This patchset is pre-requisite to export and provision device
config attributes and features for vdpa live migration, in a way
backward and forward compatibility can be retained. The follow up
work [1] will need to be built around the new feature provisioning
uAPI, with which it's easier to formalize migration compatibility
support at the driver level.
Thanks,
-Siwei
[1] [PATCH v3 0/4] vDPA: initial config export via "vdpa dev show"
https://lore.kernel.org/virtualization/[email protected]/
---
Si-Wei Liu (6):
vdpa: fix improper error message when adding vdpa dev
vdpa: conditionally read STATUS in config space
vdpa: validate provisioned device features against specified attribute
virtio: VIRTIO_DEVICE_F_MASK for all per-device features
vdpa: validate device feature provisioning against supported class
vdpa/mlx5: support device features provisioning
drivers/vdpa/mlx5/net/mlx5_vnet.c | 72 ++++++++++++++++++++++------
drivers/vdpa/vdpa.c | 98 ++++++++++++++++++++++++++++++++------
include/uapi/linux/virtio_config.h | 8 ++++
3 files changed, 149 insertions(+), 29 deletions(-)
--
1.8.3.1
The spec says:
status only exists if VIRTIO_NET_F_STATUS is set
Similar to MAC and MTU, vdpa_dev_net_config_fill() should read
STATUS conditionally depending on the feature bits.
Signed-off-by: Si-Wei Liu <[email protected]>
---
drivers/vdpa/vdpa.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 5e57935..5f4883b 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -848,18 +848,25 @@ static int vdpa_dev_net_mac_config_fill(struct sk_buff *msg, u64 features,
sizeof(config->mac), config->mac);
}
+static int vdpa_dev_net_status_config_fill(struct sk_buff *msg, u64 features,
+ const struct virtio_net_config *config)
+{
+ u16 val_u16;
+
+ if ((features & BIT_ULL(VIRTIO_NET_F_STATUS)) == 0)
+ return 0;
+
+ val_u16 = __virtio16_to_cpu(true, config->status);
+ return nla_put_u16(msg, VDPA_ATTR_DEV_NET_STATUS, val_u16);
+}
+
static int vdpa_dev_net_config_fill(struct vdpa_device *vdev, struct sk_buff *msg)
{
struct virtio_net_config config = {};
u64 features_device;
- u16 val_u16;
vdev->config->get_config(vdev, 0, &config, sizeof(config));
- val_u16 = __virtio16_to_cpu(true, config.status);
- if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_STATUS, val_u16))
- return -EMSGSIZE;
-
features_device = vdev->config->get_device_features(vdev);
if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_FEATURES, features_device,
@@ -872,6 +879,9 @@ static int vdpa_dev_net_config_fill(struct vdpa_device *vdev, struct sk_buff *ms
if (vdpa_dev_net_mac_config_fill(msg, features_device, &config))
return -EMSGSIZE;
+ if (vdpa_dev_net_status_config_fill(msg, features_device, &config))
+ return -EMSGSIZE;
+
return vdpa_dev_net_mq_config_fill(msg, features_device, &config);
}
--
1.8.3.1
In below example, before the fix, mtu attribute is supported
by the parent mgmtdev, but the error message showing "All
provided are not supported" is just misleading.
$ vdpa mgmtdev show
vdpasim_net:
supported_classes net
max_supported_vqs 3
dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
$ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2
Error: vdpa: All provided attributes are not supported.
kernel answers: Operation not supported
After fix, the relevant error message will be like:
$ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2
Error: vdpa: Some provided attributes are not supported.
kernel answers: Operation not supported
$ vdpa dev add mgmtdev vdpasim_net name vdpasim0 max_vqp 2
Error: vdpa: All provided attributes are not supported.
kernel answers: Operation not supported
Signed-off-by: Si-Wei Liu <[email protected]>
Acked-by: Jason Wang <[email protected]>
---
drivers/vdpa/vdpa.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 8ef7aa1..5e57935 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -622,13 +622,20 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
err = PTR_ERR(mdev);
goto err;
}
- if ((config.mask & mdev->config_attr_mask) != config.mask) {
+ if (config.mask && (config.mask & mdev->config_attr_mask) == 0) {
NL_SET_ERR_MSG_MOD(info->extack,
"All provided attributes are not supported");
err = -EOPNOTSUPP;
goto err;
}
+ if ((config.mask & mdev->config_attr_mask) != config.mask) {
+ NL_SET_ERR_MSG_MOD(info->extack,
+ "Some provided attributes are not supported");
+ err = -EOPNOTSUPP;
+ goto err;
+ }
+
err = mdev->ops->dev_add(mdev, name, &config);
err:
up_write(&vdpa_dev_lock);
--
1.8.3.1
With device feature provisioning, there's a chance for misconfiguration
that the vdpa feature attribute supplied in 'vdpa dev add' command doesn't
get selected on the device_features to be provisioned. For instance, when
a @mac attribute is specified, the corresponding feature bit _F_MAC in
device_features should be set for consistency. If there's conflict on
provisioned features against the attribute, it should be treated as an
error to fail the ambiguous command. Noted the opposite is not
necessarily true, for e.g. it's okay to have _F_MAC set in device_features
without providing a corresponding @mac attribute, in which case the vdpa
vendor driver could load certain default value for attribute that is not
explicitly specified.
Generalize this check in vdpa core so that there's no duplicate code in
each vendor driver.
