Added support for HK10-C1 and HK10-C2 board variants based on IPQ8074 SoC.
Both these variants support dual QCN9000 PCIe cards that uses MHI communication
protocol over PCIe. In addition, HK10-C1 support on-chip radio.
Both these variants slightly differ in clock configuation for ethernet.
This series depends on below series:
[V2,0/7] Add PCIe support for IPQ8074
[v7,0/9] remoteproc: qcom: q6v5-wcss: Add support for secure pil
changes since v2:
- In patch 3, Moved pcie0_rp and pcie1_rp nodes and
removed unused members and subnodes
Gokul Sriram Palanisamy (3):
dt-bindings: qcom: Add ipq8074 bindings
arm64: dts: Add board support for HK10
arm64: dts: Enabled MHI device over PCIe
Documentation/devicetree/bindings/arm/qcom.yaml | 4 +
arch/arm64/boot/dts/qcom/Makefile | 2 +
arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 11 +++
arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 14 +++
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 123 ++++++++++++++++++++++++
5 files changed, 154 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
--
2.7.4
Enabled MHI device support over PCIe and added memory
reservation required for MHI enabled QCN9000 PCIe card.
Signed-off-by: Gokul Sriram Palanisamy <[email protected]>
---
arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 47 ++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
index 0827055..e5c1ec0 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
@@ -24,6 +24,22 @@
device_type = "memory";
reg = <0x0 0x40000000 0x0 0x20000000>;
};
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ qcn9000_pcie0: memory@50f00000 {
+ no-map;
+ reg = <0x0 0x50f00000 0x0 0x03700000>;
+ };
+
+ qcn9000_pcie1: memory@54600000 {
+ no-map;
+ reg = <0x0 0x54600000 0x0 0x03700000>;
+ };
+ };
};
&blsp1_spi1 {
@@ -45,11 +61,42 @@
&pcie0 {
status = "ok";
perst-gpio = <&tlmm 58 0x1>;
+
+ pcie0_rp: pcie0_rp {
+ reg = <0 0 0 0 0>;
+
+ status = "ok";
+ mhi_0: qcom,mhi@0 {
+ reg = <0 0 0 0 0 >;
+
+ qrtr_instance_id = <0x20>;
+ base-addr = <0x50f00000>;
+ m3-dump-addr = <0x53c00000>;
+ etr-addr = <0x53d00000>;
+ qcom,caldb-addr = <0x53e00000>;
+ };
+ };
};
&pcie1 {
status = "ok";
perst-gpio = <&tlmm 61 0x1>;
+
+ pcie1_rp: pcie1_rp {
+ reg = <0 0 0 0 0>;
+
+ status = "ok";
+ mhi_1: qcom,mhi@1 {
+ reg = <0 0 0 0 0 >;
+
+ qrtr_instance_id = <0x21>;
+ base-addr = <0x54600000>;
+ m3-dump-addr = <0x57300000>;
+ etr-addr = <0x57400000>;
+ qcom,caldb-addr = <0x57500000>;
+ };
+ };
+ };
};
&qmp_pcie_phy0 {
--
2.7.4
Hi Gokul,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.9-rc8]
[cannot apply to next-20201008]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Gokul-Sriram-Palanisamy/Add-board-support-for-HK10-board-variants/20201008-203356
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r006-20201008 (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/d852c07655e85bfc07d8d3543698ce06e2ce62f8
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Gokul-Sriram-Palanisamy/Add-board-support-for-HK10-board-variants/20201008-203356
git checkout d852c07655e85bfc07d8d3543698ce06e2ce62f8
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi:100.1-2 syntax error
FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]
Hi Gokul,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.9-rc8]
[cannot apply to next-20201008]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]
url: https://github.com/0day-ci/linux/commits/Gokul-Sriram-Palanisamy/Add-board-support-for-HK10-board-variants/20201008-203356
base: https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-randconfig-r015-20201008 (attached as .config)
compiler: clang version 12.0.0 (https://github.com/llvm/llvm-project 8da0df3d6dcc0dd42740be60b0da4ec201190904)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# install arm64 cross compiling tool for clang build
# apt-get install binutils-aarch64-linux-gnu
# https://github.com/0day-ci/linux/commit/d852c07655e85bfc07d8d3543698ce06e2ce62f8
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Gokul-Sriram-Palanisamy/Add-board-support-for-HK10-board-variants/20201008-203356
git checkout d852c07655e85bfc07d8d3543698ce06e2ce62f8
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <[email protected]>
All errors (new ones prefixed by >>):
>> Error: arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi:100.1-2 syntax error
>> FATAL ERROR: Unable to parse input tree
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]