Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
USB controller is cadence USB 3.0 IP.
Signed-off-by: Minda Chen <[email protected]>
---
.../bindings/phy/starfive,jh7110-usb-phy.yaml | 116 ++++++++++++++++++
1 file changed, 116 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
new file mode 100644
index 000000000000..05b6c47d4a86
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
@@ -0,0 +1,116 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive USB 2.0 and 3.0 PHY
+
+maintainers:
+ - Minda Chen<[email protected]>
+
+properties:
+ compatible:
+ items:
+ - const: starfive,jh7110-usb-phy
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: usb3
+ - const: usb2
+
+ clocks:
+ maxItems: 8
+
+ clock-names:
+ items:
+ - const: usb_125m
+ - const: usb0_app_125
+ - const: usb0_lpm
+ - const: usb0_stb
+ - const: usb0_apb
+ - const: usb0_axi
+ - const: usb0_utmi_apb
+
+ resets:
+ items:
+ - description: USB0_PWRUP reset
+ - description: USB0_APB reset
+ - description: USB0_AXI reset
+ - description: USB0_UTMI_APB reset
+
+ starfive,sys-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ items:
+ - description: phandle to System Register Controller sys_syscon node.
+ - description: offset of SYS_SYSCONSAIF__SYSCFG register for USB.
+ description:
+ The phandle to System Register Controller syscon node and the offset
+ of SYS_SYSCONSAIF__SYSCFG register for USB.
+
+ starfive,stg-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - description: phandle to System Register Controller stg_syscon node.
+ - description: offset of STG_SYSCONSAIF__SYSCFG register for USB.
+ description:
+ The phandle to System Register Controller syscon node and the offset
+ of STG_SYSCONSAIF__SYSCFG register for USB. Total 4 regsisters offset
+ for USB.
+
+ dr_mode:
+ description: PHY mode.
+ enum:
+ - host
+ - peripheral
+ - otg
+
+ starfive,usb2-only
+ description: Set USB using usb 2.0 phy. Supprt USB 2.0 only
+
+ '#phy-cells':
+ const: 0
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - reset
+ - starfive,sys-syscon
+ - starfive,stg-syscon
+ - dr_mode
+ - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ usbphy@10200000 {
+ compatible = "starfive,jh7110-usb";
+ reg = <0x0 0x10210000 0x0 0x1000>,
+ <0x0 0x10200000 0x0 0x1000>;
+ reg-names = "usb3", "usb2";
+ clocks = <&syscrg 95>,
+ <&stgcrg 6>,
+ <&stgcrg 4>,
+ <&stgcrg 5>,
+ <&stgcrg 1>,
+ <&stgcrg 3>,
+ <&stgcrg 2>;
+ clock-names = "usb_125m", "usb0_app_125", "usb0_lpm",
+ "usb0_stb", "usb0_apb", "usb0_axi", "usb0_utmi_apb";
+ resets = <&stgcrg 10>,
+ <&stgcrg 8>,
+ <&stgcrg 7>,
+ <&stgcrg 9>;
+ starfive,stg-syscon = <&stg_syscon 0x4 0xc4 0x148 0x1f4>;
+ starfive,sys-syscon = <&sys_syscon 0x18>;
+ dr_mode = "host";
+ #phy-cells = <0>;
+ };
--
2.17.1
On Mon, 06 Mar 2023 17:52:57 +0800, Minda Chen wrote:
> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
> USB controller is cadence USB 3.0 IP.
>
> Signed-off-by: Minda Chen <[email protected]>
> ---
> .../bindings/phy/starfive,jh7110-usb-phy.yaml | 116 ++++++++++++++++++
> 1 file changed, 116 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:30:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:40:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: [error] syntax error: mapping values are not allowed here (syntax)
dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts'
Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 2023/3/6 20:25, Rob Herring wrote:
>
> On Mon, 06 Mar 2023 17:52:57 +0800, Minda Chen wrote:
>> Add StarFive JH7110 SoC USB 3.0 phy dt-binding.
>> USB controller is cadence USB 3.0 IP.
>>
>> Signed-off-by: Minda Chen <[email protected]>
>> ---
>> .../bindings/phy/starfive,jh7110-usb-phy.yaml | 116 ++++++++++++++++++
>> 1 file changed, 116 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:30:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:40:8: [warning] wrong indentation: expected 6 but found 7 (indentation)
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: [error] syntax error: mapping values are not allowed here (syntax)
>
> dtschema/dtc warnings/errors:
> make[1]: *** Deleting file 'Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts'
> Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
> make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.example.dts] Error 1
> make[1]: *** Waiting for unfinished jobs....
> ./Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml:57:12: mapping values are not allowed in this context
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml: ignoring, error parsing file
> make: *** [Makefile:1512: dt_binding_check] Error 2
>
> doc reference errors (make refcheckdocs):
>
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
Thanks! I will fix this issue in patch v2.