Signed-off-by: Si-Wei Liu <[email protected]>
---
drivers/vdpa/vdpa.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 5f4883b..6d02b8c 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -601,8 +601,26 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP);
}
if (nl_attrs[VDPA_ATTR_DEV_FEATURES]) {
+ u64 missing = 0x0ULL;
+
config.device_features =
nla_get_u64(nl_attrs[VDPA_ATTR_DEV_FEATURES]);
+ if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR] &&
+ !(config.device_features & BIT_ULL(VIRTIO_NET_F_MAC)))
+ missing |= BIT_ULL(VIRTIO_NET_F_MAC);
+ if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MTU] &&
+ !(config.device_features & BIT_ULL(VIRTIO_NET_F_MTU)))
+ missing |= BIT_ULL(VIRTIO_NET_F_MTU);
+ if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MAX_VQP] &&
+ config.net.max_vq_pairs > 1 &&
+ !(config.device_features & BIT_ULL(VIRTIO_NET_F_MQ)))
+ missing |= BIT_ULL(VIRTIO_NET_F_MQ);
+ if (missing) {
+ NL_SET_ERR_MSG_FMT_MOD(info->extack,
+ "Missing features 0x%llx for provided attributes",
+ missing);
+ return -EINVAL;
+ }
config.mask |= BIT_ULL(VDPA_ATTR_DEV_FEATURES);
}
--
1.8.3.1
Today when device features are explicitly provisioned, the features
user supplied may contain device class specific features that are
not supported by the parent managment device. On the other hand,
when parent managment device supports more than one class, the
device features to provision may be ambiguous if none of the class
specific attributes is provided at the same time. Validate these
cases and prompt appropriate user errors accordingly.
Signed-off-by: Si-Wei Liu <[email protected]>
---
drivers/vdpa/vdpa.c | 51 ++++++++++++++++++++++++++++++++++++++++++---------
1 file changed, 42 insertions(+), 9 deletions(-)
diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
index 6d02b8c..d5d6729 100644
--- a/drivers/vdpa/vdpa.c
+++ b/drivers/vdpa/vdpa.c
@@ -460,12 +460,30 @@ static int vdpa_nl_mgmtdev_handle_fill(struct sk_buff *msg, const struct vdpa_mg
return 0;
}
+static u64 vdpa_mgmtdev_get_classes(const struct vdpa_mgmt_dev *mdev,
+ unsigned int *nclasses)
+{
+ u64 supported_classes = 0;
+ unsigned int n = 0;
+ int i = 0;
+
+ while (mdev->id_table[i].device) {
+ if (mdev->id_table[i].device <= 63) {
+ supported_classes |= BIT_ULL(mdev->id_table[i].device);
+ n++;
+ }
+ i++;
+ }
+ if (nclasses)
+ *nclasses = n;
+
+ return supported_classes;
+}
+
static int vdpa_mgmtdev_fill(const struct vdpa_mgmt_dev *mdev, struct sk_buff *msg,
u32 portid, u32 seq, int flags)
{
- u64 supported_classes = 0;
void *hdr;
- int i = 0;
int err;
hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags, VDPA_CMD_MGMTDEV_NEW);
@@ -475,14 +493,9 @@ static int vdpa_mgmtdev_fill(const struct vdpa_mgmt_dev *mdev, struct sk_buff *m
if (err)
goto msg_err;
- while (mdev->id_table[i].device) {
- if (mdev->id_table[i].device <= 63)
- supported_classes |= BIT_ULL(mdev->id_table[i].device);
- i++;
- }
-
if (nla_put_u64_64bit(msg, VDPA_ATTR_MGMTDEV_SUPPORTED_CLASSES,
- supported_classes, VDPA_ATTR_UNSPEC)) {
+ vdpa_mgmtdev_get_classes(mdev, NULL),
+ VDPA_ATTR_UNSPEC)) {
err = -EMSGSIZE;
goto msg_err;
}
@@ -571,8 +584,10 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
struct vdpa_dev_set_config config = {};
struct nlattr **nl_attrs = info->attrs;
struct vdpa_mgmt_dev *mdev;
+ unsigned int ncls = 0;
const u8 *macaddr;
const char *name;
+ u64 classes;
int err = 0;
if (!info->attrs[VDPA_ATTR_DEV_NAME])
@@ -654,6 +669,24 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
goto err;
}
+ classes = vdpa_mgmtdev_get_classes(mdev, &ncls);
+ if (config.mask & VDPA_DEV_NET_ATTRS_MASK &&
+ !(classes & BIT_ULL(VIRTIO_ID_NET))) {
+ NL_SET_ERR_MSG_MOD(info->extack,
+ "Network class attributes provided on unsupported management device");
+ err = -EINVAL;
+ goto err;
+ }
+ if (!(config.mask & VDPA_DEV_NET_ATTRS_MASK) &&
+ config.mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES) &&
+ classes & BIT_ULL(VIRTIO_ID_NET) && ncls > 1 &&
+ config.device_features & VIRTIO_DEVICE_F_MASK) {
+ NL_SET_ERR_MSG_MOD(info->extack,
+ "Management device supports multi-class while device features specified are ambiguous");
+ err = -EINVAL;
+ goto err;
+ }
+
err = mdev->ops->dev_add(mdev, name, &config);
err:
up_write(&vdpa_dev_lock);
--
1.8.3.1
This patch implements features provisioning for mlx5_vdpa.
1) Validate the provisioned features are a subset of the parent
features.
2) Clearing features that are not wanted by userspace.
3) Set config space field only when the corresponding feature is
provisioned.
