The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
glue on the same Amlogic SoCs.
This is a follow-up of v5 now the DRM patches are applied, the clk & DT changes
remains for a full DSI support on G12A & SM1 platforms.
The DW-MIPI-DSI transceiver + D-PHY are clocked by the GP0 PLL, and the ENCL encoder + VIU
pixel reader by the VCLK2 clock using the HDMI PLL.
The DW-MIPI-DSI transceiver gets this pixel stream as input clocked with the VCLK2 clock.
An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
DW-MIPI-DSI transceiver.
The clock setup has been redesigned to use CCF, a common PLL (GP0) and the VCLK2 clock
path for DSI in preparation of full CCF support and possibly dual display with HDMI.
The change from v5 is that now we use a "VCLK" driver instead of notifier and rely
on CLK_SET_RATE_GATE to ensure the VCLK gate operation are called.
Signed-off-by: Neil Armstrong <[email protected]>
---
Changes in v11:
- Rebased on v6.9-rc1
- Fixed overlay handling/creation
- Link to v10: https://lore.kernel.org/r/20240205-amlogic-v6-4-upstream-dsi-ccf-vim3-v10-0-dc06073d5330@linaro.org
Changes in v10:
- Rename regmap_vclk to meson_clk and add _gate for the gate
- Move COMMON_CLK_MESON_VCLK to following patch
- Remove CLK_SET_RATE_PARENT from g12a_vclk2_sel, keep it only on mipi_dsi_pxclk_sel
- Add more info on commit message to specify how clock setup is designed
- Remove forgotten CLK_IGNORE_UNUSED on g12a_vclk2_input
- Remove useless CLK_SET_RATE_PARENT on g12a_vclk2_div to stop propagatting rate _after_ vclk2_div
- Remove invalid CLK_SET_RATE_GATE on g12a_vclk2 since it's not a divider...
- Drop already applied patches
- move Khadas TS050 changes as an overlay
- Link to v9: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-0-95256ed139e6@linaro.org
Changes in v9:
- Colledte reviewed-bys
- Fixed patches 2 & 4, commit messages and bindings format
- Link to v8: https://lore.kernel.org/r/20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org
Changes in v8:
- Switch vclk clk driver to parm as requested by Jerome
- Added bindings fixes to amlogic,meson-axg-mipi-pcie-analog & amlogic,g12a-mipi-dphy-analog
- Fixed DT errors in vim3 example and MNT Reform DT
- Rebased on next-20231107, successfully tested on VIM3L
- Link to v7: https://lore.kernel.org/r/20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org
Changes in v7:
- Added review tags
- Fixed patch 5 thanks to George
- Link to v6: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v6-0-fd2ac9845472@linaro.org
Changes in v6:
- dropped applied DRM patches
- dropped clk private prefix patches
- rebased on top of 20230607-topic-amlogic-upstream-clkid-public-migration-v2-0-38172d17c27a@linaro.org
- re-ordered/cleaned ENCL patches to match clkid public migration
- Added new "vclk" driver
- uses vclk driver instead of notifier
- cleaned VCLK2 clk flags
- add px_clk gating from DSI driver
- Link to v5: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org
Changes in v5:
- Aded PRIV all the G12 internal clk IDS to simplify public exposing
- Fixed the DSI bindings
- Fixed the DSI HSYNC/VSYNC polarity handling
- Fixed the DSI clock setup
- Fixed the DSI phy timings
- Dropped components for DSI, only keeping it for HDMI
- Added MNT Reform 2 CM4 DT
- Dropped already applied PHY fix
- Link to v4: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org
Changes from v3 at [3]:
- switched all clk setup via CCF
- using single PLL for DSI controller & ENCL encoder
- added ENCL clocks to CCF
- make the VCLK2 clocks configuration by CCF
- fixed probe/bind of DSI controller to work with panels & bridges
- added bit_clk to controller to it can setup the BIT clock aswell
- added fix for components unbind
- added fix for analog phy setup value
- added TS050 timings fix
- dropped previous clk control patch
Changes from v2 at [2]:
- Fixed patch 3
- Added reviews from Jagan
- Rebased on v5.19-rc1
Changes from v1 at [1]:
- fixed DSI host bindings
- add reviewed-by tags for bindings
- moved magic values to defines thanks to Martin's searches
- added proper prefixes to defines
- moved phy_configure to phy_init() dw-mipi-dsi callback
- moved phy_on to a new phy_power_on() dw-mipi-dsi callback
- correctly return phy_init/configure errors to callback returns
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
---
Neil Armstrong (7):
dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
clk: meson: add vclk driver
clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
drm/meson: gate px_clk when setting rate
arm64: meson: g12-common: add the MIPI DSI nodes
arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
arch/arm64/boot/dts/amlogic/Makefile | 5 +
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 70 ++++
.../meson-g12b-bananapi-cm4-mnt-reform2.dts | 384 +++++++++++++++++++++
.../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso | 108 ++++++
drivers/clk/meson/Kconfig | 5 +
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/g12a.c | 72 ++--
drivers/clk/meson/vclk.c | 141 ++++++++
drivers/clk/meson/vclk.h | 51 +++
drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +
11 files changed, 825 insertions(+), 20 deletions(-)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-b8e5217e1f4a
Best regards,
--
Neil Armstrong <[email protected]>
The VCLK and VCLK_DIV clocks have supplementary bits.
