Rob Herring pointed out that I had the mailing lists wrong. So this is a
resend of v7 with the full list from get_maintainers added.
This adds initial support for the Mixel IP based mipi dphy as found on i.MX8
processors. It has support for the i.MX8MQ, support for other variants can be
added - once the platform specific parts are in - via the provided devdata.
The driver is somewhat based on what's found in NXPs BSP.
Public documentation on the DPHY's registers is currently thin in the i.MX8
reference manuals (even on the i.MX8QXP form 11/18) so most of the values were
taken from existing drivers. Newer NXP drivers have a bit more details so where
possible the timings are calculated and validated.
I've also sent out an initial version of a NWL mipi dsi host controller driver
using this:
https://lists.freedesktop.org/archives/dri-devel/2019-March/209685.html
Robert Chiras (the author of the corresponding driver in NXPs vendor tree) got
this driver to work in his tree as well:
https://www.spinics.net/lists/arm-kernel/msg711950.html
Chages from v6
* Depend on HAS_IOMEM (fixes a build problem on UM spotted by kbuild)
Chages from v5
* Fix build problems on mips (spotted by the kbuild test robot) by using u32
consistently and long long for lp_t.
Changes from v4
* Build by default on ARCH_MXC && ARM64
Changes form v3
* Check correct variable after devm_ioremap_resource
* Add Robert Chiras as Co-authored-by since he's the author
of the driver in NXPs BSP.
Changes from v2
* As per review comments from Fabio Estevam
* KConfig: select REGMAP_MMIO
* Drop phy_read
* Don't make phy_write inline
* Remove duplicate debugging output
* Comment style and typo fixes
* Add #defines's for PLL lock timing values
* Return correct error value when PLL fails to lock
* Check error when enabling clock
* Use devm_ioremap_resource
* As per review comments from Robert Chiras
* Deassert PD_DPHY after PLL lock (as per mixel ref manual)
* Assert PD_{DPHY,PLL} before power on (as per mixel ref manual)manual
* Add exit phy_op to reset CN/CM/CO
Changes from v1
* As per review comments from Fabio Estevam
* Kconfig: tristate mixel dphy support.
* Drop unused 'ret' in mixel_dphy_ref_power_off.
* Match values of DPHY_RXL{PRP,DRP} to those of
https://source.codeaurora.org/external/imx/linux-imx/log/?h=imx_4.14.78_1.0.0_ga
The previous values were based on 4.9.
* Use resource size on devm_ioremap, we have that in dt already.
* Use regmap so it's simple to dump the registers.
* Use regmap_read_poll_timeout instead of open coded loop.
* Add undocumented rxhs_settle register
* As per review comments from Sam Ravnborg
* Move driver to d/phy/freescale/
* Move SPDX-License-Identifier to top of file.
* Drop '/* #define DEBUG 1 */'.
* Use GPL-2.0+ since the vendor driver uses that as well.
* Drop the mutex, register access is now protected by regmap.
* Fix various style / indentation issues.
* Check for register read, write and ioremap errors
* Improve phy timing calculations
* Use LP clock rate where sensible, check for errors
* Use ad hoc forumulas for timings involving hs clock
* Switch from dphy_ops to devdata. Other i.MX8 variants
differ in register layout too
* Add Mixel Inc to vendor-prefixes.txt
To: Kishon Vijay Abraham I <[email protected]>,Rob Herring <[email protected]>,Mark Rutland <[email protected]>,Shawn Guo <[email protected]>,Sascha Hauer <[email protected]>,Pengutronix Kernel Team <[email protected]>,Fabio Estevam <[email protected]>,NXP Linux Team <[email protected]>,Thierry Reding <[email protected]>,"Andreas Färber" <[email protected]>,Martin Blumenstingl <[email protected]>,Heiko Stuebner <[email protected]>,Johan Hovold <[email protected]>,Lucas Stach <[email protected]>,Abel Vesa <[email protected]>,Li Jun <[email protected]>,[email protected],[email protected],[email protected],[email protected],Robert Chiras <[email protected]>,Sam Ravnborg <[email protected]>,Maxime Ripard <[email protected]>
Guido Günther (3):
dt-bindings: Add vendor prefix for Mixel Inc
dt-bindings: phy: Add documentation for mixel dphy
phy: Add driver for mixel dphy found on imx8
.../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +
.../devicetree/bindings/vendor-prefixes.txt | 1 +
drivers/phy/freescale/Kconfig | 11 +
drivers/phy/freescale/Makefile | 1 +
.../phy/freescale/phy-fsl-imx8-mipi-dphy.c | 506 ++++++++++++++++++
5 files changed, 548 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
create mode 100644 drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
--
2.20.1
Add support for the MIXEL DPHY IP as found in the NXP's i.MX8MQ.