For example:
# vdpa mgmtdev show
pci/0000:41:04.2:
supported_classes net
max_supported_vqs 65
dev_features CSUM GUEST_CSUM MTU MAC HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
1) Provision vDPA device with all features derived from the parent
# vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2
# vdpa dev config show
vdpa1: mac e4:11:c6:d3:45:f0 link up link_announce false max_vq_pairs 1 mtu 1500
negotiated_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
2) Provision vDPA device with a subset of parent features
# vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2 device_features 0x300020000
# vdpa dev config show
vdpa1:
negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
Signed-off-by: Si-Wei Liu <[email protected]>
---
drivers/vdpa/mlx5/net/mlx5_vnet.c | 72 +++++++++++++++++++++++++++++++--------
1 file changed, 58 insertions(+), 14 deletions(-)
diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 3a6dbbc6..5d6dfd2 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -2183,6 +2183,7 @@ static u64 get_supported_features(struct mlx5_core_dev *mdev)
mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_STATUS);
mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_MTU);
mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_CTRL_VLAN);
+ mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_MAC);
return mlx_vdpa_features;
}
@@ -3009,6 +3010,8 @@ static int event_handler(struct notifier_block *nb, unsigned long event, void *p
struct mlx5_vdpa_wq_ent *wqent;
if (event == MLX5_EVENT_TYPE_PORT_CHANGE) {
+ if (!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_NET_F_STATUS)))
+ return NOTIFY_DONE;
switch (eqe->sub_type) {
case MLX5_PORT_CHANGE_SUBTYPE_DOWN:
case MLX5_PORT_CHANGE_SUBTYPE_ACTIVE:
@@ -3060,6 +3063,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
struct mlx5_vdpa_dev *mvdev;
struct mlx5_vdpa_net *ndev;
struct mlx5_core_dev *mdev;
+ u64 device_features;
u32 max_vqs;
u16 mtu;
int err;
@@ -3068,6 +3072,25 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
return -ENOSPC;
mdev = mgtdev->madev->mdev;
+ device_features = mgtdev->mgtdev.supported_features;
+ if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
+ if (add_config->device_features & ~device_features) {
+ dev_warn(mdev->device,
+ "The provisioned features 0x%llx are not supported by this device with features 0x%llx\n",
+ add_config->device_features, device_features);
+ return -EINVAL;
+ }
+ device_features &= add_config->device_features;
+ }
+ if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES) &&
+ !(device_features & BIT_ULL(VIRTIO_F_VERSION_1) &&
+ device_features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM))) {
+ dev_warn(mdev->device,
+ "Must provision minimum features 0x%llx for this device",
+ BIT_ULL(VIRTIO_F_VERSION_1) | BIT_ULL(VIRTIO_F_ACCESS_PLATFORM));
+ return -EOPNOTSUPP;
+ }
+
if (!(MLX5_CAP_DEV_VDPA_EMULATION(mdev, virtio_queue_type) &
MLX5_VIRTIO_EMULATION_CAP_VIRTIO_QUEUE_TYPE_SPLIT)) {
dev_warn(mdev->device, "missing support for split virtqueues\n");
@@ -3096,7 +3119,6 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
if (IS_ERR(ndev))
return PTR_ERR(ndev);
- ndev->mvdev.mlx_features = mgtdev->mgtdev.supported_features;
ndev->mvdev.max_vqs = max_vqs;
mvdev = &ndev->mvdev;
mvdev->mdev = mdev;
@@ -3118,20 +3140,26 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
goto err_alloc;
}
- err = query_mtu(mdev, &mtu);
- if (err)
- goto err_alloc;
+ if (device_features & BIT_ULL(VIRTIO_NET_F_MTU)) {
+ err = query_mtu(mdev, &mtu);
+ if (err)
+ goto err_alloc;
- ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, mtu);
+ ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, mtu);
+ }
- if (get_link_state(mvdev))
- ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
- else
- ndev->config.status &= cpu_to_mlx5vdpa16(mvdev, ~VIRTIO_NET_S_LINK_UP);
+ if (device_features & BIT_ULL(VIRTIO_NET_F_STATUS)) {
+ if (get_link_state(mvdev))
+ ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
+ else
+ ndev->config.status &= cpu_to_mlx5vdpa16(mvdev, ~VIRTIO_NET_S_LINK_UP);
+ }
if (add_config->mask & (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR)) {
memcpy(ndev->config.mac, add_config->net.mac, ETH_ALEN);
- } else {
+ /* No bother setting mac address in config if not going to provision _F_MAC */
+ } else if ((add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) == 0 ||
+ device_features & BIT_ULL(VIRTIO_NET_F_MAC)) {
err = mlx5_query_nic_vport_mac_address(mdev, 0, 0, config->mac);
if (err)
goto err_alloc;
@@ -3142,11 +3170,26 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
err = mlx5_mpfs_add_mac(pfmdev, config->mac);
if (err)
goto err_alloc;
-
- ndev->mvdev.mlx_features |= BIT_ULL(VIRTIO_NET_F_MAC);
+ } else if ((add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) == 0) {
+ /*
+ * We used to clear _F_MAC feature bit if seeing
+ * zero mac address when device features are not
+ * specifically provisioned. Keep the behaviour
+ * so old scripts do not break.
+ */
+ device_features &= ~BIT_ULL(VIRTIO_NET_F_MAC);
+ } else if (device_features & BIT_ULL(VIRTIO_NET_F_MAC)) {
+ /* Don't provision zero mac address for _F_MAC */
+ mlx5_vdpa_warn(&ndev->mvdev,
+ "No mac address provisioned?\n");
+ err = -EINVAL;
+ goto err_alloc;
}
- config->max_virtqueue_pairs = cpu_to_mlx5vdpa16(mvdev, max_vqs / 2);
+ if (device_features & BIT_ULL(VIRTIO_NET_F_MQ))
+ config->max_virtqueue_pairs = cpu_to_mlx5vdpa16(mvdev, max_vqs / 2);
+
+ ndev->mvdev.mlx_features = device_features;
mvdev->vdev.dma_dev = &mdev->pdev->dev;
err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
if (err)
@@ -3243,7 +3286,8 @@ static int mlx5v_probe(struct auxiliary_device *adev,
mgtdev->mgtdev.id_table = id_table;
mgtdev->mgtdev.config_attr_mask = BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR) |
BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP) |
- BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU);
+ BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU) |
+ BIT_ULL(VDPA_ATTR_DEV_FEATURES);
mgtdev->mgtdev.max_supported_vqs =
MLX5_CAP_DEV_VDPA_EMULATION(mdev, max_num_virtio_queues) + 1;
mgtdev->mgtdev.supported_features = get_supported_features(mdev);
--
1.8.3.1
Introduce VIRTIO_DEVICE_F_MASK bitmask used for identification
of per-device features. Feature bits VIRTIO_TRANSPORT_F_START
through VIRTIO_TRANSPORT_F_END are reserved for transport
features hence are not counted as per-device features against
the 64bit feature space.