The VCLK gate has a "SOFT RESET" bit to toggle after the whole
VCLK sub-tree rate has been set, this is implemented in
the gate enable callback.
The VCLK_DIV clocks as enable and reset bits used to disable
and reset the divider, associated with CLK_SET_RATE_GATE it ensures
the rate is set while the divider is disabled and in reset mode.
The VCLK_DIV enable bit isn't implemented as a gate since it's part
of the divider logic and vendor does this exact sequence to ensure
the divider is correctly set.
Signed-off-by: Neil Armstrong <[email protected]>
---
drivers/clk/meson/Kconfig | 4 ++
drivers/clk/meson/Makefile | 1 +
drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/vclk.h | 51 ++++++++++++++++
4 files changed, 197 insertions(+)
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 29ffd14d267b..8a9823789fa3 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
tristate
select COMMON_CLK_MESON_REGMAP
+config COMMON_CLK_MESON_VCLK
+ tristate
+ select COMMON_CLK_MESON_REGMAP
+
config COMMON_CLK_MESON_CLKC_UTILS
tristate
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 9ee4b954c896..9ba43fe7a07a 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
+obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
# Amlogic Clock controllers
diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
new file mode 100644
index 000000000000..3ea813a0a995
--- /dev/null
+++ b/drivers/clk/meson/vclk.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024 Neil Armstrong <[email protected]>
+ */
+
+#include <linux/module.h>
+#include "vclk.h"
+
+/* The VCLK gate has a supplementary reset bit to pulse after ungating */
+
+static inline struct meson_vclk_gate_data *
+clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
+{
+ return (struct meson_vclk_gate_data *)clk->data;
+}
+
+static int meson_vclk_gate_enable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+ meson_parm_write(clk->map, &vclk->enable, 1);
+
+ /* Do a reset pulse */
+ meson_parm_write(clk->map, &vclk->reset, 1);
+ meson_parm_write(clk->map, &vclk->reset, 0);
+
+ return 0;
+}
+
+static void meson_vclk_gate_disable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+ meson_parm_write(clk->map, &vclk->enable, 0);
+}
+
+static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
+
+ return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_gate_ops = {
+ .enable = meson_vclk_gate_enable,
+ .disable = meson_vclk_gate_disable,
+ .is_enabled = meson_vclk_gate_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
+
+/* The VCLK Divider has supplementary reset & enable bits */
+
+static inline struct meson_vclk_div_data *
+clk_get_meson_vclk_div_data(struct clk_regmap *clk)
+{
+ return (struct meson_vclk_div_data *)clk->data;
+}
+
+static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long prate)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
+ vclk->table, vclk->flags, vclk->div.width);
+}
+
+static int meson_vclk_div_determine_rate(struct clk_hw *hw,
+ struct clk_rate_request *req)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
+ vclk->flags);
+}
+
+static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+ int ret;
+
+ ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
+ vclk->flags);
+ if (ret < 0)
+ return ret;
+
+ meson_parm_write(clk->map, &vclk->div, ret);
+
+ return 0;
+};
+
+static int meson_vclk_div_enable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ /* Unreset the divider when ungating */
+ meson_parm_write(clk->map, &vclk->reset, 0);
+ meson_parm_write(clk->map, &vclk->enable, 1);
+
+ return 0;
+}
+
+static void meson_vclk_div_disable(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ /* Reset the divider when gating */
+ meson_parm_write(clk->map, &vclk->enable, 0);
