v1 -> v2:
- Reword CPUCP L3 commits to indicate that CPUCP != the L3 scaler within
- Pick up tags
- Drop the MPM introduction as we work on resolving RPM MSG RAM bindings
v1: https://lore.kernel.org/r/[email protected]
Hello
This series brings support for a couple of nice things on SM6375, namely:
* 2 TSENS controllers & associated thermal-zones
* RPM sleep stats
* IMEM
* WCN3990 Wi-Fi (Bluetooth doesn't wanna play ball yet)
* MPSS & RMTFS
* L3 scaling interconnect (not yet hooked up in this series, but it works,
still assessing the best scaling configuration)
* MPM (big!; also implicitly fixes some interrupt lanes due to my earlier
misunderstanding of the downstream MPM<->GIC mapping)
* Additional CPU sleep state (gated clock, power rail still on)
* V- key on the Xperia
It does *not* bring support for GPU, MDSS, icc and various other scaling
parts which are still in progress of being upstreamed.
More PDX225-specific patches, along with Wi-Fi enablement will come after
that. But hey, we already know it works great ;)
Tested on the only sm6375 device we support, the Xperia 10 IV (PDX225).
Depends on:
https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Konrad Dybcio <[email protected]>
---
Konrad Dybcio (14):
dt-bindings: thermal: qcom-tsens: Add compatible for SM6375
dt-bindings: interconnect: OSM L3: Add SM6375 CPUCP compatible
dt-bindings: sram: qcom,imem: document SM6375 IMEM
arm64: dts: qcom: sm6375: Add RPM sleep stats
arm64: dts: qcom: sm6375: Add IMEM
arm64: dts: qcom: sm6375: Add RMTFS
arm64: dts: qcom: sm6375: Add wifi node
arm64: dts: qcom: sm6375: Add modem nodes
arm64: dts: qcom: sm6375: Add CPUCP L3 node
arm64: dts: qcom: sm6375: Add TSENS
arm64: dts: qcom: sm6375: Configure TSENS thermal zones
arm64: dts: qcom: sm6375: Bump CPU rail power collapse index
arm64: dts: qcom: sm6375: Introduce C3 power state for both ARM clusters
arm64: dts: qcom: sm6375-pdx225: Add volume down GPIO key
.../bindings/interconnect/qcom,osm-l3.yaml | 1 +
.../devicetree/bindings/sram/qcom,imem.yaml | 1 +
.../devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
.../dts/qcom/sm6375-sony-xperia-murray-pdx225.dts | 27 +
arch/arm64/boot/dts/qcom/sm6375.dtsi | 904 ++++++++++++++++++++-
5 files changed, 926 insertions(+), 8 deletions(-)
---
base-commit: 1acf39ef8f1425cd105f630dc2c7c1d8fff27ed1
change-id: 20230303-topic-sm6375_features0_dts-860904f318d8
Best regards,
--
Konrad Dybcio <[email protected]>
The Qualcomm SM6375 platform has two instances of the tsens v2.8.0 block,
add a compatible for these instances.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 926e9c51c93c..d73b72dafcbc 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -56,6 +56,7 @@ properties:
- qcom,sdm845-tsens
- qcom,sm6115-tsens
- qcom,sm6350-tsens
+ - qcom,sm6375-tsens
- qcom,sm8150-tsens
- qcom,sm8250-tsens
- qcom,sm8350-tsens
--
2.39.2
SM6375 includes a CPUCP block responsible for managing different APSS-
related tasks, such as scaling the voltage and frequency of the
components within the ARM DSU cluster. Add a compatible for the L3 cache
DVFS scaler within.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
index 576992a6dc5a..9d0a98d77ae9 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,osm-l3.yaml
@@ -29,6 +29,7 @@ properties:
- enum:
- qcom,sc7280-epss-l3
- qcom,sc8280xp-epss-l3
+ - qcom,sm6375-cpucp-l3
- qcom,sm8250-epss-l3
- qcom,sm8350-epss-l3
- const: qcom,epss-l3
--
2.39.2
Add a compatible for SM6375 IMEM.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
Documentation/devicetree/bindings/sram/qcom,imem.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/sram/qcom,imem.yaml b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
index ba694ce4a037..0548e8e0d30b 100644
--- a/Documentation/devicetree/bindings/sram/qcom,imem.yaml
+++ b/Documentation/devicetree/bindings/sram/qcom,imem.yaml
@@ -26,6 +26,7 @@ properties:
- qcom,sdm845-imem
- qcom,sdx55-imem
- qcom,sdx65-imem
+ - qcom,sm6375-imem
- qcom,sm8450-imem
- const: syscon
- const: simple-mfd
--
2.39.2
Add a node for RPM sleep stats to enable sleep monitoring.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 31b88c738510..de5882c0ff81 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -718,6 +718,11 @@ rpm_msg_ram: sram@45f0000 {
reg = <0 0x045f0000 0 0x7000>;
};
+ sram@4690000 {
+ compatible = "qcom,rpm-stats";
+ reg = <0 0x04690000 0 0x400>;
+ };
+
sdhc_2: mmc@4784000 {
compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x04784000 0 0x1000>;
--
2.39.2