Signed-off-by: Guido Günther <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
.../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
new file mode 100644
index 000000000000..d3646580412a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
@@ -0,0 +1,29 @@
+Mixel DSI PHY for i.MX8
+
+The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
+MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
+electrical signals for DSI.
+
+Required properties:
+- compatible: Must be:
+ - "mixel,imx8mq-mipi-dphy"
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Must contain the following entries:
+ - "phy_ref": phandle and specifier referring to the DPHY ref clock
+- reg: the register range of the PHY controller
+- #phy-cells: number of cells in PHY, as defined in
+ Documentation/devicetree/bindings/phy/phy-bindings.txt
+ this must be <0>
+
+Optional properties:
+- power-domains: phandle to power domain
+
+Example:
+ mipi_dphy: mipi_dphy@30A0030 {
+ compatible = "mixel,imx8mq-mipi-dphy";
+ clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
+ clock-names = "phy_ref";
+ reg = <0x30A00300 0x100>;
+ power-domains = <&pd_mipi0>;
+ #phy-cells = <0>;
+ };
--
2.20.1
This adds support for the Mixel DPHY as found on i.MX8 CPUs but since
this is an IP core it will likely be found on others in the future. So
instead of adding this to the nwl host driver make it a generic PHY
driver.
The driver supports the i.MX8MQ. Support for i.MX8QM and i.MX8QXP can be
added once the necessary system controller bits are in via
mixel_dphy_devdata.
Co-authored-by: Robert Chiras <[email protected]>
Signed-off-by: Guido Günther <[email protected]>
---
drivers/phy/freescale/Kconfig | 11 +
drivers/phy/freescale/Makefile | 1 +
.../phy/freescale/phy-fsl-imx8-mipi-dphy.c | 506 ++++++++++++++++++
3 files changed, 518 insertions(+)
create mode 100644 drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 832670b4952b..a111b130f9d2 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -3,3 +3,14 @@ config PHY_FSL_IMX8MQ_USB
depends on OF && HAS_IOMEM
select GENERIC_PHY
default ARCH_MXC && ARM64
+
+config PHY_MIXEL_MIPI_DPHY
+ tristate "Mixel MIPI DSI PHY support"
+ depends on OF && HAS_IOMEM
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ select REGMAP_MMIO
+ default ARCH_MXC && ARM64
+ help
+ Enable this to add support for the Mixel DSI PHY as found
+ on NXP's i.MX8 family of SOCs.
