2022-05-09 06:47:08

by John Garry

[permalink] [raw]
Subject: [PATCH] scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HW

From: Xiang Chen <[email protected]>

If we fail to notify the phy up event then undo the RPM resume, as the
phy up notify event handling pairs with that RPM resume.

Tested-by: Yihang Li <[email protected]>
Reported-by: Yihang Li <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
---
Please consider for 5.19, thanks!

diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 79f87d7c3e68..7d819fc0395e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1563,9 +1563,15 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)

phy->port_id = port_id;

- /* Call pm_runtime_put_sync() with pairs in hisi_sas_phyup_pm_work() */
+ /*
+ * Call pm_runtime_get_noresume() which pairs with
+ * hisi_sas_phyup_pm_work() -> pm_runtime_put_sync().
+ * For failure call pm_runtime_put() as we are in a hardirq context.
+ */
pm_runtime_get_noresume(dev);
- hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP_PM);
+ res = hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP_PM);
+ if (!res)
+ pm_runtime_put(dev);

res = IRQ_HANDLED;

--
2.26.2



2022-05-11 05:29:15

by Martin K. Petersen

[permalink] [raw]
Subject: Re: [PATCH] scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HW


John,

> If we fail to notify the phy up event then undo the RPM resume, as the
> phy up notify event handling pairs with that RPM resume.

Applied to 5.19/scsi-staging, thanks!

--
Martin K. Petersen Oracle Linux Engineering

2022-05-17 08:56:06

by Martin K. Petersen

[permalink] [raw]
Subject: Re: [PATCH] scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HW

On Fri, 6 May 2022 20:25:39 +0800, John Garry wrote:

> From: Xiang Chen <[email protected]>
>
> If we fail to notify the phy up event then undo the RPM resume, as the
> phy up notify event handling pairs with that RPM resume.
>
>

Applied to 5.19/scsi-queue, thanks!

[1/1] scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HW
https://git.kernel.org/mkp/scsi/c/9b5387fe5af3

--
Martin K. Petersen Oracle Linux Engineering