Signed-off-by: Si-Wei Liu <[email protected]>
---
include/uapi/linux/virtio_config.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/include/uapi/linux/virtio_config.h b/include/uapi/linux/virtio_config.h
index 3c05162..3bdc7ed 100644
--- a/include/uapi/linux/virtio_config.h
+++ b/include/uapi/linux/virtio_config.h
@@ -54,6 +54,14 @@
#define VIRTIO_TRANSPORT_F_START 28
#define VIRTIO_TRANSPORT_F_END 41
+/*
+ * Bitmask for all per-device features: feature bits VIRTIO_TRANSPORT_F_START
+ * through VIRTIO_TRANSPORT_F_END are unset, i.e. 0xfffffc000fffffff for
+ * all 64bit features
+ */
+#define VIRTIO_DEVICE_F_MASK (~0ULL << (VIRTIO_TRANSPORT_F_END + 1) | \
+ ((1ULL << VIRTIO_TRANSPORT_F_START) - 1))
+
#ifndef VIRTIO_CONFIG_NO_LEGACY
/* Do we get callbacks when the ring is completely used, even if we've
* suppressed them? */
--
1.8.3.1
On 30/01/2023 22:30, Si-Wei Liu wrote:
> In below example, before the fix, mtu attribute is supported
> by the parent mgmtdev, but the error message showing "All
> provided are not supported" is just misleading.
>
> $ vdpa mgmtdev show
> vdpasim_net:
> supported_classes net
> max_supported_vqs 3
> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1 ACCESS_PLATFORM
>
> $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2
> Error: vdpa: All provided attributes are not supported.
> kernel answers: Operation not supported
>
> After fix, the relevant error message will be like:
>
> $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2
> Error: vdpa: Some provided attributes are not supported.
> kernel answers: Operation not supported
>
> $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 max_vqp 2
> Error: vdpa: All provided attributes are not supported.
> kernel answers: Operation not supported
>
> Signed-off-by: Si-Wei Liu <[email protected]>
> Acked-by: Jason Wang <[email protected]>
> ---
> drivers/vdpa/vdpa.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> index 8ef7aa1..5e57935 100644
> --- a/drivers/vdpa/vdpa.c
> +++ b/drivers/vdpa/vdpa.c
> @@ -622,13 +622,20 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
> err = PTR_ERR(mdev);
> goto err;
> }
> - if ((config.mask & mdev->config_attr_mask) != config.mask) {
> + if (config.mask && (config.mask & mdev->config_attr_mask) == 0) {
If config.mask is zero than the condition is false even without the
change so I don't see why is this change needed.
> NL_SET_ERR_MSG_MOD(info->extack,
> "All provided attributes are not supported");
> err = -EOPNOTSUPP;
> goto err;
> }
>
> + if ((config.mask & mdev->config_attr_mask) != config.mask) {
> + NL_SET_ERR_MSG_MOD(info->extack,
> + "Some provided attributes are not supported");
Changing the message is needed but maybe list the attributes that were
specified but are not supported?
> + err = -EOPNOTSUPP;
> + goto err;
> + }
> +
> err = mdev->ops->dev_add(mdev, name, &config);
> err:
> up_write(&vdpa_dev_lock);
On 30/01/2023 22:30, Si-Wei Liu wrote:
> The spec says:
> status only exists if VIRTIO_NET_F_STATUS is set
>
> Similar to MAC and MTU, vdpa_dev_net_config_fill() should read
> STATUS conditionally depending on the feature bits.
>
> Signed-off-by: Si-Wei Liu <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
> ---
> drivers/vdpa/vdpa.c | 20 +++++++++++++++-----
> 1 file changed, 15 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> index 5e57935..5f4883b 100644
> --- a/drivers/vdpa/vdpa.c
> +++ b/drivers/vdpa/vdpa.c
> @@ -848,18 +848,25 @@ static int vdpa_dev_net_mac_config_fill(struct sk_buff *msg, u64 features,
> sizeof(config->mac), config->mac);
> }
>
> +static int vdpa_dev_net_status_config_fill(struct sk_buff *msg, u64 features,
> + const struct virtio_net_config *config)
> +{
> + u16 val_u16;
> +
> + if ((features & BIT_ULL(VIRTIO_NET_F_STATUS)) == 0)
> + return 0;
> +
> + val_u16 = __virtio16_to_cpu(true, config->status);
> + return nla_put_u16(msg, VDPA_ATTR_DEV_NET_STATUS, val_u16);
> +}
> +
> static int vdpa_dev_net_config_fill(struct vdpa_device *vdev, struct sk_buff *msg)
> {
> struct virtio_net_config config = {};
> u64 features_device;
> - u16 val_u16;
>
> vdev->config->get_config(vdev, 0, &config, sizeof(config));
>
> - val_u16 = __virtio16_to_cpu(true, config.status);
> - if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_STATUS, val_u16))
> - return -EMSGSIZE;
> -
> features_device = vdev->config->get_device_features(vdev);
>
> if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_FEATURES, features_device,
> @@ -872,6 +879,9 @@ static int vdpa_dev_net_config_fill(struct vdpa_device *vdev, struct sk_buff *ms
> if (vdpa_dev_net_mac_config_fill(msg, features_device, &config))
> return -EMSGSIZE;
>
> + if (vdpa_dev_net_status_config_fill(msg, features_device, &config))
> + return -EMSGSIZE;
> +
> return vdpa_dev_net_mq_config_fill(msg, features_device, &config);
> }
>
On 30/01/2023 22:30, Si-Wei Liu wrote:
> With device feature provisioning, there's a chance for misconfiguration
> that the vdpa feature attribute supplied in 'vdpa dev add' command doesn't
> get selected on the device_features to be provisioned. For instance, when
> a @mac attribute is specified, the corresponding feature bit _F_MAC in
> device_features should be set for consistency. If there's conflict on
> provisioned features against the attribute, it should be treated as an
> error to fail the ambiguous command. Noted the opposite is not
> necessarily true, for e.g. it's okay to have _F_MAC set in device_features
> without providing a corresponding @mac attribute, in which case the vdpa
> vendor driver could load certain default value for attribute that is not
> explicitly specified.