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index dc2b3f1f2f80..07491c926a2c 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_PHY_FSL_IMX8MQ_USB) += phy-fsl-imx8mq-usb.o
+obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY) += phy-fsl-imx8-mipi-dphy.o
diff --git a/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
new file mode 100644
index 000000000000..fd487a9e5a35
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-imx8-mipi-dphy.c
@@ -0,0 +1,506 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017,2018 NXP
+ * Copyright 2019 Purism SPC
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* DPHY registers */
+#define DPHY_PD_DPHY 0x00
+#define DPHY_M_PRG_HS_PREPARE 0x04
+#define DPHY_MC_PRG_HS_PREPARE 0x08
+#define DPHY_M_PRG_HS_ZERO 0x0c
+#define DPHY_MC_PRG_HS_ZERO 0x10
+#define DPHY_M_PRG_HS_TRAIL 0x14
+#define DPHY_MC_PRG_HS_TRAIL 0x18
+#define DPHY_PD_PLL 0x1c
+#define DPHY_TST 0x20
+#define DPHY_CN 0x24
+#define DPHY_CM 0x28
+#define DPHY_CO 0x2c
+#define DPHY_LOCK 0x30
+#define DPHY_LOCK_BYP 0x34
+#define DPHY_REG_BYPASS_PLL 0x4C
+
+#define MBPS(x) ((x) * 1000000)
+
+#define DATA_RATE_MAX_SPEED MBPS(1500)
+#define DATA_RATE_MIN_SPEED MBPS(80)
+
+#define PLL_LOCK_SLEEP 10
+#define PLL_LOCK_TIMEOUT 1000
+
+#define CN_BUF 0xcb7a89c0
+#define CO_BUF 0x63
+#define CM(x) ( \
+ ((x) < 32)?0xe0|((x)-16) : \
+ ((x) < 64)?0xc0|((x)-32) : \
+ ((x) < 128)?0x80|((x)-64) : \
+ ((x) - 128))
+#define CN(x) (((x) == 1)?0x1f : (((CN_BUF)>>((x)-1))&0x1f))
+#define CO(x) ((CO_BUF)>>(8-(x))&0x3)
+
+/* PHY power on is active low */
+#define PWR_ON 0
+#define PWR_OFF 1
+
+enum mixel_dphy_devtype {
+ MIXEL_IMX8MQ,
+};
+
+struct mixel_dphy_devdata {
+ u8 reg_tx_rcal;
+ u8 reg_auto_pd_en;
+ u8 reg_rxlprp;
+ u8 reg_rxcdrp;
+ u8 reg_rxhs_settle;
+};
+
+static const struct mixel_dphy_devdata mixel_dphy_devdata[] = {
+ [MIXEL_IMX8MQ] = {
+ .reg_tx_rcal = 0x38,
+ .reg_auto_pd_en = 0x3c,
+ .reg_rxlprp = 0x40,
+ .reg_rxcdrp = 0x44,
+ .reg_rxhs_settle = 0x48,
+ },
+};
+
+struct mixel_dphy_cfg {
+ /* DPHY PLL parameters */
+ u32 cm;
+ u32 cn;
+ u32 co;
+ /* DPHY register values */
+ u8 mc_prg_hs_prepare;
+ u8 m_prg_hs_prepare;
+ u8 mc_prg_hs_zero;
+ u8 m_prg_hs_zero;
+ u8 mc_prg_hs_trail;
+ u8 m_prg_hs_trail;
+ u8 rxhs_settle;
+};
+
+struct mixel_dphy_priv {
+ struct mixel_dphy_cfg cfg;
+ struct regmap *regs;
+ struct clk *phy_ref_clk;
+ const struct mixel_dphy_devdata *devdata;
+};
+
+static const struct regmap_config mixel_dphy_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = DPHY_REG_BYPASS_PLL,
+ .name = "mipi-dphy",
+};
+
+static int phy_write(struct phy *phy, u32 value, unsigned int reg)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = regmap_write(priv->regs, reg, value);
+ if (ret < 0)
+ dev_err(&phy->dev, "Failed to write DPHY reg %d: %d", reg, ret);
+ return ret;
+}
+
+/*
+ * Find a ratio close to the desired one using continued fraction
+ * approximation ending either at exact match or maximum allowed
+ * nominator, denominator.
