Manish Lachwani wrote:
> 0xd0 indicates that the driver aborted the command.
> Can you try to get the SMART data from the drive using
> smartctl?
>
> use "smartctl -e /dev/hdX" to enable SMART collection
>
> use "smartctl -a /dev/hdX" to collect the SMART data
Ok, so where do I find information on how to decode this?
# smartctl -a /dev/hde
Device: Maxtor 4G160J8 Supports ATA Version 6
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.
General Smart Values:
Off-line data collection status: (0x00) Offline data collection activity was
never started
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run
Total time to complete off-line
data collection: ( 30) Seconds
Offline data collection
Capabilities: (0x1b)SMART EXECUTE OFF-LINE IMMEDIATE
Automatic timer ON/OFF support
Suspend Offline Collection upon new
command
Offline surface scan supported
Self-test supported
Smart Capablilities: (0x0003) Saves SMART data before entering
power-saving mode
Supports SMART auto save timer
Error logging capability: (0x01) Error logging supported
Short self-test routine
recommended polling time: ( 2) Minutes
Extended self-test routine
recommended polling time: ( 103) Minutes
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst Threshold Raw Value
( 3)Spin Up Time 0x0027 252 252 063 0
( 4)Start Stop Count 0x0032 253 253 000 0
( 5)Reallocated Sector Ct 0x0033 253 253 063 0
( 6)Read Channel Margin 0x0001 253 253 100 0
( 7)Seek Error Rate 0x000a 253 252 000 0
( 8)Seek Time Preformance 0x0027 244 244 187 36736
( 9)Power On Hours 0x0032 253 253 000 4341
( 10)Spin Retry Count 0x002b 252 252 223 0
( 11)Calibration Retry Count 0x002b 252 252 223 0
( 12)Power Cycle Count 0x0032 253 253 000 43
(192)Power-Off Retract Count 0x0032 253 253 000 0
(193)Load Cycle Count 0x0032 253 253 000 0
(194)Temperature 0x0032 253 253 000 0
(195)Hardware ECC Recovered 0x000a 253 252 000 221
(196)Reallocated Event Count 0x0008 253 253 000 0
(197)Current Pending Sector 0x0008 253 253 000 0
(198)Offline Uncorrectable 0x0008 253 253 000 0
(199)UDMA CRC Error Count 0x0008 199 199 000 0
(200)Unknown Attribute 0x000a 253 252 000 0
(201)Unknown Attribute 0x000a 253 252 000 0
(202)Unknown Attribute 0x000a 253 252 000 0
(203)Unknown Attribute 0x000b 253 252 180 0
(204)Unknown Attribute 0x000a 253 252 000 0
(205)Unknown Attribute 0x000a 253 252 000 0
(207)Unknown Attribute 0x002a 252 252 000 0
(208)Unknown Attribute 0x002a 252 252 000 0
(209)Unknown Attribute 0x0024 253 253 000 0
( 99)Unknown Attribute 0x0004 253 253 000 0
(100)Unknown Attribute 0x0004 253 253 000 0
(101)Unknown Attribute 0x0004 253 253 000 0
SMART Error Log:
SMART Error Logging Version: 1
Error Log Data Structure Pointer: 05
ATA Error Count: 8
Non-Fatal Count: 0
Error Log Structure 1:
DCR FR SC SN CL SH D/H CR Timestamp
00 db 00 00 4f c2 00 b0 201
00 d8 00 00 4f c2 00 b0 201
00 da 00 00 4f c2 00 b0 201
00 d9 00 00 4f c2 00 b0 201
00 fe 00 00 00 00 00 ef 201
00 04 50 42 97 23 00 51 5
Error Log Structure 2:
DCR FR SC SN CL SH D/H CR Timestamp
08 00 80 2a 4e 8a e0 25 458636
08 00 80 aa 4e 8a e0 25 458636
08 00 80 2a 4f 8a e0 25 458636
08 00 80 aa 4f 8a e0 25 458636
08 d0 01 00 4f c2 e0 b0 459147
00 04 01 0b 4f c2 e0 51 279972
Error Log Structure 3:
DCR FR SC SN CL SH D/H CR Timestamp
08 00 80 aa 4e 8a e0 25 458636
08 00 80 2a 4f 8a e0 25 458636
08 00 80 aa 4f 8a e0 25 458636
08 d0 01 00 4f c2 e0 b0 459147
08 d1 01 01 4f c2 e0 b0 459147
00 04 01 0b 4f c2 e0 51 279972
Error Log Structure 4:
DCR FR SC SN CL SH D/H CR Timestamp
08 00 80 2a 4f 8a e0 25 458636
08 00 80 aa 4f 8a e0 25 458636
08 d0 01 00 4f c2 e0 b0 459147
08 d1 01 01 4f c2 e0 b0 459147
08 d0 01 00 4f c2 e0 b0 459148
00 04 01 0b 4f c2 e0 51 279972
Error Log Structure 5:
DCR FR SC SN CL SH D/H CR Timestamp
08 00 80 aa 4f 8a e0 25 458636
08 d0 01 00 4f c2 e0 b0 459147
08 d1 01 01 4f c2 e0 b0 459147
08 d0 01 00 4f c2 e0 b0 459148
08 d1 01 01 4f c2 e0 b0 459148
00 04 01 0b 4f c2 e0 51 279972
- Bryan
The "Hardware ECC Recovered" indicates the number of
ECC errors corrected in the drive. Do one thing. Try
to swap the drive with the drive on another ATA cable.