+ meson_parm_write(clk->map, &vclk->reset, 1);
+}
+
+static int meson_vclk_div_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
+
+ return meson_parm_read(clk->map, &vclk->enable);
+}
+
+const struct clk_ops meson_vclk_div_ops = {
+ .recalc_rate = meson_vclk_div_recalc_rate,
+ .determine_rate = meson_vclk_div_determine_rate,
+ .set_rate = meson_vclk_div_set_rate,
+ .enable = meson_vclk_div_enable,
+ .disable = meson_vclk_div_disable,
+ .is_enabled = meson_vclk_div_is_enabled,
+};
+EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
+
+MODULE_DESCRIPTION("Amlogic vclk clock driver");
+MODULE_AUTHOR("Neil Armstrong <[email protected]>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
new file mode 100644
index 000000000000..20b0b181db09
--- /dev/null
+++ b/drivers/clk/meson/vclk.h
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2024 Neil Armstrong <[email protected]>
+ */
+
+#ifndef __VCLK_H
+#define __VCLK_H
+
+#include "clk-regmap.h"
+#include "parm.h"
+
+/**
+ * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
+ *
+ * @enable: vclk enable field
+ * @reset: vclk reset field
+ * @flags: hardware-specific flags
+ *
+ * Flags:
+ * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_gate_data {
+ struct parm enable;
+ struct parm reset;
+ u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_gate_ops;
+
+/**
+ * struct meson_vclk_div_data - vclk_div regmap back specific data
+ *
+ * @div: divider field
+ * @enable: vclk divider enable field
+ * @reset: vclk divider reset field
+ * @table: array of value/divider pairs, last entry should have div = 0
+ *
+ * Flags:
+ * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
+ */
+struct meson_vclk_div_data {
+ struct parm div;
+ struct parm enable;
+ struct parm reset;
+ const struct clk_div_table *table;
+ u8 flags;
+};
+
+extern const struct clk_ops meson_vclk_div_ops;
+
+#endif /* __VCLK_H */
--
2.34.1
On Mon, 25 Mar 2024 12:09:46 +0100, Neil Armstrong wrote:
> The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
> with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
> glue on the same Amlogic SoCs.
>
> This is a follow-up of v5 now the DRM patches are applied, the clk & DT changes
> remains for a full DSI support on G12A & SM1 platforms.
>
> The DW-MIPI-DSI transceiver + D-PHY are clocked by the GP0 PLL, and the ENCL encoder + VIU
> pixel reader by the VCLK2 clock using the HDMI PLL.
>
> The DW-MIPI-DSI transceiver gets this pixel stream as input clocked with the VCLK2 clock.
>
> An optional "MEAS" clock can be enabled to measure the delay between each vsync feeding the
> DW-MIPI-DSI transceiver.
>
> The clock setup has been redesigned to use CCF, a common PLL (GP0) and the VCLK2 clock
> path for DSI in preparation of full CCF support and possibly dual display with HDMI.
>
> The change from v5 is that now we use a "VCLK" driver instead of notifier and rely
> on CLK_SET_RATE_GATE to ensure the VCLK gate operation are called.
>
> Signed-off-by: Neil Armstrong <[email protected]>
> ---
> Changes in v11:
> - Rebased on v6.9-rc1
> - Fixed overlay handling/creation
> - Link to v10: https://lore.kernel.org/r/20240205-amlogic-v6-4-upstream-dsi-ccf-vim3-v10-0-dc06073d5330@linaro.org
>
> Changes in v10:
> - Rename regmap_vclk to meson_clk and add _gate for the gate
> - Move COMMON_CLK_MESON_VCLK to following patch
> - Remove CLK_SET_RATE_PARENT from g12a_vclk2_sel, keep it only on mipi_dsi_pxclk_sel
> - Add more info on commit message to specify how clock setup is designed
> - Remove forgotten CLK_IGNORE_UNUSED on g12a_vclk2_input
> - Remove useless CLK_SET_RATE_PARENT on g12a_vclk2_div to stop propagatting rate _after_ vclk2_div
> - Remove invalid CLK_SET_RATE_GATE on g12a_vclk2 since it's not a divider...
