @@ static const struct sdhci_tegra_soc_data soc_data_tegra210 = {
static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
.quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
SDHCI_QUIRK_SINGLE_POWER_WRITE |
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
--
2.7.4
Tegra210 uses separate SDMMC_LEGACY_TM clock for data timeout and this
clock was not enabled when Tegra210 support was added to the driver in
commit 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support") which is not
recommended.
Tegra SDMMC advertises 12Mhz as timeout clock frequency in host
capability register.
So, this clock should be kept enabled by SDMMC driver.
Fixes: 742af7e7a0a1 ("arm64: tegra: Add Tegra210 support")
Cc: stable <[email protected]> # 4.19
Tested-by: Jon Hunter <[email protected]>
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
arch/arm64/boot/dts/nvidia/tegra210.dtsi | 28 ++++++++++++++++------------
1 file changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
index 6597c08..64a0cb5 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi
@@ -1020,44 +1020,48 @@
};
sdhci@700b0000 {
- compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0000 0x0 0x200>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
- clock-names = "sdhci";
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
resets = <&tegra_car 14>;
reset-names = "sdhci";
status = "disabled";
};
sdhci@700b0200 {
- compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0200 0x0 0x200>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA210_CLK_SDMMC2>;
- clock-names = "sdhci";
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC2>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
resets = <&tegra_car 9>;
reset-names = "sdhci";
status = "disabled";
};
sdhci@700b0400 {
- compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0400 0x0 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA210_CLK_SDMMC3>;
- clock-names = "sdhci";
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC3>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
resets = <&tegra_car 69>;
reset-names = "sdhci";
status = "disabled";
};
sdhci@700b0600 {
- compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+ compatible = "nvidia,tegra210-sdhci";
reg = <0x0 0x700b0600 0x0 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA210_CLK_SDMMC4>;
- clock-names = "sdhci";
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC4>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
resets = <&tegra_car 15>;
reset-names = "sdhci";
status = "disabled";
--
2.7.4
Tegra210 and later uses separate SDMMC_LEGACY_TM clock for data
timeout.
So, this patch adds "tmclk" to Tegra sdhci clock property in the
device tree binding.
Fixes: b5a84ecf025a ("mmc: tegra: Add Tegra210 support")
Cc: stable <[email protected]> # 4.19
Reviewed-by: Jon Hunter <[email protected]>
Signed-off-by: Sowjanya Komatineni <[email protected]>
---
.../bindings/mmc/nvidia,tegra20-sdhci.txt | 23 ++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 9bce578..a5f1fae 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -14,8 +14,15 @@ Required properties:
- "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
- "nvidia,tegra210-sdhci": for Tegra210
- "nvidia,tegra186-sdhci": for Tegra186
-- clocks : Must contain one entry, for the module clock.
- See ../clocks/clock-bindings.txt for details.
+- clocks: For Tegra210 and Tegra186 must contain two entries.
+ One for the module clock and one for the timeout clock.
+ For all other Tegra devices, must contain a single entry for
+ the module clock. See ../clocks/clock-bindings.txt for details.
+- clock-names: For Tegra210 and Tegra186 must contain the strings 'sdhci'
+ and 'tmclk' to represent the module and the timeout clocks,
+ respectively.
+ For all other Tegra devices must contain the string 'sdhci'
+ to represent the module clock.
- resets : Must contain an entry for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names : Must include the following entries:
@@ -38,3 +45,15 @@ sdhci@c8000200 {
power-gpios = <&gpio 155 0>; /* gpio PT3 */
bus-width = <8>;
};
+
+sdhci@700b0000 {
+ compatible = "nvidia,tegra210-sdhci";
+ reg = <0x0 0x700b0000 0x0 0x200>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+ <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+ clock-names = "sdhci", "tmclk";
+ resets = <&tegra_car 14>;
+ reset-names = "sdhci";
+ status = "disabled";
+};
--
2.7.4