This patch series introduces OF overlay support for PCI devices which
primarily addresses two use cases. First, it provides a data driven method
to describe hardware peripherals that are present in a PCI endpoint and
hence can be accessed by the PCI host. Second, it allows reuse of a OF
compatible driver -- often used in SoC platforms -- in a PCI host based
system.
There are 2 series devices rely on this patch:
1) Xilinx Alveo Accelerator cards (FPGA based device)
2) Microchip LAN9662 Ethernet Controller
Please see: https://lore.kernel.org/lkml/[email protected]/
Normally, the PCI core discovers PCI devices and their BARs using the
PCI enumeration process. However, the process does not provide a way to
discover the hardware peripherals that are present in a PCI device, and
which can be accessed through the PCI BARs. Also, the enumeration process
does not provide a way to associate MSI-X vectors of a PCI device with the
hardware peripherals that are present in the device. PCI device drivers
often use header files to describe the hardware peripherals and their
resources as there is no standard data driven way to do so. This patch
series proposes to use flattened device tree blob to describe the
peripherals in a data driven way. Based on previous discussion, using
device tree overlay is the best way to unflatten the blob and populate
platform devices. To use device tree overlay, there are three obvious
problems that need to be resolved.
First, we need to create a base tree for non-DT system such as x86_64. A
patch series has been submitted for this:
https://lore.kernel.org/lkml/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
Second, a device tree node corresponding to the PCI endpoint is required
for overlaying the flattened device tree blob for that PCI endpoint.
Because PCI is a self-discoverable bus, a device tree node is usually not
created for PCI devices. This series adds support to generate a device
tree node for a PCI device which advertises itself using PCI quirks
infrastructure.
Third, we need to generate device tree nodes for PCI bridges since a child
PCI endpoint may choose to have a device tree node created.
This patch series is made up of three patches.
The first patch is adding OF interface to create or destroy OF node
dynamically.
The second patch introduces a kernel option, CONFIG_DYNAMIC_PCI_OF_NODEX.
When the option is turned on, the kernel will generate device tree nodes
for all PCI bridges unconditionally. The patch also shows how to use the
PCI quirks infrastructure, DECLARE_PCI_FIXUP_FINAL to generate a device
tree node for a device. Specifically, the patch generates a device tree
node for Xilinx Alveo U50 PCIe accelerator device. The generated device
tree nodes do not have any property.
The third patch adds basic properties ('reg', 'compatible' and
'device_type') to the dynamically generated device tree nodes. More
properties can be added in the future.
Here is the example of device tree nodes generated within the ARM64 QEMU.
# lspci -t
-[0000:00]-+-00.0
+-01.0
+-03.0-[01-03]----00.0-[02-03]----00.0-[03]----00.0
+-03.1-[04]--
\-04.0-[05-06]----00.0-[06]--
# tree /sys/firmware/devicetree/base/pcie\@10000000
/sys/firmware/devicetree/base/pcie@10000000
|-- #address-cells
|-- #interrupt-cells
|-- #size-cells
|-- bus-range
|-- compatible
|-- device_type
|-- dma-coherent
|-- interrupt-map
|-- interrupt-map-mask
|-- linux,pci-domain
|-- msi-map
|-- name
|-- pci@3,0
| |-- #address-cells
| |-- #size-cells
| |-- compatible
| |-- device_type
| |-- pci@0,0
| | |-- #address-cells
| | |-- #size-cells
| | |-- compatible
| | |-- device_type
| | |-- pci@0,0
| | | |-- #address-cells
| | | |-- #size-cells
| | | |-- compatible
| | | |-- dev@0,0
| | | | |-- #address-cells
| | | | |-- #size-cells
| | | | |-- compatible
| | | | |-- ranges
| | | | `-- reg
| | | |-- device_type
| | | |-- ranges
| | | `-- reg
| | |-- ranges
| | `-- reg
| |-- ranges
| `-- reg
|-- pci@3,1
| |-- #address-cells
| |-- #size-cells
| |-- compatible
| |-- device_type
| |-- ranges
| `-- reg
|-- pci@4,0
| |-- #address-cells
| |-- #size-cells
| |-- compatible
| |-- device_type
| |-- pci@0,0
| | |-- #address-cells
| | |-- #size-cells
| | |-- compatible
| | |-- device_type
| | |-- ranges
| | `-- reg
| |-- ranges
| `-- reg
|-- ranges
`-- reg
Changes since v8:
- Added patches to create unit test to verifying address translation
The test relies on QEMU PCI Test Device, please see
https://github.com/houlz0507/xoclv2/blob/pci-dt-0329/pci-dt-patch-0329/README
for test setup
- Minor code review fixes
Changes since v7:
- Modified dynamic node creation interfaces
- Added unittest for new added interfaces
Changes since v6:
- Removed single line wrapper functions
- Added Signed-off-by Clément Léger <[email protected]>
Changes since v5:
- Fixed code review comments
- Fixed incorrect 'ranges' and 'reg' properties
Changes since RFC v4:
- Fixed code review comments
Changes since RFC v3:
- Split the Xilinx Alveo U50 PCI quirk to a separate patch
- Minor changes in commit description and code comment
Changes since RFC v2:
- Merged patch 3 with patch 2
- Added OF interfaces of_changeset_add_prop_* and use them to create
properties.
- Added '#address-cells', '#size-cells' and 'ranges' properties.
Changes since RFC v1:
- Added one patch to create basic properties.
- To move DT related code out of PCI subsystem, replaced of_node_alloc()
with of_create_node()/of_destroy_node()
Lizhi Hou (6):
of: dynamic: Add interfaces for creating device node dynamically
PCI: Create device tree node for selected devices
PCI: Add PCI quirks to generate device tree node for Xilinx Alveo U50
PCI: Add ranges property for pci endpoint
of: overlay: Extend of_overlay_fdt_apply() to specify the target node
of: unittest: Add pci_dt_testdrv pci driver
drivers/of/dynamic.c | 164 ++++++++++++++
drivers/of/overlay.c | 42 +++-
drivers/of/unittest-data/Makefile | 3 +-
.../of/unittest-data/overlay_pci_node.dtso | 22 ++
drivers/of/unittest.c | 210 +++++++++++++++++-
drivers/pci/Kconfig | 12 +
drivers/pci/Makefile | 1 +
drivers/pci/bus.c | 2 +
drivers/pci/of.c | 81 ++++++-
drivers/pci/of_property.c | 190 ++++++++++++++++
drivers/pci/pci.h | 19 ++
drivers/pci/quirks.c | 12 +
drivers/pci/remove.c | 1 +
include/linux/of.h | 25 ++-
14 files changed, 768 insertions(+), 16 deletions(-)
create mode 100644 drivers/of/unittest-data/overlay_pci_node.dtso
create mode 100644 drivers/pci/of_property.c
--
2.34.1
of_changeset_create_node() creates device node dynamically and attaches
the newly created node to a changeset.
Expand of_changeset APIs to handle specific types of properties.
of_changeset_add_prop_string()
of_changeset_add_prop_string_array()
of_changeset_add_prop_u32_array()
Signed-off-by: Clément Léger <[email protected]>
Signed-off-by: Lizhi Hou <[email protected]>
---
drivers/of/dynamic.c | 164 ++++++++++++++++++++++++++++++++++++++++++
drivers/of/unittest.c | 19 ++++-
include/linux/of.h | 23 ++++++
3 files changed, 205 insertions(+), 1 deletion(-)
diff --git a/drivers/of/dynamic.c b/drivers/of/dynamic.c
index e311d406b170..9259cebda4d6 100644
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -487,6 +487,38 @@ struct device_node *__of_node_dup(const struct device_node *np,
return NULL;
}
+/**
+ * of_changeset_create_node - Dynamically create a device node and attach to
+ * a given changeset.
