Hello,
With 2.4.10-ac7 no problems at all, but with 2.4.13-ac[246] (not tested the other
ones), compiled either with gcc-2.96 from Mandrake or gcc-3.02 also from Mandrake,
on the first power on of my computer, ends so:
scsi0:A:0:0: Tagged Queuing enabled. Depth 64
scsi1: brkadrint, Scratch or SCB Memory Parity Error at seqaddr = 0x1
scsi1: Dumping Card State while idle, at SEQADDR 0x1
ACCUM = 0x3, SINDEX = 0x20, DINDEX = 0xc0, ARG_2 = 0x0
HCNT = 0x0
SCSIEQ = 0x12, SBLKCTL = 0x0
DFCNTRL = 0x4, DFSTATUS = 0x6d
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x80
SSTAT0 = 0x5, SSTAT1 = 0x0
STACK == 0x17, 0x186, 0x0, 0x0
SCB count =4
Kernel NEXTQSCB =2
Card NEXTQSCB =2
QINFIFO entries:
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries:
Sequencer Free SCB List: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Pending list:
Kernel Free SCB list: 3 1 0
scsi1:0:1:0: Attempting to queue an ABORT message
scsi1: Dumping Card State while idle, at SEQADDR 0x18
ACCUM = 0x0, SINDEX = 0x0, DINDEX = 0x0, ARG_2 = 0x0
HCNT = 0x0
SCSIEQ = 0x0, SBLKCTL = 0xc0
DFCNTRL = 0x0, DFSTATUS = 0x29
LASTPHASE = 0x1, SCSISIGI = 0x0, SXFRCTL0 = 0x0
SSTAT0 = 0x0, SSTAT1 = 0x8
STACK == 0x17, 0x0, 0x0, 0x0
SCB count = 4
Kernel NEXTQSCB = 3
Card NEXTQSCB = 0
QINFIFO entries: 3 2
Waiting Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255
Disconnected Queue entries: 0:255 1:255 2:255 3:255 4:255 5:255 6:255 7:255 8:255 9:255 10:255 11:255 12:255 13:255 14:255 15:255
QOUTFIFO entries:
Sequencer Free SCB list: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Pending list: 2
Kernel Free SCB list: 1 0
Untagged Q(1): 2
DevQ(0:1:0): 0 waiting
qinpos =0, SCB index +3
Kernel panic: Loop 1
And if I reboot, no more problem:
v 4 13:53:38 localhost syslogd 1.4-0: restart (remote reception).
Nov 4 13:53:38 localhost kernel: klogd 1.4-0, log source = /proc/kmsg started.
Nov 4 13:53:38 localhost kernel: Inspecting /boot/System.map-2.4.13-ac6
Nov 4 13:53:39 localhost random: Initializing random number generator: succeeded
Nov 4 13:53:39 localhost kernel: Loaded 16503 symbols from /boot/System.map-2.4.13-ac6.
Nov 4 13:53:39 localhost kernel: Symbols match kernel version 2.4.13.
Nov 4 13:53:39 localhost kernel: Loaded 6 symbols from 1 module.
Nov 4 13:53:39 localhost kernel: Linux version 2.4.13-ac6 ([email protected]) (gcc version 3.0.2) #1 Fri Nov 2 20:42:36 CET 2001
Nov 4 13:53:39 localhost kernel: BIOS-provided physical RAM map:
Nov 4 13:53:39 localhost kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 4 13:53:39 localhost kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 4 13:53:39 localhost kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 4 13:53:39 localhost kernel: BIOS-e820: 0000000000100000 - 000000001fffd000 (usable)
Nov 4 13:53:39 localhost kernel: BIOS-e820: 000000001fffd000 - 000000001ffff000 (ACPI data)
Nov 4 13:53:39 localhost kernel: BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
Nov 4 13:53:39 localhost kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 4 13:53:39 localhost kernel: On node 0 totalpages: 131069
Nov 4 13:53:39 localhost kernel: zone(0): 4096 pages.
Nov 4 13:53:39 localhost kernel: zone(1): 126973 pages.
