Hello,
This series adds and enables devicetree nodes for QPIC BAM
and QPIC NAND for Qualcomm SDX65 platform.
Changes since v2:
- Modify status as "okay" for the nodes added for sdx65-mtp.
Changes since v1:
- Sort the nodes added for sdx65-mtp in alphabetical order.
- Rebased on top of 5.18-rc5.
Kaushal Kumar (4):
ARM: dts: qcom: sdx65: Add QPIC BAM support
ARM: dts: qcom: sdx65: Add QPIC NAND support
ARM: dts: qcom: sdx65-mtp: Enable QPIC BAM support
ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 27 +++++++++++++++++++++++----
arch/arm/boot/dts/qcom-sdx65.dtsi | 34 ++++++++++++++++++++++++++++++++++
2 files changed, 57 insertions(+), 4 deletions(-)
--
2.7.4
Add devicetree node to enable support for QPIC
BAM DMA controller on Qualcomm SDX65 platform.
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Kaushal Kumar <[email protected]>
---
arch/arm/boot/dts/qcom-sdx65.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom-sdx65.dtsi
index a64be20..d6a6087 100644
--- a/arch/arm/boot/dts/qcom-sdx65.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx65.dtsi
@@ -199,6 +199,18 @@
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ qpic_bam: dma-controller@1b04000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x01b04000 0x1c000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rpmhcc RPMH_QPIC_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ qcom,controlled-remotely;
+ status = "disabled";
+ };
+
tcsr_mutex: hwlock@1f40000 {
compatible = "qcom,tcsr-mutex";
reg = <0x01f40000 0x40000>;
--
2.7.4
Enable QPIC NAND devicetree node for Qualcomm SDX65-MTP board.
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Signed-off-by: Kaushal Kumar <[email protected]>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index e9c8df9..e747ec0 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -249,6 +249,21 @@
status = "okay";
};
+&qpic_nand {
+ status = "okay";
+
+ nand@0 {
+ reg = <0>;
+
+ nand-ecc-strength = <4>;
+ nand-ecc-step-size = <512>;
+ nand-bus-width = <8>;
+ /* ico and efs2 partitions are secured */
+ secure-regions = /bits/ 64 <0x500000 0x500000
+ 0xa00000 0xb00000>;
+ };
+};
+
&usb {
status = "okay";
};
--
2.7.4
On Mon, 2 May 2022 10:08:02 -0700, Kaushal Kumar wrote:
> This series adds and enables devicetree nodes for QPIC BAM
> and QPIC NAND for Qualcomm SDX65 platform.
>
> Changes since v2:
> - Modify status as "okay" for the nodes added for sdx65-mtp.
>
> Changes since v1:
> - Sort the nodes added for sdx65-mtp in alphabetical order.
> - Rebased on top of 5.18-rc5.
>
> [...]
Applied, thanks!
[1/4] ARM: dts: qcom: sdx65: Add QPIC BAM support
commit: ab11b74d87ddadb1e6e6d8dc36f3145a26158ef2
[2/4] ARM: dts: qcom: sdx65: Add QPIC NAND support
commit: 0ec15b6f7621c2e5ded3d3d1a67361da1895c26b
[3/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC BAM support
commit: eae61fddd64861fc496a7786b02449abe8188145
[4/4] ARM: dts: qcom: sdx65-mtp: Enable QPIC NAND support
commit: 59e73f67e14b95eddbbff2f009c98a55cef47f8a
Best regards,
--
Bjorn Andersson <[email protected]>