Hi All,
The following is a v7 version of the series [1-6] that adds an IRQChip
driver for the local interrupt controller present within a Programmable
Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS) present on a
number of TI SoCs including OMAP architecture based AM335x, AM437x, AM57xx SoCs,
Keystone 2 architecture based 66AK2G SoCs, Davinci architecture based
OMAP-L138/DA850 SoCs and the latest K3 architecture based AM65x and J721E SoCs.
Please see the v1 cover-letter [1] for details about the features of this
interrupt controller. More details can be found in any of the supported SoC
TRMs. Eg: Chapter 30.1.6 of AM5728 TRM [7]
Please see the individual patches for exact changes in each patch, following are
the main changes from v5:
- Add Co-developed-by tags.
- Change the irq type to IRQ_TYPE_LEVEL_HIGH in patch #2.
[1] https://patchwork.kernel.org/cover/11034561/
[2] https://patchwork.kernel.org/cover/11069749/
[3] https://patchwork.kernel.org/cover/11639055/
[4] https://patchwork.kernel.org/cover/11688727/
[5] https://patchwork.kernel.org/cover/11746463/
[6] https://patchwork.kernel.org/cover/11776181/
[7] http://www.ti.com/lit/pdf/spruhz6
Best regards
Grzegorz
David Lechner (1):
irqchip/irq-pruss-intc: Implement irq_{get,set}_irqchip_state ops
Grzegorz Jaszczyk (1):
irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS
interrupts
Suman Anna (3):
dt-bindings: irqchip: Add PRU-ICSS interrupt controller bindings
irqchip/irq-pruss-intc: Add logic for handling reserved interrupts
irqchip/irq-pruss-intc: Add support for ICSSG INTC on K3 SoCs
.../interrupt-controller/ti,pruss-intc.yaml | 158 +++++
drivers/irqchip/Kconfig | 10 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-pruss-intc.c | 664 +++++++++++++++++++++
4 files changed, 833 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/ti,pruss-intc.yaml
create mode 100644 drivers/irqchip/irq-pruss-intc.c
--
2.7.4
On 2020-09-16 17:35, Grzegorz Jaszczyk wrote:
> Hi All,
>
> The following is a v7 version of the series [1-6] that adds an IRQChip
> driver for the local interrupt controller present within a Programmable
> Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
> present on a
> number of TI SoCs including OMAP architecture based AM335x, AM437x,
> AM57xx SoCs,
> Keystone 2 architecture based 66AK2G SoCs, Davinci architecture based
> OMAP-L138/DA850 SoCs and the latest K3 architecture based AM65x and
> J721E SoCs.
> Please see the v1 cover-letter [1] for details about the features of
> this
> interrupt controller. More details can be found in any of the
> supported SoC
> TRMs. Eg: Chapter 30.1.6 of AM5728 TRM [7]
>
> Please see the individual patches for exact changes in each patch,
> following are
> the main changes from v5:
> - Add Co-developed-by tags.
> - Change the irq type to IRQ_TYPE_LEVEL_HIGH in patch #2.
Applied to irq/irqchip-next.
M.
--
Jazz is not dead. It just smells funny...
On Thu, 17 Sep 2020 at 12:45, Marc Zyngier <[email protected]> wrote:
>
> On 2020-09-16 17:35, Grzegorz Jaszczyk wrote:
> > Hi All,
> >
> > The following is a v7 version of the series [1-6] that adds an IRQChip
> > driver for the local interrupt controller present within a Programmable
> > Real-Time Unit and Industrial Communication Subsystem (PRU-ICSS)
> > present on a
> > number of TI SoCs including OMAP architecture based AM335x, AM437x,
> > AM57xx SoCs,
> > Keystone 2 architecture based 66AK2G SoCs, Davinci architecture based
> > OMAP-L138/DA850 SoCs and the latest K3 architecture based AM65x and
> > J721E SoCs.
> > Please see the v1 cover-letter [1] for details about the features of
> > this
> > interrupt controller. More details can be found in any of the
> > supported SoC
> > TRMs. Eg: Chapter 30.1.6 of AM5728 TRM [7]
> >
> > Please see the individual patches for exact changes in each patch,
> > following are
> > the main changes from v5:
> > - Add Co-developed-by tags.
> > - Change the irq type to IRQ_TYPE_LEVEL_HIGH in patch #2.
>
> Applied to irq/irqchip-next.
>
Thank you!
Grzegorz