> - Drop already applied patches
> - move Khadas TS050 changes as an overlay
> - Link to v9: https://lore.kernel.org/r/20231124-amlogic-v6-4-upstream-dsi-ccf-vim3-v9-0-95256ed139e6@linaro.org
>
> Changes in v9:
> - Colledte reviewed-bys
> - Fixed patches 2 & 4, commit messages and bindings format
> - Link to v8: https://lore.kernel.org/r/20231109-amlogic-v6-4-upstream-dsi-ccf-vim3-v8-0-81e4aeeda193@linaro.org
>
> Changes in v8:
> - Switch vclk clk driver to parm as requested by Jerome
> - Added bindings fixes to amlogic,meson-axg-mipi-pcie-analog & amlogic,g12a-mipi-dphy-analog
> - Fixed DT errors in vim3 example and MNT Reform DT
> - Rebased on next-20231107, successfully tested on VIM3L
> - Link to v7: https://lore.kernel.org/r/20230803-amlogic-v6-4-upstream-dsi-ccf-vim3-v7-0-762219fc5b28@linaro.org
>
> Changes in v7:
> - Added review tags
> - Fixed patch 5 thanks to George
> - Link to v6: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v6-0-fd2ac9845472@linaro.org
>
> Changes in v6:
> - dropped applied DRM patches
> - dropped clk private prefix patches
> - rebased on top of 20230607-topic-amlogic-upstream-clkid-public-migration-v2-0-38172d17c27a@linaro.org
> - re-ordered/cleaned ENCL patches to match clkid public migration
> - Added new "vclk" driver
> - uses vclk driver instead of notifier
> - cleaned VCLK2 clk flags
> - add px_clk gating from DSI driver
> - Link to v5: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v5-0-56eb7a4d5b8e@linaro.org
>
> Changes in v5:
> - Aded PRIV all the G12 internal clk IDS to simplify public exposing
> - Fixed the DSI bindings
> - Fixed the DSI HSYNC/VSYNC polarity handling
> - Fixed the DSI clock setup
> - Fixed the DSI phy timings
> - Dropped components for DSI, only keeping it for HDMI
> - Added MNT Reform 2 CM4 DT
> - Dropped already applied PHY fix
> - Link to v4: https://lore.kernel.org/r/20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-v4-0-2592c29ea263@linaro.org
>
> Changes from v3 at [3]:
> - switched all clk setup via CCF
> - using single PLL for DSI controller & ENCL encoder
> - added ENCL clocks to CCF
> - make the VCLK2 clocks configuration by CCF
> - fixed probe/bind of DSI controller to work with panels & bridges
> - added bit_clk to controller to it can setup the BIT clock aswell
> - added fix for components unbind
> - added fix for analog phy setup value
> - added TS050 timings fix
> - dropped previous clk control patch
>
> Changes from v2 at [2]:
> - Fixed patch 3
> - Added reviews from Jagan
> - Rebased on v5.19-rc1
>
> Changes from v1 at [1]:
> - fixed DSI host bindings
> - add reviewed-by tags for bindings
> - moved magic values to defines thanks to Martin's searches
> - added proper prefixes to defines
> - moved phy_configure to phy_init() dw-mipi-dsi callback
> - moved phy_on to a new phy_power_on() dw-mipi-dsi callback
> - correctly return phy_init/configure errors to callback returns
>
> [1] https://lore.kernel.org/r/[email protected]
> [2] https://lore.kernel.org/r/[email protected]
> [3] https://lore.kernel.org/r/[email protected]
>
> ---
> Neil Armstrong (7):
> dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
> clk: meson: add vclk driver
> clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
> drm/meson: gate px_clk when setting rate
> arm64: meson: g12-common: add the MIPI DSI nodes
> arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
> arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
>
> Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
> arch/arm64/boot/dts/amlogic/Makefile | 5 +
> arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 70 ++++
> .../meson-g12b-bananapi-cm4-mnt-reform2.dts | 384 +++++++++++++++++++++
> .../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso | 108 ++++++
> drivers/clk/meson/Kconfig | 5 +
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/g12a.c | 72 ++--
> drivers/clk/meson/vclk.c | 141 ++++++++
> drivers/clk/meson/vclk.h | 51 +++
> drivers/gpu/drm/meson/meson_dw_mipi_dsi.c | 7 +
> 11 files changed, 825 insertions(+), 20 deletions(-)
> ---
> base-commit: 4cece764965020c22cff7665b18a012006359095
> change-id: 20230512-amlogic-v6-4-upstream-dsi-ccf-vim3-b8e5217e1f4a
>
> Best regards,
> --
> Neil Armstrong <[email protected]>
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
New warnings running 'make CHECK_DTBS=y amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dtb' for 20240325-amlogic-v6-4-upstream-dsi-ccf-vim3-v11-0-04f55de44604@linaro.org:
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dtb: /soc/bus@ff600000/bus@42000/clock-controller@0: failed to match any schema with compatible: ['amlogic,g12a-audio-clkc']
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dtb: /soc/bus@ff600000/bus@42000/audio-controller@744: failed to match any schema with compatible: ['amlogic,g12a-tohdmitx']
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dtb: sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dtb: sound: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
from schema $id: http://devicetree.org/schemas/sound/amlogic,axg-sound-card.yaml#
arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-mnt-reform2.dtb: sound: 'anyOf' conditional failed, one must be fixed:
'clocks' is a required property
'#clock-cells' is a required property
from schema $id: http://devicetree.org/schemas/clock/clock.yaml#
On Mon 25 Mar 2024 at 12:09, Neil Armstrong <[email protected]> wrote:
> The VCLK and VCLK_DIV clocks have supplementary bits.
