Add board compatible for QRD8550 - a mobile-like development board with
SM8550.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 8b90b8d7e858..b1c6f0ad8c36 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -903,6 +903,7 @@ properties:
- items:
- enum:
- qcom,sm8550-mtp
+ - qcom,sm8550-qrd
- const: qcom,sm8550
# Board compatibles go above
--
2.34.1
Add a minimal DTS for the new QRD8550 board - a mobile-like development
board with SM8550. Serial, UFS and USB should be working.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
UFS should be working the same as on MTP8550, but both fail on next and
patches from lists are needed (same as on MTP8550).
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 439 ++++++++++++++++++++++++
2 files changed, 440 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8550-qrd.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 359e428e49b3..29d5bb0403de 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -197,3 +197,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
new file mode 100644
index 000000000000..d5a645ee2a61
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -0,0 +1,439 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Linaro Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8550.dtsi"
+#include "pm8010.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+#include "pmr735d.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. SM8550 QRD";
+ compatible = "qcom,sm8550-qrd", "qcom,sm8550";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l11-supply = <&vreg_s4g_1p25>;
+ vdd-l12-supply = <&vreg_s6g_1p86>;
+ vdd-l15-supply = <&vreg_s6g_1p86>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s4g_1p25>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l3c_0p9: ldo3 {
+ regulator-name = "vreg_l3c_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /* ldo2 supplies SM8550 VDD_LPI_MX */
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+
+ vreg_s4e_0p95: smps4 {
+ regulator-name = "vreg_s4e_0p95";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5e_1p08: smps5 {
+ regulator-name = "vreg_s5e_1p08";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1e_0p88: ldo1 {
+ regulator-name = "vreg_l1e_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2e_0p9: ldo2 {
+ regulator-name = "vreg_l2e_0p9";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s4f_0p5: smps4 {
+ regulator-name = "vreg_s4f_0p5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1f_0p9: ldo1 {
+ regulator-name = "vreg_l1f_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_0p88: ldo2 {
+ regulator-name = "vreg_l2f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_0p88: ldo3 {
+ regulator-name = "vreg_l3f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ vdd-l1-supply = <&vreg_s4g_1p25>;
+ vdd-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ vreg_s1g_1p25: smps1 {
+ regulator-name = "vreg_s1g_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2g_0p85: smps2 {
+ regulator-name = "vreg_s2g_0p85";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3g_0p8: smps3 {
+ regulator-name = "vreg_s3g_0p8";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4g_1p25: smps4 {
+ regulator-name = "vreg_s4g_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5g_0p85: smps5 {
+ regulator-name = "vreg_s5g_0p85";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6g_1p86: smps6 {
+ regulator-name = "vreg_s6g_1p86";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1g_1p2: ldo1 {
+ regulator-name = "vreg_l1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_1p2: ldo3 {
+ regulator-name = "vreg_l3g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8550/adsp.mbn",
+ "qcom/sm8550/adsp_dtb.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8550/cdsp.mbn",
+ "qcom/sm8550/cdsp_dtb.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8550/modem.mbn",
+ "qcom/sm8550/modem_dtb.mbn";
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&tlmm {
+ gpio-reserved-ranges = <32 8>;
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1g_1p2>;
+ vccq-max-microamp = <1200000>;
+ vccq2-supply = <&vreg_l3g_1p2>;
+ vccq2-max-microamp = <100>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l1e_0p88>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3f_0p88>;
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.34.1
On 23-02-10 17:38:43, Krzysztof Kozlowski wrote:
> Add board compatible for QRD8550 - a mobile-like development board with
> SM8550.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 8b90b8d7e858..b1c6f0ad8c36 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -903,6 +903,7 @@ properties:
> - items:
> - enum:
> - qcom,sm8550-mtp
> + - qcom,sm8550-qrd
> - const: qcom,sm8550
>
> # Board compatibles go above
> --
> 2.34.1
>
On 23-02-10 17:38:44, Krzysztof Kozlowski wrote:
> Add a minimal DTS for the new QRD8550 board - a mobile-like development
> board with SM8550. Serial, UFS and USB should be working.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
>
> ---
>
> UFS should be working the same as on MTP8550, but both fail on next and
> patches from lists are needed (same as on MTP8550).