+ *
+ * @parent: Pointer to parent device node
+ * @full_name: Node full name
+ * @cset: Pointer to changeset
+ *
+ * Return: Pointer to the created device node or NULL in case of an error.
+ */
+struct device_node *of_changeset_create_node(struct device_node *parent,
+ const char *full_name,
+ struct of_changeset *cset)
+{
+ struct device_node *np;
+ int ret;
+
+ np = __of_node_dup(NULL, full_name);
+ if (!np)
+ return NULL;
+ np->parent = parent;
+
+ ret = of_changeset_attach_node(cset, np);
+ if (ret) {
+ of_node_put(np);
+ return NULL;
+ }
+
+ return np;
+}
+EXPORT_SYMBOL(of_changeset_create_node);
+
static void __of_changeset_entry_destroy(struct of_changeset_entry *ce)
{
if (ce->action == OF_RECONFIG_ATTACH_NODE &&
@@ -960,3 +992,135 @@ int of_changeset_action(struct of_changeset *ocs, unsigned long action,
return 0;
}
EXPORT_SYMBOL_GPL(of_changeset_action);
+
+static int of_changeset_add_prop_helper(struct of_changeset *ocs,
+ struct device_node *np,
+ const struct property *pp)
+{
+ struct property *new_pp;
+ int ret;
+
+ new_pp = __of_prop_dup(pp, GFP_KERNEL);
+ if (!new_pp)
+ return -ENOMEM;
+
+ ret = of_changeset_add_property(ocs, np, new_pp);
+ if (ret) {
+ kfree(new_pp->name);
+ kfree(new_pp->value);
+ kfree(new_pp);
+ }
+
+ return ret;
+}
+
+/**
+ * of_changeset_add_prop_string - Add a string property to a changeset
+ *
+ * @ocs: changeset pointer
+ * @np: device node pointer
+ * @prop_name: name of the property to be added
+ * @str: pointer to null terminated string
+ *
+ * Create a string property and add it to a changeset.
+ *
+ * Return: 0 on success, a negative error value in case of an error.
+ */
+int of_changeset_add_prop_string(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name, const char *str)
+{
+ struct property prop;
+
+ prop.name = (char *)prop_name;
+ prop.length = strlen(str) + 1;
+ prop.value = (void *)str;
+
+ return of_changeset_add_prop_helper(ocs, np, &prop);
+}
+EXPORT_SYMBOL_GPL(of_changeset_add_prop_string);
+
+/**
+ * of_changeset_add_prop_string_array - Add a string list property to
+ * a changeset
+ *
+ * @ocs: changeset pointer
+ * @np: device node pointer
+ * @prop_name: name of the property to be added
+ * @str_array: pointer to an array of null terminated strings
+ * @sz: number of string array elements
+ *
+ * Create a string list property and add it to a changeset.
+ *
+ * Return: 0 on success, a negative error value in case of an error.
+ */
+int of_changeset_add_prop_string_array(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name,
+ const char **str_array, size_t sz)
+{
+ struct property prop;
+ int i, ret;
+ char *vp;
+
+ prop.name = (char *)prop_name;
+
+ prop.length = 0;
+ for (i = 0; i < sz; i++)
+ prop.length += strlen(str_array[i]) + 1;
+
+ prop.value = kmalloc(prop.length, GFP_KERNEL);
+ if (!prop.value)
+ return -ENOMEM;
+
+ vp = prop.value;
+ for (i = 0; i < sz; i++) {
+ vp += snprintf(vp, (char *)prop.value + prop.length - vp, "%s",
+ str_array[i]) + 1;
+ }
+ ret = of_changeset_add_prop_helper(ocs, np, &prop);
+ kfree(prop.value);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_changeset_add_prop_string_array);
+
+/**
+ * of_changeset_add_prop_u32_array - Add a property of 32 bit integers
+ * property to a changeset
+ *
+ * @ocs: changeset pointer
+ * @np: device node pointer
+ * @prop_name: name of the property to be added
+ * @array: pointer to an array of 32 bit integers
+ * @sz: number of array elements
+ *
+ * Create a property of 32 bit integers and add it to a changeset.
+ *
+ * Return: 0 on success, a negative error value in case of an error.
+ */
+int of_changeset_add_prop_u32_array(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name,
+ const u32 *array, size_t sz)
+{
+ struct property prop;
+ __be32 *val;
+ int i, ret;
+
+ val = kcalloc(sz, sizeof(__be32), GFP_KERNEL);
+ if (!val)
+ return -ENOMEM;
+
+ for (i = 0; i < sz; i++)
+ val[i] = cpu_to_be32(array[i]);
+ prop.name = (char *)prop_name;
+ prop.length = sizeof(u32) * sz;
+ prop.value = (void *)val;
+
+ ret = of_changeset_add_prop_helper(ocs, np, &prop);
+ kfree(val);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_changeset_add_prop_u32_array);
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 2191c0136531..1193a574fa36 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -802,7 +802,9 @@ static void __init of_unittest_changeset(void)
struct property *ppname_n21, pname_n21 = { .name = "name", .length = 3, .value = "n21" };
struct property *ppupdate, pupdate = { .name = "prop-update", .length = 5, .value = "abcd" };
struct property *ppremove;
- struct device_node *n1, *n2, *n21, *nchangeset, *nremove, *parent, *np;
+ struct device_node *n1, *n2, *n21, *n22, *nchangeset, *nremove, *parent, *np;
+ static const char * const str_array[] = { "str1", "str2", "str3" };
+ const u32 u32_array[] = { 1, 2, 3 };
struct of_changeset chgset;
n1 = __of_node_dup(NULL, "n1");
@@ -857,6 +859,17 @@ static void __init of_unittest_changeset(void)
unittest(!of_changeset_add_property(&chgset, parent, ppadd), "fail add prop prop-add\n");
unittest(!of_changeset_update_property(&chgset, parent, ppupdate), "fail update prop\n");
unittest(!of_changeset_remove_property(&chgset, parent, ppremove), "fail remove prop\n");
+ n22 = of_changeset_create_node(n2, "n22", &chgset);
+ unittest(n22, "fail create n22\n");
+ unittest(!of_changeset_add_prop_string(&chgset, n22, "prop-str", "abcd"),
+ "fail add prop prop-str");
+ unittest(!of_changeset_add_prop_string_array(&chgset, n22, "prop-str-array",
+ (const char **)str_array,
+ ARRAY_SIZE(str_array)),
+ "fail add prop prop-str-array");
+ unittest(!of_changeset_add_prop_u32_array(&chgset, n22, "prop-u32-array",
+ u32_array, ARRAY_SIZE(u32_array)),
+ "fail add prop prop-u32-array");
unittest(!of_changeset_apply(&chgset), "apply failed\n");
@@ -866,6 +879,9 @@ static void __init of_unittest_changeset(void)
unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n21")),
"'%pOF' not added\n", n21);
of_node_put(np);
+ unittest((np = of_find_node_by_path("/testcase-data/changeset/n2/n22")),
+ "'%pOF' not added\n", n22);
+ of_node_put(np);
unittest(!of_changeset_revert(&chgset), "revert failed\n");
@@ -874,6 +890,7 @@ static void __init of_unittest_changeset(void)
of_node_put(n1);
of_node_put(n2);
of_node_put(n21);
+ of_node_put(n22);
#endif
}
diff --git a/include/linux/of.h b/include/linux/of.h
index 6ecde0515677..82d0a476ec75 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1580,6 +1580,29 @@ static inline int of_changeset_update_property(struct of_changeset *ocs,
{
return of_changeset_action(ocs, OF_RECONFIG_UPDATE_PROPERTY, np, prop);
}
+
+struct device_node *of_changeset_create_node(struct device_node *parent,
+ const char *full_name,
+ struct of_changeset *cset);
+int of_changeset_add_prop_string(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name, const char *str);
+int of_changeset_add_prop_string_array(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name,
+ const char **str_array, size_t sz);
+int of_changeset_add_prop_u32_array(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name,
+ const u32 *array, size_t sz);
+static inline int of_changeset_add_prop_u32(struct of_changeset *ocs,
+ struct device_node *np,
+ const char *prop_name,
+ const u32 val)
+{
+ return of_changeset_add_prop_u32_array(ocs, np, prop_name, &val, 1);
+}
+
#else /* CONFIG_OF_DYNAMIC */
static inline int of_reconfig_notifier_register(struct notifier_block *nb)
{
--
2.34.1
Currently, in an overlay fdt fragment, it needs to specify the exact
location in base DT. In another word, when the fdt fragment is generated,
the base DT location for the fragment is already known.
