The preferred name suffix for properties with single and multiple GPIOs
is "gpios". Linux GPIO core code supports both. Bindings are going to
expect the "gpios" one:
qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index d8734913482f..dbd5f7e2df65 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -54,7 +54,7 @@ lp5562@30 {
reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
- enable-gpio = <&pm8994_gpios 7 1>;
+ enable-gpios = <&pm8994_gpios 7 1>;
clock-mode = /bits/8 <2>;
label = "button-backlight";
--
2.34.1
On 27.11.2022 21:32, Krzysztof Kozlowski wrote:
> The preferred name suffix for properties with single and multiple GPIOs
> is "gpios". Linux GPIO core code supports both. Bindings are going to
> expect the "gpios" one:
>
> qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
> ---
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
>
> Changes since v1:
> 1. New patch
> ---
> arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> index d8734913482f..dbd5f7e2df65 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
> @@ -54,7 +54,7 @@ lp5562@30 {
> reg = <0x30>;
> #address-cells = <1>;
> #size-cells = <0>;
> - enable-gpio = <&pm8994_gpios 7 1>;
> + enable-gpios = <&pm8994_gpios 7 1>;
> clock-mode = /bits/8 <2>;
> label = "button-backlight";
>
On Sun, 27 Nov 2022 21:32:38 +0100, Krzysztof Kozlowski wrote:
> The preferred name suffix for properties with single and multiple GPIOs
> is "gpios". Linux GPIO core code supports both. Bindings are going to
> expect the "gpios" one:
>
> qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
>
>
> [...]
Applied, thanks!
[3/3] ARM: dts: qcom: align LED node names with dtschema
commit: 3ebeed30209aa50505956076aff1cf00a6381760
Best regards,
--
Bjorn Andersson <[email protected]>
On Sun, 27 Nov 2022 21:32:38 +0100, Krzysztof Kozlowski wrote:
> The preferred name suffix for properties with single and multiple GPIOs
> is "gpios". Linux GPIO core code supports both. Bindings are going to
> expect the "gpios" one:
>
> qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
>
>
> [...]
Applied, thanks!
[1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
commit: 4df05b44468cdf5dea7a7aa291eeabd7e639f8ff
[2/3] arm64: dts: qcom: align LED node names with dtschema
(no commit info)
Best regards,
--
Bjorn Andersson <[email protected]>