+ */
+static void get_best_ratio(u32 *pnum, u32 *pdenom, unsigned int max_n,
+ unsigned int max_d)
+{
+ u32 a = *pnum;
+ u32 b = *pdenom;
+ u32 c;
+ u32 n[] = {0, 1};
+ u32 d[] = {1, 0};
+ u32 whole;
+ unsigned int i = 1;
+
+ while (b) {
+ i ^= 1;
+ whole = a / b;
+ n[i] += (n[i ^ 1] * whole);
+ d[i] += (d[i ^ 1] * whole);
+ if ((n[i] > max_n) || (d[i] > max_d)) {
+ i ^= 1;
+ break;
+ }
+ c = a - (b * whole);
+ a = b;
+ b = c;
+ }
+ *pnum = n[i];
+ *pdenom = d[i];
+}
+
+static int mixel_dphy_config_from_opts(struct phy *phy,
+ struct phy_configure_opts_mipi_dphy *dphy_opts,
+ struct mixel_dphy_cfg *cfg)
+{
+ struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+ unsigned long ref_clk = clk_get_rate(priv->phy_ref_clk);
+ u32 lp_t, numerator, denominator;
+ unsigned long long tmp;
+ u32 n;
+ int i;
+
+ if (dphy_opts->hs_clk_rate > DATA_RATE_MAX_SPEED ||
+ dphy_opts->hs_clk_rate < DATA_RATE_MIN_SPEED)
+ return -EINVAL;
+
+ numerator = dphy_opts->hs_clk_rate;
+ denominator = ref_clk;
+ get_best_ratio(&numerator, &denominator, 255, 256);
+ if (!numerator || !denominator) {
+ dev_err(&phy->dev, "Invalid %d/%d for %ld/%ld\n",
+ numerator, denominator,
+ dphy_opts->hs_clk_rate, ref_clk);
+ return -EINVAL;
+ }
+
+ while ((numerator < 16) && (denominator <= 128)) {
+ numerator <<= 1;
+ denominator <<= 1;
+ }
+ /*
+ * CM ranges between 16 and 255
+ * CN ranges between 1 and 32
+ * CO is power of 2: 1, 2, 4, 8
+ */
+ i = __ffs(denominator);
+ if (i > 3)
+ i = 3;
+ cfg->cn = denominator >> i;
+ cfg->co = 1 << i;
+ cfg->cm = numerator;
+
+ if (cfg->cm < 16 || cfg->cm > 255 ||
+ cfg->cn < 1 || cfg->cn > 32 ||
+ cfg->co < 1 || cfg->co > 8) {
+ dev_err(&phy->dev, "Invalid CM/CN/CO values: %u/%u/%u\n",
+ cfg->cm, cfg->cn, cfg->co);
+ dev_err(&phy->dev, "for hs_clk/ref_clk=%ld/%ld ⩰ %d/%d\n",
+ dphy_opts->hs_clk_rate, ref_clk,
+ numerator, denominator);
+ return -EINVAL;
+ }
+
+ dev_dbg(&phy->dev, "hs_clk/ref_clk=%ld/%ld ⩰ %d/%d\n",
+ dphy_opts->hs_clk_rate, ref_clk, numerator, denominator);
+
+ /* LP clock period */
+ tmp = 1000000000000LL;
+ do_div(tmp, dphy_opts->lp_clk_rate); /* ps */
+ if (tmp > ULONG_MAX)
+ return -EINVAL;
+ else
+ lp_t = tmp;
+ dev_dbg(&phy->dev, "LP clock %lu, period: %u ps\n",
+ dphy_opts->lp_clk_rate, lp_t);
+
+ /* hs_prepare: in lp clock periods */
+ if (2 * dphy_opts->hs_prepare > 5 * lp_t) {
+ dev_err(&phy->dev,
+ "hs_prepare (%u) > 2.5 * lp clock period (%u)",
+ dphy_opts->hs_prepare, lp_t);
+ return -EINVAL;
+ }
+ /* 00: lp_t, 01: 1.5 * lp_t, 10: 2 * lp_t, 11: 2.5 * lp_t */
+ if (dphy_opts->hs_prepare < lp_t) {
+ n = 0;
+ } else {
+ tmp = 2 * (dphy_opts->hs_prepare - lp_t);
+ do_div(tmp, lp_t);
+ n = tmp;
+ }
+ cfg->m_prg_hs_prepare = n;
+
+ /* clk_prepare: in lp clock periods */
+ if (2 * dphy_opts->clk_prepare > 3 * lp_t) {
+ dev_err(&phy->dev,
+ "clk_prepare (%u) > 1.5 * lp clock period (%u)",
+ dphy_opts->clk_prepare, lp_t);
+ return -EINVAL;
+ }
+ /* 00: lp_t, 01: 1.5 * lp_t */
+ cfg->mc_prg_hs_prepare = dphy_opts->clk_prepare > lp_t ? 1 : 0;