There is new use case that the base DT location is unknown when fdt
fragment is generated. For example, the add-on device provide a fdt
overlay with its firmware to describe its downstream devices. Because it
is add-on device which can be plugged to different systems, its firmware
will not be able to know the overlay location in base DT. Instead, the
device driver will load the overlay fdt and apply it to base DT at runtime.
In this case, of_overlay_fdt_apply() needs to be extended to specify
the target node for device driver to apply overlay fdt.
int overlay_fdt_apply(..., struct device_node *base);
Signed-off-by: Lizhi Hou <[email protected]>
---
drivers/of/overlay.c | 42 +++++++++++++++++++++++++++++++-----------
drivers/of/unittest.c | 3 ++-
include/linux/of.h | 2 +-
3 files changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/of/overlay.c b/drivers/of/overlay.c
index 7feb643f1370..6f3ae30c878d 100644
--- a/drivers/of/overlay.c
+++ b/drivers/of/overlay.c
@@ -682,9 +682,11 @@ static int build_changeset(struct overlay_changeset *ovcs)
* 1) "target" property containing the phandle of the target
* 2) "target-path" property containing the path of the target
*/
-static struct device_node *find_target(struct device_node *info_node)
+static struct device_node *find_target(struct device_node *info_node,
+ struct device_node *target_base)
{
struct device_node *node;
+ char *target_path;
const char *path;
u32 val;
int ret;
@@ -700,10 +702,23 @@ static struct device_node *find_target(struct device_node *info_node)
ret = of_property_read_string(info_node, "target-path", &path);
if (!ret) {
- node = of_find_node_by_path(path);
- if (!node)
- pr_err("find target, node: %pOF, path '%s' not found\n",
- info_node, path);
+ if (target_base) {
+ target_path = kasprintf(GFP_KERNEL, "%pOF%s", target_base, path);
+ if (!target_path)
+ return NULL;
+ node = of_find_node_by_path(target_path);
+ if (!node) {
+ pr_err("find target, node: %pOF, path '%s' not found\n",
+ info_node, target_path);
+ }
+ kfree(target_path);
+ } else {
+ node = of_find_node_by_path(path);
+ if (!node) {
+ pr_err("find target, node: %pOF, path '%s' not found\n",
+ info_node, path);
+ }
+ }
return node;
}
@@ -715,6 +730,7 @@ static struct device_node *find_target(struct device_node *info_node)
/**
* init_overlay_changeset() - initialize overlay changeset from overlay tree
* @ovcs: Overlay changeset to build
+ * @target_base: Point to the target node to apply overlay
*
* Initialize @ovcs. Populate @ovcs->fragments with node information from
* the top level of @overlay_root. The relevant top level nodes are the
@@ -725,7 +741,8 @@ static struct device_node *find_target(struct device_node *info_node)
* detected in @overlay_root. On error return, the caller of
* init_overlay_changeset() must call free_overlay_changeset().
*/
-static int init_overlay_changeset(struct overlay_changeset *ovcs)
+static int init_overlay_changeset(struct overlay_changeset *ovcs,
+ struct device_node *target_base)
{
struct device_node *node, *overlay_node;
struct fragment *fragment;
@@ -786,7 +803,7 @@ static int init_overlay_changeset(struct overlay_changeset *ovcs)
fragment = &fragments[cnt];
fragment->overlay = overlay_node;
- fragment->target = find_target(node);
+ fragment->target = find_target(node, target_base);
if (!fragment->target) {
of_node_put(fragment->overlay);
ret = -EINVAL;
@@ -877,6 +894,7 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs)
*
* of_overlay_apply() - Create and apply an overlay changeset
* @ovcs: overlay changeset
+ * @base: point to the target node to apply overlay
*
* Creates and applies an overlay changeset.
*
@@ -900,7 +918,8 @@ static void free_overlay_changeset(struct overlay_changeset *ovcs)
* the caller of of_overlay_apply() must call free_overlay_changeset().
*/
-static int of_overlay_apply(struct overlay_changeset *ovcs)
+static int of_overlay_apply(struct overlay_changeset *ovcs,
+ struct device_node *base)
{
int ret = 0, ret_revert, ret_tmp;
@@ -908,7 +927,7 @@ static int of_overlay_apply(struct overlay_changeset *ovcs)
if (ret)
goto out;
- ret = init_overlay_changeset(ovcs);
+ ret = init_overlay_changeset(ovcs, base);
if (ret)
goto out;
@@ -952,6 +971,7 @@ static int of_overlay_apply(struct overlay_changeset *ovcs)
* @overlay_fdt: pointer to overlay FDT
* @overlay_fdt_size: number of bytes in @overlay_fdt
* @ret_ovcs_id: pointer for returning created changeset id
+ * @base: pointer for the target node to apply overlay
*
* Creates and applies an overlay changeset.
*
@@ -967,7 +987,7 @@ static int of_overlay_apply(struct overlay_changeset *ovcs)
*/
int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size,
- int *ret_ovcs_id)
+ int *ret_ovcs_id, struct device_node *base)
{
void *new_fdt;
void *new_fdt_align;
@@ -1037,7 +1057,7 @@ int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size,
}
ovcs->overlay_mem = overlay_mem;
- ret = of_overlay_apply(ovcs);
+ ret = of_overlay_apply(ovcs, base);
/*
* If of_overlay_apply() error, calling free_overlay_changeset() may
* result in a memory leak if the apply partly succeeded, so do NOT
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 1193a574fa36..4a0774954b93 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -3506,7 +3506,8 @@ static int __init overlay_data_apply(const char *overlay_name, int *ovcs_id)
if (!size)
pr_err("no overlay data for %s\n", overlay_name);
- ret = of_overlay_fdt_apply(info->dtbo_begin, size, &info->ovcs_id);
+ ret = of_overlay_fdt_apply(info->dtbo_begin, size, &info->ovcs_id,
+ NULL);
if (ovcs_id)
*ovcs_id = info->ovcs_id;
if (ret < 0)
diff --git a/include/linux/of.h b/include/linux/of.h
index 82d0a476ec75..5fe5257a7ab7 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -1668,7 +1668,7 @@ struct of_overlay_notify_data {
#ifdef CONFIG_OF_OVERLAY
int of_overlay_fdt_apply(const void *overlay_fdt, u32 overlay_fdt_size,
- int *ovcs_id);
+ int *ovcs_id, struct device_node *target_base);
int of_overlay_remove(int *ovcs_id);
int of_overlay_remove_all(void);
--
2.34.1
The PCI endpoint device such as Xilinx Alveo PCI card maps the register
spaces from multiple hardware peripherals to its PCI BAR. Normally,
the PCI core discovers devices and BARs using the PCI enumeration process.
