Functions are consolidated in SM4450 tlmm driver, also consolidate these
functions in SM4450 tlmm binding file.
Signed-off-by: Tengfei Fan <[email protected]>
---
.../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 51 +++++++------------
1 file changed, 17 insertions(+), 34 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
index bb675c8ec220..449fe442d3b2 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
@@ -72,40 +72,23 @@ $defs:
description:
Specify the alternative function to be configured for the specified
pins.
- enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
- atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
- atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
- jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
- mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
- mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
- phase_flag0, phase_flag1, phase_flag10, phase_flag11,
- phase_flag12, phase_flag13, phase_flag14, phase_flag15,
- phase_flag16, phase_flag17, phase_flag18, phase_flag19,
- phase_flag2, phase_flag20, phase_flag21, phase_flag22,
- phase_flag23, phase_flag24, phase_flag25, phase_flag26,
- phase_flag27, phase_flag28, phase_flag29, phase_flag3,
- phase_flag30, phase_flag31, phase_flag4, phase_flag5,
- phase_flag6, phase_flag7, phase_flag8, phase_flag9,
- pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
- prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
- qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
- qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
- qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
- qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
- qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
- qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
- qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
- qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
- tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
- tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
- uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
- uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
- vsense_trigger ]
+ enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+ cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+ coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+ ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+ gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+ jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+ mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+ pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+ qlink0_enable, qlink0_request, qlink0_wmss_reset,
+ qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+ qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+ tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+ vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat ]
required:
- pins
--
2.17.1
On Wed, 24 Jan 2024 at 04:34, Tengfei Fan <[email protected]> wrote:
>
> Functions are consolidated in SM4450 tlmm driver, also consolidate these
> functions in SM4450 tlmm binding file.
This must be described as a bugfix in schema rather than just "consolidation".
Also:
Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
>
> Signed-off-by: Tengfei Fan <[email protected]>
> ---
> .../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 51 +++++++------------
> 1 file changed, 17 insertions(+), 34 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
> index bb675c8ec220..449fe442d3b2 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
> @@ -72,40 +72,23 @@ $defs:
> description:
> Specify the alternative function to be configured for the specified
> pins.
> - enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
> - atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
> - atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
> - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
> - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
> - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
> - dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
> - jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
> - mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
> - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
> - mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
> - phase_flag0, phase_flag1, phase_flag10, phase_flag11,
> - phase_flag12, phase_flag13, phase_flag14, phase_flag15,
> - phase_flag16, phase_flag17, phase_flag18, phase_flag19,
> - phase_flag2, phase_flag20, phase_flag21, phase_flag22,
> - phase_flag23, phase_flag24, phase_flag25, phase_flag26,
> - phase_flag27, phase_flag28, phase_flag29, phase_flag3,
> - phase_flag30, phase_flag31, phase_flag4, phase_flag5,
> - phase_flag6, phase_flag7, phase_flag8, phase_flag9,
> - pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
> - prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
> - qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
> - qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
> - qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
> - qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
> - qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
> - qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
> - qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
> - qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
> - tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
> - tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
> - uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
> - uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
> - vsense_trigger ]
> + enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
> + cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
> + coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
> + ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
> + gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
> + jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
> + mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
> + pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
> + prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
> + qlink0_enable, qlink0_request, qlink0_wmss_reset,
> + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
> + qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
> + qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
> + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
> + tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
> + tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
> + vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat ]
>
> required:
> - pins
> --
> 2.17.1
>
>
--
With best wishes
Dmitry
On Wed, 24 Jan 2024 10:33:05 +0800, Tengfei Fan wrote:
> Functions are consolidated in SM4450 tlmm driver, also consolidate these
> functions in SM4450 tlmm binding file.
>
> Signed-off-by: Tengfei Fan <[email protected]>
> ---
> .../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 51 +++++++------------
> 1 file changed, 17 insertions(+), 34 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml:83:60: [warning] too many spaces after comma (commas)
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 1/24/2024 11:34 AM, Dmitry Baryshkov wrote:
> On Wed, 24 Jan 2024 at 04:34, Tengfei Fan <[email protected]> wrote:
>>
>> Functions are consolidated in SM4450 tlmm driver, also consolidate these
>> functions in SM4450 tlmm binding file.
>
> This must be described as a bugfix in schema rather than just "consolidation".
>
> Also:
>
> Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl")
I will update this commit message to make commit message clearer.
>
>>
>> Signed-off-by: Tengfei Fan <[email protected]>
>> ---
>> .../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 51 +++++++------------
>> 1 file changed, 17 insertions(+), 34 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>> index bb675c8ec220..449fe442d3b2 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4450-tlmm.yaml
>> @@ -72,40 +72,23 @@ $defs:
>> description:
>> Specify the alternative function to be configured for the specified
>> pins.
>> - enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
>> - atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
>> - atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
>> - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
>> - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
>> - cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
>> - dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
>> - jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
>> - mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
>> - mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
>> - mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
>> - phase_flag0, phase_flag1, phase_flag10, phase_flag11,
>> - phase_flag12, phase_flag13, phase_flag14, phase_flag15,
>> - phase_flag16, phase_flag17, phase_flag18, phase_flag19,
>> - phase_flag2, phase_flag20, phase_flag21, phase_flag22,
>> - phase_flag23, phase_flag24, phase_flag25, phase_flag26,
>> - phase_flag27, phase_flag28, phase_flag29, phase_flag3,
>> - phase_flag30, phase_flag31, phase_flag4, phase_flag5,
>> - phase_flag6, phase_flag7, phase_flag8, phase_flag9,
>> - pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
>> - prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
>> - qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
>> - qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
>> - qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
>> - qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
>> - qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
>> - qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
>> - qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
>> - qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
>> - tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
>> - tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
>> - uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
>> - uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
>> - vsense_trigger ]
>> + enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
>> + cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
>> + coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
>> + ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
>> + gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
>> + jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
>> + mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
>> + pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
>> + prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
>> + qlink0_enable, qlink0_request, qlink0_wmss_reset,
>> + qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
>> + qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
>> + qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
>> + tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
>> + tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
>> + tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
>> + vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat ]
>>
>> required:
>> - pins
>> --
>> 2.17.1
>>
>>
>
>
--
Thx and BRs,
Tengfei Fan