+
+ /* hs_zero: formula from NXP BSP */
+ n = (144 * (dphy_opts->hs_clk_rate / 1000000) - 47500) / 10000;
+ cfg->m_prg_hs_zero = n < 1 ? 1 : n;
+
+ /* clk_zero: formula from NXP BSP */
+ n = (34 * (dphy_opts->hs_clk_rate / 1000000) - 2500) / 1000;
+ cfg->mc_prg_hs_zero = n < 1 ? 1 : n;
+
+ /* clk_trail, hs_trail: formula from NXP BSP */
+ n = (103 * (dphy_opts->hs_clk_rate / 1000000) + 10000) / 10000;
+ if (n > 15)
+ n = 15;
+ if (n < 1)
+ n = 1;
+ cfg->m_prg_hs_trail = n;
+ cfg->mc_prg_hs_trail = n;
+
+ /* rxhs_settle: formula from NXP BSP */
+ if (dphy_opts->hs_clk_rate < MBPS(80))
+ cfg->rxhs_settle = 0x0d;
+ else if (dphy_opts->hs_clk_rate < MBPS(90))
+ cfg->rxhs_settle = 0x0c;
+ else if (dphy_opts->hs_clk_rate < MBPS(125))
+ cfg->rxhs_settle = 0x0b;
+ else if (dphy_opts->hs_clk_rate < MBPS(150))
+ cfg->rxhs_settle = 0x0a;
+ else if (dphy_opts->hs_clk_rate < MBPS(225))
+ cfg->rxhs_settle = 0x09;
+ else if (dphy_opts->hs_clk_rate < MBPS(500))
+ cfg->rxhs_settle = 0x08;
+ else
+ cfg->rxhs_settle = 0x07;
+
+ dev_dbg(&phy->dev, "hs_prepare: %u, clk_prepare: %u, "
+ "hs_prepare: %u, clk_prepare: %u, "
+ "hs_trail: %u, clk_trail: %u, "
+ "rxhs_settle: %u\n",
+ cfg->m_prg_hs_prepare, cfg->mc_prg_hs_prepare,
+ cfg->m_prg_hs_zero, cfg->mc_prg_hs_zero,
+ cfg->m_prg_hs_trail, cfg->mc_prg_hs_trail,
+ cfg->rxhs_settle);
+
+ return 0;
+}
+
+static void mixel_phy_set_hs_timings(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+ phy_write(phy, priv->cfg.m_prg_hs_prepare, DPHY_M_PRG_HS_PREPARE);
+ phy_write(phy, priv->cfg.mc_prg_hs_prepare, DPHY_MC_PRG_HS_PREPARE);
+ phy_write(phy, priv->cfg.m_prg_hs_zero, DPHY_M_PRG_HS_ZERO);
+ phy_write(phy, priv->cfg.mc_prg_hs_zero, DPHY_MC_PRG_HS_ZERO);
+ phy_write(phy, priv->cfg.m_prg_hs_trail, DPHY_M_PRG_HS_TRAIL);
+ phy_write(phy, priv->cfg.mc_prg_hs_trail, DPHY_MC_PRG_HS_TRAIL);
+ phy_write(phy, priv->cfg.rxhs_settle, priv->devdata->reg_rxhs_settle);
+}
+
+static int mixel_dphy_set_pll_params(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = dev_get_drvdata(phy->dev.parent);
+
+ if (priv->cfg.cm < 16 || priv->cfg.cm > 255 ||
+ priv->cfg.cn < 1 || priv->cfg.cn > 32 ||
+ priv->cfg.co < 1 || priv->cfg.co > 8) {
+ dev_err(&phy->dev, "Invalid CM/CN/CO values! (%u/%u/%u)\n",
+ priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+ return -EINVAL;
+ }
+ dev_dbg(&phy->dev, "Using CM:%u CN:%u CO:%u\n",
+ priv->cfg.cm, priv->cfg.cn, priv->cfg.co);
+ phy_write(phy, CM(priv->cfg.cm), DPHY_CM);
+ phy_write(phy, CN(priv->cfg.cn), DPHY_CN);
+ phy_write(phy, CO(priv->cfg.co), DPHY_CO);
+ return 0;
+}
+
+static int mixel_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ struct mixel_dphy_cfg cfg = { 0 };
+ int ret;
+
+ ret = mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+ if (ret)
+ return ret;
+
+ /* Update the configuration */
+ memcpy(&priv->cfg, &cfg, sizeof(struct mixel_dphy_cfg));
+
+ phy_write(phy, 0x00, DPHY_LOCK_BYP);
+ phy_write(phy, 0x01, priv->devdata->reg_tx_rcal);