There is no infrastructure to discover the hardware peripherals that are
present in a PCI device, and which can be accessed through the PCI BARs.
For Alveo PCI card, the card firmware provides a flattened device tree to
describe the hardware peripherals on its BARs. The Alveo card driver can
load this flattened device tree and leverage device tree framework to
generate platform devices for the hardware peripherals eventually.
Apparently, the device tree framework requires a device tree node for the
PCI device. Thus, it can generate the device tree nodes for hardware
peripherals underneath. Because PCI is self discoverable bus, there might
not be a device tree node created for PCI devices. This patch is to add
support to generate device tree node for PCI devices.
Added a kernel option. When the option is turned on, the kernel will
generate device tree nodes for PCI bridges unconditionally.
Initially, the basic properties are added for the dynamically generated
device tree nodes.
Signed-off-by: Lizhi Hou <[email protected]>
---
drivers/pci/Kconfig | 12 +++
drivers/pci/Makefile | 1 +
drivers/pci/bus.c | 2 +
drivers/pci/of.c | 81 ++++++++++++++++-
drivers/pci/of_property.c | 179 ++++++++++++++++++++++++++++++++++++++
drivers/pci/pci.h | 19 ++++
drivers/pci/remove.c | 1 +
7 files changed, 294 insertions(+), 1 deletion(-)
create mode 100644 drivers/pci/of_property.c
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index 9309f2469b41..24c3107c68cc 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -193,6 +193,18 @@ config PCI_HYPERV
The PCI device frontend driver allows the kernel to import arbitrary
PCI devices from a PCI backend to support PCI driver domains.
+config PCI_DYNAMIC_OF_NODES
+ bool "Create Devicetree nodes for PCI devices"
+ depends on OF
+ select OF_DYNAMIC
+ help
+ This option enables support for generating device tree nodes for some
+ PCI devices. Thus, the driver of this kind can load and overlay
+ flattened device tree for its downstream devices.
+
+ Once this option is selected, the device tree nodes will be generated
+ for all PCI bridges.
+
choice
prompt "PCI Express hierarchy optimization setting"
default PCIE_BUS_DEFAULT
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index 2680e4c92f0a..cc8b4e01e29d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
obj-$(CONFIG_VGA_ARB) += vgaarb.o
obj-$(CONFIG_PCI_DOE) += doe.o
+obj-$(CONFIG_PCI_DYNAMIC_OF_NODES) += of_property.o
# Endpoint library must be initialized before its users
obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 5bc81cc0a2de..ab7d06cd0099 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -340,6 +340,8 @@ void pci_bus_add_device(struct pci_dev *dev)
*/
pcibios_bus_add_device(dev);
pci_fixup_device(pci_fixup_final, dev);
+ if (pci_is_bridge(dev))
+ of_pci_make_dev_node(dev);
pci_create_sysfs_dev_files(dev);
pci_proc_attach_device(dev);
pci_bridge_d3_update(dev);
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 2c25f4fa0225..01818b27a8da 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -501,8 +501,10 @@ static int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *
* to rely on this function (you ship a firmware that doesn't
* create device nodes for all PCI devices).
*/
- if (ppnode)
+ if (ppnode && of_property_present(ppnode, "interrupt-map"))
break;
+ else
+ ppnode = NULL;
/*
* We can only get here if we hit a P2P bridge with no node;
@@ -617,6 +619,83 @@ int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge)
return pci_parse_request_of_pci_ranges(dev, bridge);
}
+#if IS_ENABLED(CONFIG_PCI_DYNAMIC_OF_NODES)
+
+void of_pci_remove_node(struct pci_dev *pdev)
+{
+ struct device_node *np;
+
+ np = pci_device_to_OF_node(pdev);
+ if (!np || !of_node_check_flag(np, OF_DYNAMIC))
+ return;
+ pdev->dev.of_node = NULL;
+
+ of_changeset_revert(np->data);
+ of_changeset_destroy(np->data);
+ of_node_put(np);
+}
+
+void of_pci_make_dev_node(struct pci_dev *pdev)
+{
+ struct device_node *ppnode, *np = NULL;
+ const char *pci_type = "dev";
+ struct of_changeset *cset;
+ const char *name;
+ int ret;
+
+ /*
+ * If there is already a device tree node linked to this device,
+ * return immediately.
