Hi,
On 12/20/23 05:43, Stefan Wahren wrote:
> The commit fcc446c8aa63 ("serial: 8250_bcm2835aux: Add ACPI support")
> dropped the error handling for clock acquiring. But even an optional
> clock needs this.
Right, the call was changed to _optional() during review but the error
handling didn't get put back.
>
> Fixes: fcc446c8aa63 ("serial: 8250_bcm2835aux: Add ACPI support")
> Signed-off-by: Stefan Wahren <[email protected]>
> ---
> drivers/tty/serial/8250/8250_bcm2835aux.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
> index 15a2387a5b25..4f4502fb5454 100644
> --- a/drivers/tty/serial/8250/8250_bcm2835aux.c
> +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
> @@ -119,6 +119,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
>
> /* get the clock - this also enables the HW */
> data->clk = devm_clk_get_optional(&pdev->dev, NULL);
> + if (IS_ERR(data->clk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n");
>
> /* get the interrupt */
> ret = platform_get_irq(pdev, 0);
> --
And on ACPI machines it returns NULL, which passes the error check now,
so it works on an ACPI based pi.
Thanks!
Reviewed-by: Jeremy Linton <[email protected]>
Tested-by: Jeremy Linton <[email protected]>
Hi Jeremy,
Am 10.01.24 um 01:01 schrieb Jeremy Linton:
> Hi,
>
>
> On 12/20/23 05:43, Stefan Wahren wrote:
>> The commit fcc446c8aa63 ("serial: 8250_bcm2835aux: Add ACPI support")
>> dropped the error handling for clock acquiring. But even an optional
>> clock needs this.
>
> Right, the call was changed to _optional() during review but the error
> handling didn't get put back.
>
>>
>> Fixes: fcc446c8aa63 ("serial: 8250_bcm2835aux: Add ACPI support")
>> Signed-off-by: Stefan Wahren <[email protected]>
>> ---
>> drivers/tty/serial/8250/8250_bcm2835aux.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c
>> b/drivers/tty/serial/8250/8250_bcm2835aux.c
>> index 15a2387a5b25..4f4502fb5454 100644
>> --- a/drivers/tty/serial/8250/8250_bcm2835aux.c
>> +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
>> @@ -119,6 +119,8 @@ static int bcm2835aux_serial_probe(struct
>> platform_device *pdev)
>>
>> /* get the clock - this also enables the HW */
>> data->clk = devm_clk_get_optional(&pdev->dev, NULL);
>> + if (IS_ERR(data->clk))
>> + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could
>> not get clk\n");
>>
>> /* get the interrupt */
>> ret = platform_get_irq(pdev, 0);
>> --
>
> And on ACPI machines it returns NULL, which passes the error check
> now, so it works on an ACPI based pi.
>
> Thanks!
>
> Reviewed-by: Jeremy Linton <[email protected]>
> Tested-by: Jeremy Linton <[email protected]>
thanks for testing. The patch is already in linux-next.
Regards