Set clock phandle to uart node for Milbeaut M10V support.
Signed-off-by: Sugaya Taichi <[email protected]>
---
arch/arm/boot/dts/milbeaut-m10v.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/milbeaut-m10v.dtsi
index c800b13..e592fe0 100644
--- a/arch/arm/boot/dts/milbeaut-m10v.dtsi
+++ b/arch/arm/boot/dts/milbeaut-m10v.dtsi
@@ -85,6 +85,7 @@
reg = <0x1e700010 0x10>;
interrupts = <0 141 0x4>, <0 149 0x4>;
interrupt-names = "rx", "tx";
+ clock = <&clk 2>;
};
};
--
2.7.4