+ */
+ if (pci_device_to_OF_node(pdev))
+ return;
+
+ /* Check if there is device tree node for parent device */
+ if (!pdev->bus->self)
+ ppnode = pdev->bus->dev.of_node;
+ else
+ ppnode = pdev->bus->self->dev.of_node;
+ if (!ppnode)
+ return;
+
+ if (pci_is_bridge(pdev))
+ pci_type = "pci";
+
+ name = kasprintf(GFP_KERNEL, "%s@%x,%x", pci_type,
+ PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+ if (!name)
+ return;
+
+ cset = kmalloc(sizeof(*cset), GFP_KERNEL);
+ if (!cset)
+ goto failed;
+ of_changeset_init(cset);
+
+ np = of_changeset_create_node(ppnode, name, cset);
+ if (!np)
+ goto failed;
+ np->data = cset;
+
+ ret = of_pci_add_properties(pdev, cset, np);
+ if (ret)
+ goto failed;
+
+ ret = of_changeset_apply(cset);
+ if (ret)
+ goto failed;
+
+ pdev->dev.of_node = np;
+ kfree(name);
+
+ return;
+
+failed:
+ if (np)
+ of_node_put(np);
+ kfree(name);
+}
+#endif
+
#endif /* CONFIG_PCI */
/**
diff --git a/drivers/pci/of_property.c b/drivers/pci/of_property.c
new file mode 100644
index 000000000000..bdd756c8d7de
--- /dev/null
+++ b/drivers/pci/of_property.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/pci.h>
+#include <linux/of.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include "pci.h"
+
+#define OF_PCI_ADDRESS_CELLS 3
+#define OF_PCI_SIZE_CELLS 2
+
+struct of_pci_addr_pair {
+ u32 phys_addr[OF_PCI_ADDRESS_CELLS];
+ u32 size[OF_PCI_SIZE_CELLS];
+};
+
+struct of_pci_range {
+ u32 child_addr[OF_PCI_ADDRESS_CELLS];
+ u32 parent_addr[OF_PCI_ADDRESS_CELLS];
+ u32 size[OF_PCI_SIZE_CELLS];
+};
+
+#define OF_PCI_ADDR_SPACE_IO 0x1
+#define OF_PCI_ADDR_SPACE_MEM32 0x2
+#define OF_PCI_ADDR_SPACE_MEM64 0x3
+
+#define OF_PCI_ADDR_FIELD_NONRELOC BIT(31)
+#define OF_PCI_ADDR_FIELD_SS GENMASK(25, 24)
+#define OF_PCI_ADDR_FIELD_PREFETCH BIT(30)
+#define OF_PCI_ADDR_FIELD_BUS GENMASK(23, 16)
+#define OF_PCI_ADDR_FIELD_DEV GENMASK(15, 11)
+#define OF_PCI_ADDR_FIELD_FUNC GENMASK(10, 8)
+#define OF_PCI_ADDR_FIELD_REG GENMASK(7, 0)
+
+enum of_pci_prop_compatible {
+ PROP_COMPAT_PCI_VVVV_DDDD,
+ PROP_COMPAT_PCICLASS_CCSSPP,
+ PROP_COMPAT_PCICLASS_CCSS,
+ PROP_COMPAT_NUM,
+};
+
+static void of_pci_set_address(struct pci_dev *pdev, u32 *prop, u64 addr,
+ u32 reg_num, u32 flags, bool reloc)
+{
+ prop[0] = FIELD_PREP(OF_PCI_ADDR_FIELD_BUS, pdev->bus->number) |
+ FIELD_PREP(OF_PCI_ADDR_FIELD_DEV, PCI_SLOT(pdev->devfn)) |
+ FIELD_PREP(OF_PCI_ADDR_FIELD_FUNC, PCI_FUNC(pdev->devfn));
+ prop[0] |= flags | reg_num;
+ if (!reloc) {
+ prop[0] |= OF_PCI_ADDR_FIELD_NONRELOC;
+ prop[1] = upper_32_bits(addr);
+ prop[2] = lower_32_bits(addr);
+ }
+}
+
+static int of_pci_get_addr_flags(struct resource *res, u32 *flags)
+{
+ u32 ss;
+
+ if (res->flags & IORESOURCE_IO)
+ ss = OF_PCI_ADDR_SPACE_IO;
+ else if (res->flags & IORESOURCE_MEM_64)
+ ss = OF_PCI_ADDR_SPACE_MEM64;
+ else if (res->flags & IORESOURCE_MEM)
+ ss = OF_PCI_ADDR_SPACE_MEM32;
+ else
+ return -EINVAL;
+
+ *flags = 0;
+ if (res->flags & IORESOURCE_PREFETCH)
+ *flags |= OF_PCI_ADDR_FIELD_PREFETCH;
+
+ *flags |= FIELD_PREP(OF_PCI_ADDR_FIELD_SS, ss);
+
+ return 0;
+}
+
+static int of_pci_prop_ranges(struct pci_dev *pdev, struct of_changeset *ocs,
+ struct device_node *np)
+{
+ struct of_pci_range *rp;
+ struct resource *res;
+ int i = 0, j, ret;
+ u64 val64;
+ u32 flags;
+
+ rp = kcalloc(PCI_BRIDGE_RESOURCE_NUM, sizeof(*rp), GFP_KERNEL);
+ if (!rp)
+ return -ENOMEM;
+
+ res = &pdev->resource[PCI_BRIDGE_RESOURCES];
+ for (j = 0; j < PCI_BRIDGE_RESOURCE_NUM; j++) {
+ if (!resource_size(&res[j]))
+ continue;
+
+ if (of_pci_get_addr_flags(&res[j], &flags))
+ continue;
+
+ val64 = res[j].start;
+ of_pci_set_address(pdev, rp[i].parent_addr, val64, 0, flags,
+ false);
+ memcpy(rp[i].child_addr, rp[i].parent_addr,
+ sizeof(rp[i].child_addr));
+
+ val64 = resource_size(&res[j]);
+ rp[i].size[0] = upper_32_bits(val64);
+ rp[i].size[1] = lower_32_bits(val64);
+
+ i++;
+ }
+
+ ret = of_changeset_add_prop_u32_array(ocs, np, "ranges", (u32 *)rp,
+ i * sizeof(*rp) / sizeof(u32));
+ kfree(rp);
+
+ return ret;
+}
+
+static int of_pci_prop_reg(struct pci_dev *pdev, struct of_changeset *ocs,
+ struct device_node *np)
+{
+ struct of_pci_addr_pair reg;
+
+ /* configuration space */
+ of_pci_set_address(pdev, reg.phys_addr, 0, 0, 0, true);
+
+ return of_changeset_add_prop_u32_array(ocs, np, "reg", (u32 *)®,
+ sizeof(reg) / sizeof(u32));
+}
+
+static int of_pci_prop_compatible(struct pci_dev *pdev,
+ struct of_changeset *ocs,
+ struct device_node *np)
+{
+ const char *compat_strs[PROP_COMPAT_NUM] = { 0 };
+ int i, ret;
+
+ compat_strs[PROP_COMPAT_PCI_VVVV_DDDD] =
+ kasprintf(GFP_KERNEL, "pci%x,%x", pdev->vendor, pdev->device);
+ compat_strs[PROP_COMPAT_PCICLASS_CCSSPP] =
+ kasprintf(GFP_KERNEL, "pciclass,%06x", pdev->class);
+ compat_strs[PROP_COMPAT_PCICLASS_CCSS] =
+ kasprintf(GFP_KERNEL, "pciclass,%04x", pdev->class >> 8);
+
+ ret = of_changeset_add_prop_string_array(ocs, np, "compatible",
+ compat_strs, PROP_COMPAT_NUM);
+ for (i = 0; i < PROP_COMPAT_NUM; i++)
+ kfree(compat_strs[i]);
+
+ return ret;
+}
+
+int of_pci_add_properties(struct pci_dev *pdev, struct of_changeset *ocs,
+ struct device_node *np)
+{
+ int ret = 0;
+
+ if (pci_is_bridge(pdev)) {
+ ret |= of_changeset_add_prop_string(ocs, np, "device_type",
+ "pci");
+ ret |= of_changeset_add_prop_u32(ocs, np, "#address-cells",
+ OF_PCI_ADDRESS_CELLS);
+ ret |= of_changeset_add_prop_u32(ocs, np, "#size-cells",
+ OF_PCI_SIZE_CELLS);
+ ret |= of_pci_prop_ranges(pdev, ocs, np);
+ }
+
+ ret |= of_pci_prop_reg(pdev, ocs, np);
+ ret |= of_pci_prop_compatible(pdev, ocs, np);
+
+ /*
+ * The added properties will be released when the
+ * changeset is destroyed.
+ */
+ return ret;
+}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2475098f6518..82cc2b35ff6d 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -678,6 +678,25 @@ static inline int devm_of_pci_bridge_init(struct device *dev, struct pci_host_br
#endif /* CONFIG_OF */
+struct of_changeset;
+
+#ifdef CONFIG_PCI_DYNAMIC_OF_NODES
+void of_pci_make_dev_node(struct pci_dev *pdev);
+void of_pci_remove_node(struct pci_dev *pdev);
+int of_pci_add_properties(struct pci_dev *pdev, struct of_changeset *ocs,
+ struct device_node *np);
+#else
+static inline void
+of_pci_make_dev_node(struct pci_dev *pdev)
+{
+}
+
+static inline void
+of_pci_remove_node(struct pci_dev *pdev)
+{
+}
+#endif /* CONFIG_PCI_DYNAMIC_OF_NODES */
+
#ifdef CONFIG_PCIEAER
void pci_no_aer(void);
void pci_aer_init(struct pci_dev *dev);
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index d68aee29386b..d749ea8250d6 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -22,6 +22,7 @@ static void pci_stop_dev(struct pci_dev *dev)
device_release_driver(&dev->dev);
pci_proc_detach_device(dev);
pci_remove_sysfs_dev_files(dev);
+ of_pci_remove_node(dev);
pci_dev_assign_added(dev, false);
}
--
2.34.1
pci_dt_testdrv is bound to QEMU PCI Test Device. It reads
overlay_pci_node fdt fragment and apply it to Test Device. Then it
calls of_platform_default_populate() to populate the platform
devices.