>
> The VCLK gate has a "SOFT RESET" bit to toggle after the whole
> VCLK sub-tree rate has been set, this is implemented in
> the gate enable callback.
>
> The VCLK_DIV clocks as enable and reset bits used to disable
> and reset the divider, associated with CLK_SET_RATE_GATE it ensures
> the rate is set while the divider is disabled and in reset mode.
>
> The VCLK_DIV enable bit isn't implemented as a gate since it's part
> of the divider logic and vendor does this exact sequence to ensure
> the divider is correctly set.
checkpatch reports a few easy CHECKs and one WARNING.
Could you please fix these ?
Other than that, It looks OK.
>
> Signed-off-by: Neil Armstrong <[email protected]>
> ---
> drivers/clk/meson/Kconfig | 4 ++
> drivers/clk/meson/Makefile | 1 +
> drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
> drivers/clk/meson/vclk.h | 51 ++++++++++++++++
> 4 files changed, 197 insertions(+)
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index 29ffd14d267b..8a9823789fa3 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
> tristate
> select COMMON_CLK_MESON_REGMAP
>
> +config COMMON_CLK_MESON_VCLK
> + tristate
> + select COMMON_CLK_MESON_REGMAP
> +
> config COMMON_CLK_MESON_CLKC_UTILS
> tristate
>
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index 9ee4b954c896..9ba43fe7a07a 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
> obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
> obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
> obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
>
> # Amlogic Clock controllers
>
> diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
> new file mode 100644
> index 000000000000..3ea813a0a995
> --- /dev/null
> +++ b/drivers/clk/meson/vclk.c
> @@ -0,0 +1,141 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2024 Neil Armstrong <[email protected]>
> + */
> +
> +#include <linux/module.h>
> +#include "vclk.h"
> +
> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */
> +
> +static inline struct meson_vclk_gate_data *
> +clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
> +{
> + return (struct meson_vclk_gate_data *)clk->data;
> +}
> +
> +static int meson_vclk_gate_enable(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
> +
> + meson_parm_write(clk->map, &vclk->enable, 1);
> +
> + /* Do a reset pulse */
> + meson_parm_write(clk->map, &vclk->reset, 1);
> + meson_parm_write(clk->map, &vclk->reset, 0);
> +
> + return 0;
> +}
> +
> +static void meson_vclk_gate_disable(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
> +
> + meson_parm_write(clk->map, &vclk->enable, 0);
> +}
> +
> +static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
> +
> + return meson_parm_read(clk->map, &vclk->enable);
> +}
> +
> +const struct clk_ops meson_vclk_gate_ops = {
> + .enable = meson_vclk_gate_enable,
> + .disable = meson_vclk_gate_disable,
> + .is_enabled = meson_vclk_gate_is_enabled,
> +};
> +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
> +
> +/* The VCLK Divider has supplementary reset & enable bits */
> +
> +static inline struct meson_vclk_div_data *
> +clk_get_meson_vclk_div_data(struct clk_regmap *clk)
> +{
> + return (struct meson_vclk_div_data *)clk->data;
> +}
> +
> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
> + unsigned long prate)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> + return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
> + vclk->table, vclk->flags, vclk->div.width);
> +}
> +
> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> + return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
> + vclk->flags);
> +}
> +
> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> + int ret;
> +
> + ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
> + vclk->flags);
> + if (ret < 0)
> + return ret;
> +
> + meson_parm_write(clk->map, &vclk->div, ret);
> +
> + return 0;
> +};
> +
> +static int meson_vclk_div_enable(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> + /* Unreset the divider when ungating */
> + meson_parm_write(clk->map, &vclk->reset, 0);