I believe it should be working fine on next-20230210, since both the
HC and the PHY drivers updates have been merged.
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/sm8550-qrd.dts | 439 ++++++++++++++++++++++++
> 2 files changed, 440 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8550-qrd.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 359e428e49b3..29d5bb0403de 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -197,3 +197,4 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8450-qrd.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx223.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8450-sony-xperia-nagara-pdx224.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8550-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm8550-qrd.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> new file mode 100644
> index 000000000000..d5a645ee2a61
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
> @@ -0,0 +1,439 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Linaro Limited
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include "sm8550.dtsi"
> +#include "pm8010.dtsi"
> +#include "pm8550.dtsi"
> +#include "pm8550b.dtsi"
> +#include "pm8550ve.dtsi"
> +#include "pm8550vs.dtsi"
> +#include "pmk8550.dtsi"
> +#include "pmr735d.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. SM8550 QRD";
> + compatible = "qcom,sm8550-qrd", "qcom,sm8550";
> +
> + aliases {
> + serial0 = &uart7;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + compatible = "qcom,pm8550-rpmh-regulators";
> + qcom,pmic-id = "b";
> +
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
> + vdd-l2-l13-l14-supply = <&vreg_bob1>;
> + vdd-l3-supply = <&vreg_s4g_1p25>;
> + vdd-l5-l16-supply = <&vreg_bob1>;
> + vdd-l6-l7-supply = <&vreg_bob1>;
> + vdd-l8-l9-supply = <&vreg_bob1>;
> + vdd-l11-supply = <&vreg_s4g_1p25>;
> + vdd-l12-supply = <&vreg_s6g_1p86>;
> + vdd-l15-supply = <&vreg_s6g_1p86>;
> + vdd-l17-supply = <&vreg_bob2>;
> +
> + vreg_bob1: bob1 {
> + regulator-name = "vreg_bob1";
> + regulator-min-microvolt = <3296000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_bob2: bob2 {
> + regulator-name = "vreg_bob2";
> + regulator-min-microvolt = <2720000>;
> + regulator-max-microvolt = <3960000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1b_1p8: ldo1 {
> + regulator-name = "vreg_l1b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2b_3p0: ldo2 {
> + regulator-name = "vreg_l2b_3p0";
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l5b_3p1: ldo5 {
> + regulator-name = "vreg_l5b_3p1";
> + regulator-min-microvolt = <3104000>;
> + regulator-max-microvolt = <3104000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l6b_1p8: ldo6 {
> + regulator-name = "vreg_l6b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l7b_1p8: ldo7 {
> + regulator-name = "vreg_l7b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l8b_1p8: ldo8 {
> + regulator-name = "vreg_l8b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l9b_2p9: ldo9 {
> + regulator-name = "vreg_l9b_2p9";
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <3008000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l11b_1p2: ldo11 {
> + regulator-name = "vreg_l11b_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l12b_1p8: ldo12 {
> + regulator-name = "vreg_l12b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l13b_3p0: ldo13 {
> + regulator-name = "vreg_l13b_3p0";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l14b_3p2: ldo14 {
> + regulator-name = "vreg_l14b_3p2";
> + regulator-min-microvolt = <3200000>;
> + regulator-max-microvolt = <3200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l15b_1p8: ldo15 {
> + regulator-name = "vreg_l15b_1p8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l16b_2p8: ldo16 {
> + regulator-name = "vreg_l16b_2p8";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l17b_2p5: ldo17 {
> + regulator-name = "vreg_l17b_2p5";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-1 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vdd-l1-supply = <&vreg_s4g_1p25>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4e_0p95>;
> +
> + vreg_l3c_0p9: ldo3 {
> + regulator-name = "vreg_l3c_0p9";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-2 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "d";
> +
> + vdd-l1-supply = <&vreg_s4e_0p95>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4e_0p95>;
> +
> + vreg_l1d_0p88: ldo1 {
> + regulator-name = "vreg_l1d_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <920000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + /* ldo2 supplies SM8550 VDD_LPI_MX */