Signed-off-by: Lizhi Hou <[email protected]>
---
drivers/of/unittest-data/Makefile | 3 +-
.../of/unittest-data/overlay_pci_node.dtso | 22 ++
drivers/of/unittest.c | 188 ++++++++++++++++++
3 files changed, 212 insertions(+), 1 deletion(-)
create mode 100644 drivers/of/unittest-data/overlay_pci_node.dtso
diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index ea5f4da68e23..1aa875088159 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -32,7 +32,8 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtbo.o \
overlay_gpio_02b.dtbo.o \
overlay_gpio_03.dtbo.o \
overlay_gpio_04a.dtbo.o \
- overlay_gpio_04b.dtbo.o
+ overlay_gpio_04b.dtbo.o \
+ overlay_pci_node.dtbo.o
# enable creation of __symbols__ node
DTC_FLAGS_overlay += -@
diff --git a/drivers/of/unittest-data/overlay_pci_node.dtso b/drivers/of/unittest-data/overlay_pci_node.dtso
new file mode 100644
index 000000000000..c05e52e9e44a
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_pci_node.dtso
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/ {
+ fragment@0 {
+ target-path="";
+ __overlay__ {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ pci-ep-bus@0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x0 0x0 0x1000>;
+ reg = <0 0 0 0 0>;
+ unittest-pci@100 {
+ compatible = "unittest-pci";
+ reg = <0x100 0x200>;
+ };
+ };
+ };
+ };
+};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 4a0774954b93..e21f0bdc1b85 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -22,6 +22,7 @@
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/i2c.h>
@@ -3352,6 +3353,7 @@ OVERLAY_INFO_EXTERN(overlay_gpio_02b);
OVERLAY_INFO_EXTERN(overlay_gpio_03);
OVERLAY_INFO_EXTERN(overlay_gpio_04a);
OVERLAY_INFO_EXTERN(overlay_gpio_04b);
+OVERLAY_INFO_EXTERN(overlay_pci_node);
OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
OVERLAY_INFO_EXTERN(overlay_bad_add_dup_prop);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
@@ -3387,6 +3389,7 @@ static struct overlay_info overlays[] = {
OVERLAY_INFO(overlay_gpio_03, 0),
OVERLAY_INFO(overlay_gpio_04a, 0),
OVERLAY_INFO(overlay_gpio_04b, 0),
+ OVERLAY_INFO(overlay_pci_node, 0),
OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
OVERLAY_INFO(overlay_bad_add_dup_prop, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
@@ -3757,6 +3760,190 @@ static inline __init void of_unittest_overlay_high_level(void) {}
#endif
+#ifdef CONFIG_PCI_DYNAMIC_OF_NODES
+
+int of_unittest_pci_dev_num;
+int of_unittest_pci_child_num;
+
+/*
+ * PCI device tree node test driver
+ */
+static const struct pci_device_id testdrv_pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_REDHAT, 0x5), }, /* PCI_VENDOR_ID_REDHAT */
+ { 0, }
+};
+
+static int testdrv_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct overlay_info *info;
+ struct device_node *dn;
+ int ret, ovcs_id;
+ u32 size;
+
+ dn = pdev->dev.of_node;
+ if (!dn) {
+ dev_err(&pdev->dev, "does not find bus endpoint");
+ return -EINVAL;
+ }
+
+ for (info = overlays; info && info->name; info++) {
+ if (!strcmp(info->name, "overlay_pci_node"))
+ break;
+ }
+ if (!info || !info->name) {
+ dev_err(&pdev->dev, "no overlay data for overlay_pci_node");
+ return -ENODEV;
+ }
+
+ size = info->dtbo_end - info->dtbo_begin;
+ ret = of_overlay_fdt_apply(info->dtbo_begin, size, &ovcs_id, dn);
+ of_node_put(dn);
+ if (ret)
+ return ret;
+
+ of_platform_default_populate(dn, NULL, &pdev->dev);
+ pci_set_drvdata(pdev, (void *)(uintptr_t)ovcs_id);
+
+ return 0;
+}
+
+static void testdrv_remove(struct pci_dev *pdev)
+{
+ int ovcs_id = (int)(uintptr_t)pci_get_drvdata(pdev);
+
+ of_platform_depopulate(&pdev->dev);
+ of_overlay_remove(&ovcs_id);
+}
+
+static struct pci_driver testdrv_driver = {
+ .name = "pci_dt_testdrv",
+ .id_table = testdrv_pci_ids,
+ .probe = testdrv_probe,
+ .remove = testdrv_remove,
+};
+
+static int unittest_pci_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct device *dev;
+ u64 exp_addr;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ dev = &pdev->dev;
+ while (dev && !dev_is_pci(dev))
+ dev = dev->parent;
+ if (!dev) {
+ pr_err("unable to find parent device\n");
+ return -ENODEV;
+ }
+
+ exp_addr = pci_resource_start(to_pci_dev(dev), 0) + 0x100;
+ unittest(res->start == exp_addr, "Incorrect translated address %llx, expected %llx\n",
+ res->start, exp_addr);
+
+ of_unittest_pci_child_num++;
+
+ return 0;
+}
+
+static const struct of_device_id unittest_pci_of_match[] = {
+ { .compatible = "unittest-pci" },
+ { }
+};
+
+static struct platform_driver unittest_pci_driver = {
+ .probe = unittest_pci_probe,
+ .driver = {
+ .name = "unittest-pci",
+ .of_match_table = unittest_pci_of_match,
+ },
+};
+
+static int of_unittest_pci_node_verify(struct pci_dev *pdev, bool add)
+{
+ struct device_node *pnp, *np = NULL;
+ struct device *child_dev;
+ char *path = NULL;
+ const __be32 *reg;
+ int rc = 0;
+
+ pnp = pdev->dev.of_node;
+ unittest(pnp, "Failed creating PCI dt node\n");
+ if (!pnp)
+ return -ENODEV;
+
+ if (add) {
+ path = kasprintf(GFP_KERNEL, "%pOF/pci-ep-bus@0/unittest-pci@100", pnp);
+ np = of_find_node_by_path(path);
+ unittest(np, "Failed to get unittest-pci node under PCI node\n");
+ if (!np) {
+ rc = -ENODEV;
+ goto failed;
+ }
+
+ reg = of_get_property(np, "reg", NULL);
+ unittest(reg, "Failed to get reg property\n");
+ if (!reg)
+ rc = -ENODEV;
+ } else {
+ path = kasprintf(GFP_KERNEL, "%pOF/pci-ep-bus@0", pnp);
+ np = of_find_node_by_path(path);
+ unittest(!np, "Child device tree node is not removed\n");
+ child_dev = device_find_any_child(&pdev->dev);
+ unittest(!child_dev, "Child device is not removed\n");
+ }
+
+failed:
+ kfree(path);
+ if (np)
+ of_node_put(np);
+
+ return rc;
+}
+
+static void __init of_unittest_pci_node(void)
+{
+ struct pci_dev *pdev = NULL;
+ int rc;
+
+ rc = pci_register_driver(&testdrv_driver);
+ unittest(!rc, "Failed to register pci test driver; rc = %d\n", rc);
+ if (rc)
+ return;
+
+ rc = platform_driver_register(&unittest_pci_driver);
+ if (unittest(!rc, "Failed to register unittest pci driver\n")) {
+ pci_unregister_driver(&testdrv_driver);
+ return;
+ }
+
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_REDHAT, 0x5, pdev)) != NULL) {
+ of_unittest_pci_node_verify(pdev, true);
+ of_unittest_pci_dev_num++;
+ }
+ if (pdev)
+ pci_dev_put(pdev);
+
