I just got a LSI Logic LSI7102XP-LC Single 2Gb/s Fibre Channel HBA,
and installed it in a IBM x330 (Dual Pentium III). Booting the redhat
kernel-2.4.21-4.EL and kernel-2.4.21-9.0.1.EL works fine, but the
smp-versions of the same kernels (kernel-smp-2.4.21-4.EL and
kernel-smp-2.4.21-9.0.1.EL) hangs every time after:
Loading mptbase.Fusion MPT base driver 2.05.05+
o module
Copyright (c) 1999-2002 LSI Logic Corporation
PCI: Enabling device 01:05.0 (0000 -> 0003)
mptbase: Initiating ioc0 bringup
ioc0: FC919X: Capabilities={Initiator,Target,LAN}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: 1 MPT adapter found, 1 installed.
Loading mptscsihFusion MPT SCSI Host driver 2.05.05+
.o module
scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11
Starting timer : 0 0
blk: queue f752d618, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi : aborting command due to timeout : pid 25, scsi1, channel 0, id
0, lun 0 Inquiry 00 00 00 ff 00
mptscsih: OldAbort scheduling ABORT SCSI IO (sc=f752d400)
IOs outstanding = 1
mptscsih: Attempting ABORT SCSI IO! (mf=f74e0100:sc=f752d400)
SCSI host 1 abort (pid 25) timed out - resetting
SCSI bus is being reset for host 1 channel 0.
mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
IOs outstanding = 1
SCSI host 1 channel 0 reset (pid 25) timed out - trying harder
SCSI bus is being reset for host 1 channel 0.
mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
IOs outstanding = 1
SCSI host 1 reset (pid 25) timed out again -
probably an unrecoverable SCSI bus or device hang.
mptbase: Initiating ioc0 recovery
SCSI host 1 reset (pid 26) timed out again -
probably an unrecoverable SCSI bus or device hang.
[hangs forever..]
Any advice?
-jf
I can send you update 2.05.16 mpt driver RPM's for redhat
in seperate email. Let me know if you can accept
17MB zip file. Or you can download 2.05.10-3 driver
that is available at:
http://www.lsilogic.com/downloads/selectDownload.do#a
Eric Moore
On Wednesday, April 14, 2004 2:30 PM, Jan-Frode Myklebust wrote:
>
> I just got a LSI Logic LSI7102XP-LC Single 2Gb/s Fibre Channel HBA,
> and installed it in a IBM x330 (Dual Pentium III). Booting the redhat
> kernel-2.4.21-4.EL and kernel-2.4.21-9.0.1.EL works fine, but the
> smp-versions of the same kernels (kernel-smp-2.4.21-4.EL and
> kernel-smp-2.4.21-9.0.1.EL) hangs every time after:
>
> Loading mptbase.Fusion MPT base driver 2.05.05+
> o module
> Copyright (c) 1999-2002 LSI Logic Corporation
> PCI: Enabling device 01:05.0 (0000 -> 0003)
> mptbase: Initiating ioc0 bringup
> ioc0: FC919X: Capabilities={Initiator,Target,LAN}
> mptbase: Initiating ioc0 recovery
> mptbase: Initiating ioc0 recovery
> mptbase: Initiating ioc0 recovery
> mptbase: 1 MPT adapter found, 1 installed.
> Loading mptscsihFusion MPT SCSI Host driver 2.05.05+
> .o module
> scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11
> Starting timer : 0 0
> blk: queue f752d618, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
> scsi : aborting command due to timeout : pid 25, scsi1, channel 0, id
> 0, lun 0 Inquiry 00 00 00 ff 00
> mptscsih: OldAbort scheduling ABORT SCSI IO (sc=f752d400)
> IOs outstanding = 1
> mptscsih: Attempting ABORT SCSI IO! (mf=f74e0100:sc=f752d400)
> SCSI host 1 abort (pid 25) timed out - resetting
> SCSI bus is being reset for host 1 channel 0.
> mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
> IOs outstanding = 1
> SCSI host 1 channel 0 reset (pid 25) timed out - trying harder
> SCSI bus is being reset for host 1 channel 0.