>
> Generalize this check in vdpa core so that there's no duplicate code in
> each vendor driver.
>
> Signed-off-by: Si-Wei Liu <[email protected]>
Reviewed-by: Eli Cohen <[email protected]>
> ---
> drivers/vdpa/vdpa.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
> index 5f4883b..6d02b8c 100644
> --- a/drivers/vdpa/vdpa.c
> +++ b/drivers/vdpa/vdpa.c
> @@ -601,8 +601,26 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *i
> config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP);
> }
> if (nl_attrs[VDPA_ATTR_DEV_FEATURES]) {
> + u64 missing = 0x0ULL;
> +
> config.device_features =
> nla_get_u64(nl_attrs[VDPA_ATTR_DEV_FEATURES]);
> + if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR] &&
> + !(config.device_features & BIT_ULL(VIRTIO_NET_F_MAC)))
> + missing |= BIT_ULL(VIRTIO_NET_F_MAC);
> + if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MTU] &&
> + !(config.device_features & BIT_ULL(VIRTIO_NET_F_MTU)))
> + missing |= BIT_ULL(VIRTIO_NET_F_MTU);
> + if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MAX_VQP] &&
> + config.net.max_vq_pairs > 1 &&
> + !(config.device_features & BIT_ULL(VIRTIO_NET_F_MQ)))
> + missing |= BIT_ULL(VIRTIO_NET_F_MQ);
> + if (missing) {
> + NL_SET_ERR_MSG_FMT_MOD(info->extack,
> + "Missing features 0x%llx for provided attributes",
> + missing);
> + return -EINVAL;
> + }
> config.mask |= BIT_ULL(VDPA_ATTR_DEV_FEATURES);
> }
>
On 30/01/2023 22:30, Si-Wei Liu wrote:
> This patch implements features provisioning for mlx5_vdpa.
>
> 1) Validate the provisioned features are a subset of the parent
> features.
> 2) Clearing features that are not wanted by userspace.
> 3) Set config space field only when the corresponding feature is
> provisioned.
>
> For example:
>
> # vdpa mgmtdev show
> pci/0000:41:04.2:
> supported_classes net
> max_supported_vqs 65
> dev_features CSUM GUEST_CSUM MTU MAC HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> 1) Provision vDPA device with all features derived from the parent
>
> # vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2
> # vdpa dev config show
> vdpa1: mac e4:11:c6:d3:45:f0 link up link_announce false max_vq_pairs 1 mtu 1500
> negotiated_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>
> 2) Provision vDPA device with a subset of parent features
>
> # vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2 device_features 0x300020000
> # vdpa dev config show
> vdpa1:
> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>
> Signed-off-by: Si-Wei Liu <[email protected]>
> ---
> drivers/vdpa/mlx5/net/mlx5_vnet.c | 72 +++++++++++++++++++++++++++++++--------
> 1 file changed, 58 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index 3a6dbbc6..5d6dfd2 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -2183,6 +2183,7 @@ static u64 get_supported_features(struct mlx5_core_dev *mdev)
> mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_STATUS);
> mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_MTU);
> mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_CTRL_VLAN);
> + mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_MAC);
>
> return mlx_vdpa_features;
> }
> @@ -3009,6 +3010,8 @@ static int event_handler(struct notifier_block *nb, unsigned long event, void *p
> struct mlx5_vdpa_wq_ent *wqent;
>
> if (event == MLX5_EVENT_TYPE_PORT_CHANGE) {
> + if (!(ndev->mvdev.actual_features & BIT_ULL(VIRTIO_NET_F_STATUS)))
> + return NOTIFY_DONE;
Does not belong in this patch
> switch (eqe->sub_type) {
> case MLX5_PORT_CHANGE_SUBTYPE_DOWN:
> case MLX5_PORT_CHANGE_SUBTYPE_ACTIVE:
> @@ -3060,6 +3063,7 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> struct mlx5_vdpa_dev *mvdev;
> struct mlx5_vdpa_net *ndev;
> struct mlx5_core_dev *mdev;
> + u64 device_features;
> u32 max_vqs;
> u16 mtu;
> int err;
> @@ -3068,6 +3072,25 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> return -ENOSPC;
>
> mdev = mgtdev->madev->mdev;
> + device_features = mgtdev->mgtdev.supported_features;
> + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
> + if (add_config->device_features & ~device_features) {
> + dev_warn(mdev->device,
> + "The provisioned features 0x%llx are not supported by this device with features 0x%llx\n",
> + add_config->device_features, device_features);
> + return -EINVAL;
> + }
> + device_features &= add_config->device_features;
> + }
> + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES) &&
This looks redundant.