So, swap /dev/hde with /dev/hda (or whatever)
physically and check if the error follows the drive or
the ATA cable.
If it follows the drive, you may have to replace the
drive. Additionally, from the SMART error log #5:
00 04 01 0b 4f c2 e0 51 279972
indicates an aborted command (0x04) at the sector
0x0c24f0b. Try to read from that sector doing a "dd"
and see if the dd aborts too.
If the problem follows the drive, you should then run
a DOS based diagnostic utility (from the Maxtor site)
to determine if there are physical defects on the
drive ...
Thanks
Manish
--- Bryan Andersen <[email protected]> wrote:
> Manish Lachwani wrote:
> > 0xd0 indicates that the driver aborted the
> command.
> > Can you try to get the SMART data from the drive
> using
> > smartctl?
> >
> > use "smartctl -e /dev/hdX" to enable SMART
> collection
> >
> > use "smartctl -a /dev/hdX" to collect the SMART
> data
>
> Ok, so where do I find information on how to decode
> this?
>
> # smartctl -a /dev/hde
> Device: Maxtor 4G160J8 Supports ATA Version 6
> Drive supports S.M.A.R.T. and is enabled
> Check S.M.A.R.T. Passed.
>
> General Smart Values:
> Off-line data collection status: (0x00) Offline data
> collection activity was
> never
> started
>
> Self-test execution status: ( 0) The previous
> self-test routine
> completed
> without
> error or no self-test
> has ever
> been run
>
> Total time to complete off-line
> data collection: ( 30) Seconds
>
> Offline data collection
> Capabilities: (0x1b)SMART EXECUTE
> OFF-LINE IMMEDIATE
> Automatic
> timer ON/OFF support
> Suspend
> Offline Collection upon new
> command
> Offline
> surface scan supported
> Self-test
> supported
>
> Smart Capablilities: (0x0003) Saves SMART
> data before entering
>
> power-saving mode
> Supports
> SMART auto save timer
>
> Error logging capability: (0x01) Error
> logging supported
>
> Short self-test routine
> recommended polling time: ( 2) Minutes
>
> Extended self-test routine
> recommended polling time: ( 103) Minutes
>
> Vendor Specific SMART Attributes with Thresholds:
> Revision Number: 16
> Attribute Flag Value Worst
> Threshold Raw Value
> ( 3)Spin Up Time 0x0027 252 252
> 063 0
> ( 4)Start Stop Count 0x0032 253 253
> 000 0
> ( 5)Reallocated Sector Ct 0x0033 253 253
> 063 0
> ( 6)Read Channel Margin 0x0001 253 253
> 100 0
> ( 7)Seek Error Rate 0x000a 253 252
> 000 0
> ( 8)Seek Time Preformance 0x0027 244 244
> 187 36736
> ( 9)Power On Hours 0x0032 253 253
> 000 4341
> ( 10)Spin Retry Count 0x002b 252 252
> 223 0
> ( 11)Calibration Retry Count 0x002b 252 252
> 223 0
> ( 12)Power Cycle Count 0x0032 253 253
> 000 43
> (192)Power-Off Retract Count 0x0032 253 253
> 000 0
> (193)Load Cycle Count 0x0032 253 253
> 000 0
> (194)Temperature 0x0032 253 253
> 000 0
> (195)Hardware ECC Recovered 0x000a 253 252
> 000 221
> (196)Reallocated Event Count 0x0008 253 253
> 000 0
> (197)Current Pending Sector 0x0008 253 253
> 000 0
> (198)Offline Uncorrectable 0x0008 253 253
> 000 0
> (199)UDMA CRC Error Count 0x0008 199 199
> 000 0
> (200)Unknown Attribute 0x000a 253 252
> 000 0
> (201)Unknown Attribute 0x000a 253 252
> 000 0
> (202)Unknown Attribute 0x000a 253 252
> 000 0
> (203)Unknown Attribute 0x000b 253 252
> 180 0
> (204)Unknown Attribute 0x000a 253 252
> 000 0
> (205)Unknown Attribute 0x000a 253 252
> 000 0
> (207)Unknown Attribute 0x002a 252 252
> 000 0
> (208)Unknown Attribute 0x002a 252 252
> 000 0
> (209)Unknown Attribute 0x0024 253 253
> 000 0
> ( 99)Unknown Attribute 0x0004 253 253
> 000 0
> (100)Unknown Attribute 0x0004 253 253
> 000 0
> (101)Unknown Attribute 0x0004 253 253
> 000 0
> SMART Error Log:
> SMART Error Logging Version: 1
> Error Log Data Structure Pointer: 05
> ATA Error Count: 8
> Non-Fatal Count: 0
>
> Error Log Structure 1:
> DCR FR SC SN CL SH D/H CR Timestamp
> 00 db 00 00 4f c2 00 b0 201
> 00 d8 00 00 4f c2 00 b0 201
> 00 da 00 00 4f c2 00 b0 201
> 00 d9 00 00 4f c2 00 b0 201
