2021-01-12 19:06:02

by Sowjanya Komatineni

[permalink] [raw]
Subject: [PATCH v3] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO

VI I2C controller has known hardware bug where immediate multiple
writes to TX_FIFO register gets stuck.

Recommended software work around is to read I2C register after
each write to TX_FIFO register to flush out the data.

This patch implements this work around for VI I2C controller.

Signed-off-by: Sowjanya Komatineni <[email protected]>
---
drivers/i2c/busses/i2c-tegra.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 6f08c0c..4a27782 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -326,6 +326,8 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
/* read back register to make sure that register writes completed */
if (reg != I2C_TX_FIFO)
readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+ else if (i2c_dev->is_vi)
+ readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
}

static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
@@ -339,6 +341,21 @@ static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
}

+static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data,
+ unsigned int reg, unsigned int len)
+{
+ u32 *data32 = data;
+
+ /*
+ * VI I2C controller has known hardware bug where writes get stuck
+ * when immediate multiple writes happen to TX_FIFO register.
+ * Recommended software work around is to read I2C register after
+ * each write to TX_FIFO register to flush out the data.
+ */
+ while (len--)
+ i2c_writel(i2c_dev, *data32++, reg);
+}
+
static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
unsigned int reg, unsigned int len)
{
@@ -811,7 +828,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
i2c_dev->msg_buf_remaining = buf_remaining;
i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;

- i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+ if (i2c_dev->is_vi)
+ i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+ else
+ i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);

buf += words_to_transfer * BYTES_PER_FIFO_WORD;
}
--
2.7.4


2021-01-12 19:20:46

by Dmitry Osipenko

[permalink] [raw]
Subject: Re: [PATCH v3] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO

12.01.2021 22:02, Sowjanya Komatineni пишет:
> VI I2C controller has known hardware bug where immediate multiple
> writes to TX_FIFO register gets stuck.
>
> Recommended software work around is to read I2C register after
> each write to TX_FIFO register to flush out the data.
>
> This patch implements this work around for VI I2C controller.

You could have kept Thierry's ack since it was given to the fix in
general. No need to make v4.

> Signed-off-by: Sowjanya Komatineni <[email protected]>
> ---
> drivers/i2c/busses/i2c-tegra.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> index 6f08c0c..4a27782 100644
> --- a/drivers/i2c/busses/i2c-tegra.c
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -326,6 +326,8 @@ static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
> /* read back register to make sure that register writes completed */
> if (reg != I2C_TX_FIFO)
> readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
> + else if (i2c_dev->is_vi)
> + readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
> }
>
> static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
> @@ -339,6 +341,21 @@ static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
> writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
> }
>
> +static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data,
> + unsigned int reg, unsigned int len)
> +{
> + u32 *data32 = data;
> +
> + /*
> + * VI I2C controller has known hardware bug where writes get stuck
> + * when immediate multiple writes happen to TX_FIFO register.
> + * Recommended software work around is to read I2C register after
> + * each write to TX_FIFO register to flush out the data.
> + */
> + while (len--)
> + i2c_writel(i2c_dev, *data32++, reg);
> +}
> +
> static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
> unsigned int reg, unsigned int len)
> {
> @@ -811,7 +828,10 @@ static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
> i2c_dev->msg_buf_remaining = buf_remaining;
> i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
>
> - i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
> + if (i2c_dev->is_vi)
> + i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
> + else
> + i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
>
> buf += words_to_transfer * BYTES_PER_FIFO_WORD;
> }
>

Reviewed-by: Dmitry Osipenko <[email protected]>

2021-01-15 15:59:58

by Thierry Reding

[permalink] [raw]
Subject: Re: [PATCH v3] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO

On Tue, Jan 12, 2021 at 11:02:41AM -0800, Sowjanya Komatineni wrote:
> VI I2C controller has known hardware bug where immediate multiple
> writes to TX_FIFO register gets stuck.
>
> Recommended software work around is to read I2C register after
> each write to TX_FIFO register to flush out the data.
>
> This patch implements this work around for VI I2C controller.
>
> Signed-off-by: Sowjanya Komatineni <[email protected]>
> ---
> drivers/i2c/busses/i2c-tegra.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)

Acked-by: Thierry Reding <[email protected]>


Attachments:
(No filename) (615.00 B)
signature.asc (849.00 B)
Download all attachments

2021-01-17 11:26:56

by Wolfram Sang

[permalink] [raw]
Subject: Re: [PATCH v3] i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO

On Tue, Jan 12, 2021 at 11:02:41AM -0800, Sowjanya Komatineni wrote:
> VI I2C controller has known hardware bug where immediate multiple
> writes to TX_FIFO register gets stuck.
>
> Recommended software work around is to read I2C register after
> each write to TX_FIFO register to flush out the data.
>
> This patch implements this work around for VI I2C controller.
>
> Signed-off-by: Sowjanya Komatineni <[email protected]>

Applied to for-current, thanks!


Attachments:
(No filename) (481.00 B)
signature.asc (849.00 B)
Download all attachments