> + meson_parm_write(clk->map, &vclk->enable, 1);
> +
> + return 0;
> +}
> +
> +static void meson_vclk_div_disable(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> + /* Reset the divider when gating */
> + meson_parm_write(clk->map, &vclk->enable, 0);
> + meson_parm_write(clk->map, &vclk->reset, 1);
> +}
> +
> +static int meson_vclk_div_is_enabled(struct clk_hw *hw)
> +{
> + struct clk_regmap *clk = to_clk_regmap(hw);
> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
> +
> + return meson_parm_read(clk->map, &vclk->enable);
> +}
> +
> +const struct clk_ops meson_vclk_div_ops = {
> + .recalc_rate = meson_vclk_div_recalc_rate,
> + .determine_rate = meson_vclk_div_determine_rate,
> + .set_rate = meson_vclk_div_set_rate,
> + .enable = meson_vclk_div_enable,
> + .disable = meson_vclk_div_disable,
> + .is_enabled = meson_vclk_div_is_enabled,
> +};
> +EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
> +
> +MODULE_DESCRIPTION("Amlogic vclk clock driver");
> +MODULE_AUTHOR("Neil Armstrong <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
> new file mode 100644
> index 000000000000..20b0b181db09
> --- /dev/null
> +++ b/drivers/clk/meson/vclk.h
> @@ -0,0 +1,51 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2024 Neil Armstrong <[email protected]>
> + */
> +
> +#ifndef __VCLK_H
> +#define __VCLK_H
> +
> +#include "clk-regmap.h"
> +#include "parm.h"
> +
> +/**
> + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
> + *
> + * @enable: vclk enable field
> + * @reset: vclk reset field
> + * @flags: hardware-specific flags
> + *
> + * Flags:
> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
> + */
> +struct meson_vclk_gate_data {
> + struct parm enable;
> + struct parm reset;
> + u8 flags;
> +};
> +
> +extern const struct clk_ops meson_vclk_gate_ops;
> +
> +/**
> + * struct meson_vclk_div_data - vclk_div regmap back specific data
> + *
> + * @div: divider field
> + * @enable: vclk divider enable field
> + * @reset: vclk divider reset field
> + * @table: array of value/divider pairs, last entry should have div = 0
> + *
> + * Flags:
> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
> + */
> +struct meson_vclk_div_data {
> + struct parm div;
> + struct parm enable;
> + struct parm reset;
> + const struct clk_div_table *table;
> + u8 flags;
> +};
> +
> +extern const struct clk_ops meson_vclk_div_ops;
> +
> +#endif /* __VCLK_H */
--
Jerome
On 29/03/2024 13:33, Jerome Brunet wrote:
>
> On Mon 25 Mar 2024 at 12:09, Neil Armstrong <[email protected]> wrote:
>
>> The VCLK and VCLK_DIV clocks have supplementary bits.
>>
>> The VCLK gate has a "SOFT RESET" bit to toggle after the whole
>> VCLK sub-tree rate has been set, this is implemented in
>> the gate enable callback.
>>
>> The VCLK_DIV clocks as enable and reset bits used to disable
>> and reset the divider, associated with CLK_SET_RATE_GATE it ensures
>> the rate is set while the divider is disabled and in reset mode.
>>
>> The VCLK_DIV enable bit isn't implemented as a gate since it's part
>> of the divider logic and vendor does this exact sequence to ensure
>> the divider is correctly set.
>
> checkpatch reports a few easy CHECKs and one WARNING.
> Could you please fix these ?
>
> Other than that, It looks OK.
Ack
thx
Neil
>
>>
>> Signed-off-by: Neil Armstrong <[email protected]>
>> ---
>> drivers/clk/meson/Kconfig | 4 ++
>> drivers/clk/meson/Makefile | 1 +
>> drivers/clk/meson/vclk.c | 141 +++++++++++++++++++++++++++++++++++++++++++++
>> drivers/clk/meson/vclk.h | 51 ++++++++++++++++
>> 4 files changed, 197 insertions(+)
>>
>> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> index 29ffd14d267b..8a9823789fa3 100644
>> --- a/drivers/clk/meson/Kconfig
>> +++ b/drivers/clk/meson/Kconfig
>> @@ -30,6 +30,10 @@ config COMMON_CLK_MESON_VID_PLL_DIV
>> tristate
>> select COMMON_CLK_MESON_REGMAP
>>
>> +config COMMON_CLK_MESON_VCLK
>> + tristate
>> + select COMMON_CLK_MESON_REGMAP
>> +
>> config COMMON_CLK_MESON_CLKC_UTILS
>> tristate
>>
>> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> index 9ee4b954c896..9ba43fe7a07a 100644