Nov 4 13:53:39 localhost kernel: zone(2): 0 pages.
Nov 4 13:53:39 localhost kernel: Local APIC disabled by BIOS -- reenabling.
Nov 4 13:53:39 localhost kernel: Found and enabled local APIC!
Nov 4 13:53:39 localhost kernel: Kernel command line: BOOT_IMAGE=2.4.13-ac6 root=306 video=matrox:1280x1024-16@85
Nov 4 13:53:39 localhost kernel: Initializing CPU#0
Nov 4 13:53:39 localhost kernel: Detected 451.031 MHz processor.
Nov 4 13:53:39 localhost kernel: Console: colour VGA+ 80x25
Nov 4 13:53:39 localhost kernel: Calibrating delay loop... 897.84 BogoMIPS
Nov 4 13:53:39 localhost kernel: Memory: 513312k/524276k available (1481k kernel code, 10576k reserved, 374k data, 232k init, 0k highmem)
Nov 4 13:53:39 localhost kernel: Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Nov 4 13:53:39 localhost kernel: Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Nov 4 13:53:39 localhost kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Nov 4 13:53:39 localhost kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 4 13:53:39 localhost kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 4 13:53:39 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Nov 4 13:53:39 localhost kernel: CPU: L2 cache: 512K
Nov 4 13:53:39 localhost kernel: Intel machine check architecture supported.
Nov 4 13:53:39 localhost kernel: Intel machine check reporting enabled on CPU#0.
Nov 4 13:53:39 localhost kernel: CPU: Intel Pentium III (Katmai) stepping 02
Nov 4 13:53:39 localhost kernel: Enabling fast FPU save and restore... done.
Nov 4 13:53:39 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
Nov 4 13:53:39 localhost kernel: Checking 'hlt' instruction... OK.
Nov 4 13:53:39 localhost kernel: POSIX conformance testing by UNIFIX
Nov 4 13:53:39 localhost kernel: enabled ExtINT on CPU#0
Nov 4 13:53:39 localhost kernel: ESR value before enabling vector: 00000040
Nov 4 13:53:39 localhost kernel: ESR value after enabling vector: 00000000
Nov 4 13:53:39 localhost kernel: Using local APIC timer interrupts.
Nov 4 13:53:39 localhost kernel: calibrating APIC timer ...
Nov 4 13:53:39 localhost kernel: ..... CPU clock speed is 451.0216 MHz.
Nov 4 13:53:39 localhost kernel: ..... host bus clock speed is 100.2268 MHz.
Nov 4 13:53:39 localhost kernel: cpu: 0, clocks: 1002268, slice: 501134
Nov 4 13:53:39 localhost kernel: CPU0<T0:1002256,T1:501120,D:2,S:501134,C:1002268>
Nov 4 13:53:39 localhost kernel: mtrr: v1.40 (20010327) Richard Gooch ([email protected])
Nov 4 13:53:39 localhost kernel: mtrr: detected mtrr type: Intel
Nov 4 13:53:39 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0720, last bus=1
Nov 4 13:53:39 localhost kernel: PCI: Using configuration type 1
Nov 4 13:53:39 localhost kernel: PCI: Probing PCI hardware
Nov 4 13:53:39 localhost kernel: Unknown bridge resource 0: assuming transparent
Nov 4 13:53:39 localhost kernel: PCI: Using IRQ router PIIX [8086/7110] at 00:04.0
Nov 4 13:53:39 localhost kernel: Limiting direct PCI/PCI transfers.
Nov 4 13:53:39 localhost kernel: Linux NET4.0 for Linux 2.4
Nov 4 13:53:39 localhost kernel: Based upon Swansea University Computer Society NET3.039
Nov 4 13:53:39 localhost kernel: Initializing RT netlink socket
Nov 4 13:53:39 localhost kernel: SBF: Simple Boot Flag extension found and enabled.