Add a node for the IMEM block on SM6375.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index de5882c0ff81..5a0abb7f7124 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1233,6 +1233,20 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
};
};
+ sram@c125000 {
+ compatible = "qcom,sm6375-imem", "syscon", "simple-mfd";
+ reg = <0 0x0c125000 0 0x1000>;
+ ranges = <0 0 0x0c125000 0x1000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pil-reloc@94c {
+ compatible = "qcom,pil-reloc-info";
+ reg = <0x94c 0xc8>;
+ };
+ };
+
apps_smmu: iommu@c600000 {
compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
reg = <0 0x0c600000 0 0x100000>;
--
2.39.2
Add a node for RMTFS on SM6375.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 5a0abb7f7124..2cdd000a4e2b 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -6,6 +6,7 @@
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/clock/qcom,sm6375-gcc.h>
#include <dt-bindings/dma/qcom-gpi.h>
+#include <dt-bindings/firmware/qcom,scm.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -424,6 +425,15 @@ removed_mem: removed@c0000000 {
no-map;
};
+ rmtfs_mem: rmtfs@f3900000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf3900000 0 0x280000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
+ };
+
debug_mem: debug@ffb00000 {
reg = <0 0xffb00000 0 0xc0000>;
no-map;
--
2.39.2
Add a node for ATH10K_SNoC wifi on SM6375.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 2cdd000a4e2b..e473a90f3dea 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1333,6 +1333,28 @@ apps_smmu: iommu@c600000 {
#iommu-cells = <2>;
};
+ wifi: wifi@c800000 {
+ compatible = "qcom,wcn3990-wifi";
+ reg = <0 0x0c800000 0 0x800000>;
+ reg-names = "membase";
+ memory-region = <&pil_wlan_mem>;
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&apps_smmu 0x80 0x1>;
+ qcom,msa-fixed-perm;
+ status = "disabled";
+ };
+
intc: interrupt-controller@f200000 {
compatible = "arm,gic-v3";
reg = <0x0 0x0f200000 0x0 0x10000>, /* GICD */
--
2.39.2
Add required nodes to make the embedded 5G modem boot up on SM6375.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 82 ++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e473a90f3dea..90f18754a63b 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -565,6 +565,47 @@ smp2p_cdsp_in: slave-kernel {
};
};
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
+
+ smp2p_modem_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_modem_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ ipa_smp2p_out: ipa-ap-to-modem {
+ qcom,entry-name = "ipa";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ ipa_smp2p_in: ipa-modem-to-ap {
+ qcom,entry-name = "ipa";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wlan_smp2p_in: wlan-wpss-to-ap {
+ qcom,entry-name = "wlan";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
soc: soc@0 {
#address-cells = <2>;
#size-cells = <2>;
@@ -1170,6 +1211,47 @@ usb_1_dwc3: usb@4e00000 {
};
};
+ remoteproc_mss: remoteproc@6000000 {
+ compatible = "qcom,sm6375-mpss-pas";
+ reg = <0 0x06000000 0 0x4040>;
+
+ interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "xo";
+
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ power-domain-names = "cx";
+
+ memory-region = <&pil_mpss_wlan_mem>;
+
+ qcom,smem-states = <&smp2p_modem_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_MPSS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ label = "modem";
+ qcom,remote-pid = <1>;
+ };
+ };
+
remoteproc_adsp: remoteproc@a400000 {
compatible = "qcom,sm6375-adsp-pas";
reg = <0 0x0a400000 0 0x100>;
--
2.39.2
Add nodes for the two TSENS v2.8.0 controllers present on the SoC.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 59d7ed25aa36..a88ed6467e68 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -764,6 +764,28 @@ spmi_bus: spmi@1c40000 {
#interrupt-cells = <4>;
};
+ tsens0: thermal-sensor@4411000 {
+ compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+ reg = <0 0x04411000 0 0x140>, /* TM */
+ <0 0x04410000 0 0x20>; /* SROT */
+ interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ #qcom,sensors = <15>;
+ };
+
+ tsens1: thermal-sensor@4413000 {
+ compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
+ reg = <0 0x04413000 0 0x140>, /* TM */
+ <0 0x04412000 0 0x20>; /* SROT */
+ interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ #qcom,sensors = <11>;
+ };
+
rpm_msg_ram: sram@45f0000 {
compatible = "qcom,rpm-msg-ram";
reg = <0 0x045f0000 0 0x7000>;
--
2.39.2
Configure the L3 cache DVFS scaler within the CPUCP block to allow
for dynamic frequency switching.
