Add compatible for sm8450 IMEM.
Signed-off-by: Mukesh Ojha <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
---
Changes in v2:
- Added Acked-by .
Documentation/devicetree/bindings/sram/qcom,imem.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
index 665c06e..ba694ce 100644
--- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -26,6 +26,7 @@ properties:
- qcom,sdm845-imem
- qcom,sdx55-imem
- qcom,sdx65-imem
+ - qcom,sm8450-imem
- const: syscon
- const: simple-mfd
--
2.7.4
Add a simple-mfd representing IMEM on SM8450 and define the PIL
relocation info region, so that post mortem tools will be able
to locate the loaded remoteprocs.
Signed-off-by: Mukesh Ojha <[email protected]>
---
Changes in v2:
- put ranges after regs and corrected the sram node position.
arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 1a744a3..2a4f4ac 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -3814,6 +3814,20 @@
};
};
+ sram@146aa000 {
+ compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
+ reg = <0 0x146aa000 0 0x1000>;
+ ranges = <0 0 0x146aa000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+
timer@17420000 {
compatible = "arm,armv7-timer-mem";
#address-cells = <1>;
--
2.7.4
On Tue, 21 Feb 2023 19:06:55 +0530, Mukesh Ojha wrote:
> Add compatible for sm8450 IMEM.
>
> Signed-off-by: Mukesh Ojha <[email protected]>
> Acked-by: Krzysztof Kozlowski <[email protected]>
> ---
> Changes in v2:
> - Added Acked-by .
>
> Documentation/devicetree/bindings/sram/qcom,imem.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Applied, thanks!
On 21.02.2023 14:36, Mukesh Ojha wrote:
> Add a simple-mfd representing IMEM on SM8450 and define the PIL
> relocation info region, so that post mortem tools will be able
> to locate the loaded remoteprocs.
>
> Signed-off-by: Mukesh Ojha <[email protected]>
> ---
> Changes in v2:
> - put ranges after regs and corrected the sram node position.
>
> arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 1a744a3..2a4f4ac 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -3814,6 +3814,20 @@
> };
> };
>
> + sram@146aa000 {
Looks like it's not sorted properly? Should be between
TLMM and apss_smmu address-wise.
Konrad
> + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd";
> + reg = <0 0x146aa000 0 0x1000>;
> + ranges = <0 0 0x146aa000 0x1000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + pil-reloc@94c {
> + compatible = "qcom,pil-reloc-info";
> + reg = <0x94c 0xc8>;
> + };
> + };
> +
> timer@17420000 {
> compatible = "arm,armv7-timer-mem";
> #address-cells = <1>;