+ unittest(of_unittest_pci_dev_num, "No test PCI device been found\n");
+ unittest(of_unittest_pci_dev_num == of_unittest_pci_child_num,
+ "Child device number %d is not expected %d", of_unittest_pci_child_num,
+ of_unittest_pci_dev_num);
+
+ platform_driver_unregister(&unittest_pci_driver);
+ pci_unregister_driver(&testdrv_driver);
+
+ while ((pdev = pci_get_device(PCI_VENDOR_ID_REDHAT, 0x5, pdev)) != NULL)
+ of_unittest_pci_node_verify(pdev, false);
+ if (pdev)
+ pci_dev_put(pdev);
+}
+#else
+static void __init of_unittest_pci_node(void) { }
+#endif
+
static int __init of_unittest(void)
{
struct device_node *np;
@@ -3807,6 +3994,7 @@ static int __init of_unittest(void)
of_unittest_platform_populate();
of_unittest_overlay();
of_unittest_lifecycle();
+ of_unittest_pci_node();
/* Double check linkage after removing testcase data */
of_unittest_check_tree_linkage();
--
2.34.1
Hi Lizhi,
kernel test robot noticed the following build warnings:
[auto build test WARNING on pci/next]
[also build test WARNING on pci/for-linus robh/for-next linus/master v6.4-rc6 next-20230615]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Lizhi-Hou/of-dynamic-Add-interfaces-for-creating-device-node-dynamically/20230616-005610
base: https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git next
patch link: https://lore.kernel.org/r/1686847842-33780-7-git-send-email-lizhi.hou%40amd.com
patch subject: [PATCH V9 6/6] of: unittest: Add pci_dt_testdrv pci driver
config: mips-allyesconfig (https://download.01.org/0day-ci/archive/20230616/[email protected]/config)
compiler: mips-linux-gcc (GCC) 12.3.0
reproduce (this is a W=1 build):
mkdir -p ~/bin
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git remote add pci https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git
git fetch pci next
git checkout pci/next
b4 shazam https://lore.kernel.org/r/[email protected]
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.3.0 ~/bin/make.cross W=1 O=build_dir ARCH=mips olddefconfig
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.3.0 ~/bin/make.cross W=1 O=build_dir ARCH=mips SHELL=/bin/bash drivers/
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
All warnings (new ones prefixed by >>):
In file included from include/asm-generic/bug.h:22,
from arch/mips/include/asm/bug.h:42,
from include/linux/bug.h:5,
from include/linux/mmdebug.h:5,
from include/linux/mm.h:6,
from include/linux/memblock.h:12,
from drivers/of/unittest.c:8:
drivers/of/unittest.c: In function 'unittest_pci_probe':
>> include/linux/kern_levels.h:5:25: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=]
5 | #define KERN_SOH "\001" /* ASCII Start Of Header */
| ^~~~~~
include/linux/printk.h:427:25: note: in definition of macro 'printk_index_wrap'
427 | _p_func(_fmt, ##__VA_ARGS__); \
| ^~~~
include/linux/printk.h:498:9: note: in expansion of macro 'printk'
498 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~
include/linux/kern_levels.h:11:25: note: in expansion of macro 'KERN_SOH'
11 | #define KERN_ERR KERN_SOH "3" /* error conditions */
| ^~~~~~~~
include/linux/printk.h:498:16: note: in expansion of macro 'KERN_ERR'
498 | printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
| ^~~~~~~~
drivers/of/unittest.c:45:17: note: in expansion of macro 'pr_err'
45 | pr_err("FAIL %s():%i " fmt, __func__, __LINE__, ##__VA_ARGS__); \
| ^~~~~~
drivers/of/unittest.c:3844:9: note: in expansion of macro 'unittest'
3844 | unittest(res->start == exp_addr, "Incorrect translated address %llx, expected %llx\n",
| ^~~~~~~~
vim +5 include/linux/kern_levels.h
314ba3520e513a Joe Perches 2012-07-30 4
04d2c8c83d0e3a Joe Perches 2012-07-30 @5 #define KERN_SOH "\001" /* ASCII Start Of Header */
04d2c8c83d0e3a Joe Perches 2012-07-30 6 #define KERN_SOH_ASCII '\001'
04d2c8c83d0e3a Joe Perches 2012-07-30 7
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
On Thu, Jun 15, 2023 at 09:50:36AM -0700, Lizhi Hou wrote:
> This patch series introduces OF overlay support for PCI devices which
> primarily addresses two use cases. First, it provides a data driven method
> to describe hardware peripherals that are present in a PCI endpoint and
> hence can be accessed by the PCI host. Second, it allows reuse of a OF
> compatible driver -- often used in SoC platforms -- in a PCI host based
> system.
>
> There are 2 series devices rely on this patch:
>
> 1) Xilinx Alveo Accelerator cards (FPGA based device)
> 2) Microchip LAN9662 Ethernet Controller
>
> Please see: https://lore.kernel.org/lkml/[email protected]/
>
> Normally, the PCI core discovers PCI devices and their BARs using the
> PCI enumeration process. However, the process does not provide a way to
> discover the hardware peripherals that are present in a PCI device, and
> which can be accessed through the PCI BARs. Also, the enumeration process
> does not provide a way to associate MSI-X vectors of a PCI device with the
> hardware peripherals that are present in the device. PCI device drivers
> often use header files to describe the hardware peripherals and their
> resources as there is no standard data driven way to do so. This patch
> series proposes to use flattened device tree blob to describe the
> peripherals in a data driven way. Based on previous discussion, using
> device tree overlay is the best way to unflatten the blob and populate
> platform devices. To use device tree overlay, there are three obvious
> problems that need to be resolved.
>
> First, we need to create a base tree for non-DT system such as x86_64. A
> patch series has been submitted for this:
> https://lore.kernel.org/lkml/[email protected]/
> https://lore.kernel.org/lkml/[email protected]/
>
> Second, a device tree node corresponding to the PCI endpoint is required
> for overlaying the flattened device tree blob for that PCI endpoint.
> Because PCI is a self-discoverable bus, a device tree node is usually not
> created for PCI devices. This series adds support to generate a device
> tree node for a PCI device which advertises itself using PCI quirks
> infrastructure.
>
> Third, we need to generate device tree nodes for PCI bridges since a child
> PCI endpoint may choose to have a device tree node created.
>
> This patch series is made up of three patches.
>
> The first patch is adding OF interface to create or destroy OF node
> dynamically.
