From: ChiYuan Huang <[email protected]>
The RT6190 is a 4-switch Buck-Boost controller designed for USB power delivery
(USB PD). It operates with wide input voltage range from 4.5V to 36V, and the
output voltage can be programmable between 3V and 36V. It implements peak
current mode control mechanism to deliver up to 100W power with the
programmable constant voltage and constant current output. It also has built-in
charge pumps for driving external low-cost N-MOSFETs to control the power path.
ChiYuan Huang (2):
dt-bindings: regulator: Add bindings for Richtek RT6190 regulator
regulator: rt6190: Add support for Richtek RT6190 regulator
.../regulator/richtek,rt6190-regulator.yaml | 77 ++++
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rt6190-regulator.c | 495 +++++++++++++++++++++
4 files changed, 584 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
create mode 100644 drivers/regulator/rt6190-regulator.c
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add devicetree binding for Richtek RT6190 4-Switch buckboost controller.
Signed-off-by: ChiYuan Huang <[email protected]>
---
.../regulator/richtek,rt6190-regulator.yaml | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
new file mode 100644
index 00000000..be0fa7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt6190-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT6190 4-Switch BuckBoost controller
+
+maintainers:
+ - ChiYuan Huang <[email protected]>
+
+description: |
+ The RT6190 is 4-Switch BuckBoost controller designed for converting input
+ voltage to output voltage that can be equal to, higher or lower than input
+ voltage. It operates with wide input voltage range from 4.5V to 36V, and
+ the output voltage can be set from 3V to 36V by external FB pin. It's commonly
+ used for the application like as BuckBoost bus upply, docking station and USB
+ power delivery product.
+
+ Datasheet is available at
+ https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
+
+allOf:
+ - $ref: regulator.yaml#
+
+properties:
+ compatible:
+ enum:
+ - richtek,rt6190
+
+ reg:
+ maxItems: 1
+
+ enable-gpios: true
+
+ wakeup-source: true
+
+ interrupts:
+ maxItems: 1
+
+ regulator-allowed-modes:
+ description: |
+ buck allowed operating mode
+ 0: PSM mode (light load Power Saving Mode)
+ 1: FCCM mode (Forced-CCM mode)
+ items:
+ enum: [0, 1]
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ regulator@2c {
+ compatible = "richtek,rt6190";
+ reg = <0x2c>;
+ wakeup-source;
+ interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>;
+ enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "richtek,rt6190-buckboost";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <32000000>;
+ regulator-min-microamp = <306000>;
+ regulator-max-microamp = <12114000>;
+ regulator-allowed-modes = <0 1>;
+ };
+ };
--
2.7.4
From: ChiYuan Huang <[email protected]>
Add support for Richtek RT6190 4-Switch BuckBoost controller.
Signed-off-by: ChiYuan Huang <[email protected]>
---
drivers/regulator/Kconfig | 11 +
drivers/regulator/Makefile | 1 +
drivers/regulator/rt6190-regulator.c | 495 +++++++++++++++++++++++++++++++++++
3 files changed, 507 insertions(+)
create mode 100644 drivers/regulator/rt6190-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 070e440..4e4614d 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1124,6 +1124,17 @@ config REGULATOR_RT6160
The wide output range is from 2025mV to 5200mV and can be used on most
common application scenario.
+config REGULATOR_RT6190
+ tristate "Richtek RT6190 4-Switch BuckBoost controller"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ The RT6190 is a 4-Switch BuckBoost controller designed for converting
+ input voltage to output voltage that can be equal to, higher or lower
+ than input voltage. It operates with wide input voltage range from
+ 4.5V to 36V, and the output voltage can be set from 3V to 36V by
+ external FB pin.