> + !(device_features & BIT_ULL(VIRTIO_F_VERSION_1) &&
> + device_features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM))) {
> + dev_warn(mdev->device,
> + "Must provision minimum features 0x%llx for this device",
> + BIT_ULL(VIRTIO_F_VERSION_1) | BIT_ULL(VIRTIO_F_ACCESS_PLATFORM));
> + return -EOPNOTSUPP;
> + }
> +
> if (!(MLX5_CAP_DEV_VDPA_EMULATION(mdev, virtio_queue_type) &
> MLX5_VIRTIO_EMULATION_CAP_VIRTIO_QUEUE_TYPE_SPLIT)) {
> dev_warn(mdev->device, "missing support for split virtqueues\n");
> @@ -3096,7 +3119,6 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> if (IS_ERR(ndev))
> return PTR_ERR(ndev);
>
> - ndev->mvdev.mlx_features = mgtdev->mgtdev.supported_features;
> ndev->mvdev.max_vqs = max_vqs;
> mvdev = &ndev->mvdev;
> mvdev->mdev = mdev;
> @@ -3118,20 +3140,26 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> goto err_alloc;
> }
>
> - err = query_mtu(mdev, &mtu);
> - if (err)
> - goto err_alloc;
> + if (device_features & BIT_ULL(VIRTIO_NET_F_MTU)) {
> + err = query_mtu(mdev, &mtu);
> + if (err)
> + goto err_alloc;
>
> - ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, mtu);
> + ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, mtu);
> + }
>
> - if (get_link_state(mvdev))
> - ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
> - else
> - ndev->config.status &= cpu_to_mlx5vdpa16(mvdev, ~VIRTIO_NET_S_LINK_UP);
> + if (device_features & BIT_ULL(VIRTIO_NET_F_STATUS)) {
> + if (get_link_state(mvdev))
> + ndev->config.status |= cpu_to_mlx5vdpa16(mvdev, VIRTIO_NET_S_LINK_UP);
> + else
> + ndev->config.status &= cpu_to_mlx5vdpa16(mvdev, ~VIRTIO_NET_S_LINK_UP);
> + }
Doesn't belong in this patch
>
> if (add_config->mask & (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR)) {
> memcpy(ndev->config.mac, add_config->net.mac, ETH_ALEN);
> - } else {
> + /* No bother setting mac address in config if not going to provision _F_MAC */
> + } else if ((add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) == 0 ||
> + device_features & BIT_ULL(VIRTIO_NET_F_MAC)) {
> err = mlx5_query_nic_vport_mac_address(mdev, 0, 0, config->mac);
> if (err)
> goto err_alloc;
> @@ -3142,11 +3170,26 @@ static int mlx5_vdpa_dev_add(struct vdpa_mgmt_dev *v_mdev, const char *name,
> err = mlx5_mpfs_add_mac(pfmdev, config->mac);
> if (err)
> goto err_alloc;
> -
> - ndev->mvdev.mlx_features |= BIT_ULL(VIRTIO_NET_F_MAC);
> + } else if ((add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) == 0) {
> + /*
> + * We used to clear _F_MAC feature bit if seeing
> + * zero mac address when device features are not
> + * specifically provisioned. Keep the behaviour
> + * so old scripts do not break.
> + */
> + device_features &= ~BIT_ULL(VIRTIO_NET_F_MAC);
> + } else if (device_features & BIT_ULL(VIRTIO_NET_F_MAC)) {
> + /* Don't provision zero mac address for _F_MAC */
> + mlx5_vdpa_warn(&ndev->mvdev,
> + "No mac address provisioned?\n");
> + err = -EINVAL;
> + goto err_alloc;
> }
>
> - config->max_virtqueue_pairs = cpu_to_mlx5vdpa16(mvdev, max_vqs / 2);
> + if (device_features & BIT_ULL(VIRTIO_NET_F_MQ))
> + config->max_virtqueue_pairs = cpu_to_mlx5vdpa16(mvdev, max_vqs / 2);
> +
> + ndev->mvdev.mlx_features = device_features;
> mvdev->vdev.dma_dev = &mdev->pdev->dev;
> err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
> if (err)
> @@ -3243,7 +3286,8 @@ static int mlx5v_probe(struct auxiliary_device *adev,
> mgtdev->mgtdev.id_table = id_table;
> mgtdev->mgtdev.config_attr_mask = BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR) |
> BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP) |
> - BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU);
> + BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU) |
> + BIT_ULL(VDPA_ATTR_DEV_FEATURES);
> mgtdev->mgtdev.max_supported_vqs =
> MLX5_CAP_DEV_VDPA_EMULATION(mdev, max_num_virtio_queues) + 1;
> mgtdev->mgtdev.supported_features = get_supported_features(mdev);
On 1/31/2023 3:42 AM, Eli Cohen wrote:
>
> On 30/01/2023 22:30, Si-Wei Liu wrote:
>> In below example, before the fix, mtu attribute is supported
>> by the parent mgmtdev, but the error message showing "All
>> provided are not supported" is just misleading.
>>
>> $ vdpa mgmtdev show
>> vdpasim_net:
>> supported_classes net
>> max_supported_vqs 3
>> dev_features MTU MAC CTRL_VQ CTRL_MAC_ADDR ANY_LAYOUT VERSION_1
>> ACCESS_PLATFORM
>>
>> $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2
>> Error: vdpa: All provided attributes are not supported.
>> kernel answers: Operation not supported
>>
>> After fix, the relevant error message will be like:
>>
>> $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 mtu 5000 max_vqp 2
>> Error: vdpa: Some provided attributes are not supported.
>> kernel answers: Operation not supported
>>
>> $ vdpa dev add mgmtdev vdpasim_net name vdpasim0 max_vqp 2
>> Error: vdpa: All provided attributes are not supported.
