Several error is reported by checkpatch.pl, here are two patches to clean
them up.
Luo Jiaxing (2):
scsi: pm8001: clean up for white space
scsi: pm8001: clean up for open brace
drivers/scsi/pm8001/pm8001_ctl.c | 8 +++-----
drivers/scsi/pm8001/pm8001_hwi.c | 14 +++++++-------
drivers/scsi/pm8001/pm8001_sas.c | 20 ++++++++++----------
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 14 +++++++-------
5 files changed, 28 insertions(+), 30 deletions(-)
--
2.7.4
Many error are found like below when run checkpatch.pl
ERROR: space prohibited before that ',' (ctx:WxW)
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);
It all about white space, so fix them.
Signed-off-by: Jianqin Xie <[email protected]>
Signed-off-by: Luo Jiaxing <[email protected]>
---
drivers/scsi/pm8001/pm8001_ctl.c | 2 +-
drivers/scsi/pm8001/pm8001_hwi.c | 14 +++++++-------
drivers/scsi/pm8001/pm8001_sas.c | 20 ++++++++++----------
drivers/scsi/pm8001/pm8001_sas.h | 2 +-
drivers/scsi/pm8001/pm80xx_hwi.c | 14 +++++++-------
5 files changed, 26 insertions(+), 26 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
index 12035ba..ffb4387 100644
--- a/drivers/scsi/pm8001/pm8001_ctl.c
+++ b/drivers/scsi/pm8001/pm8001_ctl.c
@@ -371,7 +371,7 @@ static ssize_t pm8001_ctl_aap_log_show(struct device *cdev,
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
int i;
#define AAP1_MEMMAP(r, c) \
- (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
+ (*(u32 *)((u8 *)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
+ (c)))
char *str = buf;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 49bf2f7..6887fa3 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1826,7 +1826,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
* that the task has been finished.
*/
static void
-mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct pm8001_ccb_info *ccb;
@@ -2058,7 +2058,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
}
/*See the comments for mpi_ssp_completion */
-static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
unsigned long flags;
@@ -2294,9 +2294,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
(status != IO_UNDERFLOW)) {
if (!((t->dev->parent) &&
(dev_is_expander(t->dev->parent->dev_type)))) {
- for (i = 0 , j = 4; j <= 7 && i <= 3; i++ , j++)
+ for (i = 0, j = 4; j <= 7 && i <= 3; i++, j++)
sata_addr_low[i] = pm8001_ha->sas_addr[j];
- for (i = 0 , j = 0; j <= 3 && i <= 3; i++ , j++)
+ for (i = 0, j = 0; j <= 3 && i <= 3; i++, j++)
sata_addr_hi[i] = pm8001_ha->sas_addr[j];
memcpy(&temp_sata_addr_low, sata_addr_low,
sizeof(sata_addr_low));
@@ -2625,7 +2625,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/*See the comments for mpi_ssp_completion */
-static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct task_status_struct *ts;
@@ -3602,7 +3602,7 @@ int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
return 0;
}
-int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
u32 status;
int i;
@@ -3685,7 +3685,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
-static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
unsigned long flags;
struct hw_event_resp *pPayload =
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index a98d449..43b77ac 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -877,8 +877,8 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
pm8001_dev->device_id, pm8001_dev->dev_type);
if (atomic_read(&pm8001_dev->running_req)) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
- pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
- dev, 1, 0);
+ pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ dev, 1, 0);
while (atomic_read(&pm8001_dev->running_req))
msleep(20);
spin_lock_irqsave(&pm8001_ha->lock, flags);
@@ -1013,8 +1013,8 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
goto out;
}
msleep(2000);
- rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
- dev, 1, 0);
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ dev, 1, 0);
if (rc) {
pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n"
"with rc %d\n", pm8001_dev->device_id, rc);
@@ -1059,8 +1059,8 @@ int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
goto out;
}
/* send internal ssp/sata/smp abort command to FW */
- rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
- dev, 1, 0);
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ dev, 1, 0);
msleep(100);
/* deregister the target device */
@@ -1075,8 +1075,8 @@ int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
wait_for_completion(&completion_setstate);
} else {
/* send internal ssp/sata/smp abort command to FW */
- rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
- dev, 1, 0);
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ dev, 1, 0);
msleep(100);
/* deregister the target device */
@@ -1104,8 +1104,8 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
DECLARE_COMPLETION_ONSTACK(completion_setstate);
if (dev_is_sata(dev)) {
struct sas_phy *phy = sas_get_local_phy(dev);
- rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
- dev, 1, 0);
+ rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+ dev, 1, 0);
rc = sas_phy_reset(phy, 1);
sas_put_local_phy(phy);
pm8001_dev->setds_completion = &completion_setstate;
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 039ed91..e7f693a 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -705,7 +705,7 @@ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
void *piomb);
-int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb);
+int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha, void *piomb);
int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb);
struct sas_task *pm8001_alloc_task(void);
void pm8001_task_done(struct sas_task *task);
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 8431556..5e02446 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -90,7 +90,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
void __iomem *fatal_table_address = pm8001_ha->fatal_tbl_addr;
- u32 accum_len , reg_val, index, *temp;
+ u32 accum_len, reg_val, index, *temp;
u32 status = 1;
unsigned long start;
u8 *direct_data;
@@ -1904,7 +1904,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
* that the task has been finished.