>
> The second patch introduces a kernel option, CONFIG_DYNAMIC_PCI_OF_NODEX.
> When the option is turned on, the kernel will generate device tree nodes
> for all PCI bridges unconditionally. The patch also shows how to use the
> PCI quirks infrastructure, DECLARE_PCI_FIXUP_FINAL to generate a device
> tree node for a device. Specifically, the patch generates a device tree
> node for Xilinx Alveo U50 PCIe accelerator device. The generated device
> tree nodes do not have any property.
>
> The third patch adds basic properties ('reg', 'compatible' and
> 'device_type') to the dynamically generated device tree nodes. More
> properties can be added in the future.
>
> Here is the example of device tree nodes generated within the ARM64 QEMU.
> # lspci -t
> -[0000:00]-+-00.0
> +-01.0
> +-03.0-[01-03]----00.0-[02-03]----00.0-[03]----00.0
> +-03.1-[04]--
> \-04.0-[05-06]----00.0-[06]--
> # tree /sys/firmware/devicetree/base/pcie\@10000000
> /sys/firmware/devicetree/base/pcie@10000000
> |-- #address-cells
> |-- #interrupt-cells
> |-- #size-cells
> |-- bus-range
> |-- compatible
> |-- device_type
> |-- dma-coherent
> |-- interrupt-map
> |-- interrupt-map-mask
> |-- linux,pci-domain
> |-- msi-map
> |-- name
> |-- pci@3,0
> | |-- #address-cells
> | |-- #size-cells
> | |-- compatible
> | |-- device_type
> | |-- pci@0,0
> | | |-- #address-cells
> | | |-- #size-cells
> | | |-- compatible
> | | |-- device_type
> | | |-- pci@0,0
> | | | |-- #address-cells
> | | | |-- #size-cells
> | | | |-- compatible
> | | | |-- dev@0,0
> | | | | |-- #address-cells
> | | | | |-- #size-cells
> | | | | |-- compatible
> | | | | |-- ranges
> | | | | `-- reg
> | | | |-- device_type
> | | | |-- ranges
> | | | `-- reg
> | | |-- ranges
> | | `-- reg
> | |-- ranges
> | `-- reg
> |-- pci@3,1
> | |-- #address-cells
> | |-- #size-cells
> | |-- compatible
> | |-- device_type
> | |-- ranges
> | `-- reg
> |-- pci@4,0
> | |-- #address-cells
> | |-- #size-cells
> | |-- compatible
> | |-- device_type
> | |-- pci@0,0
> | | |-- #address-cells
> | | |-- #size-cells
> | | |-- compatible
> | | |-- device_type
> | | |-- ranges
> | | `-- reg
> | |-- ranges
> | `-- reg
> |-- ranges
> `-- reg
>
> Changes since v8:
> - Added patches to create unit test to verifying address translation
> The test relies on QEMU PCI Test Device, please see
> https://github.com/houlz0507/xoclv2/blob/pci-dt-0329/pci-dt-patch-0329/README
> for test setup
> - Minor code review fixes
>
> Changes since v7:
> - Modified dynamic node creation interfaces
> - Added unittest for new added interfaces
>
> Changes since v6:
> - Removed single line wrapper functions
> - Added Signed-off-by Cl?ment L?ger <[email protected]>
>
> Changes since v5:
> - Fixed code review comments
> - Fixed incorrect 'ranges' and 'reg' properties
>
> Changes since RFC v4:
> - Fixed code review comments
>
> Changes since RFC v3:
> - Split the Xilinx Alveo U50 PCI quirk to a separate patch
> - Minor changes in commit description and code comment
>
> Changes since RFC v2:
> - Merged patch 3 with patch 2
> - Added OF interfaces of_changeset_add_prop_* and use them to create
> properties.
> - Added '#address-cells', '#size-cells' and 'ranges' properties.
>
> Changes since RFC v1:
> - Added one patch to create basic properties.
> - To move DT related code out of PCI subsystem, replaced of_node_alloc()
> with of_create_node()/of_destroy_node()
>
> Lizhi Hou (6):
> of: dynamic: Add interfaces for creating device node dynamically
> PCI: Create device tree node for selected devices
> PCI: Add PCI quirks to generate device tree node for Xilinx Alveo U50
> PCI: Add ranges property for pci endpoint
> of: overlay: Extend of_overlay_fdt_apply() to specify the target node
> of: unittest: Add pci_dt_testdrv pci driver
>
> drivers/of/dynamic.c | 164 ++++++++++++++
> drivers/of/overlay.c | 42 +++-
> drivers/of/unittest-data/Makefile | 3 +-
> .../of/unittest-data/overlay_pci_node.dtso | 22 ++
> drivers/of/unittest.c | 210 +++++++++++++++++-
> drivers/pci/Kconfig | 12 +
> drivers/pci/Makefile | 1 +
> drivers/pci/bus.c | 2 +
> drivers/pci/of.c | 81 ++++++-
> drivers/pci/of_property.c | 190 ++++++++++++++++
> drivers/pci/pci.h | 19 ++
> drivers/pci/quirks.c | 12 +
> drivers/pci/remove.c | 1 +
> include/linux/of.h | 25 ++-
> 14 files changed, 768 insertions(+), 16 deletions(-)
> create mode 100644 drivers/of/unittest-data/overlay_pci_node.dtso
> create mode 100644 drivers/pci/of_property.c
Bjorn, I think this is pretty close to being in shape for merging. Do
you have any comments on the PCI bits? Would you prefer that I ack the
DT bit and you take it or vice-versa?
Rob
On Tue, Jun 20, 2023 at 04:08:18PM -0600, Rob Herring wrote:
> On Thu, Jun 15, 2023 at 09:50:36AM -0700, Lizhi Hou wrote:
> > This patch series introduces OF overlay support for PCI devices which
> > primarily addresses two use cases. First, it provides a data driven method
> > to describe hardware peripherals that are present in a PCI endpoint and
> > hence can be accessed by the PCI host. Second, it allows reuse of a OF
> > compatible driver -- often used in SoC platforms -- in a PCI host based
> > system.
> > drivers/of/dynamic.c | 164 ++++++++++++++
> > drivers/of/overlay.c | 42 +++-
> > drivers/of/unittest-data/Makefile | 3 +-
> > .../of/unittest-data/overlay_pci_node.dtso | 22 ++
> > drivers/of/unittest.c | 210 +++++++++++++++++-
> > drivers/pci/Kconfig | 12 +
> > drivers/pci/Makefile | 1 +
> > drivers/pci/bus.c | 2 +
> > drivers/pci/of.c | 81 ++++++-
> > drivers/pci/of_property.c | 190 ++++++++++++++++
> > drivers/pci/pci.h | 19 ++
> > drivers/pci/quirks.c | 12 +
> > drivers/pci/remove.c | 1 +
> > include/linux/of.h | 25 ++-
> > 14 files changed, 768 insertions(+), 16 deletions(-)
> > create mode 100644 drivers/of/unittest-data/overlay_pci_node.dtso
> > create mode 100644 drivers/pci/of_property.c
>
> Bjorn, I think this is pretty close to being in shape for merging. Do
> you have any comments on the PCI bits? Would you prefer that I ack the
> DT bit and you take it or vice-versa?
I acked the PCI bits (modulo some trivial comments), and this seems
more DTish than PCIish, so happy if you would take them.
Bjorn