>> --- a/drivers/clk/meson/Makefile
>> +++ b/drivers/clk/meson/Makefile
>> @@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_PLL) += clk-pll.o
>> obj-$(CONFIG_COMMON_CLK_MESON_REGMAP) += clk-regmap.o
>> obj-$(CONFIG_COMMON_CLK_MESON_SCLK_DIV) += sclk-div.o
>> obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
>> +obj-$(CONFIG_COMMON_CLK_MESON_VCLK) += vclk.o
>>
>> # Amlogic Clock controllers
>>
>> diff --git a/drivers/clk/meson/vclk.c b/drivers/clk/meson/vclk.c
>> new file mode 100644
>> index 000000000000..3ea813a0a995
>> --- /dev/null
>> +++ b/drivers/clk/meson/vclk.c
>> @@ -0,0 +1,141 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2024 Neil Armstrong <[email protected]>
>> + */
>> +
>> +#include <linux/module.h>
>> +#include "vclk.h"
>> +
>> +/* The VCLK gate has a supplementary reset bit to pulse after ungating */
>> +
>> +static inline struct meson_vclk_gate_data *
>> +clk_get_meson_vclk_gate_data(struct clk_regmap *clk)
>> +{
>> + return (struct meson_vclk_gate_data *)clk->data;
>> +}
>> +
>> +static int meson_vclk_gate_enable(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>> +
>> + meson_parm_write(clk->map, &vclk->enable, 1);
>> +
>> + /* Do a reset pulse */
>> + meson_parm_write(clk->map, &vclk->reset, 1);
>> + meson_parm_write(clk->map, &vclk->reset, 0);
>> +
>> + return 0;
>> +}
>> +
>> +static void meson_vclk_gate_disable(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>> +
>> + meson_parm_write(clk->map, &vclk->enable, 0);
>> +}
>> +
>> +static int meson_vclk_gate_is_enabled(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_gate_data *vclk = clk_get_meson_vclk_gate_data(clk);
>> +
>> + return meson_parm_read(clk->map, &vclk->enable);
>> +}
>> +
>> +const struct clk_ops meson_vclk_gate_ops = {
>> + .enable = meson_vclk_gate_enable,
>> + .disable = meson_vclk_gate_disable,
>> + .is_enabled = meson_vclk_gate_is_enabled,
>> +};
>> +EXPORT_SYMBOL_GPL(meson_vclk_gate_ops);
>> +
>> +/* The VCLK Divider has supplementary reset & enable bits */
>> +
>> +static inline struct meson_vclk_div_data *
>> +clk_get_meson_vclk_div_data(struct clk_regmap *clk)
>> +{
>> + return (struct meson_vclk_div_data *)clk->data;
>> +}
>> +
>> +static unsigned long meson_vclk_div_recalc_rate(struct clk_hw *hw,
>> + unsigned long prate)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>> +
>> + return divider_recalc_rate(hw, prate, meson_parm_read(clk->map, &vclk->div),
>> + vclk->table, vclk->flags, vclk->div.width);
>> +}
>> +
>> +static int meson_vclk_div_determine_rate(struct clk_hw *hw,
>> + struct clk_rate_request *req)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>> +
>> + return divider_determine_rate(hw, req, vclk->table, vclk->div.width,
>> + vclk->flags);
>> +}
>> +
>> +static int meson_vclk_div_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long parent_rate)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>> + int ret;
>> +
>> + ret = divider_get_val(rate, parent_rate, vclk->table, vclk->div.width,
>> + vclk->flags);
>> + if (ret < 0)
>> + return ret;
>> +
>> + meson_parm_write(clk->map, &vclk->div, ret);
>> +
>> + return 0;
>> +};
>> +
>> +static int meson_vclk_div_enable(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>> +
>> + /* Unreset the divider when ungating */
>> + meson_parm_write(clk->map, &vclk->reset, 0);
>> + meson_parm_write(clk->map, &vclk->enable, 1);
>> +
>> + return 0;
>> +}
>> +
>> +static void meson_vclk_div_disable(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>> +
>> + /* Reset the divider when gating */
>> + meson_parm_write(clk->map, &vclk->enable, 0);
>> + meson_parm_write(clk->map, &vclk->reset, 1);
>> +}
>> +
>> +static int meson_vclk_div_is_enabled(struct clk_hw *hw)
>> +{
>> + struct clk_regmap *clk = to_clk_regmap(hw);
>> + struct meson_vclk_div_data *vclk = clk_get_meson_vclk_div_data(clk);
>> +
>> + return meson_parm_read(clk->map, &vclk->enable);
>> +}
>> +
>> +const struct clk_ops meson_vclk_div_ops = {
>> + .recalc_rate = meson_vclk_div_recalc_rate,
>> + .determine_rate = meson_vclk_div_determine_rate,