>> kernel answers: Operation not supported
>>
>> Signed-off-by: Si-Wei Liu <[email protected]>
>> Acked-by: Jason Wang <[email protected]>
>> ---
>> drivers/vdpa/vdpa.c | 9 ++++++++-
>> 1 file changed, 8 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/vdpa/vdpa.c b/drivers/vdpa/vdpa.c
>> index 8ef7aa1..5e57935 100644
>> --- a/drivers/vdpa/vdpa.c
>> +++ b/drivers/vdpa/vdpa.c
>> @@ -622,13 +622,20 @@ static int vdpa_nl_cmd_dev_add_set_doit(struct
>> sk_buff *skb, struct genl_info *i
>> err = PTR_ERR(mdev);
>> goto err;
>> }
>> - if ((config.mask & mdev->config_attr_mask) != config.mask) {
>> + if (config.mask && (config.mask & mdev->config_attr_mask) == 0) {
> If config.mask is zero than the condition is false even without the
> change so I don't see why is this change needed.
This way it spews error message when none of the attributes provided by
user is supported by device.
I can remove the check if improving error message for the other check
right below, but that is the expected conditional if the same error
message has to be kept.
>> NL_SET_ERR_MSG_MOD(info->extack,
>> "All provided attributes are not supported");
>> err = -EOPNOTSUPP;
>> goto err;
>> }
>> + if ((config.mask & mdev->config_attr_mask) != config.mask) {
>> + NL_SET_ERR_MSG_MOD(info->extack,
>> + "Some provided attributes are not supported");
> Changing the message is needed but maybe list the attributes that were
> specified but are not supported?
If you can live with numeric representing the attributes instead of
straight attribute string, certainly I can do that. Or else I anticipate
userspace to query and fail the command rather than present attribute
strings in kernel.
-Siwei
>> + err = -EOPNOTSUPP;
>> + goto err;
>> + }
>> +
>> err = mdev->ops->dev_add(mdev, name, &config);
>> err:
>> up_write(&vdpa_dev_lock);
On 1/31/2023 4:56 AM, Eli Cohen wrote:
>
> On 30/01/2023 22:30, Si-Wei Liu wrote:
>> This patch implements features provisioning for mlx5_vdpa.
>>
>> 1) Validate the provisioned features are a subset of the parent
>> features.
>> 2) Clearing features that are not wanted by userspace.
>> 3) Set config space field only when the corresponding feature is
>> provisioned.
>>
>> For example:
>>
>> # vdpa mgmtdev show
>> pci/0000:41:04.2:
>> supported_classes net
>> max_supported_vqs 65
>> dev_features CSUM GUEST_CSUM MTU MAC HOST_TSO4 HOST_TSO6 STATUS
>> CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>>
>> 1) Provision vDPA device with all features derived from the parent
>>
>> # vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2
>> # vdpa dev config show
>> vdpa1: mac e4:11:c6:d3:45:f0 link up link_announce false
>> max_vq_pairs 1 mtu 1500
>> negotiated_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6
>> STATUS CTRL_VQ CTRL_VLAN MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM
>>
>> 2) Provision vDPA device with a subset of parent features
>>
>> # vdpa dev add name vdpa1 mgmtdev pci/0000:41:04.2
>> device_features 0x300020000
>> # vdpa dev config show
>> vdpa1:
>> negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM
>>
>> Signed-off-by: Si-Wei Liu <[email protected]>
>> ---
>> drivers/vdpa/mlx5/net/mlx5_vnet.c | 72
>> +++++++++++++++++++++++++++++++--------
>> 1 file changed, 58 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c
>> b/drivers/vdpa/mlx5/net/mlx5_vnet.c
>> index 3a6dbbc6..5d6dfd2 100644
>> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
>> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
>> @@ -2183,6 +2183,7 @@ static u64 get_supported_features(struct
>> mlx5_core_dev *mdev)
>> mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_STATUS);
>> mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_MTU);
>> mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_CTRL_VLAN);
>> + mlx_vdpa_features |= BIT_ULL(VIRTIO_NET_F_MAC);
>> return mlx_vdpa_features;
>> }
>> @@ -3009,6 +3010,8 @@ static int event_handler(struct notifier_block
>> *nb, unsigned long event, void *p
>> struct mlx5_vdpa_wq_ent *wqent;
>> if (event == MLX5_EVENT_TYPE_PORT_CHANGE) {
>> + if (!(ndev->mvdev.actual_features &
>> BIT_ULL(VIRTIO_NET_F_STATUS)))
>> + return NOTIFY_DONE;
> Does not belong in this patch
Yep, I can split the patch. Though feature provisioning on mlx5_vdpa has
to depend on that patch.
>> switch (eqe->sub_type) {
>> case MLX5_PORT_CHANGE_SUBTYPE_DOWN:
>> case MLX5_PORT_CHANGE_SUBTYPE_ACTIVE:
>> @@ -3060,6 +3063,7 @@ static int mlx5_vdpa_dev_add(struct
>> vdpa_mgmt_dev *v_mdev, const char *name,
>> struct mlx5_vdpa_dev *mvdev;
>> struct mlx5_vdpa_net *ndev;
>> struct mlx5_core_dev *mdev;
>> + u64 device_features;
>> u32 max_vqs;
>> u16 mtu;
>> int err;
>> @@ -3068,6 +3072,25 @@ static int mlx5_vdpa_dev_add(struct
>> vdpa_mgmt_dev *v_mdev, const char *name,
>> return -ENOSPC;
>> mdev = mgtdev->madev->mdev;
>> + device_features = mgtdev->mgtdev.supported_features;
>> + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES)) {
>> + if (add_config->device_features & ~device_features) {
>> + dev_warn(mdev->device,
>> + "The provisioned features 0x%llx are not supported
>> by this device with features 0x%llx\n",
>> + add_config->device_features, device_features);
>> + return -EINVAL;
>> + }
>> + device_features &= add_config->device_features;
>> + }
>> + if (add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES) &&
> This looks redundant.
This will be handy to rewrite the conditional when legacy device (non
VERSION_1) is going to be provisioned which may support in future.. But
I can remove the check for now.