Nov 4 13:53:39 localhost kernel: SBF: Setting boot flags 0x1
Nov 4 13:53:39 localhost kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
Nov 4 13:53:39 localhost kernel: Starting kswapd v1.8
Nov 4 13:53:39 localhost kernel: Journalled Block Device driver loaded
Nov 4 13:53:39 localhost kernel: NTFS driver v1.1.20 [Flags: R/O]
Nov 4 13:53:39 localhost kernel: udf: registering filesystem
Nov 4 13:53:39 localhost kernel: i2c-core.o: i2c core module
Nov 4 13:53:39 localhost kernel: i2c-algo-bit.o: i2c bit algorithm module
Nov 4 13:53:39 localhost kernel: matroxfb: Matrox Millennium G400 MAX (AGP) detected
Nov 4 13:53:39 localhost kernel: matroxfb: MTRR's turned on
Nov 4 13:53:39 localhost kernel: matroxfb: 1280x1024x16bpp (virtual: 1280x6552)
Nov 4 13:53:39 localhost kernel: matroxfb: framebuffer at 0xE4000000, mapped to 0xe0812000, size 33554432
Nov 4 13:53:39 localhost kernel: Console: switching to colour frame buffer device 160x64
Nov 4 13:53:39 localhost kernel: fb0: MATROX VGA frame buffer device
Nov 4 13:53:39 localhost kernel: pty: 256 Unix98 ptys configured
Nov 4 13:53:39 localhost kernel: Real Time Clock Driver v1.10e
Nov 4 13:53:39 localhost kernel: block: queued sectors max/low 341008kB/209936kB, 1024 slots per queue
Nov 4 13:53:39 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Nov 4 13:53:39 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 4 13:53:39 localhost kernel: PIIX4: IDE controller on PCI bus 00 dev 21
Nov 4 13:53:39 localhost kernel: PIIX4: chipset revision 1
Nov 4 13:53:39 localhost kernel: PIIX4: not 100%% native mode: will probe irqs later
Nov 4 13:53:39 localhost kernel: hda: IBM-DTTA-371440, ATA DISK drive
Nov 4 13:53:39 localhost kernel: hdc: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
Nov 4 13:53:39 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 4 13:53:39 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 4 13:53:39 localhost kernel: hda: 28229040 sectors (14453 MB) w/462KiB Cache, CHS=1757/255/63
Nov 4 13:53:39 localhost kernel: ide-floppy driver 0.97.sv
Nov 4 13:53:39 localhost kernel: hdc: 244766kB, 489532 blocks, 512 sector size
Nov 4 13:53:39 localhost kernel: hdc: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
Nov 4 13:53:39 localhost kernel: hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
Nov 4 13:53:39 localhost kernel: Partition check:
Nov 4 13:53:39 localhost kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
Nov 4 13:53:39 localhost kernel: hdc: unknown partition table
Nov 4 13:53:39 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Nov 4 13:53:39 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 10 for device 00:07.0
Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 10 with 00:0a.0
Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 10 with 00:0a.1
Nov 4 13:53:39 localhost kernel: eth0: Intel Corporation 82557 [Ethernet Pro 100], 00:E0:18:90:14:C5, IRQ 10.
Nov 4 13:53:39 localhost kernel: Receiver lock-up bug exists -- enabling work-around.
Nov 4 13:53:39 localhost kernel: Board assembly 668081-002, Physical connectors present: RJ45
Nov 4 13:53:39 localhost kernel: Primary interface chip i82555 PHY #1.
Nov 4 13:53:39 localhost kernel: General self-test: passed.
Nov 4 13:53:39 localhost kernel: Serial sub-system self-test: passed.
Nov 4 13:53:39 localhost kernel: Internal registers self-test: passed.
Nov 4 13:53:39 localhost kernel: ROM checksum self-test: passed (0x24c9f043).
Nov 4 13:53:39 localhost kernel: Receiver lock-up workaround activated.