+
config REGULATOR_RT6245
tristate "Richtek RT6245 voltage regulator"
depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 5962307..c3b5cf6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -134,6 +134,7 @@ obj-$(CONFIG_REGULATOR_RT5120) += rt5120-regulator.o
obj-$(CONFIG_REGULATOR_RT5190A) += rt5190a-regulator.o
obj-$(CONFIG_REGULATOR_RT5759) += rt5759-regulator.o
obj-$(CONFIG_REGULATOR_RT6160) += rt6160-regulator.o
+obj-$(CONFIG_REGULATOR_RT6190) += rt6190-regulator.o
obj-$(CONFIG_REGULATOR_RT6245) += rt6245-regulator.o
obj-$(CONFIG_REGULATOR_RTMV20) += rtmv20-regulator.o
obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
diff --git a/drivers/regulator/rt6190-regulator.c b/drivers/regulator/rt6190-regulator.c
new file mode 100644
index 00000000..995e028
--- /dev/null
+++ b/drivers/regulator/rt6190-regulator.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2022 Richtek Technology Corp.
+ *
+ * Author: ChiYuan Huang <[email protected]>
+ *
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+#define RT6190_REG_VID 0x00
+#define RT6190_REG_OUTV 0x01
+#define RT6190_REG_OUTC 0x03
+#define RT6190_REG_SET1 0x0D
+#define RT6190_REG_SET2 0x0E
+#define RT6190_REG_SET4 0x10
+#define RT6190_REG_RATIO 0x11
+#define RT6190_REG_OUT_VOLT_L 0x12
+#define RT6190_REG_TEMP_H 0x1B
+#define RT6190_REG_STAT1 0x1C
+#define RT6190_REG_ALERT1 0x1E
+#define RT6190_REG_ALERT2 0x1F
+#define RT6190_REG_MASK2 0x21
+#define RT6190_REG_OCPEN 0x28
+#define RT6190_REG_SET5 0x29
+#define RT6190_REG_VBUSC_ADC 0x32
+#define RT6190_REG_BUSC_VOLT_L 0x33
+#define RT6190_REG_BUSC_VOLT_H 0x34
+#define RT6190_REG_STAT3 0x37
+#define RT6190_REG_ALERT3 0x38
+#define RT6190_REG_MASK3 0x39
+
+#define RT6190_ENPWM_MASK BIT(7)
+#define RT6190_ENDCHG_MASK BIT(4)
+#define RT6190_ALERT_OTPEVT BIT(6)
+#define RT6190_ALERT_UVPEVT BIT(5)
+#define RT6190_ALERT_OVPEVT BIT(4)
+#define RT6190_ENGCP_MASK BIT(1)
+#define RT6190_FCCM_MASK BIT(7)
+
+#define RICHTEK_VID 0x82
+#define RT6190_OUT_MIN_UV 3000000
+#define RT6190_OUT_MAX_UV 32000000
+#define RT6190_OUT_STEP_UV 20000
+#define RT6190_OUT_N_VOLT (RT6190_OUT_MAX_UV / RT6190_OUT_STEP_UV + 1)
+#define RT6190_OUTV_MINSEL 150
+#define RT6190_OUT_MIN_UA 306000
+#define RT6190_OUT_MAX_UA 12114000
+#define RT6190_OUT_STEP_UA 24000
+#define RT6190_OUTC_MINSEL 19
+#define RT6190_EN_TIME_US 500
+
+#define RT6190_PSM_MODE 0
+#define RT6190_FCCM_MODE 1
+
+struct rt6190_data {
+ struct device *dev;
+ struct regmap *regmap;
+ struct gpio_desc *enable_gpio;
+ unsigned int cached_alert_evt;
+};
+
+static int rt6190_out_set_voltage_sel(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ __le16 le_sel = cpu_to_le16(selector);
+
+ return regmap_raw_write(regmap, RT6190_REG_OUTV, &le_sel,
+ sizeof(le_sel));
+}
+
+static int rt6190_out_get_voltage_sel(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ __le16 le_sel;
+ int ret;
+
+ ret = regmap_raw_read(regmap, RT6190_REG_OUTV, &le_sel, sizeof(le_sel));
+
+ return ret ?: le16_to_cpu(le_sel);
+}
+
+static int rt6190_out_enable(struct regulator_dev *rdev)
+{
+ struct rt6190_data *data = rdev_get_drvdata(rdev);
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ u8 out_cfg[4];
+ int ret;
+
+ pm_runtime_get_sync(data->dev);
+
+ /*
+ * From off to on, vout config will restore to IC default.