> 00 fe 00 00 00 00 00 ef 201
> 00 04 50 42 97 23 00 51 5
>
> Error Log Structure 2:
> DCR FR SC SN CL SH D/H CR Timestamp
> 08 00 80 2a 4e 8a e0 25 458636
> 08 00 80 aa 4e 8a e0 25 458636
> 08 00 80 2a 4f 8a e0 25 458636
> 08 00 80 aa 4f 8a e0 25 458636
> 08 d0 01 00 4f c2 e0 b0 459147
> 00 04 01 0b 4f c2 e0 51 279972
>
> Error Log Structure 3:
> DCR FR SC SN CL SH D/H CR Timestamp
> 08 00 80 aa 4e 8a e0 25 458636
> 08 00 80 2a 4f 8a e0 25 458636
> 08 00 80 aa 4f 8a e0 25 458636
> 08 d0 01 00 4f c2 e0 b0 459147
> 08 d1 01 01 4f c2 e0 b0 459147
> 00 04 01 0b 4f c2 e0 51 279972
>
> Error Log Structure 4:
> DCR FR SC SN CL SH D/H CR Timestamp
> 08 00 80 2a 4f 8a e0 25 458636
> 08 00 80 aa 4f 8a e0 25 458636
> 08 d0 01 00 4f c2 e0 b0 459147
> 08 d1 01 01 4f c2 e0 b0 459147
> 08 d0 01 00 4f c2 e0 b0 459148
> 00 04 01 0b 4f c2 e0 51 279972
>
> Error Log Structure 5:
> DCR FR SC SN CL SH D/H CR Timestamp
> 08 00 80 aa 4f 8a e0 25 458636
> 08 d0 01 00 4f c2 e0 b0 459147
> 08 d1 01 01 4f c2 e0 b0 459147
> 08 d0 01 00 4f c2 e0 b0 459148
> 08 d1 01 01 4f c2 e0 b0 459148
> 00 04 01 0b 4f c2 e0 51 279972
>
>
> - Bryan
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
On Sat, 25 Jan 2003, Manish Lachwani wrote:
> The "Hardware ECC Recovered" indicates the number of
> ECC errors corrected in the drive. Do one thing. Try
> to swap the drive with the drive on another ATA cable.
> So, swap /dev/hde with /dev/hda (or whatever)
> physically and check if the error follows the drive or
> the ATA cable.
>
> If it follows the drive, you may have to replace the
> drive. Additionally, from the SMART error log #5:
>
> 00 04 01 0b 4f c2 e0 51 279972
NO!
command aborted
amount to transfer == 1 sector
have to dig through notes to decode ...
lcyl smart passcode
hcyl smart passcode
primary device
ready_seek_error
It barfed the command ...
try -e first
Cheers,
Andre Hedrick
LAD Storage Consulting Group
I dont think so. Without SMART data collection being
enabled, it wont give out the any SMART data at all.
How, did the SMART data show:
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 16
Attribute Flag Value Worst
Threshold Raw Value
( 3)Spin Up Time 0x0027 252 252 063
0
( 4)Start Stop Count 0x0032 253 253 000
0
( 5)Reallocated Sector Ct 0x0033 253 253 063
0
( 6)Read Channel Margin 0x0001 253 253 100
0
( 7)Seek Error Rate 0x000a 253 252 000
0
( 8)Seek Time Preformance 0x0027 244 244 187
36736
( 9)Power On Hours 0x0032 253 253 000
4341
( 10)Spin Retry Count 0x002b 252 252 223
0
( 11)Calibration Retry Count 0x002b 252 252 223
0
( 12)Power Cycle Count 0x0032 253 253 000
43
(192)Power-Off Retract Count 0x0032 253 253 000
0
(193)Load Cycle Count 0x0032 253 253 000
0
(194)Temperature 0x0032 253 253 000
0
(195)Hardware ECC Recovered 0x000a 253 252 000
221
(196)Reallocated Event Count 0x0008 253 253 000
0
(197)Current Pending Sector 0x0008 253 253 000
0
(198)Offline Uncorrectable 0x0008 253 253 000
0
(199)UDMA CRC Error Count 0x0008 199 199 000
0
(200)Unknown Attribute 0x000a 253 252 000
0
(201)Unknown Attribute 0x000a 253 252 000
0
(202)Unknown Attribute 0x000a 253 252 000
0
(203)Unknown Attribute 0x000b 253 252 180
0
(204)Unknown Attribute 0x000a 253 252 000
0
(205)Unknown Attribute 0x000a 253 252 000
0
(207)Unknown Attribute 0x002a 252 252 000
0
(208)Unknown Attribute 0x002a 252 252 000
0
(209)Unknown Attribute 0x0024 253 253 000
0
( 99)Unknown Attribute 0x0004 253 253 000
0
(100)Unknown Attribute 0x0004 253 253 000
0
(101)Unknown Attribute 0x0004 253 253 000
0
SMART Error Log:
SMART Error Logging Version: 1
Error Log Data Structure Pointer: 05
ATA Error Count: 8
Non-Fatal Count: 0
Also, the SMART error log,
Error Log Structure 5:
DCR FR SC SN CL SH D/H CR Timestamp
08 00 80 aa 4f 8a e0 25 458636
08 d0 01 00 4f c2 e0 b0 459147
08 d1 01 01 4f c2 e0 b0 459147
08 d0 01 00 4f c2 e0 b0 459148
08 d1 01 01 4f c2 e0 b0 459148
00 04 01 0b 4f c2 e0 51 279972
You can retrieve the sector# ...