*/
static void
-mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct pm8001_ccb_info *ccb;
@@ -2194,7 +2194,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
}
/*See the comments for mpi_ssp_completion */
-static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
unsigned long flags;
@@ -2444,9 +2444,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
(status != IO_UNDERFLOW)) {
if (!((t->dev->parent) &&
(dev_is_expander(t->dev->parent->dev_type)))) {
- for (i = 0 , j = 4; i <= 3 && j <= 7; i++ , j++)
+ for (i = 0, j = 4; i <= 3 && j <= 7; i++, j++)
sata_addr_low[i] = pm8001_ha->sas_addr[j];
- for (i = 0 , j = 0; i <= 3 && j <= 3; i++ , j++)
+ for (i = 0, j = 0; i <= 3 && j <= 3; i++, j++)
sata_addr_hi[i] = pm8001_ha->sas_addr[j];
memcpy(&temp_sata_addr_low, sata_addr_low,
sizeof(sata_addr_low));
@@ -2788,7 +2788,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/*See the comments for mpi_ssp_completion */
-static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
{
struct sas_task *t;
struct task_status_struct *ts;
@@ -4918,7 +4918,7 @@ static void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
u32 operation, u32 phyid,
u32 length, u32 *buf)
{
- u32 tag , i, j = 0;
+ u32 tag, i, j = 0;
int rc;
struct set_phy_profile_req payload;
struct inbound_queue_table *circularQ;
--
2.7.4
On 4/2/21 2:08 AM, Luo Jiaxing wrote:
> #define AAP1_MEMMAP(r, c) \
> - (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
> + (*(u32 *)((u8 *)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
> + (c)))
Since this macro is being modified, please convert it into an inline
function such that the type of the arguments can be verified by the
compiler.
Thanks,
Bart.
On 2021/4/3 0:01, Bart Van Assche wrote:
> On 4/2/21 2:08 AM, Luo Jiaxing wrote:
>> #define AAP1_MEMMAP(r, c) \
>> - (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
>> + (*(u32 *)((u8 *)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
>> + (c)))
> Since this macro is being modified, please convert it into an inline
> function such that the type of the arguments can be verified by the
> compiler.
Sure, but still keep the function name as AAP1_MEMMAP?
Thanks
Jiaxing
>
> Thanks,
>
> Bart.
>
> .
>
On 4/5/21 11:39 PM, luojiaxing wrote:
>
> On 2021/4/3 0:01, Bart Van Assche wrote:
>> On 4/2/21 2:08 AM, Luo Jiaxing wrote:
>>> #define AAP1_MEMMAP(r, c) \
>>> - (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r)
>>> * 32 \
>>> + (*(u32 *)((u8 *)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r)
>>> * 32 \
>>> + (c)))
>> Since this macro is being modified, please convert it into an inline
>> function such that the type of the arguments can be verified by the
>> compiler.
>
> Sure, but still keep the function name as AAP1_MEMMAP?
The coding style requires lower case names for functions so the function
name probably should be converted to lower case.
Thanks,
Bart.
On 2021/4/8 5:56, Bart Van Assche wrote:
> On 4/5/21 11:39 PM, luojiaxing wrote:
>>
>> On 2021/4/3 0:01, Bart Van Assche wrote:
>>> On 4/2/21 2:08 AM, Luo Jiaxing wrote:
>>>> #define AAP1_MEMMAP(r, c) \
>>>> - (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr +
>>>> (r) * 32 \
>>>> + (*(u32 *)((u8 *)pm8001_ha->memoryMap.region[AAP1].virt_ptr +
>>>> (r) * 32 \
>>>> + (c)))
>>> Since this macro is being modified, please convert it into an inline
>>> function such that the type of the arguments can be verified by the
>>> compiler.
>>
>> Sure, but still keep the function name as AAP1_MEMMAP?
>
> The coding style requires lower case names for functions so the
> function name probably should be converted to lower case.
Sure, and sorry to post v2 before you reply, you can ignore it and
directly check v3.
Thanks
Jiaxing
>
> Thanks,
>
> Bart.
>
> .
>