>> + .set_rate = meson_vclk_div_set_rate,
>> + .enable = meson_vclk_div_enable,
>> + .disable = meson_vclk_div_disable,
>> + .is_enabled = meson_vclk_div_is_enabled,
>> +};
>> +EXPORT_SYMBOL_GPL(meson_vclk_div_ops);
>> +
>> +MODULE_DESCRIPTION("Amlogic vclk clock driver");
>> +MODULE_AUTHOR("Neil Armstrong <[email protected]>");
>> +MODULE_LICENSE("GPL v2");
>> diff --git a/drivers/clk/meson/vclk.h b/drivers/clk/meson/vclk.h
>> new file mode 100644
>> index 000000000000..20b0b181db09
>> --- /dev/null
>> +++ b/drivers/clk/meson/vclk.h
>> @@ -0,0 +1,51 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright (c) 2024 Neil Armstrong <[email protected]>
>> + */
>> +
>> +#ifndef __VCLK_H
>> +#define __VCLK_H
>> +
>> +#include "clk-regmap.h"
>> +#include "parm.h"
>> +
>> +/**
>> + * struct meson_vclk_gate_data - vclk_gate regmap backed specific data
>> + *
>> + * @enable: vclk enable field
>> + * @reset: vclk reset field
>> + * @flags: hardware-specific flags
>> + *
>> + * Flags:
>> + * Same as clk_gate except CLK_GATE_HIWORD_MASK which is ignored
>> + */
>> +struct meson_vclk_gate_data {
>> + struct parm enable;
>> + struct parm reset;
>> + u8 flags;
>> +};
>> +
>> +extern const struct clk_ops meson_vclk_gate_ops;
>> +
>> +/**
>> + * struct meson_vclk_div_data - vclk_div regmap back specific data
>> + *
>> + * @div: divider field
>> + * @enable: vclk divider enable field
>> + * @reset: vclk divider reset field
>> + * @table: array of value/divider pairs, last entry should have div = 0
>> + *
>> + * Flags:
>> + * Same as clk_divider except CLK_DIVIDER_HIWORD_MASK which is ignored
>> + */
>> +struct meson_vclk_div_data {
>> + struct parm div;
>> + struct parm enable;
>> + struct parm reset;
>> + const struct clk_div_table *table;
>> + u8 flags;
>> +};
>> +
>> +extern const struct clk_ops meson_vclk_div_ops;
>> +
>> +#endif /* __VCLK_H */
>
>
Hi,
On Mon, 25 Mar 2024 12:09:46 +0100, Neil Armstrong wrote:
> The Amlogic G12A, G12B & SM1 SoCs embeds a Synopsys DW-MIPI-DSI transceiver (ver 1.21a),
> with a custom glue managing the IP resets, clock and data input similar to the DW-HDMI
> glue on the same Amlogic SoCs.
>
> This is a follow-up of v5 now the DRM patches are applied, the clk & DT changes
> remains for a full DSI support on G12A & SM1 platforms.
>
> [...]
Thanks, Applied to https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git (v6.10/arm64-dt)
[1/7] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module
https://git.kernel.org/amlogic/c/ef5a84d716042871599ff7c8ff571a6390b99718
[2/7] clk: meson: add vclk driver
(no commit info)
[3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
(no commit info)
[4/7] drm/meson: gate px_clk when setting rate
(no commit info)
[5/7] arm64: meson: g12-common: add the MIPI DSI nodes
https://git.kernel.org/amlogic/c/6f1c2a12ed1138c3e680935718672d361afee372
[6/7] arm64: meson: khadas-vim3l: add TS050 DSI panel overlay
https://git.kernel.org/amlogic/c/2a885bad5ba4d553758d3f1689000cee8e6dae87
[7/7] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper
https://git.kernel.org/amlogic/c/fde2d69c1626bebb3a8851909c912e582db1ca95
These changes has been applied on the intermediate git tree [1].
The v6.10/arm64-dt branch will then be sent via a formal Pull Request to the Linux SoC maintainers
for inclusion in their intermediate git branches in order to be sent to Linus during
the next merge window, or sooner if it's a set of fixes.
In the cases of fixes, those will be merged in the current release candidate
kernel and as soon they appear on the Linux master branch they will be
backported to the previous Stable and Long-Stable kernels [2].
The intermediate git branches are merged daily in the linux-next tree [3],
people are encouraged testing these pre-release kernels and report issues on the
relevant mailing-lists.
If problems are discovered on those changes, please submit a signed-off-by revert
patch followed by a corrective changeset.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
[3] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
--
Neil