Reviewed-by: Sibi Sankar <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 90f18754a63b..59d7ed25aa36 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1505,6 +1505,15 @@ frame@f42d000 {
};
};
+ cpucp_l3: interconnect@fd90000 {
+ compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3";
+ reg = <0 0x0fd90000 0 0x1000>;
+
+ clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
+ clock-names = "xo", "alternate";
+ #interconnect-cells = <1>;
+ };
+
cpufreq_hw: cpufreq@fd91000 {
compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
--
2.39.2
In preparation for supporting a less-deep sleep state, rename the
existing rail power off from _0 to _1.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 94bb373f8d97..d9b8c8b921be 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -207,7 +207,7 @@ core7 {
idle-states {
entry-method = "psci";
- LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "silver-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
@@ -217,7 +217,7 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
local-timer-stop;
};
- BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "gold-rail-power-collapse";
arm,psci-suspend-param = <0x40000004>;
@@ -268,49 +268,49 @@ psci {
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
};
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
};
CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
};
CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
};
CPU_PD4: power-domain-cpu4 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
};
CPU_PD5: power-domain-cpu5 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
};
CPU_PD6: power-domain-cpu6 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ domain-idle-states = <&BIG_CPU_SLEEP_1>;
};
CPU_PD7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
+ domain-idle-states = <&BIG_CPU_SLEEP_1>;
};
CLUSTER_PD: power-domain-cpu-cluster0 {
--
2.39.2
Introduce the C3 power state, which - to the best of my understanding -
gates the CPU clock, but does not shut off the power rail.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 36 ++++++++++++++++++++++++++++--------
1 file changed, 28 insertions(+), 8 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index d9b8c8b921be..bab64034a8d5 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -207,6 +207,16 @@ core7 {
idle-states {
entry-method = "psci";
+ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "silver-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <549>;
+ exit-latency-us = <901>;
+ min-residency-us = <1774>;
+ local-timer-stop;
+ };
+
LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
compatible = "arm,idle-state";
idle-state-name = "silver-rail-power-collapse";
@@ -217,6 +227,16 @@ LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
local-timer-stop;
};
+ BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+ compatible = "arm,idle-state";
+ idle-state-name = "gold-power-collapse";
+ arm,psci-suspend-param = <0x40000003>;
+ entry-latency-us = <523>;
+ exit-latency-us = <1244>;
+ min-residency-us = <2207>;
+ local-timer-stop;
+ };
+
BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
compatible = "arm,idle-state";
idle-state-name = "gold-rail-power-collapse";
@@ -268,49 +288,49 @@ psci {
CPU_PD0: power-domain-cpu0 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
};
CPU_PD1: power-domain-cpu1 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
};
CPU_PD2: power-domain-cpu2 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
};
CPU_PD3: power-domain-cpu3 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
};
CPU_PD4: power-domain-cpu4 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
};
CPU_PD5: power-domain-cpu5 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_1>;
+ domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
};
CPU_PD6: power-domain-cpu6 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_1>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
};
CPU_PD7: power-domain-cpu7 {
#power-domain-cells = <0>;
power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_1>;
+ domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
};
CLUSTER_PD: power-domain-cpu-cluster0 {
--
2.39.2
Add the required nodes to enable the volume down key on the Sony
Xperia 10 IV.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/sm6375-sony-xperia-murray-pdx225.dts | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
index b691c3834b6b..8220e6f44117 100644
--- a/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
+++ b/arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts
@@ -46,6 +46,23 @@ framebuffer: framebuffer@85200000 {
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ label = "gpio-keys";
+
+ pinctrl-0 = <&vol_down_n>;
+ pinctrl-names = "default";
+
+ key-volume-down {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
reserved-memory {
cont_splash_mem: memory@85200000 {
reg = <0 0x85200000 0 0xc00000>;
@@ -133,6 +150,16 @@ &pmk8350_rtc {
status = "okay";
};
+&pmr735a_gpios {
+ vol_down_n: vol-down-n-state {
+ pins = "gpio1";
+ function = "normal";
+ power-source = <1>;
+ bias-pull-up;
+ input-enable;
+ };
+};
+
&pon_pwrkey {
status = "okay";
};
--
2.39.2
Add a thermal zones configuration for all 15+11 TSENS sensors.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 704 +++++++++++++++++++++++++++++++++++
1 file changed, 704 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index a88ed6467e68..94bb373f8d97 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -1550,6 +1550,710 @@ cpufreq_hw: cpufreq@fd91000 {
};
};
+ thermal-zones {