+ * Read vout configs before enable, and restore them after enable
+ */
+ ret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,
+ sizeof(out_cfg));
+ if (ret)
+ return ret;
+
+ ret = regulator_enable_regmap(rdev);
+ if (ret)
+ return ret;
+
+ ret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,
+ sizeof(out_cfg));
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,
+ RT6190_ENGCP_MASK);
+}
+
+static int rt6190_out_disable(struct regulator_dev *rdev)
+{
+ struct rt6190_data *data = rdev_get_drvdata(rdev);
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int ret;
+
+ ret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, 0);
+ if (ret)
+ return ret;
+
+ ret = regulator_disable_regmap(rdev);
+ if (ret)
+ return ret;
+
+ /* cleared cached alert event */
+ data->cached_alert_evt = 0;
+
+ pm_runtime_put(data->dev);
+
+ return 0;
+}
+
+static int rt6190_out_set_current_limit(struct regulator_dev *rdev, int min_uA,
+ int max_uA)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ int csel, clim;
+ __le16 le_csel;
+
+ if (min_uA < RT6190_OUT_MIN_UA || max_uA > RT6190_OUT_MAX_UA)
+ return -EINVAL;
+
+ csel = DIV_ROUND_UP(min_uA - RT6190_OUT_MIN_UA, RT6190_OUT_STEP_UA);
+
+ clim = RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;
+ if (clim > max_uA)
+ return -EINVAL;
+
+ csel += RT6190_OUTC_MINSEL;
+ le_csel = cpu_to_le16(csel);
+
+ return regmap_raw_write(regmap, RT6190_REG_OUTC, &le_csel,
+ sizeof(le_csel));
+}
+
+static int rt6190_out_get_current_limit(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ __le16 le_csel;
+ int csel, ret;
+
+ ret = regmap_raw_read(regmap, RT6190_REG_OUTC, &le_csel,
+ sizeof(le_csel));
+ if (ret)
+ return ret;
+
+ csel = le16_to_cpu(le_csel);
+ csel -= RT6190_OUTC_MINSEL;
+
+ return RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;
+}
+
+static int rt6190_out_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ unsigned int val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = RT6190_FCCM_MASK;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(regmap, RT6190_REG_SET1, RT6190_FCCM_MASK,
+ val);
+}
+
+static unsigned int rt6190_out_get_mode(struct regulator_dev *rdev)
+{
+ struct regmap *regmap = rdev_get_regmap(rdev);
+ unsigned int config;
+ int ret;
+
+ ret = regmap_read(regmap, RT6190_REG_SET1, &config);
+ if (ret)
+ return REGULATOR_MODE_INVALID;
+
+ if (config & RT6190_FCCM_MASK)
+ return REGULATOR_MODE_FAST;
+
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int rt6190_out_get_error_flags(struct regulator_dev *rdev,
+ unsigned int *flags)
+{
+ struct rt6190_data *data = rdev_get_drvdata(rdev);
+ unsigned int state, rpt_flags = 0;
+ int ret;
+
+ ret = regmap_read(data->regmap, RT6190_REG_STAT1, &state);
+ if (ret)
+ return ret;
+
+ state |= data->cached_alert_evt;
+
+ if (state & RT6190_ALERT_OTPEVT)
+ rpt_flags |= REGULATOR_ERROR_OVER_TEMP;
+
+ if (state & RT6190_ALERT_UVPEVT)
+ rpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;
+
+ if (state & RT6190_ALERT_OVPEVT)
+ rpt_flags |= REGULATOR_ERROR_REGULATION_OUT;
+
+ *flags = rpt_flags;
+
+ return 0;
+}
+
+static unsigned int rt6190_out_of_map_mode(unsigned int mode)
+{
+ switch (mode) {
+ case RT6190_PSM_MODE:
+ return REGULATOR_MODE_NORMAL;
+ case RT6190_FCCM_MODE:
+ return REGULATOR_MODE_FAST;
+ default:
+ return REGULATOR_MODE_INVALID;
+ }
+}
+
+static const struct regulator_ops rt6190_regulator_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = rt6190_out_set_voltage_sel,
+ .get_voltage_sel = rt6190_out_get_voltage_sel,
+ .enable = rt6190_out_enable,
+ .disable = rt6190_out_disable,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_current_limit = rt6190_out_set_current_limit,