Thanks
Manish
--- Andre Hedrick <[email protected]> wrote:
> On Sat, 25 Jan 2003, Manish Lachwani wrote:
>
> > The "Hardware ECC Recovered" indicates the number
> of
> > ECC errors corrected in the drive. Do one thing.
> Try
> > to swap the drive with the drive on another ATA
> cable.
> > So, swap /dev/hde with /dev/hda (or whatever)
> > physically and check if the error follows the
> drive or
> > the ATA cable.
> >
> > If it follows the drive, you may have to replace
> the
> > drive. Additionally, from the SMART error log #5:
> >
> > 00 04 01 0b 4f c2 e0 51 279972
>
> NO!
> command aborted
> amount to transfer == 1 sector
> have to dig through notes to decode
> ...
> lcyl smart passcode
> hcyl smart passcode
> primary device
>
> ready_seek_error
>
>
> It barfed the command ...
>
> try -e first
>
> Cheers,
>
> Andre Hedrick
> LAD Storage Consulting Group
>
>
>
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Smart can be enabled by the BIOS, but the BIOS does not issue diagnostic
tests operations.
> General Smart Values:
> Off-line data collection status: (0x00) Offline data collection activity was
> never started
was never started --
> Self-test execution status: ( 0) The previous self-test routine completed
> without error or no self-test has ever
> been run
Was never executed, "after" the vendor cleared the state before shipping.
They can clear the RO log space that can not be gotten to w/o VUO and
passcodes.
So show me the sector form the logs.
You can't!
WIN_READDMA_EXT == 0x25
> 08 00 80 aa 4f 8a e0 25 458636
You only have the lower 24-bits
0x??????8a4faa
This requires another tool, as the original "smart from sff-8035" is
obsolete.
Cheers,
Andre Hedrick
LAD Storage Consulting Group
On Sun, 26 Jan 2003, Manish Lachwani wrote:
> I dont think so. Without SMART data collection being
> enabled, it wont give out the any SMART data at all.
> How, did the SMART data show:
>
> Vendor Specific SMART Attributes with Thresholds:
> Revision Number: 16
> Attribute Flag Value Worst
> Threshold Raw Value
> ( 3)Spin Up Time 0x0027 252 252 063
> 0
> ( 4)Start Stop Count 0x0032 253 253 000
> 0
> ( 5)Reallocated Sector Ct 0x0033 253 253 063
> 0
> ( 6)Read Channel Margin 0x0001 253 253 100
> 0
> ( 7)Seek Error Rate 0x000a 253 252 000
> 0
> ( 8)Seek Time Preformance 0x0027 244 244 187
> 36736
> ( 9)Power On Hours 0x0032 253 253 000
> 4341
> ( 10)Spin Retry Count 0x002b 252 252 223
> 0
> ( 11)Calibration Retry Count 0x002b 252 252 223
> 0
> ( 12)Power Cycle Count 0x0032 253 253 000
> 43
> (192)Power-Off Retract Count 0x0032 253 253 000
> 0
> (193)Load Cycle Count 0x0032 253 253 000
> 0
> (194)Temperature 0x0032 253 253 000
> 0
> (195)Hardware ECC Recovered 0x000a 253 252 000
> 221
> (196)Reallocated Event Count 0x0008 253 253 000
> 0
> (197)Current Pending Sector 0x0008 253 253 000
> 0
> (198)Offline Uncorrectable 0x0008 253 253 000
> 0
> (199)UDMA CRC Error Count 0x0008 199 199 000
> 0
> (200)Unknown Attribute 0x000a 253 252 000
> 0
> (201)Unknown Attribute 0x000a 253 252 000
> 0
> (202)Unknown Attribute 0x000a 253 252 000
> 0
> (203)Unknown Attribute 0x000b 253 252 180
> 0
> (204)Unknown Attribute 0x000a 253 252 000
> 0
> (205)Unknown Attribute 0x000a 253 252 000
> 0
> (207)Unknown Attribute 0x002a 252 252 000
> 0
> (208)Unknown Attribute 0x002a 252 252 000
> 0
> (209)Unknown Attribute 0x0024 253 253 000
> 0
> ( 99)Unknown Attribute 0x0004 253 253 000
> 0
> (100)Unknown Attribute 0x0004 253 253 000
> 0
> (101)Unknown Attribute 0x0004 253 253 000
> 0
> SMART Error Log:
> SMART Error Logging Version: 1
> Error Log Data Structure Pointer: 05
> ATA Error Count: 8
> Non-Fatal Count: 0
>
> Also, the SMART error log,
>
> Error Log Structure 5:
> DCR FR SC SN CL SH D/H CR Timestamp
> 08 00 80 aa 4f 8a e0 25 458636
> 08 d0 01 00 4f c2 e0 b0 459147
> 08 d1 01 01 4f c2 e0 b0 459147
> 08 d0 01 00 4f c2 e0 b0 459148
> 08 d1 01 01 4f c2 e0 b0 459148
> 00 04 01 0b 4f c2 e0 51 279972
>
> You can retrieve the sector# ...
>
> Thanks
> Manish
>
> --- Andre Hedrick <[email protected]> wrote:
> > On Sat, 25 Jan 2003, Manish Lachwani wrote:
> >
> > > The "Hardware ECC Recovered" indicates the number
> > of
> > > ECC errors corrected in the drive. Do one thing.
