Enable PCIE0 PHY on SDX65 MTP for PCIE EP.
Signed-off-by: Rohit Agarwal <[email protected]>
---
arch/arm/boot/dts/qcom-sdx65-mtp.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
index 85ea02d..86bb853 100644
--- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
@@ -245,6 +245,13 @@
status = "okay";
};
+&pcie0_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1b_1p2>;
+ vdda-pll-supply = <&vreg_l4b_0p88>;
+};
+
&qpic_bam {
status = "okay";
};
--
2.7.4
On 6.03.2023 06:25, Rohit Agarwal wrote:
> Enable PCIE0 PHY on SDX65 MTP for PCIE EP.
>
> Signed-off-by: Rohit Agarwal <[email protected]>
> ---
Status should go last. It would be nice if you could update
that for the other nodes in this dt while at it.
Konrad
> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> index 85ea02d..86bb853 100644
> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
> @@ -245,6 +245,13 @@
> status = "okay";
> };
>
> +&pcie0_phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l1b_1p2>;
> + vdda-pll-supply = <&vreg_l4b_0p88>;
> +};
> +
> &qpic_bam {
> status = "okay";
> };
On 3/6/2023 4:00 PM, Konrad Dybcio wrote:
>
> On 6.03.2023 06:25, Rohit Agarwal wrote:
>> Enable PCIE0 PHY on SDX65 MTP for PCIE EP.
>>
>> Signed-off-by: Rohit Agarwal <[email protected]>
>> ---
> Status should go last. It would be nice if you could update
> that for the other nodes in this dt while at it.
Yes, Surely will do.
Thanks,
Rohit.
>
> Konrad
>> arch/arm/boot/dts/qcom-sdx65-mtp.dts | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> index 85ea02d..86bb853 100644
>> --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts
>> @@ -245,6 +245,13 @@
>> status = "okay";
>> };
>>
>> +&pcie0_phy {
>> + status = "okay";
>> +
>> + vdda-phy-supply = <&vreg_l1b_1p2>;
>> + vdda-pll-supply = <&vreg_l4b_0p88>;
>> +};
>> +
>> &qpic_bam {
>> status = "okay";
>> };