> mptscsih: OldReset scheduling BUS_RESET (sc=f752d400)
> IOs outstanding = 1
> SCSI host 1 reset (pid 25) timed out again -
> probably an unrecoverable SCSI bus or device hang.
> mptbase: Initiating ioc0 recovery
> SCSI host 1 reset (pid 26) timed out again -
> probably an unrecoverable SCSI bus or device hang.
> [hangs forever..]
>
> Any advice?
>
>
> -jf
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-scsi" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
On Wed, Apr 14, 2004 at 05:01:14PM -0400, Moore, Eric Dean wrote:
> I can send you update 2.05.16 mpt driver RPM's for redhat
> in seperate email. Let me know if you can accept
> 17MB zip file.
Yes please, 17MB zip file by email should be OK.
-jf
On Wed, Apr 14, 2004 at 11:16:45PM +0200, Jan-Frode Myklebust wrote:
> On Wed, Apr 14, 2004 at 05:01:14PM -0400, Moore, Eric Dean wrote:
> > I can send you update 2.05.16 mpt driver RPM's for redhat
> > in seperate email. Let me know if you can accept
> > 17MB zip file.
I saw the same problem with this 2.05.16 mpt driver. Now I also tried
upgrading to both the kernel-smp-2.6.5-1.326.i686.rpm from
http://people.redhat.com/arjanv/, and plain 2.6.6-rc1 kernel, and
these are also hanging with the same error:
Fusion MPT base driver 3.01.03
Copyright (c) 1999-2004 LSI Logic Corporation
PCI: Enabling device 0000:01:06.0 (0000 -> 0003)
mptbase: Initiating ioc0 bringup
ioc0: FC919X: Capabilities={Initiator,Target,LAN}
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
Fusion MPT SCSI Host driver 3.01.03
scsi1 : ioc0: LSIFC919X, FwRev=01000000h, Ports=1, MaxQ=1023, IRQ=11
mptscsih: ioc0: >> Attempting task abort! (sc=f7cccb00)
mptscsih: ioc0: >> Attempting target reset! (sc=f7cccb00)
mptbase: Initiating ioc0 recovery
mptbase: Initiating ioc0 recovery
mptscsih: ioc0: >> Attempting bus reset! (sc=f7cccb00)
btw: I also seem unable to send BREAK-t (or other magic sysrq
commands) via the serial console after this hang.. Maybe sysrq hasn't
been enabled that early in the boot, or the kernel is hanging too
hard..?
-jf
I tried the same adapter in a Dell PowerEdge 2650 (dual Xeon), and
here it worked fine.
-jf
Can you send me full dmesg boot log for the failing
system. Also is the same cables and drives being used
between this system and the other one that is failing?
Is the Dell PowerEdge having onboard mpt scsi chip?
Eric Moore
On Monday, April 19, 2004 8:01 AM, Jan-Frode Myklebust wrote:
>
>
>
> I tried the same adapter in a Dell PowerEdge 2650 (dual Xeon), and
> here it worked fine.
>
>
> -jf
>
On Mon, Apr 19, 2004 at 10:53:47AM -0400, Moore, Eric Dean wrote:
> Can you send me full dmesg boot log for the failing
> system.
Attached (both working single-cpu boot, and hanging dual-cpu boot).
> Also is the same cables and drives being used
> between this system and the other one that is failing?
It doesn't need any cabling to fail.. It fails both with and without
cables attached.
> Is the Dell PowerEdge having onboard mpt scsi chip?
No, I moved the adapter from the x330 to the Dell PowerEdge. Didn't
connect the cabling/storage when I booted this system.
-jf
On Mon, Apr 19, 2004 at 05:07:27PM +0200, Jan-Frode Myklebust wrote:
> On Mon, Apr 19, 2004 at 10:53:47AM -0400, Moore, Eric Dean wrote:
>
> > Is the Dell PowerEdge having onboard mpt scsi chip?
>
It has onboard adaptec scsi..
-jf