> + };
> +
> + regulators-3 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "e";
> +
> + vdd-l1-supply = <&vreg_s4e_0p95>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4g_1p25>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> +
> + vreg_s4e_0p95: smps4 {
> + regulator-name = "vreg_s4e_0p95";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <984000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5e_1p08: smps5 {
> + regulator-name = "vreg_s5e_1p08";
> + regulator-min-microvolt = <1080000>;
> + regulator-max-microvolt = <1120000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1e_0p88: ldo1 {
> + regulator-name = "vreg_l1e_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2e_0p9: ldo2 {
> + regulator-name = "vreg_l2e_0p9";
> + regulator-min-microvolt = <904000>;
> + regulator-max-microvolt = <970000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3e_1p2: ldo3 {
> + regulator-name = "vreg_l3e_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-4 {
> + compatible = "qcom,pm8550ve-rpmh-regulators";
> + qcom,pmic-id = "f";
> +
> + vdd-l1-supply = <&vreg_s4e_0p95>;
> + vdd-l2-supply = <&vreg_s4e_0p95>;
> + vdd-l3-supply = <&vreg_s4e_0p95>;
> + vdd-s4-supply = <&vph_pwr>;
> +
> + vreg_s4f_0p5: smps4 {
> + regulator-name = "vreg_s4f_0p5";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <700000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1f_0p9: ldo1 {
> + regulator-name = "vreg_l1f_0p9";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l2f_0p88: ldo2 {
> + regulator-name = "vreg_l2f_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3f_0p88: ldo3 {
> + regulator-name = "vreg_l3f_0p88";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +
> + regulators-5 {
> + compatible = "qcom,pm8550vs-rpmh-regulators";
> + qcom,pmic-id = "g";
> +
> + vdd-l1-supply = <&vreg_s4g_1p25>;
> + vdd-l2-supply = <&vreg_s4g_1p25>;
> + vdd-l3-supply = <&vreg_s4g_1p25>;
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> +
> + vreg_s1g_1p25: smps1 {
> + regulator-name = "vreg_s1g_1p25";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s2g_0p85: smps2 {
> + regulator-name = "vreg_s2g_0p85";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s3g_0p8: smps3 {
> + regulator-name = "vreg_s3g_0p8";
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1004000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s4g_1p25: smps4 {
> + regulator-name = "vreg_s4g_1p25";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1352000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s5g_0p85: smps5 {
> + regulator-name = "vreg_s5g_0p85";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1004000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_s6g_1p86: smps6 {
> + regulator-name = "vreg_s6g_1p86";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l1g_1p2: ldo1 {
> + regulator-name = "vreg_l1g_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3g_1p2: ldo3 {
> + regulator-name = "vreg_l3g_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
> +};
> +
> +&qupv3_id_0 {
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + firmware-name = "qcom/sm8550/adsp.mbn",
> + "qcom/sm8550/adsp_dtb.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> + firmware-name = "qcom/sm8550/cdsp.mbn",
> + "qcom/sm8550/cdsp_dtb.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_mpss {
> + firmware-name = "qcom/sm8550/modem.mbn",
> + "qcom/sm8550/modem_dtb.mbn";
> + status = "okay";
> +};
> +
> +&sleep_clk {
> + clock-frequency = <32000>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <32 8>;
> +};
> +
> +&uart7 {
> + status = "okay";
> +};
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> + vcc-supply = <&vreg_l17b_2p5>;
> + vcc-max-microamp = <1300000>;
> + vccq-supply = <&vreg_l1g_1p2>;
> + vccq-max-microamp = <1200000>;
> + vccq2-supply = <&vreg_l3g_1p2>;
> + vccq2-max-microamp = <100>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l1d_0p88>;
> + vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + vdd-supply = <&vreg_l1e_0p88>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> + vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-pll-supply = <&vreg_l3f_0p88>;
> +
> + status = "okay";
> +};
> +
> +&xo_board {
> + clock-frequency = <76800000>;
> +};
> --
> 2.34.1
>
On 10.02.2023 17:38, Krzysztof Kozlowski wrote:
> Add a minimal DTS for the new QRD8550 board - a mobile-like development
> board with SM8550. Serial, UFS and USB should be working.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>
> ---
>
[...]