+ phy_write(phy, 0x00, priv->devdata->reg_auto_pd_en);
+ phy_write(phy, 0x02, priv->devdata->reg_rxlprp);
+ phy_write(phy, 0x02, priv->devdata->reg_rxcdrp);
+ phy_write(phy, 0x25, DPHY_TST);
+
+ mixel_phy_set_hs_timings(phy);
+ ret = mixel_dphy_set_pll_params(phy);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int mixel_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts)
+{
+ struct mixel_dphy_cfg cfg = { 0 };
+
+ if (mode != PHY_MODE_MIPI_DPHY)
+ return -EINVAL;
+
+ return mixel_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+}
+
+
+static int mixel_dphy_init(struct phy *phy)
+{
+ phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+ phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+ return 0;
+}
+
+
+static int mixel_dphy_exit(struct phy *phy)
+{
+ phy_write(phy, 0, DPHY_CM);
+ phy_write(phy, 0, DPHY_CN);
+ phy_write(phy, 0, DPHY_CO);
+
+ return 0;
+}
+
+
+static int mixel_dphy_power_on(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+ u32 locked;
+ int ret;
+
+ ret = clk_prepare_enable(priv->phy_ref_clk);
+ if (ret < 0)
+ return ret;
+
+ phy_write(phy, PWR_ON, DPHY_PD_PLL);
+ ret = regmap_read_poll_timeout(priv->regs, DPHY_LOCK, locked,
+ locked, PLL_LOCK_SLEEP,
+ PLL_LOCK_TIMEOUT);
+ if (ret < 0) {
+ dev_err(&phy->dev, "Could not get DPHY lock (%d)!\n", ret);
+ goto clock_disable;
+ }
+ phy_write(phy, PWR_ON, DPHY_PD_DPHY);
+
+ return 0;
+clock_disable:
+ clk_disable_unprepare(priv->phy_ref_clk);
+ return ret;
+}
+
+static int mixel_dphy_power_off(struct phy *phy)
+{
+ struct mixel_dphy_priv *priv = phy_get_drvdata(phy);
+
+ phy_write(phy, PWR_OFF, DPHY_PD_PLL);
+ phy_write(phy, PWR_OFF, DPHY_PD_DPHY);
+
+ clk_disable_unprepare(priv->phy_ref_clk);
+
+ return 0;
+}
+
+
+static const struct phy_ops mixel_dphy_phy_ops = {
+ .init = mixel_dphy_init,
+ .exit = mixel_dphy_exit,
+ .power_on = mixel_dphy_power_on,
+ .power_off = mixel_dphy_power_off,
+ .configure = mixel_dphy_configure,
+ .validate = mixel_dphy_validate,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id mixel_dphy_of_match[] = {
+ { .compatible = "mixel,imx8mq-mipi-dphy",
+ .data = &mixel_dphy_devdata[MIXEL_IMX8MQ] },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, mixel_dphy_of_match);
+
+static int mixel_dphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct phy_provider *phy_provider;
+ struct mixel_dphy_priv *priv;
+ struct resource *res;
+ struct phy *phy;
+ void __iomem *regs;
+
+ if (!np)
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->devdata = of_device_get_match_data(&pdev->dev);
+ if (!priv->devdata)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs)) {
+ dev_err(dev, "Couldn't map the DPHY registers\n");
+ return PTR_ERR(regs);
+ }
+
+ priv->regs = devm_regmap_init_mmio(&pdev->dev, regs,
+ &mixel_dphy_regmap_config);
+ if (IS_ERR(priv->regs)) {
+ dev_err(dev, "Couldn't create the DPHY regmap\n");
+ return PTR_ERR(priv->regs);
+ }
+
+ priv->phy_ref_clk = devm_clk_get(&pdev->dev, "phy_ref");
+ if (IS_ERR(priv->phy_ref_clk)) {