> > Try
> > > to swap the drive with the drive on another ATA
> > cable.
> > > So, swap /dev/hde with /dev/hda (or whatever)
> > > physically and check if the error follows the
> > drive or
> > > the ATA cable.
> > >
> > > If it follows the drive, you may have to replace
> > the
> > > drive. Additionally, from the SMART error log #5:
> > >
> > > 00 04 01 0b 4f c2 e0 51 279972
> >
> > NO!
> > command aborted
> > amount to transfer == 1 sector
> > have to dig through notes to decode
> > ...
> > lcyl smart passcode
> > hcyl smart passcode
> > primary device
> >
> > ready_seek_error
> >
> >
> > It barfed the command ...
> >
> > try -e first
> >
> > Cheers,
> >
> > Andre Hedrick
> > LAD Storage Consulting Group
> >
> >
> >
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
his is the help from smartctl:
smartctl version 2.1 - S.M.A.R.T. Control Program
useage: smartctl -[opts] [device]
Read Only Commands:
a Show All S.M.A.R.T.
Information (ATA and SCSI)
g Show General
S.M.A.R.T. Attributes (ATA Only)
v Show Vendor S.M.A.R.T.
Attributes (ATA Only)
l Show S.M.A.R.T. Drive
Error Log (ATA Only
L Show S.M.A.R.T. Drive
SelfTest Log (ATA Only)
i Show S.M.A.R.T. Drive
Info (ATA and SCSI)
c Check S.M.A.R.T.
Status (ATA and SCSI)
Enable / Disable Commands:
e Enable S.M.A.R.T. data
collection (ATA and SCSI)
d Disable S.M.A.R.T.data
collection (ATA and SCSI)
t Enable S.M.A.R.T.
Automatic Offline Test (ATA Only)
T Disable S.M.A.R.T.
Automatic Offline Test (ATA Only)
Test Commands:
O Execute Off-line data
collectioni(ATA Only)
S Execute Short Self
Test (ATA Only)
s Execute Short Self
Test (Captive Mode) (ATA Only)
X Execute Extended Self
Test (ATA Only)
x Execute Extended Self
Test (Captive Mode)(ATA Only)
A Execute Self Test
Abort (ATA Only)
Off-line data collection has nothing to do with the
SMART data collection. You enable the offline test,
then run the test and collect the offline data.
I agree with the fact that we have the lower 24 bits.
However, SMART attributes displayed is appropriately
collected from the drive. Look at the sequence below:
bash# ./smartctl -a /dev/hda
Device: ST380021A Supports ATA Version 5
Drive supports S.M.A.R.T. and is disabled
Use option -e to enable
bash# ./smartctl -e /dev/hda
bash# ./smartctl -a /dev/hda
Device: ST380021A Supports ATA Version 5
Drive supports S.M.A.R.T. and is enabled
Check S.M.A.R.T. Passed.
General Smart Values:
Off-line data collection status: (0x82) Offline data
collection activity
completed
without error
Self-test execution status: ( 0) The previous
self-test routine completed
without error
or no self-test has ever
been run
Total time to complete off-line
data collection: ( 422) Seconds
Offline data collection
Capabilities: (0x1b)SMART EXECUTE
OFF-LINE IMMEDIATE
Automatic
timer ON/OFF support
Suspend
Offline Collection upon new
command
Offline
surface scan supported
Self-test
supported
Smart Capablilities: (0x0003) Saves SMART
data before entering
power-saving
mode
Supports SMART
auto save timer
Error logging capability: (0x01) Error logging
supported
Short self-test routine
recommended polling time: ( 1) Minutes
Extended self-test routine
recommended polling time: ( 57) Minutes
Vendor Specific SMART Attributes with Thresholds:
Revision Number: 10
Attribute Flag Value Worst
Threshold Raw Value
( 1)Raw Read Error Rate 0x000f 075 070 034
92897937
( 3)Spin Up Time 0x0003 070 070 000
0
( 4)Start Stop Count 0x0032 100 100 020
3
( 5)Reallocated Sector Ct 0x0033 100 100 036
0
( 7)Seek Error Rate 0x000f 079 060 030
93809829
( 9)Power On Hours 0x0032 096 096 000
4158
( 10)Spin Retry Count 0x0013 100 100 097
0
( 12)Power Cycle Count 0x0032 100 100 020
261
(194)Temperature 0x0022 028 043 000
28
(195)Hardware ECC Recovered 0x001a 075 070 000
92897937
(197)Current Pending Sector 0x0012 100 100 000
0
(198)Offline Uncorrectable 0x0010 100 100 000
0
(199)UDMA CRC Error Count 0x003e 200 200 000
0
(200)Unknown Attribute 0x0000 100 253 000
0
(202)Unknown Attribute 0x0032 100 253 000
0
SMART Error Log:
SMART Error Logging Version: 1
No Errors Logged
--- Andre Hedrick <[email protected]> wrote:
>
> Smart can be enabled by the BIOS, but the BIOS does
> not issue diagnostic
> tests operations.
>
> > General Smart Values:
> > Off-line data collection status: (0x00) Offline
> data collection activity was
> > never
> started
>
> was never started --
>
> > Self-test execution status: ( 0) The
> previous self-test routine completed
> > without
> error or no self-test has ever
> > been run
>
> Was never executed, "after" the vendor cleared the
> state before shipping.
>
> They can clear the RO log space that can not be
> gotten to w/o VUO and
> passcodes.
>
> So show me the sector form the logs.
> You can't!
>
> WIN_READDMA_EXT == 0x25
>
> > 08 00 80 aa 4f 8a e0 25
> 458636
>
> You only have the lower 24-bits
>
> 0x??????8a4faa
>
> This requires another tool, as the original "smart
> from sff-8035" is
> obsolete.
>
>
> Cheers,
>
> Andre Hedrick
> LAD Storage Consulting Group
>
> On Sun, 26 Jan 2003, Manish Lachwani wrote:
>
> > I dont think so. Without SMART data collection
> being
> > enabled, it wont give out the any SMART data at
> all.
> > How, did the SMART data show:
> >
> > Vendor Specific SMART Attributes with Thresholds:
> > Revision Number: 16
> > Attribute Flag Value Worst
> > Threshold Raw Value
> > ( 3)Spin Up Time 0x0027 252 252
> 063
> > 0
> > ( 4)Start Stop Count 0x0032 253 253
> 000
> > 0
> > ( 5)Reallocated Sector Ct 0x0033 253 253
> 063
> > 0
> > ( 6)Read Channel Margin 0x0001 253 253
> 100
> > 0
> > ( 7)Seek Error Rate 0x000a 253 252
> 000
> > 0
> > ( 8)Seek Time Preformance 0x0027 244 244
> 187
> > 36736
> > ( 9)Power On Hours 0x0032 253 253
> 000
> > 4341
> > ( 10)Spin Retry Count 0x002b 252 252
> 223
> > 0
> > ( 11)Calibration Retry Count 0x002b 252 252
> 223
> > 0
> > ( 12)Power Cycle Count 0x0032 253 253
> 000
> > 43
> > (192)Power-Off Retract Count 0x0032 253 253
> 000
> > 0
> > (193)Load Cycle Count 0x0032 253 253
> 000
> > 0
> > (194)Temperature 0x0032 253 253
> 000
> > 0
> > (195)Hardware ECC Recovered 0x000a 253 252
> 000
> > 221
> > (196)Reallocated Event Count 0x0008 253 253
> 000
> > 0
> > (197)Current Pending Sector 0x0008 253 253
> 000
> > 0
> > (198)Offline Uncorrectable 0x0008 253 253
> 000
> > 0
> > (199)UDMA CRC Error Count 0x0008 199 199
> 000
> > 0
> > (200)Unknown Attribute 0x000a 253 252
> 000
> > 0
> > (201)Unknown Attribute 0x000a 253 252
> 000
> > 0
> > (202)Unknown Attribute 0x000a 253 252
> 000
> > 0
> > (203)Unknown Attribute 0x000b 253 252
> 180
> > 0
> > (204)Unknown Attribute 0x000a 253 252
> 000
> > 0
> > (205)Unknown Attribute 0x000a 253 252
> 000
> > 0
> > (207)Unknown Attribute 0x002a 252 252
> 000
> > 0
> > (208)Unknown Attribute 0x002a 252 252
> 000
> > 0
> > (209)Unknown Attribute 0x0024 253 253
> 000
> > 0
> > ( 99)Unknown Attribute 0x0004 253 253
> 000
> > 0
> > (100)Unknown Attribute 0x0004 253 253
> 000
> > 0
> > (101)Unknown Attribute 0x0004 253 253
> 000
> > 0
> > SMART Error Log:
> > SMART Error Logging Version: 1
> > Error Log Data Structure Pointer: 05
> > ATA Error Count: 8
> > Non-Fatal Count: 0
> >
> > Also, the SMART error log,
> >
> > Error Log Structure 5:
> > DCR FR SC SN CL SH D/H CR
> Timestamp
> > 08 00 80 aa 4f 8a e0 25
> 458636
> > 08 d0 01 00 4f c2 e0 b0
> 459147
> > 08 d1 01 01 4f c2 e0 b0
> 459147
> > 08 d0 01 00 4f c2 e0 b0
> 459148
> > 08 d1 01 01 4f c2 e0 b0
> 459148
> > 00 04 01 0b 4f c2 e0 51
> 279972
> >
> > You can retrieve the sector# ...
> >
> > Thanks
> > Manish
> >
> > --- Andre Hedrick <[email protected]> wrote:
> > > On Sat, 25 Jan 2003, Manish Lachwani wrote:
> > >
> > > > The "Hardware ECC Recovered" indicates the
> number
> > > of
> > > > ECC errors corrected in the drive. Do one
> thing.
> > > Try
> > > > to swap the drive with the drive on another
> ATA
> > > cable.
> > > > So, swap /dev/hde with /dev/hda (or whatever)
> > > > physically and check if the error follows the
> > > drive or
> > > > the ATA cable.
> > > >
> > > > If it follows the drive, you may have to
> replace
> > > the
> > > > drive. Additionally, from the SMART error log
> #5:
>
=== message truncated ===
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
Yeah, I know a good friend of my is the author.
Since he is not available to comment, you can believe as you wish.
Read the code and read the ioctl transport, you can not get there from
here, period.
So the 28-bit Smart was never executed, however the 48-bit was.
You can't get the meaning full data.
I am out of this arguement, go read the spec.
Cheers,
On Sun, 26 Jan 2003, Manish Lachwani wrote:
> his is the help from smartctl:
>
> smartctl version 2.1 - S.M.A.R.T. Control Program
> useage: smartctl -[opts] [device]
> Read Only Commands:
> a Show All S.M.A.R.T.
> Information (ATA and SCSI)
> g Show General
> S.M.A.R.T. Attributes (ATA Only)
> v Show Vendor S.M.A.R.T.
> Attributes (ATA Only)
> l Show S.M.A.R.T. Drive
> Error Log (ATA Only
> L Show S.M.A.R.T. Drive
> SelfTest Log (ATA Only)
> i Show S.M.A.R.T. Drive
> Info (ATA and SCSI)
> c Check S.M.A.R.T.
> Status (ATA and SCSI)
>
> Enable / Disable Commands:
> e Enable S.M.A.R.T. data
> collection (ATA and SCSI)
> d Disable S.M.A.R.T.data
> collection (ATA and SCSI)
> t Enable S.M.A.R.T.
> Automatic Offline Test (ATA Only)
> T Disable S.M.A.R.T.
> Automatic Offline Test (ATA Only)
>
> Test Commands:
> O Execute Off-line data
> collectioni(ATA Only)
> S Execute Short Self
> Test (ATA Only)
> s Execute Short Self
> Test (Captive Mode) (ATA Only)
> X Execute Extended Self
> Test (ATA Only)
> x Execute Extended Self
> Test (Captive Mode)(ATA Only)
> A Execute Self Test
> Abort (ATA Only)
>
> Off-line data collection has nothing to do with the
> SMART data collection. You enable the offline test,
> then run the test and collect the offline data.
>
> I agree with the fact that we have the lower 24 bits.
> However, SMART attributes displayed is appropriately
> collected from the drive. Look at the sequence below:
>
> bash# ./smartctl -a /dev/hda
> Device: ST380021A Supports ATA Version 5
> Drive supports S.M.A.R.T. and is disabled
> Use option -e to enable
> bash# ./smartctl -e /dev/hda
> bash# ./smartctl -a /dev/hda
> Device: ST380021A Supports ATA Version 5
> Drive supports S.M.A.R.T. and is enabled
> Check S.M.A.R.T. Passed.
>
> General Smart Values:
> Off-line data collection status: (0x82) Offline data
> collection activity
> completed
> without error
>
> Self-test execution status: ( 0) The previous
> self-test routine completed
> without error
> or no self-test has ever
> been run
>
> Total time to complete off-line
> data collection: ( 422) Seconds
>
> Offline data collection
> Capabilities: (0x1b)SMART EXECUTE
> OFF-LINE IMMEDIATE
> Automatic
> timer ON/OFF support
> Suspend
> Offline Collection upon new
> command
> Offline
> surface scan supported
> Self-test
> supported
>
> Smart Capablilities: (0x0003) Saves SMART
> data before entering
> power-saving
> mode
> Supports SMART
> auto save timer
>
> Error logging capability: (0x01) Error logging
> supported
>
> Short self-test routine
> recommended polling time: ( 1) Minutes
>
> Extended self-test routine
> recommended polling time: ( 57) Minutes
>
> Vendor Specific SMART Attributes with Thresholds:
> Revision Number: 10
> Attribute Flag Value Worst
> Threshold Raw Value
> ( 1)Raw Read Error Rate 0x000f 075 070 034
> 92897937
> ( 3)Spin Up Time 0x0003 070 070 000
> 0
> ( 4)Start Stop Count 0x0032 100 100 020
> 3
> ( 5)Reallocated Sector Ct 0x0033 100 100 036
> 0
> ( 7)Seek Error Rate 0x000f 079 060 030
> 93809829
> ( 9)Power On Hours 0x0032 096 096 000
> 4158
> ( 10)Spin Retry Count 0x0013 100 100 097
> 0
> ( 12)Power Cycle Count 0x0032 100 100 020
> 261
> (194)Temperature 0x0022 028 043 000
> 28
> (195)Hardware ECC Recovered 0x001a 075 070 000
> 92897937
> (197)Current Pending Sector 0x0012 100 100 000
> 0
> (198)Offline Uncorrectable 0x0010 100 100 000
> 0
> (199)UDMA CRC Error Count 0x003e 200 200 000
> 0
> (200)Unknown Attribute 0x0000 100 253 000
> 0
> (202)Unknown Attribute 0x0032 100 253 000
> 0
> SMART Error Log:
> SMART Error Logging Version: 1
> No Errors Logged
>
>
>
> --- Andre Hedrick <[email protected]> wrote:
> >
> > Smart can be enabled by the BIOS, but the BIOS does
> > not issue diagnostic
> > tests operations.
> >
> > > General Smart Values:
> > > Off-line data collection status: (0x00) Offline
> > data collection activity was
> > > never
> > started
> >
> > was never started --
> >
> > > Self-test execution status: ( 0) The
> > previous self-test routine completed
> > > without
> > error or no self-test has ever
> > > been run
> >
> > Was never executed, "after" the vendor cleared the
> > state before shipping.
> >
> > They can clear the RO log space that can not be
> > gotten to w/o VUO and
> > passcodes.
> >
> > So show me the sector form the logs.
> > You can't!
> >
> > WIN_READDMA_EXT == 0x25
> >
> > > 08 00 80 aa 4f 8a e0 25
> > 458636
> >
> > You only have the lower 24-bits
> >
> > 0x??????8a4faa
> >
> > This requires another tool, as the original "smart
> > from sff-8035" is
> > obsolete.
> >
> >
> > Cheers,
> >
> > Andre Hedrick
> > LAD Storage Consulting Group
> >
> > On Sun, 26 Jan 2003, Manish Lachwani wrote:
> >
> > > I dont think so. Without SMART data collection
> > being
> > > enabled, it wont give out the any SMART data at
> > all.
> > > How, did the SMART data show:
> > >
> > > Vendor Specific SMART Attributes with Thresholds:
> > > Revision Number: 16
> > > Attribute Flag Value Worst
> > > Threshold Raw Value
> > > ( 3)Spin Up Time 0x0027 252 252
> > 063
> > > 0
> > > ( 4)Start Stop Count 0x0032 253 253
> > 000
> > > 0
> > > ( 5)Reallocated Sector Ct 0x0033 253 253
> > 063
> > > 0
> > > ( 6)Read Channel Margin 0x0001 253 253
> > 100
> > > 0
> > > ( 7)Seek Error Rate 0x000a 253 252
> > 000
> > > 0
> > > ( 8)Seek Time Preformance 0x0027 244 244
> > 187
> > > 36736
> > > ( 9)Power On Hours 0x0032 253 253
> > 000
> > > 4341
> > > ( 10)Spin Retry Count 0x002b 252 252
> > 223
> > > 0
> > > ( 11)Calibration Retry Count 0x002b 252 252
> > 223
> > > 0
> > > ( 12)Power Cycle Count 0x0032 253 253
> > 000
> > > 43
> > > (192)Power-Off Retract Count 0x0032 253 253
> > 000
> > > 0
> > > (193)Load Cycle Count 0x0032 253 253
> > 000
> > > 0
> > > (194)Temperature 0x0032 253 253
> > 000
> > > 0
> > > (195)Hardware ECC Recovered 0x000a 253 252
> > 000
> > > 221
> > > (196)Reallocated Event Count 0x0008 253 253
> > 000
> > > 0
> > > (197)Current Pending Sector 0x0008 253 253
> > 000
> > > 0
> > > (198)Offline Uncorrectable 0x0008 253 253
> > 000
> > > 0
> > > (199)UDMA CRC Error Count 0x0008 199 199
> > 000
> > > 0
> > > (200)Unknown Attribute 0x000a 253 252
> > 000
> > > 0
> > > (201)Unknown Attribute 0x000a 253 252
> > 000
> > > 0
> > > (202)Unknown Attribute 0x000a 253 252
> > 000
> > > 0
> > > (203)Unknown Attribute 0x000b 253 252
> > 180
> > > 0
> > > (204)Unknown Attribute 0x000a 253 252
> > 000
> > > 0
> > > (205)Unknown Attribute 0x000a 253 252
> > 000
> > > 0
> > > (207)Unknown Attribute 0x002a 252 252
> > 000
> > > 0
> > > (208)Unknown Attribute 0x002a 252 252
> > 000
> > > 0
> > > (209)Unknown Attribute 0x0024 253 253
> > 000
> > > 0
> > > ( 99)Unknown Attribute 0x0004 253 253
> > 000
> > > 0
> > > (100)Unknown Attribute 0x0004 253 253
> > 000
> > > 0
> > > (101)Unknown Attribute 0x0004 253 253
> > 000
> > > 0
> > > SMART Error Log:
> > > SMART Error Logging Version: 1
> > > Error Log Data Structure Pointer: 05
> > > ATA Error Count: 8
> > > Non-Fatal Count: 0
> > >
> > > Also, the SMART error log,
> > >
> > > Error Log Structure 5:
> > > DCR FR SC SN CL SH D/H CR
> > Timestamp
> > > 08 00 80 aa 4f 8a e0 25
> > 458636
> > > 08 d0 01 00 4f c2 e0 b0
> > 459147
> > > 08 d1 01 01 4f c2 e0 b0
> > 459147
> > > 08 d0 01 00 4f c2 e0 b0
> > 459148
> > > 08 d1 01 01 4f c2 e0 b0
> > 459148
> > > 00 04 01 0b 4f c2 e0 51
> > 279972
> > >
> > > You can retrieve the sector# ...
> > >
> > > Thanks
> > > Manish
> > >
> > > --- Andre Hedrick <[email protected]> wrote:
> > > > On Sat, 25 Jan 2003, Manish Lachwani wrote:
> > > >
> > > > > The "Hardware ECC Recovered" indicates the
> > number
> > > > of
> > > > > ECC errors corrected in the drive. Do one
> > thing.
> > > > Try
> > > > > to swap the drive with the drive on another
> > ATA
> > > > cable.
> > > > > So, swap /dev/hde with /dev/hda (or whatever)
> > > > > physically and check if the error follows the
> > > > drive or
> > > > > the ATA cable.
> > > > >
> > > > > If it follows the drive, you may have to
> > replace
> > > > the
> > > > > drive. Additionally, from the SMART error log
> > #5:
> >
> === message truncated ===
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
>
Andre Hedrick
LAD Storage Consulting Group