+ mapss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ mapss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mapss0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mapss0_crit: mapss-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ cpu0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu0_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ cpu1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu2-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ cpu2_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu2_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ cpu3_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu3_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu4-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ cpu4_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu4_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu5-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ cpu5_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu5_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cluster0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster0_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cluster1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cluster1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cluster1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu6-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ cpu6_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu6_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu7-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu7_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu7_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-unk0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ cpu_unk0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_unk0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_unk0_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-unk1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cpu_unk1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_unk1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_unk1_crit: cpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ gpuss0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpuss0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpuss0_crit: gpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ gpuss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpuss1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ gpuss1_crit: gpu-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mapss1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ mapss1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mapss1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mapss1_crit: mapss-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ cwlan-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ cwlan_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cwlan_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cwlan_crit: cwlan-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ audio-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ audio_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ audio_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ audio_crit: audio-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ ddr_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ddr_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ ddr_crit: ddr-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ q6hvx-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ q6hvx_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ q6hvx_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ q6hvx_crit: q6hvx-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ camera_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ camera_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ camera_crit: camera-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdm-core0-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ mdm_core0_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mdm_core0_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mdm_core0_crit: mdm-core0-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdm-core1-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ mdm_core1_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mdm_core1_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mdm_core1_crit: mdm-core1-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ mdm-vec-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 8>;
+
+ trips {
+ mdm_vec_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mdm_vec_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ mdm_vec_crit: mdm-vec-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ msm-scl-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 9>;
+
+ trips {
+ msm_scl_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ msm_scl_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ msm_scl_crit: msm-scl-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&tsens1 10>;
+
+ trips {
+ video_alert0: trip-point0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ video_alert1: trip-point1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ video_crit: video-crit {
+ temperature = <110000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
--
2.39.2
On Thu, 16 Mar 2023 15:12:49 +0100, Konrad Dybcio wrote:
> v1 -> v2:
> - Reword CPUCP L3 commits to indicate that CPUCP != the L3 scaler within
> - Pick up tags
> - Drop the MPM introduction as we work on resolving RPM MSG RAM bindings
>
> v1: https://lore.kernel.org/r/[email protected]
>
> [...]
Applied, thanks!
[04/14] arm64: dts: qcom: sm6375: Add RPM sleep stats
commit: 2cecb9c2419f78e939e6e902895591ce3e3a7cc7
[05/14] arm64: dts: qcom: sm6375: Add IMEM
commit: 528630df2fa6d34eca0268a293fe354c71e48556
[06/14] arm64: dts: qcom: sm6375: Add RMTFS
(no commit info)
[07/14] arm64: dts: qcom: sm6375: Add wifi node
commit: 149d179d1408bc67b6af10af160ac13b48fa3399
[08/14] arm64: dts: qcom: sm6375: Add modem nodes
commit: 31cc61104f6894f686491dbbb5c8ece97b06e75d
[09/14] arm64: dts: qcom: sm6375: Add CPUCP L3 node
commit: 2f51d9231485250c0e4cf4d7326c30109c553382
[10/14] arm64: dts: qcom: sm6375: Add TSENS
commit: 3f54391526b407a419d2dfd4055fdc9e6e223551
[11/14] arm64: dts: qcom: sm6375: Configure TSENS thermal zones
commit: 33555cdae863984c7840ba742cfffe839a0f71e4
[12/14] arm64: dts: qcom: sm6375: Bump CPU rail power collapse index
commit: 097d6525af378f4be768c05cc1d77183a4e742e3
[13/14] arm64: dts: qcom: sm6375: Introduce C3 power state for both ARM clusters
commit: dbe38b9cba6d0de56ca186151f3f54f9c776f9d9
[14/14] arm64: dts: qcom: sm6375-pdx225: Add volume down GPIO key
commit: 795ee50e55f4e869ad1d56f0262d0baa401f6c3d
Best regards,
--
Bjorn Andersson <[email protected]>
On 16.03.2023 15:12, Konrad Dybcio wrote:
> The Qualcomm SM6375 platform has two instances of the tsens v2.8.0 block,
> add a compatible for these instances.
>
> Acked-by: Krzysztof Kozlowski <[email protected]>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
<bump>
This one got lost!
Konrad
> Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index 926e9c51c93c..d73b72dafcbc 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -56,6 +56,7 @@ properties:
> - qcom,sdm845-tsens
> - qcom,sm6115-tsens
> - qcom,sm6350-tsens
> + - qcom,sm6375-tsens
> - qcom,sm8150-tsens
> - qcom,sm8250-tsens
> - qcom,sm8350-tsens
>