+ dev_err(dev, "No phy_ref clock found\n");
+ return PTR_ERR(priv->phy_ref_clk);
+ }
+ dev_dbg(dev, "phy_ref clock rate: %lu\n",
+ clk_get_rate(priv->phy_ref_clk));
+
+ dev_set_drvdata(dev, priv);
+
+ phy = devm_phy_create(dev, np, &mixel_dphy_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "Failed to create phy %ld\n", PTR_ERR(phy));
+ return PTR_ERR(phy);
+ }
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver mixel_dphy_driver = {
+ .probe = mixel_dphy_probe,
+ .driver = {
+ .name = "mixel-mipi-dphy",
+ .of_match_table = mixel_dphy_of_match,
+ }
+};
+module_platform_driver(mixel_dphy_driver);
+
+MODULE_AUTHOR("NXP Semiconductor");
+MODULE_DESCRIPTION("Mixel MIPI-DSI PHY driver");
+MODULE_LICENSE("GPL v2");
--
2.20.1
Add vendor prefix "mixel" for Mixel Inc. Will be used for a MIPI DSI
PHY driver.
Signed-off-by: Guido Günther <[email protected]>
---
Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 413c6f30ce88..97370889039f 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -249,6 +249,7 @@ mikroe MikroElektronika d.o.o.
minix MINIX Technology Ltd.
miramems MiraMEMS Sensing Technology Co., Ltd.
mitsubishi Mitsubishi Electric Corporation
+mixel Mixel, Inc.
mosaixtech Mosaix Technologies, Inc.
motorola Motorola, Inc.
moxa Moxa Inc.
--
2.20.1
On Wed, Mar 27, 2019 at 09:20:00AM +0100, Guido G?nther wrote:
> Add support for the MIXEL DPHY IP as found in the NXP's i.MX8MQ.
>
> Signed-off-by: Guido G?nther <[email protected]>
> Reviewed-by: Sam Ravnborg <[email protected]>
> ---
> .../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> new file mode 100644
> index 000000000000..d3646580412a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> @@ -0,0 +1,29 @@
> +Mixel DSI PHY for i.MX8
> +
> +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
> +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
> +electrical signals for DSI.
> +
> +Required properties:
> +- compatible: Must be:
> + - "mixel,imx8mq-mipi-dphy"
If you had a fallback for mixel, then it would make sense, but as this
is imx8mq specifc 'fsl' should be the vendor prefix.
> +- clocks: Must contain an entry for each entry in clock-names.
> +- clock-names: Must contain the following entries:
> + - "phy_ref": phandle and specifier referring to the DPHY ref clock
> +- reg: the register range of the PHY controller
> +- #phy-cells: number of cells in PHY, as defined in
> + Documentation/devicetree/bindings/phy/phy-bindings.txt
> + this must be <0>
> +
> +Optional properties:
> +- power-domains: phandle to power domain
> +
> +Example:
> + mipi_dphy: mipi_dphy@30A0030 {
mipi-dphy@... or just dphy@...
> + compatible = "mixel,imx8mq-mipi-dphy";
> + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> + clock-names = "phy_ref";
> + reg = <0x30A00300 0x100>;
> + power-domains = <&pd_mipi0>;
> + #phy-cells = <0>;
> + };
> --
> 2.20.1
>
Am 27.03.19 um 09:19 schrieb Guido Günther:
> Add vendor prefix "mixel" for Mixel Inc. Will be used for a MIPI DSI
> PHY driver.