Nov 4 13:53:39 localhost kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Nov 4 13:53:39 localhost kernel: agpgart: Maximum main memory to use for agp memory: 439M
Nov 4 13:53:39 localhost kernel: agpgart: Detected Intel 440BX chipset
Nov 4 13:53:39 localhost kernel: agpgart: AGP aperture is 32M @ 0xe6000000
Nov 4 13:53:39 localhost kernel: [drm] AGP 0.99 on Intel 440BX @ 0xe6000000 32MB
Nov 4 13:53:39 localhost kernel: [drm] Initialized mga 3.0.2 20010321 on minor 0
Nov 4 13:53:39 localhost kernel: ide-floppy driver 0.97.sv
Nov 4 13:53:39 localhost kernel: SCSI subsystem driver Revision: 1.00
Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 5 for device 00:06.0
Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:04.2
Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:09.0
Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 11 for device 00:0b.0
Nov 4 13:53:39 localhost kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
Nov 4 13:53:39 localhost kernel: <Adaptec aic7890/91 Ultra2 SCSI adapter>
Nov 4 13:53:39 localhost kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
Nov 4 13:53:39 localhost kernel:
Nov 4 13:53:39 localhost kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
Nov 4 13:53:39 localhost kernel: <Adaptec 2940 SCSI adapter>
Nov 4 13:53:39 localhost kernel: aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
Nov 4 13:53:39 localhost kernel:
Nov 4 13:53:39 localhost kernel: Vendor: IBM Model: DDRS-39130D Rev: DC1B
Nov 4 13:53:39 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
Nov 4 13:53:39 localhost kernel: Vendor: TOSHIBA Model: DVD-ROM SD-M1201 Rev: 1R04
Nov 4 13:53:39 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 4 13:53:39 localhost kernel: Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.07
Nov 4 13:53:39 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 4 13:53:39 localhost kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 64
Nov 4 13:53:39 localhost kernel: (scsi1:A:2): 10.000MB/s transfers (10.000MHz, offset 15)
Nov 4 13:53:39 localhost kernel: Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.05
Nov 4 13:53:39 localhost kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 4 13:53:39 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Nov 4 13:53:39 localhost kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
Nov 4 13:53:39 localhost kernel: SCSI device sda: 17850000 512-byte hdwr sectors (9139 MB)
Nov 4 13:53:39 localhost kernel: sda: sda1 sda2
Nov 4 13:53:39 localhost kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0
Nov 4 13:53:39 localhost kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0, id 3, lun 0
Nov 4 13:53:39 localhost kernel: Attached scsi CD-ROM sr2 at scsi1, channel 0, id 2, lun 0
Nov 4 13:53:39 localhost kernel: (scsi0:A:1): 20.000MB/s transfers (20.000MHz, offset 16)
Nov 4 13:53:39 localhost kernel: sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Nov 4 13:53:39 localhost kernel: Uniform CD-ROM driver Revision: 3.12
Nov 4 13:53:39 localhost kernel: (scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 8)
Nov 4 13:53:39 localhost kernel: sr1: scsi3-mmc drive: 20x/20x writer cd/rw xa/form2 cdda tray
Nov 4 13:53:39 localhost kernel: sr2: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
Nov 4 13:53:39 localhost kernel: usb.c: registered new driver usbdevfs
Nov 4 13:53:39 localhost kernel: usb.c: registered new driver hub
Nov 4 13:53:39 localhost kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 4 13:53:39 localhost kernel: IP Protocols: ICMP, UDP, TCP
Nov 4 13:53:39 localhost kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Nov 4 13:53:39 localhost kernel: TCP: Hash tables configured (established 32768 bind 65536)
Nov 4 13:53:39 localhost kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Nov 4 13:53:39 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 4 13:53:39 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 4 13:53:39 localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
Nov 4 13:53:39 localhost kernel: Freeing unused kernel memory: 232k freed
Nov 4 13:53:39 localhost kernel: Adding Swap: 136512k swap-space (priority -1)
Nov 4 13:53:39 localhost kernel: Adding Swap: 130748k swap-space (priority -2)
Nov 4 13:53:39 localhost kernel: EXT3 FS 2.4-0.9.13, 21 Oct 2001 on ide0(3,6), internal journal
Nov 4 13:53:39 localhost kernel: hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
Nov 4 13:53:39 localhost kernel: hdc: unknown partition table
Nov 4 13:53:39 localhost kernel: reiserfs: checking transaction log (device 08:02) ...
