From: Jacob Chen <[email protected]>
Signed-off-by: Jacob Chen <[email protected]>
---
arch/arm/boot/dts/rk1108.dtsi | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
index 9dccfea..6a06ad7 100644
--- a/arch/arm/boot/dts/rk1108.dtsi
+++ b/arch/arm/boot/dts/rk1108.dtsi
@@ -321,6 +321,31 @@
input-enable;
};
+ sdmmc {
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+
+ sdmmc_cd: sdmmc-cd {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+
+ sdmmc_bus1: sdmmc-bus1 {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
+ <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
+ };
+ };
+
i2c1 {
i2c1_xfer: i2c1-xfer {
rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
--
2.7.4
2016-11-13 16:13 GMT+08:00 Jacob Chen <[email protected]>:
> From: Jacob Chen <[email protected]>
>
> Signed-off-by: Jacob Chen <[email protected]>
> ---
> arch/arm/boot/dts/rk1108.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> index 9dccfea..6a06ad7 100644
> --- a/arch/arm/boot/dts/rk1108.dtsi
> +++ b/arch/arm/boot/dts/rk1108.dtsi
> @@ -321,6 +321,31 @@
> input-enable;
> };
>
> + sdmmc {
> + sdmmc_clk: sdmmc-clk {
> + rockchip,pins = <3 RK_PC4 RK_FUNC_1 &pcfg_pull_none_drv_4ma>;
> + };
> +
> + sdmmc_cmd: sdmmc-cmd {
> + rockchip,pins = <3 RK_PC5 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
> + };
> +
> + sdmmc_cd: sdmmc-cd {
> + rockchip,pins = <0 RK_PA1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
> + };
> +
> + sdmmc_bus1: sdmmc-bus1 {
> + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
> + };
> +
> + sdmmc_bus4: sdmmc-bus4 {
> + rockchip,pins = <3 RK_PC3 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
> + <3 RK_PC2 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
> + <3 RK_PC1 RK_FUNC_1 &pcfg_pull_up_drv_4ma>,
> + <3 RK_PC0 RK_FUNC_1 &pcfg_pull_up_drv_4ma>;
> + };
> + };
> +
> i2c1 {
> i2c1_xfer: i2c1-xfer {
> rockchip,pins = <2 RK_PD3 RK_FUNC_1 &pcfg_pull_up>,
> --
> 2.7.4
>
Those patches are based on andy's patch set "Add basic support for
support for Rockchip RK1108 SOC ", assuming he will include
drive-strength functionality in pinctrl.
From: Jacob Chen <[email protected]>
This patch add sdmmc support for rk1108-evb, now I can load the rootfs
from sdmmc.
Signed-off-by: Jacob Chen <[email protected]>
---
arch/arm/boot/dts/rk1108-evb.dts | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/arch/arm/boot/dts/rk1108-evb.dts b/arch/arm/boot/dts/rk1108-evb.dts
index 3956cff..cea26e5 100644
--- a/arch/arm/boot/dts/rk1108-evb.dts
+++ b/arch/arm/boot/dts/rk1108-evb.dts
@@ -56,6 +56,18 @@
};
};
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <200>;
+ disable-wp;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
@@ -67,3 +79,12 @@
&uart2 {
status = "okay";
};
+
+&pinctrl {
+
+ sdmmc {
+ sdmmc_pwr: sdmmc-pwr {
+ rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_drv_4ma>;
+ };
+ };
+};
--
2.7.4
Am Sonntag, 13. November 2016, 16:13:19 CET schrieb Jacob Chen:
> From: Jacob Chen <[email protected]>
>
> This patch add sdmmc support for rk1108-evb, now I can load the rootfs
> from sdmmc.
>
> Signed-off-by: Jacob Chen <[email protected]>
> ---
> arch/arm/boot/dts/rk1108-evb.dts | 21 +++++++++++++++++++++
> 1 file changed, 21 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk1108-evb.dts
> b/arch/arm/boot/dts/rk1108-evb.dts index 3956cff..cea26e5 100644
> --- a/arch/arm/boot/dts/rk1108-evb.dts
> +++ b/arch/arm/boot/dts/rk1108-evb.dts
> @@ -56,6 +56,18 @@
> };
> };
>
> +&sdmmc {
> + bus-width = <4>;
> + cap-mmc-highspeed;
> + cap-sd-highspeed;
> + card-detect-delay = <200>;
> + disable-wp;
> + num-slots = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
> + status = "okay";
> +};
> +
> &uart0 {
> status = "okay";
> };
> @@ -67,3 +79,12 @@
> &uart2 {
> status = "okay";
> };
> +
> +&pinctrl {
> +
> + sdmmc {
> + sdmmc_pwr: sdmmc-pwr {
> + rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_drv_4ma>;
> + };
the above is unsued, and in general please use a fixed regulator as vmmc, as
all other Rockchip boards do already, so that the mmc core can handle it
itself.
Thanks
Heiko
Am Sonntag, 13. November 2016, 16:13:18 CET schrieb Jacob Chen:
> From: Jacob Chen <[email protected]>
>
> Signed-off-by: Jacob Chen <[email protected]>
> ---
> arch/arm/boot/dts/rk1108.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk1108.dtsi b/arch/arm/boot/dts/rk1108.dtsi
> index 9dccfea..6a06ad7 100644
> --- a/arch/arm/boot/dts/rk1108.dtsi
> +++ b/arch/arm/boot/dts/rk1108.dtsi
> @@ -321,6 +321,31 @@
> input-enable;
> };
>
> + sdmmc {
I've fixed the intendation here (needed tabs instead of spaces) and moved the
block to its alphabetically correct position between i2c and uart nodes and
applied the result to my dts32 branch.
Thanks
Heiko