From: Joel A Fernandes <[email protected]>
A new reg-offset property was added to account for register offsets
in some omap-hsmmc's. Document the new property.
Signed-off-by: Joel A Fernandes <[email protected]>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index 8c8908a..33f4b1e 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,6 +20,9 @@ ti,dual-volt: boolean, supports dual voltage cards
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+reg-offset: Supplementing the common reg property (described in bindings/mmc/mmc.txt),
+some omap-hsmmc's can start an offset from reg but are otherwise identical to others.
+The registers between start to offset are considered reserved.
dmas: List of DMA specifiers with the controller specific format
as described in the generic DMA client binding. A tx and rx
specifier is required.
--
1.7.9.5
On Wed, Jun 26, 2013 at 06:55:01, Fernandes, Joel wrote:
> From: Joel A Fernandes <[email protected]>
>
> A new reg-offset property was added to account for register offsets
> in some omap-hsmmc's. Document the new property.
>
Small nitpick
I usually get feedback that any driver DT changes and the associated
Binding doc update should come in one single patch for better readability.
In this case, I believe it would be patch 1/5 & 5/5
Regards,
Gururaja
> Signed-off-by: Joel A Fernandes <[email protected]>
> ---
> .../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> index 8c8908a..33f4b1e 100644
> --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
> @@ -20,6 +20,9 @@ ti,dual-volt: boolean, supports dual voltage cards
> ti,non-removable: non-removable slot (like eMMC)
> ti,needs-special-reset: Requires a special softreset sequence
> ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
> +reg-offset: Supplementing the common reg property (described in bindings/mmc/mmc.txt),
> +some omap-hsmmc's can start an offset from reg but are otherwise identical to others.
> +The registers between start to offset are considered reserved.
> dmas: List of DMA specifiers with the controller specific format
> as described in the generic DMA client binding. A tx and rx
> specifier is required.
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>