Nit: s/driver/binding/ (to not be Linux specific)
>
> Signed-off-by: Guido Günther <[email protected]>
> ---
> Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 413c6f30ce88..97370889039f 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -249,6 +249,7 @@ mikroe MikroElektronika d.o.o.
> minix MINIX Technology Ltd.
> miramems MiraMEMS Sensing Technology Co., Ltd.
> mitsubishi Mitsubishi Electric Corporation
> +mixel Mixel, Inc.
> mosaixtech Mosaix Technologies, Inc.
> motorola Motorola, Inc.
> moxa Moxa Inc.
Reviewed-by: Andreas Färber <[email protected]>
in case you still need it for something else in light of Rob's comment.
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Mary Higgins, Sri Rasiah
HRB 21284 (AG Nürnberg)
Hi Andreas,
On Thu, Mar 28, 2019 at 06:04:49PM +0100, Andreas F?rber wrote:
> Am 27.03.19 um 09:19 schrieb Guido G?nther:
> > Add vendor prefix "mixel" for Mixel Inc. Will be used for a MIPI DSI
> > PHY driver.
>
> Nit: s/driver/binding/ (to not be Linux specific)
>
> >
> > Signed-off-by: Guido G?nther <[email protected]>
> > ---
> > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > index 413c6f30ce88..97370889039f 100644
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > @@ -249,6 +249,7 @@ mikroe MikroElektronika d.o.o.
> > minix MINIX Technology Ltd.
> > miramems MiraMEMS Sensing Technology Co., Ltd.
> > mitsubishi Mitsubishi Electric Corporation
> > +mixel Mixel, Inc.
> > mosaixtech Mosaix Technologies, Inc.
> > motorola Motorola, Inc.
> > moxa Moxa Inc.
>
> Reviewed-by: Andreas F?rber <[email protected]>
>
> in case you still need it for something else in light of Rob's comment.
You're righgt, using the fsl, prefix this got obsolete but thanks for
having a look!
-- Guido
Hi Rob,
On Thu, Mar 28, 2019 at 11:57:29AM -0500, Rob Herring wrote:
> On Wed, Mar 27, 2019 at 09:20:00AM +0100, Guido G?nther wrote:
> > Add support for the MIXEL DPHY IP as found in the NXP's i.MX8MQ.
> >
> > Signed-off-by: Guido G?nther <[email protected]>
> > Reviewed-by: Sam Ravnborg <[email protected]>
> > ---
> > .../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++
> > 1 file changed, 29 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> >
> > diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> > new file mode 100644
> > index 000000000000..d3646580412a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
> > @@ -0,0 +1,29 @@
> > +Mixel DSI PHY for i.MX8
> > +
> > +The Mixel MIPI-DSI PHY IP block is e.g. found on i.MX8 platforms (along the
> > +MIPI-DSI IP from Northwest Logic). It represents the physical layer for the
> > +electrical signals for DSI.
> > +
> > +Required properties:
> > +- compatible: Must be:
> > + - "mixel,imx8mq-mipi-dphy"
>
> If you had a fallback for mixel, then it would make sense, but as this
> is imx8mq specifc 'fsl' should be the vendor prefix.
Fixed in v8.
>
> > +- clocks: Must contain an entry for each entry in clock-names.
> > +- clock-names: Must contain the following entries:
> > + - "phy_ref": phandle and specifier referring to the DPHY ref clock
> > +- reg: the register range of the PHY controller
> > +- #phy-cells: number of cells in PHY, as defined in
> > + Documentation/devicetree/bindings/phy/phy-bindings.txt
> > + this must be <0>
> > +
> > +Optional properties:
> > +- power-domains: phandle to power domain
> > +
> > +Example:
> > + mipi_dphy: mipi_dphy@30A0030 {
>
> mipi-dphy@... or just dphy@...
And this one as well.
Thanks for the review!
-- Guido
>
>
> > + compatible = "mixel,imx8mq-mipi-dphy";
> > + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
> > + clock-names = "phy_ref";
> > + reg = <0x30A00300 0x100>;
> > + power-domains = <&pd_mipi0>;
> > + #phy-cells = <0>;
> > + };
> > --
> > 2.20.1
> >
>