The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
from 0.75V to 0.85V. Increasing the voltage while the AM625 is
running has not been validated by TI, so we provide an overlay so that
people may choose to run at 1.4 GHz if they need the additional
performance.
Signed-off-by: Nathan Morrisson <[email protected]>
---
arch/arm64/boot/dts/ti/Makefile | 3 +++
.../k3-am625-phyboard-lyra-1-4-ghz-opp.dtso | 20 +++++++++++++++++++
2 files changed, 23 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 9a722c2473fb..725f7e44f76d 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -22,6 +22,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dahlia.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-dev.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-mallow.dtb
dtb-$(CONFIG_ARCH_K3) += k3-am625-verdin-wifi-yavia.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
@@ -106,6 +107,8 @@ k3-am625-beagleplay-csi2-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-ov5640.dtbo
k3-am625-beagleplay-csi2-tevi-ov5640-dtbs := k3-am625-beagleplay.dtb \
k3-am625-beagleplay-csi2-tevi-ov5640.dtbo
+k3-am625-phyboard-lyra-1-4-ghz-opp.dtbs := k3-am625-phyboard-lyra-rdk.dtb \
+ k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo
k3-am625-phyboard-lyra-gpio-fan-dtbs := k3-am625-phyboard-lyra-rdk.dtb \
k3-am62x-phyboard-lyra-gpio-fan.dtbo
k3-am625-sk-csi2-imx219-dtbs := k3-am625-sk.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso
new file mode 100644
index 000000000000..6ec6d57ec49c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtso
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2024 PHYTEC America LLC
+ * Author: Nathan Morrisson <[email protected]>
+ */
+
+/dts-v1/;
+/plugin/;
+
+&vdd_core {
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <850000>;
+};
+
+&a53_opp_table {
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-supported-hw = <0x01 0x0004>;
+ };
+};
--
2.25.1
Hi Nathan Morrisson,
On Thu, 25 Apr 2024 15:19:25 -0700, Nathan Morrisson wrote:
> The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
> from 0.75V to 0.85V. Increasing the voltage while the AM625 is
> running has not been validated by TI, so we provide an overlay so that
> people may choose to run at 1.4 GHz if they need the additional
> performance.
>
>
> [...]
I have applied the following to branch ti-k3-dts-next on [1].
Thank you!
[1/1] arm64: dts: ti: am62-phyboard-lyra: Add overlay to increase cpu frequency to 1.4 GHz
commit: 7a5775a3da906dab059b8de60a2b88f6016cb4b8
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh