From: Xiang Chen <[email protected]>
If we fail to notify the phy up event then undo the RPM resume, as the
phy up notify event handling pairs with that RPM resume.
Tested-by: Yihang Li <[email protected]>
Reported-by: Yihang Li <[email protected]>
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: John Garry <[email protected]>
---
Please consider for 5.19, thanks!
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 79f87d7c3e68..7d819fc0395e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1563,9 +1563,15 @@ static irqreturn_t phy_up_v3_hw(int phy_no, struct hisi_hba *hisi_hba)
phy->port_id = port_id;
- /* Call pm_runtime_put_sync() with pairs in hisi_sas_phyup_pm_work() */
+ /*
+ * Call pm_runtime_get_noresume() which pairs with
+ * hisi_sas_phyup_pm_work() -> pm_runtime_put_sync().
+ * For failure call pm_runtime_put() as we are in a hardirq context.
+ */
pm_runtime_get_noresume(dev);
- hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP_PM);
+ res = hisi_sas_notify_phy_event(phy, HISI_PHYE_PHY_UP_PM);
+ if (!res)
+ pm_runtime_put(dev);
res = IRQ_HANDLED;
--
2.26.2
John,
> If we fail to notify the phy up event then undo the RPM resume, as the
> phy up notify event handling pairs with that RPM resume.
Applied to 5.19/scsi-staging, thanks!
--
Martin K. Petersen Oracle Linux Engineering
On Fri, 6 May 2022 20:25:39 +0800, John Garry wrote:
> From: Xiang Chen <[email protected]>
>
> If we fail to notify the phy up event then undo the RPM resume, as the
> phy up notify event handling pairs with that RPM resume.
>
>
Applied to 5.19/scsi-queue, thanks!
[1/1] scsi: hisi_sas: Undo RPM resume for failed notify phy event for v3 HW
https://git.kernel.org/mkp/scsi/c/9b5387fe5af3
--
Martin K. Petersen Oracle Linux Engineering