This change will add helper qcom_nandc_is_last_cw()
which will check for last code word and return true for
last code word and false for other code word.
Signed-off-by: Md Sadre Alam <[email protected]>
---
drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++++---------
1 file changed, 15 insertions(+), 9 deletions(-)
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index ae8870ec..4189a7f 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -661,6 +661,12 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
*reg = cpu_to_le32(val);
}
+/* Helper to check the code word, whether it is last cw or not */
+static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
+{
+ return cw == (ecc->steps - 1);
+}
+
/* helper to configure address register values */
static void set_address(struct qcom_nand_host *host, u16 column, int page)
{
@@ -1632,7 +1638,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
- if (cw == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, cw)) {
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) * 4);
oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
@@ -1713,7 +1719,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
}
for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
- if (cw == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, cw)) {
data_size = ecc->size - ((ecc->steps - 1) * 4);
oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
} else {
@@ -1773,7 +1779,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
u32 flash, buffer, erased_cw;
int data_len, oob_len;
- if (i == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, i)) {
data_len = ecc->size - ((ecc->steps - 1) << 2);
oob_len = ecc->steps << 2;
} else {
@@ -1872,7 +1878,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
- if (i == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, i)) {
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
@@ -2051,7 +2057,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
- if (i == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, i)) {
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
@@ -2068,10 +2074,10 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
* when ECC is enabled, we don't really need to write anything
* to oob for the first n - 1 codewords since these oob regions
* just contain ECC bytes that's written by the controller
- * itself. For the last codeword, we skip the bbm positions and
- * write to the free oob area.
+ * itself. For the last codeword, we skip the bbm positions and write
+ * to the free oob area.
*/
- if (i == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, i)) {
oob_buf += host->bbm_size;
write_data_dma(nandc, FLASH_BUF_ACC + data_size,
@@ -2126,7 +2132,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
- if (i == (ecc->steps - 1)) {
+ if (qcom_nandc_is_last_cw(ecc, i)) {
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) << 2);
oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
--
2.7.4
Hello,
Md Sadre Alam <[email protected]> wrote on Mon, 22 Feb 2021
11:54:55 +0530:
> This change will add helper qcom_nandc_is_last_cw()
Use the imperative form, something like:
"
Add the qcom_nandc_is_last_cw() helper which checks if the input cw
index is the last one or not.
"
> which will check for last code word and return true for
> last code word and false for other code word.
>
> Signed-off-by: Md Sadre Alam <[email protected]>
> ---
> drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++++---------
> 1 file changed, 15 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index ae8870ec..4189a7f 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -661,6 +661,12 @@ static void nandc_set_reg(struct qcom_nand_controller *nandc, int offset,
> *reg = cpu_to_le32(val);
> }
>
> +/* Helper to check the code word, whether it is last cw or not */
> +static bool qcom_nandc_is_last_cw(struct nand_ecc_ctrl *ecc, int cw)
> +{
> + return cw == (ecc->steps - 1);
> +}
> +
> /* helper to configure address register values */
> static void set_address(struct qcom_nand_host *host, u16 column, int page)
> {
> @@ -1632,7 +1638,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
> data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
> oob_size1 = host->bbm_size;
>
> - if (cw == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, cw)) {
> data_size2 = ecc->size - data_size1 -
> ((ecc->steps - 1) * 4);
> oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
> @@ -1713,7 +1719,7 @@ check_for_erased_page(struct qcom_nand_host *host, u8 *data_buf,
> }
>
> for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
> - if (cw == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, cw)) {
> data_size = ecc->size - ((ecc->steps - 1) * 4);
> oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
> } else {
> @@ -1773,7 +1779,7 @@ static int parse_read_errors(struct qcom_nand_host *host, u8 *data_buf,
> u32 flash, buffer, erased_cw;
> int data_len, oob_len;
>
> - if (i == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, i)) {
> data_len = ecc->size - ((ecc->steps - 1) << 2);
> oob_len = ecc->steps << 2;
> } else {
> @@ -1872,7 +1878,7 @@ static int read_page_ecc(struct qcom_nand_host *host, u8 *data_buf,
> for (i = 0; i < ecc->steps; i++) {
> int data_size, oob_size;
>
> - if (i == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, i)) {
> data_size = ecc->size - ((ecc->steps - 1) << 2);
> oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
> host->spare_bytes;
> @@ -2051,7 +2057,7 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
> for (i = 0; i < ecc->steps; i++) {
> int data_size, oob_size;
>
> - if (i == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, i)) {
> data_size = ecc->size - ((ecc->steps - 1) << 2);
> oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
> host->spare_bytes;
> @@ -2068,10 +2074,10 @@ static int qcom_nandc_write_page(struct nand_chip *chip, const uint8_t *buf,
> * when ECC is enabled, we don't really need to write anything
> * to oob for the first n - 1 codewords since these oob regions
> * just contain ECC bytes that's written by the controller
> - * itself. For the last codeword, we skip the bbm positions and
> - * write to the free oob area.
> + * itself. For the last codeword, we skip the bbm positions and write
> + * to the free oob area.
Not related change, please drop.
> */
> - if (i == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, i)) {
> oob_buf += host->bbm_size;
>
> write_data_dma(nandc, FLASH_BUF_ACC + data_size,
> @@ -2126,7 +2132,7 @@ static int qcom_nandc_write_page_raw(struct nand_chip *chip,
> data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
> oob_size1 = host->bbm_size;
>
> - if (i == (ecc->steps - 1)) {
> + if (qcom_nandc_is_last_cw(ecc, i)) {
> data_size2 = ecc->size - data_size1 -
> ((ecc->steps - 1) << 2);
> oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
Thanks,
Miquèl