> +
> + vreg_l17b_2p5: ldo17 {
> + regulator-name = "vreg_l17b_2p5";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
[...]
> + };
> +
> + vreg_l1g_1p2: ldo1 {
> + regulator-name = "vreg_l1g_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> +
> + vreg_l3g_1p2: ldo3 {
> + regulator-name = "vreg_l3g_1p2";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + };
> + };
[...]
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
> + vcc-supply = <&vreg_l17b_2p5>;
> + vcc-max-microamp = <1300000>;
> + vccq-supply = <&vreg_l1g_1p2>;
> + vccq-max-microamp = <1200000>;
> + vccq2-supply = <&vreg_l3g_1p2>;
None of these regulators have allowed-modes + allow-set-load,
I think you may want that.
With or without that:
Reviewed-by: Konrad Dybcio <[email protected]>
Konrad
> + vccq2-max-microamp = <100>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l1d_0p88>;
> + vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + vdd-supply = <&vreg_l1e_0p88>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> + vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-pll-supply = <&vreg_l3f_0p88>;
> +
> + status = "okay";
> +};
> +
> +&xo_board {
> + clock-frequency = <76800000>;
> +};
On 13/02/2023 12:14, Konrad Dybcio wrote:
>
>
> On 10.02.2023 17:38, Krzysztof Kozlowski wrote:
>> Add a minimal DTS for the new QRD8550 board - a mobile-like development
>> board with SM8550. Serial, UFS and USB should be working.
>>
>> Signed-off-by: Krzysztof Kozlowski <[email protected]>
>>
>> ---
>>
> [...]
>> +
>> + vreg_l17b_2p5: ldo17 {
>> + regulator-name = "vreg_l17b_2p5";
>> + regulator-min-microvolt = <2504000>;
>> + regulator-max-microvolt = <2504000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>
> [...]
>
>> + };
>> +
>> + vreg_l1g_1p2: ldo1 {
>> + regulator-name = "vreg_l1g_1p2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> +
>> + vreg_l3g_1p2: ldo3 {
>> + regulator-name = "vreg_l3g_1p2";
>> + regulator-min-microvolt = <1200000>;
>> + regulator-max-microvolt = <1200000>;
>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
>> + };
>> + };
>
> [...]
>
>> +
>> +&ufs_mem_hc {
>> + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
>> + vcc-supply = <&vreg_l17b_2p5>;
>> + vcc-max-microamp = <1300000>;
>> + vccq-supply = <&vreg_l1g_1p2>;
>> + vccq-max-microamp = <1200000>;
>> + vccq2-supply = <&vreg_l3g_1p2>;
> None of these regulators have allowed-modes + allow-set-load,
> I think you may want that.
>
> With or without that:
>
> Reviewed-by: Konrad Dybcio <[email protected]>
It's something to fix also for SM8550 MTP.
Best regards,
Krzysztof
On Fri, 10 Feb 2023 17:38:43 +0100, Krzysztof Kozlowski wrote:
> Add board compatible for QRD8550 - a mobile-like development board with
> SM8550.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <[email protected]>
On Fri, 10 Feb 2023 17:38:43 +0100, Krzysztof Kozlowski wrote:
> Add board compatible for QRD8550 - a mobile-like development board with
> SM8550.
>
>
Applied, thanks!
[2/2] arm64: dts: qcom: sm8550-qrd: add QRD8550
commit: d228efe884692742e3a614c2386ee006aeb6551d
Best regards,
--
Bjorn Andersson <[email protected]>