Please excuse me if this is not the correct forum.
I have a question about the 2.4.18 kernel.
I am currently trying to use drives larger than 134G on my target system.
I would expect that the CMD680 and CSB6 drivers have been updated since
the 2.4.18 kernel. Can someone let me know where I can find the most
recent drivers. I have checked the sources I know for the latest driver and
not had any luck. I was hoping someone may have a better set of sources.
Thanks in advance for the help.
Larry
On Thu, 2003-02-13 at 23:27, Larry Hileman wrote:
> I would expect that the CMD680 and CSB6 drivers have been updated since
> the 2.4.18 kernel. Can someone let me know where I can find the most
> recent drivers. I have checked the sources I know for the latest driver and
> not had any luck. I was hoping someone may have a better set of sources.
The 2.4.20/21predrivers support LBA48
Do the 2.4.20/21 predrivers work on a 2.4.18 kernel?
Or have they been back ported?
-----Original Message-----
From: Alan Cox [mailto:[email protected]]
Sent: Thursday, February 13, 2003 4:47 PM
To: Larry Hileman
Cc: Linux Kernel "Maillist (E-mail)
Subject: Re: Question about 48 bit IDE on 2.4.18 kernel
On Thu, 2003-02-13 at 23:27, Larry Hileman wrote:
> I would expect that the CMD680 and CSB6 drivers have been updated since
> the 2.4.18 kernel. Can someone let me know where I can find the most
> recent drivers. I have checked the sources I know for the latest driver
and
> not had any luck. I was hoping someone may have a better set of sources.
The 2.4.20/21predrivers support LBA48
On Thu, 2003-02-13 at 23:51, Larry Hileman wrote:
> Do the 2.4.20/21 predrivers work on a 2.4.18 kernel?
> Or have they been back ported?
No and no. The newer IDE code has dependancies on the block layer
improvements.
If you want them back ported, you should do it your self of offer to pay
someone.
On Thu, 13 Feb 2003, Larry Hileman wrote:
> Do the 2.4.20/21 predrivers work on a 2.4.18 kernel?
> Or have they been back ported?
>
> -----Original Message-----
> From: Alan Cox [mailto:[email protected]]
> Sent: Thursday, February 13, 2003 4:47 PM
> To: Larry Hileman
> Cc: Linux Kernel "Maillist (E-mail)
> Subject: Re: Question about 48 bit IDE on 2.4.18 kernel
>
>
> On Thu, 2003-02-13 at 23:27, Larry Hileman wrote:
> > I would expect that the CMD680 and CSB6 drivers have been updated since
> > the 2.4.18 kernel. Can someone let me know where I can find the most
> > recent drivers. I have checked the sources I know for the latest driver
> and
> > not had any luck. I was hoping someone may have a better set of sources.
>
> The 2.4.20/21predrivers support LBA48
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Andre Hedrick
LAD Storage Consulting Group
Ok, from this information it would seem that the 2.4.18 kernel
will not support > 137G drives?
-----Original Message-----
From: Alan Cox [mailto:[email protected]]
Sent: Thursday, February 13, 2003 5:59 PM
To: Larry Hileman
Cc: Linux "Kernel "Maillist ""(E-mail)
Subject: RE: Question about 48 bit IDE on 2.4.18 kernel
On Thu, 2003-02-13 at 23:51, Larry Hileman wrote:
> Do the 2.4.20/21 predrivers work on a 2.4.18 kernel?
> Or have they been back ported?
No and no. The newer IDE code has dependancies on the block layer
improvements.
> [[email protected]]
>
> Ok, from this information it would seem that the 2.4.18 kernel
> will not support > 137G drives?
Is there any reason why you couldn't upgrade to 2.4.20?
--
Tomas Szepe <[email protected]>
I was asked to figure a way to get us over the 137G barrier on
the 2.4.18 kernel. Going to 2.4.20/21 can be done in parallel
and I will explain this.
Moving to 2.4.20/21 is a large effort here. If I need to implement
the larger drives in 2.4.18, I'd like to make sure that this
has not already been done and that I have the latest code.
-----Original Message-----
From: Tomas Szepe [mailto:[email protected]]
Sent: Friday, February 14, 2003 9:43 AM
To: Larry Hileman
Cc: [email protected]
Subject: Re: Question about 48 bit IDE on 2.4.18 kernel
> [[email protected]]
>
> Ok, from this information it would seem that the 2.4.18 kernel
> will not support > 137G drives?
Is there any reason why you couldn't upgrade to 2.4.20?
--
Tomas Szepe <[email protected]>
> [[email protected]]
>
> Moving to 2.4.20/21 is a large effort here. If I need to implement
> the larger drives in 2.4.18, I'd like to make sure that this
> has not already been done and that I have the latest code.
Well, the patches to the IDE layer in patch-2.4.19 & patch-2.4.20
are both relatively numerous and large, but should still be quite
straightforward to extract, given you're good with various diff
utils. The block layer changes that Alan mentions will be minimal
and probably easy to trace.
--
Tomas Szepe <[email protected]>