+ .get_current_limit = rt6190_out_get_current_limit,
+ .set_active_discharge = regulator_set_active_discharge_regmap,
+ .set_mode = rt6190_out_set_mode,
+ .get_mode = rt6190_out_get_mode,
+ .get_error_flags = rt6190_out_get_error_flags,
+};
+
+static const struct regulator_desc rt6190_regulator_desc = {
+ .name = "rt6190-regulator",
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &rt6190_regulator_ops,
+ .min_uV = RT6190_OUT_MIN_UV,
+ .uV_step = RT6190_OUT_STEP_UV,
+ .n_voltages = RT6190_OUT_N_VOLT,
+ .linear_min_sel = RT6190_OUTV_MINSEL,
+ .enable_reg = RT6190_REG_SET2,
+ .enable_mask = RT6190_ENPWM_MASK,
+ .active_discharge_reg = RT6190_REG_SET2,
+ .active_discharge_mask = RT6190_ENDCHG_MASK,
+ .active_discharge_on = RT6190_ENDCHG_MASK,
+ .of_map_mode = rt6190_out_of_map_mode,
+};
+
+static bool rt6190_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT6190_REG_OUT_VOLT_L ... RT6190_REG_ALERT2:
+ case RT6190_REG_BUSC_VOLT_L ... RT6190_REG_BUSC_VOLT_H:
+ case RT6190_REG_STAT3 ... RT6190_REG_ALERT3:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config rt6190_regmap_config = {
+ .name = "rt6190",
+ .cache_type = REGCACHE_FLAT,
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RT6190_REG_MASK3,
+ .num_reg_defaults_raw = RT6190_REG_MASK3 + 1,
+ .volatile_reg = rt6190_is_volatile_reg,
+};
+
+static irqreturn_t rt6190_irq_handler(int irq, void *devid)
+{
+ struct regulator_dev *rdev = devid;
+ struct rt6190_data *data = rdev_get_drvdata(rdev);
+ unsigned int alert;
+ int ret;
+
+ ret = regmap_read(data->regmap, RT6190_REG_ALERT1, &alert);
+ if (ret)
+ return IRQ_NONE;
+
+ /* Write clear alert events */
+ ret = regmap_write(data->regmap, RT6190_REG_ALERT1, alert);
+ if (ret)
+ return IRQ_NONE;
+
+ data->cached_alert_evt |= alert;
+
+ if (alert & RT6190_ALERT_OTPEVT)
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_TEMP, NULL);
+
+ if (alert & RT6190_ALERT_UVPEVT)
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL);
+
+ if (alert & RT6190_ALERT_OVPEVT)
+ regulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL);
+
+ return IRQ_HANDLED;
+}
+
+static int rt6190_init_registers(struct regmap *regmap)
+{
+ int ret;
+
+ /* Enable_ADC = 1 */
+ ret = regmap_write(regmap, RT6190_REG_SET4, 0x82);
+ if (ret)
+ return ret;
+
+ /* Config default VOUT ratio to be higher */
+ ret = regmap_write(regmap, RT6190_REG_RATIO, 0x20);
+
+ /* Mask unused alert */
+ ret = regmap_write(regmap, RT6190_REG_MASK2, 0);
+ if (ret)
+ return ret;
+
+ /* OCP config */
+ ret = regmap_write(regmap, RT6190_REG_OCPEN, 0);
+ if (ret)
+ return ret;
+
+ /* Enable VBUSC ADC */
+ return regmap_write(regmap, RT6190_REG_VBUSC_ADC, 0x02);
+}
+
+static int rt6190_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct rt6190_data *data;
+ struct gpio_desc *enable_gpio;
+ struct regmap *regmap;
+ struct regulator_dev *rdev;
+ struct regulator_config cfg = {};
+ unsigned int vid;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
+ if (IS_ERR(enable_gpio))
+ return dev_err_probe(dev, PTR_ERR(enable_gpio), "Failed to get 'enable' gpio\n");
+ else if (enable_gpio)
+ usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);
+
+ regmap = devm_regmap_init_i2c(i2c, &rt6190_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
+
+ data->dev = dev;
+ data->enable_gpio = enable_gpio;
+ data->regmap = regmap;
+ i2c_set_clientdata(i2c, data);
+
+ ret = regmap_read(regmap, RT6190_REG_VID, &vid);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read VID\n");
+
+ if (vid != RICHTEK_VID)
+ return dev_err_probe(dev, -ENODEV, "Incorrect VID 0x%02x\n", vid);
+