>> + !(device_features & BIT_ULL(VIRTIO_F_VERSION_1) &&
>> + device_features & BIT_ULL(VIRTIO_F_ACCESS_PLATFORM))) {
>> + dev_warn(mdev->device,
>> + "Must provision minimum features 0x%llx for this device",
>> + BIT_ULL(VIRTIO_F_VERSION_1) |
>> BIT_ULL(VIRTIO_F_ACCESS_PLATFORM));
>> + return -EOPNOTSUPP;
>> + }
>> +
>> if (!(MLX5_CAP_DEV_VDPA_EMULATION(mdev, virtio_queue_type) &
>> MLX5_VIRTIO_EMULATION_CAP_VIRTIO_QUEUE_TYPE_SPLIT)) {
>> dev_warn(mdev->device, "missing support for split
>> virtqueues\n");
>> @@ -3096,7 +3119,6 @@ static int mlx5_vdpa_dev_add(struct
>> vdpa_mgmt_dev *v_mdev, const char *name,
>> if (IS_ERR(ndev))
>> return PTR_ERR(ndev);
>> - ndev->mvdev.mlx_features = mgtdev->mgtdev.supported_features;
>> ndev->mvdev.max_vqs = max_vqs;
>> mvdev = &ndev->mvdev;
>> mvdev->mdev = mdev;
>> @@ -3118,20 +3140,26 @@ static int mlx5_vdpa_dev_add(struct
>> vdpa_mgmt_dev *v_mdev, const char *name,
>> goto err_alloc;
>> }
>> - err = query_mtu(mdev, &mtu);
>> - if (err)
>> - goto err_alloc;
>> + if (device_features & BIT_ULL(VIRTIO_NET_F_MTU)) {
>> + err = query_mtu(mdev, &mtu);
>> + if (err)
>> + goto err_alloc;
>> - ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, mtu);
>> + ndev->config.mtu = cpu_to_mlx5vdpa16(mvdev, mtu);
>> + }
>> - if (get_link_state(mvdev))
>> - ndev->config.status |= cpu_to_mlx5vdpa16(mvdev,
>> VIRTIO_NET_S_LINK_UP);
>> - else
>> - ndev->config.status &= cpu_to_mlx5vdpa16(mvdev,
>> ~VIRTIO_NET_S_LINK_UP);
>> + if (device_features & BIT_ULL(VIRTIO_NET_F_STATUS)) {
>> + if (get_link_state(mvdev))
>> + ndev->config.status |= cpu_to_mlx5vdpa16(mvdev,
>> VIRTIO_NET_S_LINK_UP);
>> + else
>> + ndev->config.status &= cpu_to_mlx5vdpa16(mvdev,
>> ~VIRTIO_NET_S_LINK_UP);
>> + }
> Doesn't belong in this patch
Will split patch.
-Siwei
>> if (add_config->mask & (1 << VDPA_ATTR_DEV_NET_CFG_MACADDR)) {
>> memcpy(ndev->config.mac, add_config->net.mac, ETH_ALEN);
>> - } else {
>> + /* No bother setting mac address in config if not going to
>> provision _F_MAC */
>> + } else if ((add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES))
>> == 0 ||
>> + device_features & BIT_ULL(VIRTIO_NET_F_MAC)) {
>> err = mlx5_query_nic_vport_mac_address(mdev, 0, 0,
>> config->mac);
>> if (err)
>> goto err_alloc;
>> @@ -3142,11 +3170,26 @@ static int mlx5_vdpa_dev_add(struct
>> vdpa_mgmt_dev *v_mdev, const char *name,
>> err = mlx5_mpfs_add_mac(pfmdev, config->mac);
>> if (err)
>> goto err_alloc;
>> -
>> - ndev->mvdev.mlx_features |= BIT_ULL(VIRTIO_NET_F_MAC);
>> + } else if ((add_config->mask & BIT_ULL(VDPA_ATTR_DEV_FEATURES))
>> == 0) {
>> + /*
>> + * We used to clear _F_MAC feature bit if seeing
>> + * zero mac address when device features are not
>> + * specifically provisioned. Keep the behaviour
>> + * so old scripts do not break.
>> + */
>> + device_features &= ~BIT_ULL(VIRTIO_NET_F_MAC);
>> + } else if (device_features & BIT_ULL(VIRTIO_NET_F_MAC)) {
>> + /* Don't provision zero mac address for _F_MAC */
>> + mlx5_vdpa_warn(&ndev->mvdev,
>> + "No mac address provisioned?\n");
>> + err = -EINVAL;
>> + goto err_alloc;
>> }
>> - config->max_virtqueue_pairs = cpu_to_mlx5vdpa16(mvdev, max_vqs
>> / 2);
>> + if (device_features & BIT_ULL(VIRTIO_NET_F_MQ))
>> + config->max_virtqueue_pairs = cpu_to_mlx5vdpa16(mvdev,
>> max_vqs / 2);
>> +
>> + ndev->mvdev.mlx_features = device_features;
>> mvdev->vdev.dma_dev = &mdev->pdev->dev;
>> err = mlx5_vdpa_alloc_resources(&ndev->mvdev);
>> if (err)
>> @@ -3243,7 +3286,8 @@ static int mlx5v_probe(struct auxiliary_device
>> *adev,
>> mgtdev->mgtdev.id_table = id_table;
>> mgtdev->mgtdev.config_attr_mask =
>> BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR) |
>> BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP) |
>> - BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU);
>> + BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU) |
>> + BIT_ULL(VDPA_ATTR_DEV_FEATURES);
>> mgtdev->mgtdev.max_supported_vqs =
>> MLX5_CAP_DEV_VDPA_EMULATION(mdev, max_num_virtio_queues) + 1;
>> mgtdev->mgtdev.supported_features = get_supported_features(mdev);