Nov 4 13:53:39 localhost kernel: Using r5 hash to sort names
Nov 4 13:53:39 localhost kernel: ReiserFS version 3.6.25
Nov 4 13:53:39 localhost kernel: kjournald starting. Commit interval 5 seconds
Nov 4 13:53:39 localhost kernel: EXT3 FS 2.4-0.9.13, 21 Oct 2001 on ide0(3,3), internal journal
Nov 4 13:53:39 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
Nov 4 13:53:39 localhost kernel: hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664
Nov 4 13:53:39 localhost kernel: hdc: unknown partition table
Nov 4 13:53:39 localhost kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Nov 4 13:53:39 localhost kernel: PCI: Found IRQ 5 for device 00:04.2
Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:06.0
Nov 4 13:53:39 localhost kernel: PCI: Sharing IRQ 5 with 00:09.0
Nov 4 13:53:39 localhost kernel: uhci.c: USB UHCI at I/O 0xd400, IRQ 5
Nov 4 13:53:39 localhost kernel: usb.c: new USB bus registered, assigned bus number 1
Nov 4 13:53:39 localhost kernel: hub.c: USB hub found
Nov 4 13:53:39 localhost kernel: hub.c: 2 ports detected
...
lspci -v gives:
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 02)
Flags: bus master, medium devsel, latency 64
Memory at e6000000 (32-bit, prefetchable) [size=32M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: e0000000-e16fffff
Prefetchable memory behind bridge: e3f00000-e5ffffff
00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 32
I/O ports at d800 [size=16]
00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at d400 [size=32]
00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
00:06.0 SCSI storage controller: Adaptec AHA-2940U2/W / 7890
Subsystem: Adaptec 2940U2W SCSI Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
BIST result: 00
I/O ports at d000 [disabled] [size=256]
Memory at df800000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
00:07.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 05)
Subsystem: Intel Corporation 82558 10/100 with Wake on LAN
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e3000000 (32-bit, prefetchable) [size=4K]
I/O ports at b800 [size=32]
Memory at df000000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 1
00:09.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH: Unknown device 0000
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at de800000 (32-bit, non-prefetchable) [size=512]
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Hauppauge computer works Inc.: Unknown device 13eb
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e2000000 (32-bit, prefetchable) [size=4K]
00:0a.1 Multimedia controller: Brooktree Corporation Bt878 (rev 02)
Subsystem: Hauppauge computer works Inc.: Unknown device 13eb
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at e1800000 (32-bit, prefetchable) [size=4K]
00:0b.0 SCSI storage controller: Adaptec AHA-294x / AIC-7871
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at b400 [disabled] [size=256]
Memory at de000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=32K]
00:0c.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 06)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 32, IRQ 9
I/O ports at b000 [size=32]
Capabilities: [dc] Power Management version 1
00:0c.1 Input device controller: Creative Labs SB Live! (rev 06)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at a800 [size=8]
Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at e4000000 (32-bit, prefetchable) [size=32M]
Memory at e0800000 (32-bit, non-prefetchable) [size=16K]
Memory at e0000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at e3ff0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0
I don't know if I should say anything more?
Please CC to me as I am not on the mailing list, thanks you very much,
Gr?goire
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[email protected]
>Hello,
>
>With 2.4.10-ac7 no problems at all, but with 2.4.13-ac[246] (not tested the ot
>her
>ones), compiled either with gcc-2.96 from Mandrake or gcc-3.02 also from Mandr
>ake,
>on the first power on of my computer, ends so:
>
>scsi0:A:0:0: Tagged Queuing enabled. Depth 64
>scsi1: brkadrint, Scratch or SCB Memory Parity Error at seqaddr = 0x1
I have seen this reported before, but have yet to track it down.
The problem is an access to an uninitialized location in scratch
or SCB ram. Unfortunately, none of my aic7870 based cards seem
to show the error. Hopefully my next code review will unveil the
problem.
--
Justin