+ ret = rt6190_init_registers(regmap);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to init registers\n");
+
+ pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to set pm_runtime enable\n");
+
+ cfg.dev = dev;
+ cfg.of_node = dev->of_node;
+ cfg.driver_data = data;
+ cfg.init_data = of_get_regulator_init_data(dev, dev->of_node,
+ &rt6190_regulator_desc);
+
+ rdev = devm_regulator_register(dev, &rt6190_regulator_desc, &cfg);
+ if (IS_ERR(rdev))
+ return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register regulator\n");
+
+ if (i2c->irq) {
+ ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+ rt6190_irq_handler,
+ IRQF_ONESHOT, dev_name(dev),
+ rdev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to register interrupt\n");
+ }
+
+ return 0;
+}
+
+static int rt6190_runtime_suspend(struct device *dev)
+{
+ struct rt6190_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+
+ if (!data->enable_gpio)
+ return 0;
+
+ regcache_cache_only(regmap, true);
+ regcache_mark_dirty(regmap);
+
+ gpiod_set_value(data->enable_gpio, 0);
+
+ return 0;
+}
+
+static int rt6190_runtime_resume(struct device *dev)
+{
+ struct rt6190_data *data = dev_get_drvdata(dev);
+ struct regmap *regmap = data->regmap;
+
+ if (!data->enable_gpio)
+ return 0;
+
+ gpiod_set_value(data->enable_gpio, 1);
+ usleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);
+
+ regcache_cache_only(regmap, false);
+ return regcache_sync(regmap);
+}
+
+static const struct dev_pm_ops __maybe_unused rt6190_dev_pm = {
+ RUNTIME_PM_OPS(rt6190_runtime_suspend, rt6190_runtime_resume, NULL)
+};
+
+static const struct of_device_id rt6190_of_dev_table[] = {
+ { .compatible = "richtek,rt6190" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rt6190_of_dev_table);
+
+static struct i2c_driver rt6190_driver = {
+ .driver = {
+ .name = "rt6190",
+ .of_match_table = rt6190_of_dev_table,
+ .pm = pm_ptr(&rt6190_dev_pm),
+ },
+ .probe_new = rt6190_probe,
+};
+module_i2c_driver(rt6190_driver);
+
+MODULE_DESCRIPTION("Richtek RT6190 regulator driver");
+MODULE_AUTHOR("ChiYuan Huang <[email protected]>");
+MODULE_LICENSE("GPL");
--
2.7.4
On 20/10/2022 02:57, cy_huang wrote:
> From: ChiYuan Huang <[email protected]>
>
> Add devicetree binding for Richtek RT6190 4-Switch buckboost controller.
>
> Signed-off-by: ChiYuan Huang <[email protected]>
> ---
> .../regulator/richtek,rt6190-regulator.yaml | 77 ++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
>
> diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
> new file mode 100644
> index 00000000..be0fa7f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/richtek,rt6190-regulator.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/richtek,rt6190-regulator.yaml#
Filename based on compatible, so just richtek,rt6190.yaml
Unless it is a part of some MFD-like device, but then compatibles needs
fixes.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Richtek RT6190 4-Switch BuckBoost controller
> +
> +maintainers:
> + - ChiYuan Huang <[email protected]>
> +
> +description: |
> + The RT6190 is 4-Switch BuckBoost controller designed for converting input
> + voltage to output voltage that can be equal to, higher or lower than input
> + voltage. It operates with wide input voltage range from 4.5V to 36V, and
> + the output voltage can be set from 3V to 36V by external FB pin. It's commonly
> + used for the application like as BuckBoost bus upply, docking station and USB
> + power delivery product.
> +
> + Datasheet is available at
> + https://www.richtek.com/assets/product_file/RT6190/DS6190-02.pdf
> +
> +allOf:
> + - $ref: regulator.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + - richtek,rt6190
Best regards,
Krzysztof